Assign one Activity to multiple BPs

Dear SDN team
I wanted to know if one Activity in SAP CRM can be assigned to Multiple BPs ?? As of now only one BP is assigned to each activity.
Is this possible ?
If yes , the can complete the same with minimum configuration or it requires customizations ?
Please help !!
Regards,
Dinesh Rao

Hi Ritvij,
I didnt quite get what you meant by ''As of now' only one BP is assigned to each activity'. i think we can very much assign multiple BPs to an activity in the partner tab of transaction CRMD_BUS2000126.
Let me know if you have any further queries.
Regards,
Amar.

Similar Messages

  • Error while assigning one Postion to multiple employees

    Hi,
    I can assign one Position to multiple employees. as per our requirement if I assign a Position to one employee and hire .. then I will hire another employee and try to assign the same Position which is already 100% assigned, when I try to save IT 0001 the system should through an error messege by saying Position exceeds 100%.
    following configuration has been done to maintain the above scenarioa 
    1.Maintain Relationships--> Relationship Characteristics for B 008 - Error Messege for all
    2. --> Additional data on relationship --> Relationship Persentatge is checked for 008.
    3. Time Constraint Object ID - S to A008 is 3
    4. Time Constraint for Object ID - P to B008 is 3.
    Please suggest if need to do any settings to maintain the above scenario

    ThanQ very much nalla
    Issue is solved..
    Regards
    Priya .M

  • Assign one customer to multiple vehicles in DBM 600

    Dear All,
    I am trying to assign one customer to multiple vehicles in DBM by using VELOB - Execute Actions in Batch.
    I created one varient for customer assignment to vehicles in transcation code VELOV.
    Action - QACU.
    I entered Company code, Plant, Sales Orgnisation,division and customer in varient.
    Run VELOB for action QACU (Assign customer to vehicle) but system gives error "Action Assign Customer (DBM) was not executed for vehicle".
    How can I assign one customer for mulitple vehicle in one attempt?
    Please provide the solution.
    Makarand

    Hi Makarand,
    You'd better develop a simple program and use the function /DBM/VM13_VEHICUST_ASSIGNMENT.  This approach works.
    Tell me if you need the development.
    Good luck.
    Pedro

  • One Activity Number with multiple G/L Account (service procurment)

    Hi Experts,
    We have a problem, we want to create one service activity number (ac03), but we want to use multiple G/L accont . (we want to open one activity number, but we want that it should behave that we have opend several activity number). How can it possible, I know only one G/L can be used for one valuation class and only one valuation class can be maintained in ac03.
    How can I do this.
    Regards
    GR

    Hi,
    For same activity u cannot assign 2 different GL ac, Better U create one more Activity with little difference in Description. & assign the diff val class.
    regds,
    CB

  • How can we assign one attribute set to multiple business partners at a time ?

    How can we assign one attribute set to multiple business partners at a time ? Is it possible ? Can anyone explain me ?

    Hello,
    please refer to the following thread:
    How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?
    best regards,
    Johannes

  • Assign one source field to multiple target fields in FileContentConversio

    Hi All,
    I have a file to proxy scenario. I am using file content conversion to read the text file. My question is can I assign one set of data from the text file to multiple fields in Source Data Type using file content conversion?
    Regards,
    XIer

    these kind of requirements are not possible via the FCC. Handle such things via the mapping after you read the file in the normal FCC way

  • Can I assign one software component to multiple products

    Hi
    Let me know Can I assign one software component to multiple products if so explain me in detail.

    See this
    http://help.sap.com/saphelp_nw04s/helpdata/en/9e/35d022edd4d646a53a56a4da60f9db/content.htm
    <i>4. To view details about a software component, choose the Software Components tab.
    5.From the Software Component dropdown box, select the software component whose details you want to view.
    A table with software component versions appears.
    6.Select the software component version whose details you want to view. Choose one of the following tabs:
    General
    Displays general details about the software component version.
    Products
    <b>Displays the products, which contain the software component version</b>.</i>
    At this location u can see multiple products for one SWC
    Regards,
    Prateek

  • How can we assign one Attribute Set to multiple  Business Partners at a time? Is it possible?

