Assign more the one workspace to a developer account

I have run into a stumbling block in setting up my accounts for Apex that seem to conflict with the training class I just took
I want to assign more then one workspace to a developer.
On page 1-16 of the oracle class manual it indicates that you can assign more then one workspace to a developer. On page 1-16 it depicts user 'A' having access
to Wkspc1 and Wkspc2.
However when I login as admin or the workspace admin and I click 'create' there does not appear to be a way to assign more then one workspace to the account.
It appears you need create the same account(e.g. dev01) under each workspace. That is you create the same account for each workspace and can give it the same password.
So you end up with more then one account with the same name assigned to each workspace. Create dev01 on wrkspc1 then create devo1 on workspc2 etc.
Is this correct? This doesn't seem right.

Hello,
are given access to only one workspace at a timeCorrect
are created in Apex only(not db)Well Apex runs inside the DB...so yes the accounts are created in the DB, however they are only accessible (and meaningful) from within Apex. You can't login to the DB via SQLPlus using Workspace credentials for example.
can not use a db account to login as a developerCorrect
to access more then one workspace at time the account must be
created seperately in each workspace.Correct
if the applications are db account authenticated ....Correct.
if the applications are apex account authenticated then a different user account...Correct
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com

Similar Messages

Can I assign more than one Pricing procedures to the one vendor.

Hi Gurus,
Can I assign more than one Pricing procedures to the one vendor.
If possible, where it can assign &give the procedure.
My client requirement is :
Vendor supply the goods from two different countries. So, pricing procedure is different because taxes are differ in two countries and currency also differs.
If goods are supplying from country u2018Au2019 ,automatically pricing procedure for that country was trigger. How the system know , which pricing schema is required.
Give me solution

Hi,
Extend your vendor to new purchase organisation. Assaign new pricing procedure to this Purchase organisation.
Use different Purchase organisation while creating POs for the same vendor procuring from different countries.
Regards,
Satya
Edited by: Penjarla Venkata Satyanarayana on Aug 28, 2008 4:21 PM
Edited by: Penjarla Venkata Satyanarayana on Aug 28, 2008 4:23 PM

Can we assign more than one fieldgroup to a single event ?

Hi,
Can we assign more than one fieldgroup to an event ?
I want pick few fields from each tab and show all those fields in my own tab is it possible to do so ?
vishal

Hello Vishal,
To show together fields which belongs to different tabs (this is, in the same event), you could use Multigroup feature (Application Elements -> Tab Page Group -> Multigroup). This feature allows you to group several events (with different field groups associated in main layout table) in only one (the even which manages the tab).
Hope this point help you.

How to assign more than one inter-company customer?

Hi
I'm new to Inter-company sales process. Recently I configured and tested the inter-company sales process in the system and is working perfectly.
My Question: How can we assign more than one customer as inter-company customers to a sales organisation? In the standard process we are only able to assign one customer at a time as inter-company customer. Could you guide why this is?Does any one ever got such a requirement in project?
Regards
Sanjay

Dear Reazuddin,
This is my client requirement. (Detail Missing in the question:: 7 Companies, 4 sales organisations, 6 Plants/facilities.)( It is involved in a lot of intercomany transactions. It wants its customers from its sales territories to be able to place order from the sales org. under that territory.) I do not know why does SAP not allow us to assign more than one inter-company customer?
Regards
Sanjeev
Edited by: winhearts kr on Nov 22, 2010 4:14 AM

Purpose of assigning more than one budget to a project

Dear Members,
In Oracle Projects Costing module, system allows us to assign more than one budget to a particular project.
Can any one please tell me what is the real time requirement and the purpose of this functionality.
Many thanks in advance.
Best Regards.

Hi
Different budget types may be related to different managerial processes.
Examples -
For contract project you may setup a budget type to represent the amounts presented and approved by the customer, and set another budget type for internal management, may be with more granular budget entry method.
Companies may set the initial budget of the project, and not allow to update that. The use another type to represent more recent update of the project forecast. Then compare the forecast to original budget.
There could be separate budgets to control parts of the project costs. Like using a budget only for controlling external expenses. On that you enter budget amount only for materials, outside processing and sub-contracting expenditure types.
Dina

Can we assign more than one sales org to one company code ?

can we assign more than one sales org to one company code ?
or one as to one only ?
why sales org is assigned at company code level why not on plant level ?
regards

Multiple sales organizations can be assigned to company code.
Company code is the highest organizational unit and plant and sales organization are assigned to it.
In the logistics module, Plant is the highest entity in the MM module and Sales organization is the highest entity in SD module. Basically with this assignment of plant and sales org to company code all the financial accounts are updated.
Assigning of Sales org to company code and not to plant is the standard functionality that helps map most business processes.
Regards
AK
Reward points if helpful

Assigning more than one sold to party

Hiiiii..
1) i would like to know whether we can assign more than one sold to party to a contact person.....?
regards,
sanjana

Hi sanjana,
Yes, in CRM ofcourse you can assign more than one soldto parties to a contact person.
You jst need to maintain relationships.
But in R/3 the same is not possible.
Best Regards,
Pratik Pate.
Reward with points if it is of any use to you!

Can we assign more then one abap system to one bpc server?

