Assign Menu Item of Request Track to a group

Hi ,
I am assigning a group the menu item named "Request Track" . And assigning a User to this menu item. When I login with this User I am not able to see all the request that are visible when i login as xelsysadm. How can this be done ??? ... I want the USER to see all the request that are visible to xelsysadm.

Rajiv,
Thanks for your reply. What all permission are required to track any request??...
When i go to the permission of the group i am not able to see any permission starting with request* Nor i am able to assign any permission to this group starting with request* . It says
You do not have permissions or you have not selected any permissions on the following data objects:
Try again.
Requests.Task Instances
Requests.Administrators
Requests.Request for Objects
Requests.Request for User
Requests.Comments for Requests
Requests.Request for Organization
Requests.Object Instance
Requests
Requests.Organization Objects Requiring Resolution
Requests.User Objects Requiring Resolution
-Premita

Similar Messages

OIM 10g: Requests Track Doesn't show any requests status

Hello,
OIM 10g BP15:
I've created a group "oim-admin-group" ("admuser" is the member of this group).
I've assigned quite a few "Menu Items" access required for "oim-admin-group" group including:
* Track Requests menu item
Also, assigned "permissions" on all objects to this group.
However, when "admuser" logs in and perform a search on Requests > Track > Search:
he don't see any results but the message:
"Your search did not return any results. Try again. "
I added "oim-admin-group" with "read" permissions to
* Organization > Xellerate User > Administrative Group >
* Organization > ABC (User's org) > Administrative Group >
Also, in (with "read" permissions)
* Resource > "Request" > Resource Administrators
* Resource > "Xellerate users" > Resource Administrators
* Resource > "Xellerate Organizations" > Resource Administrators
However, "admuser" still not able to track requests and sees same response.
Any suggestions ?
Thanks,

Looks like the "Administrative queues" implementation could have been planned around design time. Then the requests could be assigned and managed by different roles(groups) member with different access levels in OIM.
However, in my current setup - all workflows follows this rule 1) Route the request for manager approval 2) After successful manager approval, route it for application group approval (2nd step of approval). Implementation of "Administrative queues" in this setup looks difficult to me.
Any comment?
Thanks,

My Proxy menu item

Hi
Does anyone know how to remove the "My Proxy" menu item? I have a User Group that should not have this privilege, and although I have "My Proxy menu item" unassigned under Group / Menu Items it still shows up.
I noticed a few more menu items show up regardless of if it was assigned under Group / Menu Items, such as "My Requests menu item", "Self Account Profile menu item" etc
thanks

darn, forgot the "ALL USERS" user group, "My Proxy" and a few more menu items are assigned through the ALL USERS user group

Problem when trying to add a link to the left menu item!!!!

Hi everyone,
I am trying to put a new menu group on the left menu,with a link in that group for every one.On checking with the customization guide this is what i did
for one link i did add the following lines in each of the files
1)xlWebAdmin.properties
- menuGroup.Misc-Menu=Misc Menu
- menuItem.Misc-Menu.My-Nomination=My Nomination
2) xlDefaultAdmin.properties
- menuItem.Misc-Menu.My-Nomination.link=mynomineefrm?showfrm
3) repacked the war and the ear
4) Restarted my server
When I login into the administration(xelsysadm) page I didnt see any menu item with name "My Nomination" which i am supposed to see.
secondly it shows the menu item when ever i select some group and click on assign menu item.
Moreover, when I try to assign this menu item to all users group it gives me this error
On browser it prints
Permission Denied to Assign Selected Menu Items
You do not have the permissions to assign one or more selected menu items.
on console it prints
ERROR [SERVER] Class/Method: tcDataObj/eventPreInsert Error :Insert
permission is denied
ERROR [APIS] Class/Method: tcGroupOperationsBean/addMenuItems encou
nter some problems: maoRejections:You do not have permission to insert this obje
ct.
ERROR [APIS] Class/Method: tcGroupOperationsBean/addMenuItems encou
nter some problems: Error occurred while adding menu items.
ERROR [WEBAPP] Class/Method: UserGroupMenuItemsAction/commitGroupAs
signMenuItems encounter some problems: {1}
Thor.API.Exceptions.tcBulkException
This problem eat my happy sunday :-(, any one has solution for this problem?
- Also if some one can help on how to link jsp to the new link will be helpful for me!
Thanks,
doki

Design Console > Form Information > add new
Class Name Organizations.Merge
Description Move users from one organization to another
Type menuitem
Add following to xlWebAdmin.properties, xlWebAdmin_en_US.properties
Organizations.Merge=mergeOrgs.do?Display
menuItem.Organizations.Merge.link=mergeOrgs.do?MergeOrganizations
menuItem.Organizations.Merge=Merge
mergeOrgs.button.display=Merge Organizations
Even you have to assign first to System Administrator group
First go to Manage Group
Select System Administrator Group
Select Menu Item
Click Assign and select newly craeted Menu Item and click Confirm
These are the steps to see the new menu item. To make this menu item working:
you'll have to write action class, form bean class and you'll have to create JSPs and make their entry in struts-config as welll as in Tiles-def.xml
Then your menu item will work.

