Assign meter that already created from PM to rental object

Dear Expert,
Please kindly advice on how to assign the meter that already created (already has the measuring point ) into pooled space or rental object.
When I use REBDRO --> Meter Tab
the transaction allows only creation of new measuring point , Field Measuring Point is disable and allow to assign internally from the system
Best regards,
Tima

Hi Tima,
            I dont think it is possible to assign the measuring point already created to RE Objects. As, if we go to transaction IK01 we select the Measuring point object as "IME" and then select the object type and ID. If we use any other measuring point object we dont have the option to enter the Rental object type and rental object ID to create the measuring point. So any measuring point created with any other Measuring point object cant be attached to the rental objects.
Even if we directly create measuring point from rental object, the object is created with "IME" Measuring point object.
Regards,
Deepak M

Similar Messages

  • How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

    How can I edit material from 1 or more dvds that I created from my own filmed material in iMovie but which I no longer have in iMovie

    You need to 'reverse engineer' them :
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • I have error while testing the system created from a sap business objects template in SAP portal

    I have error while testing the system created from a sap business objects template in SAP portal. Error text:
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
    I configure integration SAP portal and SAP BW system. All system requirements are complied.
    Environment
    SAP Business Objects 4.0
    SAP BW 7.31
    1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
    2.     Next I setting integration SAP PORTAL with SAP BW system
    3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
    4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
    5. Select Export entry button and binary format file certificate for download. Press download.
    6.     Save certificate file in local PC folder
    In next step need export certificate file to SAP system. Sequence of step:
    1.       Run STRUSTSS02 transaction .
    2.       Chose certificate ->import.
    3.       Select downloaded certificate file
    4.       Select Add to certificate list button and Add to ACL button
    5.       Inter System ID and Client(000)
    6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
    7.       Result – downloaded iview.
    8.       In next step I create system from template. System administration->system landscape.
    9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
    10.   When I created the system and test the connection error occurred: See screen_3
    This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

    Did you find a solution?

  • Add a note to a Calendar event that was created from Mac Mail

    When I create a Calendar event by clicking on a date within a Mac Mail message (you hover over a date in an email it draws a dashed box around the date and gives an option to create a Calendar event).  It creates an Event in my Calendar with the following fields:  Subject, Location, Date Time and alert fields, Invitees and a link to the mail message.  But - I can't seem to add a Note Field.  The only work-around seems to be to manually create a new calendar entry.
    Does anyone know how to modify an event created from Mac Mail to add a Note Field?
    iMac Retina 5K 27-inch Late 2014, OS X Yosemite Version 10.10.3, Calendar Version 8.0 (2034.9), Mail  Version 8.2 (2098).

    Thanks Brett for replying, but this doesn't work if the event is created by Mac Mail - which is my issue.  Sure it works with any other event but not one that has been created from within Mail.  If this is a bug I'm sure the Calendar people point the blame at the Mail people and vice versa but that doesn't help me.  But before I submit a report to Apple I thought I would see if I might be missing something obvious.
    See the attached screenshot of an event that was created by Mac Mail. There is no Add Notes field when the event is Double Clicked, Right Clicked or any other form of click.
    Graeme.

  • Urgent, how to insert un Idoc (already created)  from outside of SAP

    Hi to all,
    I would like to know how to insert an Idoc (alresdy created) from outside of a SAP environnement into SAP.
    I know via the code we20 we could insert an Idoc into SAP, does someone have a file PDF to explique how to do it step by step plz?
    or could you reply it in details step by step?
    caz we are doing a project and we know almost nothing about it, but we need the information urgent.
    Tks in advance

    Hi,
    i think you have missed some of the some of the columns having NOT NULL constraint.ex:Who Columns..
    Please check the same in the table..
    Thanks
    Bharat

  • Page numbers display as 5 of 1 and 2 of 2121 in a PDF that was created from a Word 2003 document

    We merge several Word 2003 documents into 1 larger document that we then convert to PDF.  The page numbers in the Word document display properly - 1 of 21, 2 of 21, 3 of 21, etc.  We then convert that merged document to PDF by right-clicking the filename and choosing "Convert to Adobe PDF".  For those of us with Adobe Acrobat Standard 8.1.3, the page numbers in the converted PDF file display as 1 of 1, 2 of 1, ... 21 of 1.  Those with Acrobat Professional 8.1.3, they display as 1 of 21, 2 of 2121, 3 of 212121, etc., each page adding another total number of pages to the total.  There is no change in the result if using v8.0.0 or 8.1.4  Does anyone have any ideas???

    Unless you have a specific reason to upgrade to OFFICE 2007, I would not recommend it. I hate it -- have it on two computers. I have had problems creating PDFs reliably from WORD 2007 and PPT 2007, at least with graphics. The conversion seems to want to split graphics up into several parts rather than leave it as one. It does not happen with WORD 2003 and so assume this is some sort of issue with OFFICE 2007. You can get the graphics fine if you use the MS plugin for PDF creation, but then you have to deal with the MS version of a PDF. If you want to try it on one computer in your office, I would do that before you make the change. However, if what you have meets the need, then why change unless there are specific items that you are looking for and don't have.
    OK, that is my opinion. I am sure there are counter arguments. If I had the preference on my newer machines, I would have OFFICE 2003. Bill

  • I'm using iphone 4s now.Can i find back the picture that already delete from iphone?

    Can i find back the picture that is already delete?

