Assign NODIM[] directly on KF

Hi,
Is there a way to apply the NODIM{} directly on the key figures?
Currently, I had to set the KF in the query and then create a formulae so that the NODIM[] can be applied on that KF.
As such, I had to perform 2 operation for the KF.
As the User does not want to see the Units, I had to do the same for the rest of the report KF.
Is there a better way to handle this?
Thanks

Hi,
If user don't want to see Unit on report, you can create KF without Unit/Currency in RSA1 and use it. However, If this KF have to belong Unit, It's no way without use NODIM function .
Hope this helps.
BR
TRUC

Similar Messages

Assigning hours directly to a WBS without Network and activities

I am setting up a Capital project without the use of activities and Networks. Thus confirmation will be assigned to WBS.
Can hours confirmations form CATS be assigned directly to the WBS without the use of Activities?
As I understand you need to set up the Data entry profiles
Your help would be greatly appreciated
Thanks
Johnny

Hi Johnny,
Yes, set up a data entry profile which accepts the WBSE as receiver, create a simple HR personnel number & start your postings. It is this simple.
You can test the same in your dev system. use CAT2 / CATS_APPR_LITE / CATA Tcodes.
Find the actuals on WBSE in standard reports.
regards

Assign direct material cost to value field in copa while issue to Prod orde

Dear All,
My requirement is like this:
There are some 16 material groups from A to P each containing some materials(finished goods).
I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
Pls explain me whether we can do it. if yes how?
Thank you very much in advance.
Regards,
Vishnu
VST-IT.

PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
Similarly, overheads are recorded in CCA and needs to be analysed there.
If one goes against these big groupings in SAP, you always run into problems.

Can't Directly Rate my Images using Stars in Adobe Bridge CS3

Hi
I can rate my images in Adobe Bridge CS3 by using the drop down 'Label' menu. However, I cannot rate my image by stars directly under my image thumbnails as my book suggests I can. The book states: "You can also assign stars directly under the thumbnail by clicking on the dots".
Is there anyway I can do this? Do I have to change some preferences?
Many thanks in advance for anticipated help.

try resetting your preferences by holding Ctrl right after you launch Bridge(you have to be fast, you'll get a dialog box if you succeeded)
Though you'd need to do this only if you are doing it correctly in the first place. With a picture selected you'll notice 5 small dots beneath its thumbnail which you can click on to rate things. If you don't see the dots then increase the thumbnail size by adjusting the slider at the bottom of the screen

How do I use directional PDA buttons in LabVIEW programs?

Hi all,
I've been assigned to get a LabVIEW program to work on a Palm PDA with LabVIEW 7.0 and palm PDA module 7.0. I am basically totally new to LabVIEW, and my possibly very simple problem is, the PC program requires input from a serially connected number pad for the 8, 4, 5, 6, and 2 keys which are used as four directions (8, 4, 6, and 2) and an enter (5).
I am trying to rewrite the input vi to use the directional buttons and middle enter button on the PDA itself but am having trouble figuring out what to use. I am using a PDA simulator because of the PALM OS5 we own. The input demo vi example provided will not build for PDA because of size so I am unsure of how to approach this. Another thing is, we have LabVIEW and PDA module for pocket PC 8.0, and a Dell Axim PDA on order. From what I understand off of this website, the latest PDA module has example button vi's. I would still like to figure out the way to do this on 7.0 so I can have a better understanding of LabVIEW. Eventually the program's endgoal is to be used on a PDA and inputting with a bluetooth keyboard, but we are going step by step right now.
I guess my biggest questions are, how do I assign the directional buttons on the PDA in my program, and will this differ greatly when we switch to 8.0 and pocketPC.
Oh and I did try to look at the example asteroid.vi but from looking at the input subvi, still couldn't figure out how they assigned the buttons.
Thanks,
Stephen

I can't help with any specifics (no access to the PDA module at the moment and I didn't use the buttons anyway), but I would like to say that it probably would make a big difference if you used LV 8. 7.0 was the first version of the PDA module and was extemely limited and problematic (it didn't even have a tab control). 7.1 was somewhat better and I understand that 8 is even better (although still very limited and buggy).
I also remember reading about several differences between Palm and PocketPC and I think you will generally be better off with the PocketPC as it's related to windows and will probably support more stuff.
Try to take over the world!