How to assign script to menu item? (JS, CS3)

Hi All,
I can't find out how to assign a script to a menu item. Instead of clicking a script name in the script panel, I want to appear a menu item in the menu bar. When I click that name on the menu bar I want a certain script to run.
I've managed to put the menu item in the menu bar, but not to assign the script to it.
many thanks
marco

Hi Marco,
Here is an example:
#targetengine "kasyan"
var myScript1 = new File(app.filePath + "/Scripts/Scripts Panel/Preflight CS3 v3.2.jsx");
var myScriptAction1 = app.scriptMenuActions.add("Preflight Document");
var myEventListener1 = myScriptAction1.eventListeners.add("onInvoke", myScript1, false);
var myScript2 = new File(app.filePath + "/Scripts/Scripts Panel/Rename Sections v3.1.jsx");
var myScriptAction2 = app.scriptMenuActions.add("Rename Sections");
var myEventListener2 = myScriptAction2.eventListeners.add("onInvoke", myScript2, false);
var myScript3 = new File(app.filePath + "/Scripts/Scripts Panel/Check 100 3 SE.scpt");
var myScriptAction3 = app.scriptMenuActions.add("Check Resolutuon of Images");
var myEventListener3 = myScriptAction3.eventListeners.add("onInvoke", myScript3, false);
var myScript4 = new File(app.filePath + "/Scripts/Scripts Panel/Resize Images v16.1.scpt");
var myScriptAction4 = app.scriptMenuActions.add("Resize Images");
var myEventListener4 = myScriptAction4.eventListeners.add("onInvoke", myScript4, false);
try{
var myScriptMenu = app.menus.item("$ID/Main").submenus.item("Scripts");
myScriptMenu.title;
catch (myError){
var myScriptMenu = app.menus.item("$ID/Main").submenus.add("Scripts");
var myScriptMenuItem1 = myScriptMenu.menuItems.add(myScriptAction1);
var myScriptMenuItem3 = myScriptMenu.menuItems.add(myScriptAction3);
var myMenuSeparator1 = myScriptMenu.menuSeparators.add();
var myScriptMenuItem2 = myScriptMenu.menuItems.add(myScriptAction2);
var myScriptMenuItem4 = myScriptMenu.menuItems.add(myScriptAction4);
Kasyan

Is there a video tutorial which shows how to manually assign pages to menu items?

I have a need to build out two separate menus. In order to do that, I need to be able to manually assign pages to the menu. Thanks

Here's a tutorial on adding a Manual horizontal menu widget that should help - http://www.adobekb.com/building_your_first_website_pt07.html#addingmanual.
Basically you just need to switch to a Manual menu type through Menu options, select the menu item and link/edit its label. You add more menu items to the menu by hitting the + symbol that appears when a menu item is selected.
Thanks,
Vinayak

Why does LV(8.0.1) still track the keyboard shortcuts of disabled menu items?

Hello all,
when I disable a (super-) menu item, the submenu-items are grayed out as expected. But they still accept their keyboard- shortcuts. Is this a bug in LV? If I explicitly disable the submenu- items, all works fine, but the simple method would be nicer and comprehensibly.
I made a VI to illustrate.
Greets, Dave
Message Edited by daveTW on 05-11-2006 01:56 PM
Greets, Dave
Attachments:
Menu with shortcuts.zip ‏37 KB

Hi Dave,
it seems a bit strange but at the end it is a absolutely correct behaviour. If you deactivate a menu item than all sub-menu items are deactivated in the menu bar. But that is only a feature of the menu bar. To disable the short cut you have to deactivate the sub-menu item itself. In you zip-file the <STRG - C> is deactivated but the <STRG - V> still works. That depends on the settings in your test3.vi where you defined the items to be disabled. If you add "Paste" to the array of items or if you disable all items then the shortcuts will be disabled as well.
Best regards,
Carsten Sprung
Application Engineer
National Instruments Germany

MSS menu Personnel Change Request

Hi all,
I have the MSS portal role assigned to me. Problem is my MSS menu <i><b>only</b></i> includes Overview and Reports, but need it to also include Attendance, Employee Review, Personnel Change Request, etc. How to I add those menu items under MSS? (mainly concerned about Personnel Change Request at this point).
I've seen a screen shot of another system, and insted of MSS it shows "My Staff", then has the Overview | ... PCR. My Staff is the same as MSS, correct? I just need to know how to get PCR to appear under my MSS menu.
Thanks!