    Hi,
    Can we assign attribute set to multiple business partners at a time, is it possible in Marketing. I got an interview question please tell me if you know the answer. Thank you in advance.sh
    Regards
    Kishor Kumar.

    Hi Kishor ,
    We can assign attribute set to multiple business partner at a time using Report " Assignment of an attribute value to allbusiness partners in a target group".
    This report can be access from  sap guid Marketing->Tools->exter tools.
    Regards,
    Anju

  • Multiple deadlines in one activity - requested end deadline

    Hi,
    I have a requiredment I need to have 2 deadline notifications on one activity.
    if the task is not finished (requested end) in 5 days then an email should be sent to one dept. (one person)
    after 3 days of sending the first escallation email if the task is still not finished yet then there should be another email to different person.
    I have been going thru previous postings but couldnt find relevent one. Can anyone suggest me how to achieve this ?
    Thanks
    Sree.

    Hey Martin & Arghadip,
           This is quite interesting. when the experts have challenges and arguments then the learners have an opertunity to learn more and more. I have seen couple of other forums as well which have the same issue. Everytime time I am starting with some idea but ending with no clue to proceed.
          the thing is I have a wf with requested end and we have to have 2 escallations now. the other one is extra 3 days. I dont need to send the email recursively. only one time sending email.
          From your openions....  Where do I need to have requested start ? Do I need to create another activity/task inside a loop and check for the date ?  I am starting with a loop but that is taking me to create quite a few steps like condition, container operations...etc.
    I would like to finish in few steps. Can anyone please suggest me the procedure ?
    Someone suggested http://www.****************/Tutorials/Workflow/RecursiveMails/Scenario.htm. Can I achieve my problem with this scenario ?
    Thanks for all your time and efforts.
    Regards,
    sree

  • Apple ID for business, one device for multiple users

    My workplace has purchased 3 iPads for staff use on 3 departments, each department has multiple employees each will require use of the device.
    We'd like to avoid one staff member signing in with their personal Apple ID as the device will then be passed to a different team member and therefore to access apps would need the password from the Apple ID user.
    We'd like control over what ID is used, what apps are installed and how the device is used.
    Is there a business option for corporate Apple ID? If not, what is the best solution for this scenario?

    3 iPads for staff use on 3 departments
    It would be a lot of work to do it the official way. Best to read the riot act to the employees.  Assign one person in each department to administer the device.  Set them up with an apple id.  Set activation lock to apple id.
    Now if you want to learn the business way...
    "This document offers guidance on some important considerations for getting the most out of your iOS deployment." Covers: Prepare your infrastructure.  Set up devices.  Configure and manage devices.  Deploy apps and content.  Plan for support.
    https://www.apple.com/ipad/business/docs/iOS_Enterprise_Deployment_Overview_EN_F eb14.pdf
    Quick overview of zero-touch MDM enrollment, DEP
    http://www.apple.com/education/it/dep/
    Consider DEP, Device Enrollment Program. Use VPP, Volume Purchase Program.  Select an MDM, Mobile Device Management.  Read the Google doc below and nsdjoey write up.
        MDM --  Mobile Device Management 
          For a comparison see this page:
          http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
          meraki -- is free.
          maas360 -- has a lot of features
        VPP -- Volume Purchase Program
          http://www.apple.com/education/it/vpp/

  • Replacement of Contact Person for multiple BPs

    How can i replace existing Contact Person who is assigned to multiple BPs in one shot instead of doing it individually. This is to be done in 7.0. Please give me a detailed approach.
    Thanks
    Edited by: Kalees on Sep 23, 2010 8:28 AM

    No, I need to do a mass update, I need to be able to assign one contact person to many customers at one step.
    What about transaction XD99?
    The system is showing me the follwogin message when I try to assign an existing contact person to a new customer:
    Partner xxxx has already been create for customer yyyy.
    Any advice?
    Edited by: BPX PARTNERS on Nov 22, 2010 11:20 AM

  • How can you create an activity as subsequent act. of more than one activity

    Hi.
    I want to create an activity as subsequent activity of more than one activity.
    I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecessor was entered for data transfer.
    However I have customized multiple relationship allowed, and if I do multiples links in transaction crmd_order it works all right.
    Only it doesn't work with FM CRMXIF_ORDER_SAVE. I need create activities with FM because they are interface R/3. What FM can I use to create multiple subsequent activities?
    Thanks and best Regards
    Sorry for my english.