Assigning a task back to the person who created it?

Hi,
Scenario
Person A creates a task
Developer B writes code
Developer B wants to assign the task to the person who created it
pr. today we must find the name of the correct person and assign it back.
Is there any possibility to assign it directly to the person who createt it?
like a tag, @created by

Hi, thanks for the reply.
I was thinking more of a way of doing this directly in the dropdown box "assigned to", the creator could be given a tag like @created by?
Is that possible and if so where do I do the changes?

FI Payment Release Workflow Agent assignment and SPRO settings.

Hi Experts,
I am working on Payment release workflow for 2 stages. So for this i have activated the main workflow WS00400012 and for First level release WS00400011 and for second level release WS00400021.
Now where should i assign the agent for First level release and second level release ? and what setting should i do in SPRO as FI settings.
Any of you suggestions will be of great help me to resolve this issue.
Regards,
Hari

Hi,
Thank you for your reply.Should i mention the main workflow number in SPRO or
just the subworkflows alone ?.
Assign main workflow number
Can i assign users directly in workflow itself insteas of assigning position in SPRO.
Don't assign users inside the workflow, if the user id you want to change then again you have to change the workflow.
Regards,
Surjith

InCopy/InDesign CS3 Assignment Problem

Hello everyone--
For the past three years we've used Version Cue CS3 for workflow on our publication. For the most part its worked fine. Recently though, we've had to get a new computer for an office on the West Coast and a new router on our office on the East Coast (the operating system we use on the East Coast is Windows XP Profesional.) The computer on the West Coast is running Windows 7, and it seems InCopy CS3 installed on it without a problem--until it came time to do our publication.
The way our system is set up is the West Coast machine uses a VPN tunnel to see our network here--so all it really has to do is connect to the Version Cue server's IP address. This set up worked fine when the machine was a Windows XP based machine, but since the changeover, InCopy doesn't seem to be reading the assignment files correctly. For example, on an Indesign File the copy fits fine and dandy in the layout, and the assignment looks okay when I open it up on InCopy over here. When InCopy opens it up on the Windows 7 machine, the body copy is invariably 3-5 lines over and any formatting changes made from the Windows 7 machine, like changing words to italics, won't be reflected on the updated assignments file. (I confirmed this by emailing our West Coast editor the assignment file directly and InCopy CS3 still wasn't reading it correctly.) Also, at one point we apparently lost some big changes made over the weekend but changes like new headlines held. Any ideas on why this is happening?
Also, and I'm not sure this is related, but since we installed our new RV082 router, we've been getting strange "Version Cue server offline messages" every so often, and then when we go into a project Version Cue suddenly reads it as "online and connected" again. InDesign CS3 often hangs whenever we try to open up a file on the Version Cue server. The only way we've been able to get InDesign to start up is to delete the recovery folders and synchronize everything first--this, needless to say, has been a bit of a time waster.
All our programs are CS3 and except for the West Coast machine, all are running Windows XP pro.
Thanks for your help!

We are installing and using the software under the administrator logins.
My main concern is that we purchased computers that have a processor that is incompatible with Adobe InCopy/InDesign CS3. We purchased two types of PC's, some with AMD Atholon II processors and some with Intel Core2 vpro processors. InDesign/Incopy CS3 were going to go on the Intel's (more power computer) and the InCopy was going to only go on the AMD's.
Prior to receiving the CS3 versions of the software, I hadn't been aware that was the version we were being assigned by our corporate office. After looking at the requirements of CS3 on the adobe site, it only mentions Intel Processors as basic requirements.
(We purchasd the computers with AMD's to save some money....the users requiring InCopy didn't need "as much computer" as the InDesign users).
Could the processor be the problem?