Hi
PCR should be available on the Standard MSS role.
Please check with your Portal admin, if PCR workset in made available for your user. Also make sure you have the end user permission and the needed access to use this iview. Hope this helps
-Mike

Error while calling a form from another form's menu item

I created a main form and menu module for this form.
I am calling another form from main form menu item.
i moved both the forms and menu and compiled them.
But, when i run this form i am getting an error saying
FRM 92100: Your connection to the server was interrupted
This may be the result of a network error, or a failure on the server.
You will need to establish your session.
I set the seperateframe = true
networkentries = 30
But still getting the same error.
Is there any parameter that i am missing.
I will greatly appreciate if anybody can direct me to the solution.
Thank you.
Navya.

Hi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit

A top level menu item should display its active state if any of its submenu items are active

Example case: I'm designing a Muse site which is basically a portfolio of our work. We design books, doing page layout and covers. We have numerous book categories and sub categories which I put in a horizontal menu. When a given top level category menu item doesn't have a submenu, it is a hyperlink and it displays active state when the browser displays its linked page. But when a given page is displayed from a submenu link, its top level menu item does NOT display active state. I think it should.
For example, we have a "Nostalgia" category which has "Film" and "TV" subcategories. Because the menu item, "Nostalgia" has a submenu containing "Film" and "TV", the label "Nostalgia" is not a hyperlink. The submenu attached to it has the two hyperlinked items "Film" and "TV". When the browser is displaying either linked page, the submenu is hidden. So it would be nice if the top level item, "Nostalgia" would display in an active state.

Hello Daniel,
As of now this feature is not there in Adobe Muse.
I would suggest you to please log this as a feature request in our "Ideas for features in Adobe Muse" section. (http://forums.adobe.com/community/muse/ideas)
Hope this helps.
Regards,
Sachin

Is it possible to add a single Entry Point menu item to a LabVIEW OI menu?

Using the "TestStand - Insert Commands in Menu (Application Manager).vi" library VI, I can add all Configure menu items to a menu with the "CommandKind_ConfigurationEntryPoints_Set" option for the "Commands" input. But the VI is missing an "Index" input to specify a single item from the collection. (UnlikeThe "AplicationMgr.ConnectCommand()" function, which allows you to specify a single item with an index.)
The issue is the same for Execution Entry Points and Tools as it is for Configuration Entry Point--I can create a menu containing the entire collection, but not a single item. I tried to delve into the VI to change it to allow specification of individual commands using an index using the Commands.Insert() function instead of the Commands.InsertKind() function, but without success.
As an aside, even when I add all Tools to a menu (using CommandKind_Tools_Set), TestStand exits with a warning that 12 "RunTimeMenuItem" objects were not released. I'm wondering if I should be using the Engine.GetRunTimeToolMenuItems interface instead. But if that's the case, I think I have to build the menu myself and can't use the TestStand library VIs to automatically run commands when their corresponding menu items are selected. Maybe this is just a bug in the TestStand VIs?
I am using TestStand 2010 SP1 with LabVIEW 2014.
Any advice would be appreciated. Thanks.
-Jeff

I am closing the TestStand Engine, VI Refnum, Quit Application event, and Event Callback, just like in the example. I get the TestStand unreleased reference error only if I call that VI to include the Tools menu. The fact that the unreleased objects are "RunTimeMenuItem" objects also implies to me that the problem is specific to the Tools menu items. Since Tools menus seem to have their own API (which involves RunTimeMenuItems), it seems to me that the VI (or the TestStand Engine?) is doing something with RunTimeMenuItems that I can't see, and is somehow losing track of them (because that VI gives me no visibility to any RunTimeMenuItem objects). Is it possible that one should explicitly use RunTimeMenuItem objects instead of the menu VI when dealing with Tools menus? (Maybe the error is due to my using TestStand 2010 SP1 on Windows 8.1, for which TestStand 2010 SP1 is not officially supported?)