    Hi,
    I have got some activities creates in the system. (e.g. Act. 1, Act. 2, Act. 3 and Act. 4). With the FM CRMXIF_ORDER_SAVE  filled the structure CRMXIF_DOC_FLOW you can create subsequence activity of one of them (e.g. Act. X.1). I need create the same activity (Act X.1)  from another activity, (e.g. Act. 2). I know to do this in transaction CRMD_ORDER by link tab. But I don't know how to do this using FM or BADI or another thing.
    Act. 1     Act. 2      Act. 3     Act. 4 
    .....Act. X.1
    Thanks in advance.
    Edited by: Ana Isabel París on Jul 7, 2008 2:42 PM

  • One TPV for multiple Countries

    Hi Experts,
    Could you pls share experirnce/knowledge around having one TPV for multiple countries together. The scenario is like below:
    1. There are mutiple Countries in Central America which are small islands for whom we need to roll out the Travel and Expense Solution.
    2. The Company code is only one which contains employees from all these Countries.
    Could you tell us how can we do the setup. Should we create one TPV at the company code level. OR should we rather use some other criteria for selecting the TPV maybe at the Personnel area or Personnel Sub Area level.
    Your help is much appreciated.
    Regards,
    Vijay

    Hi Kiron,
    These things I am aware about too. My real question is if I create only one TPV for the company code and assign the Country of the Company code then what issues would this cause. To name a few pls see below.
    1) The domestic Country would always be the Company code Country so would be treated as Domestic Country and show on the Form also as domestic Country even for the employees who are from other Countries.
    2) There are setting which SAP allows differently for Domestic and International like per diem, miles cumulations. So these necessarily have to be kept as same even though local laws are different in all these countries as Domestic is only the Company code Country.
    So I need detailed analysis of what impact I will have by having only one TPV as against making many TPV like one for each Country by using some other parameter like Personnel area/Personnel sub area etc.
    Appreciate your help!
    Regards,
    Vijay

  • For the cm with multiple bps, what are the options for workaround?

    For the cm with multiple bps, what are the options for workaround?
    customer a purchases 1000
    and returns 800 at POS
    customer b was used at SAP related to  this transaction, purchase amounting to 2000,what can we do to apply the returns of customer a to customer b of 800 return transaction at pos?customer a and customer b code pertains to just one client---but were given different codes at POS and at SAP

    Hi,
    If one customer has two codes, you can only do manual journal entry to adjust their accounts.
    Thanks,
    Gordon

  • BADI "COPCMESSAGECONTROL" , only one active implementation ?

    Hi,
    I'd like to do a custom implementation of the BADI "COPCMESSAGECONTROL", eg
    "Z_COPCMESSAGECONTROL".
    For this BADI there's a SAP hint, that only one active implementation is allowed.
    Cause in our system there's already an active SAP implementation "/CWM/MESSAGE_CK" I don't know,
    if I can activate my custom "Z_COPCMESSAGECONTROL" implementation in addition to the SAP implementation.
    Any Ideas ? Many thanks in advance !
    Regards
    Olaf

    If you look at the BADI definition in SE18, you'll find that the 'multiple use' flag is NOT set meaning by default this BADI can only be implemented once.
    Therefore if you need to add custom coding to this BADI implementation either you add it to the implemented methods (modification) or you deactivate the standard BADI and implement your own BADI by copying the standard coding and adding yours to it (also a modification, but you would have your coding in a Z-class).
    However whenever you copy standard SAP code into a custom peogram or class any notes that SAP releases which makes changes to that BADI implementation will not be applied to your Z-copy!
    Hope that helps,
    Michael

Maybe you are looking for