    No.  I mean restore from backup.
    iPhone User Guide (For iOS 5.0 Software)

  • To set up my apple TV in Hong Kong do I need to have an apple ID that was created from HK?

    I'm setting up my new apple TV here in HK, when I go to turn on home sharing it won't let me login via my existing Apple ID which was created in the States.  It just keeps telling me I have incorrect user/password when I know it's correct.  I could just create a new apple ID from HK but then I won't have access to all the music I've previously purchased.

    There is no web browser on the ATV, as a result, it cannot be used with such Internet connections.
    Contact whomever provides support for the Wi-Fi service, they may be able to add the ATV to a whitelist to allow it to connect.

  • How do I delete ringtones on my iPhone 5 that I created from songs in my iTunes music library?

    I created several ringtones for my iPhone 5 from songs in my iTunes music library but they are only 1 second long.  I need to delete them and recreated them so they are 30 seconds long.  How do I remove them from my iPhone and iTunes?

    No -- an iTunes sync has no effect on photos in the Camera Roll; each time you sync using iTunes it sets the non-Camera Roll photos on the phone to match the current iTunes setting/selections.

  • Transfer songs from a ipod mini that was created from another account

    I bought a used ipod mini that came loaded with over 400 songs which I would like to add to my itunes MAC account. The ipod mini is in Windows format and I understand that at sometime in the future I will have to restore the ipod mini in order to convert the device from Windows to MAC format thereby losing all the songs and data that are currently on the ipod. My itunes level is 7.6.1. I am running OS X 10.4.5.
    Is there any way to transfer or upload the songs from this device to my IMAC itunes account even though the songs were purchased and downloaded to the device by the original owner using his Windows itunes account.
    Thank You.

    Since you did not purchase the songs, they are not legally yours to keep.

  • Where does WL keep my Java files that it creates from JSPs?

    Hi,
    I'm using WL 9.2.2 on Solaris 9 (JDK 1.5). When WL builds a JSP page, it presumably converts those JSP pages to Java files before compiling them. Where does it keep those Java files? I'm having a hard time figuring out where my NullPointerException is occurring ...
    java.lang.NullPointerException
    at jsp_servlet._jsp._groups.__addgroup._jspService(__addgroup.java:810)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:394)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:525)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:398)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at com.myco.nps.im.plugin.NPSIMIntercepter.forwardRequestDirect(NPSIMIntercepter.java:852)
    at com.myco.nps.im.plugin.NPSIMIntercepter.doFilter(NPSIMIntercepter.java:193)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Thanks, - Dave

    It deletes them by default. If you want to preserve them, set the "keepgenerated" and "working-dir" (this one so you don't have to hunt for them) elements in the "jsp-descriptor" element in the weblogic.xml file.
    [http://e-docs.bea.com/wls/docs103/webapp/weblogic_xml.html#wp1038491]

  • I have photos that are rotated within a photo stream created from a project even though the photo displays properly within the project. How can I get the photos to have the proper rotation within the photo stream?

    I have a photo stream that was created from a subset of photo from a rather large Aperature project. Some of the photos show up rotated within the photo stream but are not rotated within the project. Why is this happening and how do I fix the rotation within the photo stream? I do have the latest version of Aperature and have all of the necessary updates applied to my devices used to view the photo stream. The photos do show up rotated within the photo stream segment of Aperature, so I am sure it is not an issue with the output device (iPad and Apple TV). I do know that I cannot edit photos within a photo stream, but no amount of editing within the project allows the photos to be properly rotated within the photo stream. All help would be greatly appreciated.

    That will work, but it is the long way 'round.
    As Frank noted, Book Albums are just specialized Albums.  Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image.  You can put your Albums anywhere (in a Folder called "Books" for example).  You can put Images from anywhere in your Library in any Album.
    The easy way 'round:
    - Make a new Book Album
    - Select Images you may want to put in your Book.  Flag them.
    - Select some more.  Flag them.
    - Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
    - Repeat as needed, or just drag-and-drop directly into the Book Album.
    Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key.  This _does not remove the Image from the Project that contains it, or from the Library.
    Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication.  The Book Album contains the superset of Images with which you populate the Book itself.  The Book Album also holds the Book.
    A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
    The User Manual is helpful.  Here is
    the chapter on making Books. 
    From that chapter, here is
    the section detailing how to create and populate a Book Album.

  • User does not appear in group created from SAP role

    Hello --
    I have a user that has logged into InfoView successfully with SAP authentication and is showing in the CMC under the "User List." When I view the list of users in the group that was created from the SAP role he was a part of, he is not there.   When I go to the user account and view "Member of," the group IS shown in the list. 
    Any idea?  Any way I can "refresh" the group or anything like that?
    Thanks
    Casey

    Thanks for the replies.
    We are on XI 3.1 FP1.8 and we do have a CMS cluster.  Server reboots this weekend seem to have resolved the problem. I am curious why this question was asked, though:
    "Did you reassign the user to another SAP role after the user has already logged at least once in the InfoView?"
    Is this something that could have caused the problem or is it a possible workaround if we run into the issue again? 
    Thanks again...
    Casey

  • Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

    If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
    SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
    site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
    Office/365) system and create a new site from the that template you get the same issue.
    Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
    for me.
    Earllibby

    Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.  
    BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
    Earllibby

  • How can I get rid of shimmer effect in videos that I create in iMovie?

    How can I get rid of shimmer effect in videos that I create from photos in iMovie?

    Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
    But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
    As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
    Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

Maybe you are looking for