The vendor code is not coming against some Assignment line items with the

Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
Ram

HI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth.

Acrobat Forms - Make fillable text box appear after box checked or drop down menu item selected

I have been asked to build an approvals form for my workplace however the approval processes vary considerably depending on the subject. I have been asked to create a list of topics in the form of check boxes or a drop down menu which will then populate a list of text boxes with differing approval authorities and corresponding spaces for signatures. i.e. if 'Topic 1' is selected a list of names and signature spaces will appear, however if 'Topic 2' is selected a different list of names and signature spaces will appear instead.
In order to achieve this I think I only need to find out how to link check boxes or drop down menu items to the appearance of different text boxes.
I should also add that I am a beginner with this stuff.
Thank you very much for any help you can provide.

Remove the red coloured part
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible {
left: auto;
top:0;
or start again with the original SpryMenuBarHorizontal.css and follow the rules as in http://www.dwcourse.com/dreamweaver/ten-commandments-spry-menubars.php#one.
Either way will get you back on track.
Good luck.
Ben

VBA Code for Excel Add-in Menu Items

Howdy.
Every month my team needs to execute the same process on a couple hundred documents. It's time consuming and inefficient to say the least, so I'm looking for a means by which to call a couple of the menu items on the Excel BPC Add-Ins menu via VBA. Specifically, Park'n'Go; Expand All; and Send and Refresh Schedules.
Basically what happens is this:
Open File
Set Park'n'Go to Live
Expand All
Refresh and Send Schedules
Set Park'n'Go to Offline
Save
Exit
Loop
I know how to loop through the files and directories, I just don't know the commands for the functions from the menu via code. The macro recorder can't help me, and I've even tried to mimic a user's actions by using mouse coordinates and clicks, but that doesn't work b/c it doesn't allow for the necessary load time from BPC.
Any help would be extremely appreciated.

Hey Jeff,
here are some vba commands that may help you.
Open a certain file: (you can assign "Path" to a button or range)
Dim Path As String
Path = Application.GetOpenFilename("All Files (.),.")
Opening the Park 'n Go dialog box:
Application.Run ("MNU_ETOOLS_PARKNGO")
Expand All:
Application.Run ("MNU_ETOOLS_EXPAND")
Sending data and refreshing the workbook:
Application.Run ("MNU_eSUBMIT_REFSCHEDULE_BOOK_REFRESH")
Saving a file OFFLINE:
Dim FName As String
FName = InputBox(prompt:="Please enter filename")
If FName = "" Then
Application.DisplayAlerts = False
ActiveWorkbook.Close
Else
ActiveWorkbook.SaveAs Filename:="c:\" & FName
ActiveWorkbook.Close
End If
Application.DisplayAlerts = True
Hope, that will help you
Karsten

ITunes menu items grayed out

I've had this happen with previous versions of iTunes and now with the most recent version of iTunes (running OS 10.7.2) all the iTunes Menu items are all grayed out, as well as all the other iTunes menues, with less than a hand full of commands availabe. Since the Quit iTunes is one of the options grayed out I've had to force quit iTunes and even after a relaunch the menu items continue to be grayed out. In search the Apple Communities for this subject I found references to this problem going back to 2008 and no one has offered a solution. One of the suggestions was to run Disk Utility and repair permissions, which I have done and it didn't solve the problem, but I hadn't restarted iTunes which I again did by force quitting, and on relaunch all the options are back working as they should. Not sure if repairing the permissions had any effect on iTunes as none of iTunes permissions were repaired, just scanner and printer permissions.

I have this same problem and it's very annoying.
What happens is this: I'll be happily editing my library when, after an edit, it suddenly becomes impossible to select "Get Info" to edit tracks. The menu item is grayed out and Command-I just gives a warning beep.
At this point, it is also impossible to Quit iTunes as that menu item is also grayed out and Command-Q also gives a warning beep.
One thing I have found is that I can still quit iTunes by right-clicking on the dock icon, obviating the need for a force quit.
Another symptom: the iTunes dock icon is constantly jumping up for things that it didn't used to jump for.
I've tried deleting the preference file. I haven't tried moving the library and library.xml files and rebuilding them, mostly because I've got 380GB of music on an Airdisk and it would take an eternity to rebuild the library.
I'm really fed up with this and have no idea what to do.
For what it's worth, the behavior started on my old machine running Snow Leopard and has continued after a clean install (albeit with iTunes information copied over) on a new machine running Lion (now 10.7.3).

Assign Menu Item of Request Track to a group

Similar Messages

Maybe you are looking for