Use of field "design documents assigned" in material master

hi,
kindly help me to use the field "design documents assigned" in material master. whenever i creat material master (MM01) in basic data2 view this field comes with grey/black No Link indicator. how to use this and for what .
regards
roshan s.

Hi Roshan,
Insted of using this field u can assign Document directly to the Additional Data tab.
TO attach the document to Material Master go to Additional data ---> Document data, assign Document.
You can confirm it by pressing F1 key by selecting that Field.
Regards,
Dhaval
Edited by: Dhaval Choksi on Jul 10, 2008 3:26 PM

Direct procurement & plan driven procurement

Hello experts,
i have the following basic questions -
1- is the local PO in extended classic scenario contain Purchase org info? how the Purchase Org is determined ?
2- is Direct material procuremnt can only be used in case of Extended classic scenario?
3 - is Local Purchase group is mandatory for plan-driven procurement ? can i assign the entry channel to a Purchase group which is linked to R/3 Purchase grp ?
Thanks in advance

> Hello experts,
>
> i have the following basic questions -
>
> 1- is the local PO in extended classic scenario
> contain Purchase org info? how the Purchase Org is
> determined ?
>
> 2- is Direct material procuremnt can only be used in
> case of Extended classic scenario?
>
> 3 - is Local Purchase group is mandatory for
> plan-driven procurement ? can i assign the entry
> channel to a Purchase group which is linked to R/3
> Purchase grp ?
>
>
> Thanks in advance
Hi,
for 2) direct material works like an ext. classic scenario. However it is not exactly the same since ECS could have accounting assignment where direct material excluded that.
for 3) Local purchasing grp is mandatory for direct material and ECS scenario. Other than that, it is not required. The user can exists anywhere in the org structure as long as a responsible P.Org and Grp have been assigned for that user.
Regards.

Assignment of printers

Hi all
Here I am with one more. We are in SRM4.0
As of now we are able to assign printer at Pur grp level or Pur Org. level. But if we assign the printer in the attribute of buyer directly, the output device is not defaulted in Process purchase orders.
In other words we are not able to see print preview of the purchase orders if we assign printer directly at the attribute of the buyer.
However, we can see the preview of PO if the printer is assigned at Porg level.
Regards
Ashish

Hi,
That is the standard behavior for PO. Printer attribute is taken from P.Group.
You can modify the source code to get from user level.
Regards,
Masa

Making users available for OpenSSO realm group and role assignment?? Help.

Here is the situation. We have 3 Open SSO realms set up. One we have called OpenSSO-Admin, a second called OpenSSO-Provider and a third OpenSSO-Internal. We are having issues provisioning and managing the OpenSSO-Internal OpenSSO-Provider realms, but OpenSSO-Admin seems to be fine.
Here is the behavior that is manifest.
In the 2 'broken' realms, when we create users and assign them to the appropriate Open SSO realm, they appear to be provisioned correctly in IDM as well as the realm (We have validated user creation in LDAP and everything about the user appears to be fine). When we view the groups and roles in the specific resources, we are presented with a list of users that are in Brackets and appear to be provisioned. The brackets indicate that the users are not found as available users. The bracketed users can not be unassigned, nor can any others. note, our bracketed users in the list of assigned users are created from a workflow which assigns them directly to the appropriate group and role based on their business role.
The third realm, OpenSSO-Admin works fine and we can add, and manage users in the groups and roles within the realm.
We have ruled out the workflow as a source as the problem persists when we use the tool to manage users. We can create a user from scratch and add them to the realms. In the 'Broken' relms, the users do not appear in thelist of available users to be assigned to the groups or roles. Yet in the 'good realm, everything appears fine. We can move users from one realm to another and the problem persists in the broken realms, but when a user is added to the 'good' realm, everything is fine.
I have tried reconciling and get no different results.
Question is, We have isolated that the issue seems to be in the generation / management of the left hand "Available Users" list. How and where is this generated from and how can we check/fix or regenerate this list?
Thanks.
Joe

I should clarify. We are using Sun IDM 8.1

Query in Optimal Coding - Assigning INT TAB to FIELD SYMBOLS dynamically.