Hi my question is short an d simple.
can we assign more then one abap system to one bpc server?
Regards Stefan

Stefan,
My understanding is that this is not possible. However, I believe you can have multiple BPC .NET servers and point them to different dialog instances of the same ABAP system. You would then put a load balancer in front of the .NET servers and requests will be distributed across the ABAP dialog instances.
Ethan

Assigning more than one G/L account to transaction key WRX

Can any one tell me where we can create General Modification keys in MM-FI integration
As i need to assign more than one GL account for transaction key WRX (GR-IR)Clearing account.
There may be one valuation grouping code with different General modifications thereby we can assign more than one G/L account to WRX transaction key.
Example:
Valuation grouping code or valuation modification = IN
General Modifications: I01,I02,I03,I04..
General Ledger Accounts: 240940000,240940001,240940002,240940003
IN I01 240940000
IN I02 240940001
IN I03 240940002
IN I04 240940003
But , I am unable to find, where we can define these general modifications ( I01,I02,I03)....
If any one knew please let me know...
Ramesh B

Hi
Tcode: obyc, double clickon WRX event key, slect Rules ....you can find General Modification option>
REgards
ss
Assing the points if useful

Problem with Assigning more than one value to GROUP dynamically

Hi,
I have a problem with assigning more than one value to GROUP varible dynamically.
I am able to assign only one value dynamically through Initialization block
I have even tried with the ROW-WISE initialization blocks..
using this query..
SELECT 'GROUP', G.GROUP_NAME
FROM GROUP_MAP G
WHERE G.USER_NAME = ':USER'
if GROUP_1, GROUP_2 are two groups to be associated,
through this, i'm getting " GROUP_1;GROUP_2 " into GROUP variable ( seen from Narative view )
And the properties and securities of this Groups are not inherited.
Please let me know if there is any other way to Populate the GROUP variable dynamically with more than one value.
Thank you.,

Hi,
i finally got in this way..
i had created a function which takes USER_NAME as input and returns a string that contains the GROUP names with semicolon delimeted..
Though it is same as that of ROW-WISE initialization,
the properties of those groups are also being inherited..
Now, i can assign more than one groups and its properties to a user dynamically.

How can we assign more than one request group to a responsibility?

Hi
Can anyone tell me how we can assign more than one request group to a responsibility?
Thanks
SS

Hi SS,
Its not possible, rather you should create a combination of Requests/RequestSets and create a new Request Group.
Regards,
Kiran

Assigning more than one G/L accounts to WRX

Hi!
I want to assign more than one G/L accounts to WRX, I knew that it can be done through general modification. I have defined like below:
Valuation           General                   G/L accounts
Modification        Modification
IN     I01     240940000
IN     I02     240940001
IN     I03     240940002
IN     I04     240940003
IN     I05     240940004
IN     I06     240940005
IN     I07     240940006
IN     I08     240940007
IN     I09     240940008
IN     I10     240940009
IN     I11     240940010
But i don't know how to assign these general modification to valuation class/movement types based on which GR/IR account has to be selected.
please guide me..
points will be rewarded...
ramesh

Dear Ramesh ,
For a Transaction WRX you have to link Valuation Maodifier , Valuation class & GL Account No.
Typical Assigning will be as below
CAcct   Trans   VG      AG   Vclass   G/L Debit   G/L Credit
INT       WRX    0001   VBR 3000      400000      400000
If useful reward points,
Vivek Maitra
Edited by: VIVEK MAITRA on Dec 24, 2007 12:27 PM

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downlo

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downloaded or ordered anything. Can you assist?

Download/install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html and activate it with your serial number.

Get more the one records in procedure by using out parameter

Hi good evening every body,
how to get more the one records in procedure by using out parameter ,
give me one example of it.
regards
subba

Like this ?
SQL> set serverout on
SQL> declare
2    v_empno dbms_sql.Number_Table;
3    v_ename dbms_sql.Varchar2_Table;
4    PROCEDURE P1(p_in_deptno IN emp.deptno%TYPE,
5                 p1_out OUT dbms_sql.Number_Table,
6                 p2_out OUT dbms_sql.Varchar2_Table) IS
7    BEGIN
8      SELECT empno, ename BULK COLLECT
9        INTO p1_out, p2_out
10        FROM emp
11       WHERE deptno = p_in_deptno;
12    END;
13 BEGIN
14    P1(20, v_empno, v_ename);
15    FOR i in 1 .. v_ename.COUNT LOOP
16      dbms_output.put_line(v_empno(i) || '--' || v_ename(i));
17    END LOOP;
18 END;
19 /
7369--SMITH
7566--JONES
7788--SCOTT
7876--ADAMS
7902--FORD
7941--ABCDEFGHIJKLMNOPQRSTUVWXYZAAAAAA
7942--MY#@ ' "ABC
PL/SQL procedure successfully completed.
{code}

More then one student license on same account

Hello. Can i have more then one student license on same account. The 60% of thingy. One for home, one for work and one for the notebook. They may run simultaneously because of the friends using the computer. All 3 computers will use same account name and password.

You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing btw which we have for our prepetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
As it stands, the EULA states that you can install it on up to two computers at a time, however, you cannot use applications on those computers simultaneously. This is the case even when you are not using the same application
http://www.adobe.com/legal/licenses-terms.edu.html
Regards
Rajshree

Assign more the one workspace to a developer account

Similar Messages

Maybe you are looking for