TABLES: tkesk.
DATA: itkesk type table of tkesk.
DATA: BEGIN of itab_RP occurs 11,
tabname type string,
END of itab_RP.
DATA : wa_rp like line of itab_Rp,
wa_onemore like line of itkesk.
FIELD-SYMBOLS: <fs> LIKE itkesk.
ITAB_RP-tabname = 'ITKESK'.
APPEND ITAB_RP.
LOOP at ITAB_RP into wa_rp.
<i><b>*How to assign the table itkesk to the field symbol
*which is available in wa_rp dynamically instead of assigning it directly)</b></i>
*ASSIGN wa_rp-tabname to <fs>.
ASSIGN itkesk to <fs>.
   LOOP at <fs> into wa_onemore.
   WRITE : 'hi'.
   endloop.
ENDLOOP.

Is this even possible ?
Thanks
Mark

Buttons run in one direction

I've just started to use Flash CS4 after a 3 year hiatus and
I am completely in the dark with AS3. I used to assign AS2 directly
to a button but now I see that it is no longer in the case and I
definitely WANT to learn how to do it the current and right way. I
have a series of buttons that I have set up in a timeline with "on"
and "off" states. When I test the movie, each button works in
descending order but when I try to click a button higher up in the
order, it doesn't work anymore. I tried modifying the code so the
last button ran back to the 1st frame in the timeline, which is NOT
a desired action, but then code resets itself and I can click
through the buttons in one direction again. How do I get this to
work correctly? Do I have to somehow loop the AS? I feel pretty
retarded at this point...please help. Anyway, I used this code:
stop();
home_btn.addEventListener(MouseEvent.CLICK,home);
function home(event:MouseEvent):void
gotoAndStop("home")
work_btn.addEventListener(MouseEvent.CLICK,work);
function work(event:MouseEvent):void
gotoAndStop("work")
news_btn.addEventListener(MouseEvent.CLICK,news);
function news(event:MouseEvent):void
gotoAndStop("news")

From your description, it sounds like your buttons are
stretched across the timeline. I'm guessing that your actionscript
is in the first frame. If all of your button instances are also in
the first frame, then they will work. If you want each button to
work in each frame, then that button instance has to be in each
frame, with no interruptions.
If you want a button to disappear along a particular number
of frames, you can either hide the button behind another object,
or, you can move it off the visible area of the stage and then move
it back when you want it again.

Automation of assignment of ESS & MSS roles

We are implementing ESS and MSS as part of our global HR implementation. What i am thinking of is to look for methods to automate the assignment of ESS role once the HR master record is created for an employee and MSS role once the chief relationship is established for the corresponding org unit.
Does anyone out in the field had done anything similar? If so,could you please share your experiences/lessons learned etc??
Thanks
Sarada Ganti

You have not mentioned the method of role assignment, ie direct/indirect so I assume you are using both.
You can automate the role provisioning without any problems for ess roles directly assigned to the ess user in SU01 - this is because the steps involved are easier to script.
Problems arise when automating the role provisioning for mss users that are indirectly assigned to their mss role through the position. The steps for administering indirect role assignments are not so straight forward and involve the running of RHRPROFL0 which needs to be maintained with key parameters to link the mss role to the position that the new manager is assigned to.
In the end we decided not to use indirect assignments because of this reason. The various scenarios was too difficult to script for the provisioning tool Tivoli (ITIM)
Hope this helps.
Regards
Charmaine

Assign NODIM[] directly on KF

Similar Messages

Maybe you are looking for