Assign one contact person to all vendors

Hi folks
We will be using surrogate bidding , I want to assign one contact person to all Vendors , and currenctly in SRM you can only assign one contact person to one vendor , is there a way of bypassing this or of assigning contact person to multiple vendors ?

Hi Warona,
The application works as below:
1. While you access the application, the bidder should be selected for whom the surrogate bid is placed.
2. Then a bid can be placed, although multiple sur. bids are placed for the same bidder, th system will just ower write the previuosly created one (One Bid Invitation - One Bid or surrogate bid for a bidder)
3. Then if you want to submit a bid for a different bidder and for the same bid invitation, you have to go back to the application again (bacause only then you ca select the next bidder). Then the same cycles 1- 3 goes on.
Hopes this solves your problem.
Regards
Kathirvel

Similar Messages

  • SUS - Contact person creation for vendor

    All,
    We are at SRM5.0 and using SUS - MM scenario.
    Questions -
    1. How can we assign SU01 user as a contact person for a vendor replicated to SUS?
    2. How can SU01 user id assigned in Org Structure without assigning to any root node?
    Information-
    1. Vendor got replicated from MM to SUS successfully and got created under vendor group.
    2. We cannot use BBPMAININT because standard role SAP_EC_BBP_ADMINISTRATOR is not generated.
    3. SU01 - Vendor user id is already created but not assigned in Org Structure.
    4. Coming back to Q.2 we need to assign this vendor user id in Org Structure without connecting it to any root node. This will generate the BP for user.
    5. Once this is done maybe we can map the vendor BP with user BP via transaction BP or BUP2.
    Request for your inputs.
    Thanks

    Hi Sanjeev and Muthu,
    Thanks for the response!
    However here is the problem as mentioned in my initial post.
    Vendor user id - SU01 is already created which needs to mapped with vendor created in Org Model. Now since the vendor user id is not mapped in Org Model yet, no BP is generated for the same.
    If somehow we can assign the SU01 user id in Org Model then it will create BP for that user and after that we can use BP to link vendor with user.
    We cannot use users_gen at the moment because the vendor id needs to be standalone without assigning to any node. users_gen will ask for the org unit to which this user should be assigned which we want to avoid.
    Create Users transaction cannot be used also since the SU01 id already created.
    Thanks

  • Activate Contact Person Functionallity in Vendor master

    Hi Colleagues,
    We have an issue with Contact Person functionality in Vendor master, specifically with his activation in order to use that funtion menu (Goto -> General Data -> Contact Person). Actually this command is missing in our  system.
    Customizing nodes about contact person (IMG -> Materials Management -> Purchasing -> Vendor Master -> Contact Persons) specify as mandatory requisite set the system as a Retail SAP System.
    We analized the information and executed report GETSYSDEF and the system showed message SYSTEMSWITCH016 "System is set as a manufacturing system"
    Our SAP system is a mySAP ERP 5.0 with component SAP_APPL level 0021.
    We have several doubts related above explanations:
    Is the system able to be customized as a Retail system without loose or damage some actual component (his functionality) as manufacturing system?
    Which is the procedure to follow in order to activate Retail SAP System?
    Is enough to make settings on IMG node "Activation Switch for SAP R/3 Enterprise Extension Set" flagging on application "EA-RET" or in other hand, there are other additional or different steps to make?
    I appreciate any help you can offer me. Thanks in advance.
    Regards,
    Horacio Miranda

    Dear Jurgen,
    First thanks for your response.
    We don´t want to change manufacturing system for retail system, We try to find the way to add retail system to our actual manufacturing system only for get contact person functionality.
    We need to use that functionality on vendors at tx XK01 or tx XK02 / MK02, in order to link all vendor contacts making a validation of each one against a table Z containing prohibited values. If a contact person would exist in that table the system would show an error message.
    I hope to be clearly in my explanation. Thanks again for your help.
    Regards,
    Horacio Miranda

  • Contact person/s for Vendor master

    Is there a way I can add multilple contact persons to the vendor master?
    If yes, plase indicate how this can be done and what config changes are to be done.
    Thanks.

    Hi Sarita,
    Pls can u explain what is ur exact requirement. Do u want to maintain this for particular vendor or do u want to maintain it for all vendors.
    We will assign address in patner function when we are creating a vendor using XK01. Is this feature u want to know???
    Pls try to explain problem in detail sothat we can help effectively.
    Regards
    Ravi Kumar Bolla

  • Creation of Contact Person for a vendor in SUS, MM SUS scenario

    Hi All,
      We are working on EBP for bidding with SRM 5.0 and ECC6.0 as the backend. When we do BBPGETVD for the vendor root we have to create a contact person for the vendor to logon.
    Our clients requirement is that all the data in the R/3 has to come to EBP including the telephone number and email addresses so that the vendor number should be created as the contact persons userid.
    Is there any way to achieve this?
    Best regards,
    Sridhar.

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Create contact person for a Vendor

    Hi experts
    Someone could explaim the processes of contact person creation.
    I replicated the vendor from R/3 and now I need to send a BId to this vendor but the sistem ask for a contact person, so I tried go to transaction Manage business  Partner - Employ to Business Partner and tried to create a contact person for this vendor, but when I try to choose a roles for this user no roles is found and is not possible create the user.
    Where can I insert the roles to found when creating the user?
    Thanks
    Nilson

    Hi,
    Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
    BR,
    Disha.
    Do reward points for  useful answers.

  • Hoe to fetch Contact person for a vendor from BP no of the vendor?

    Hi all,
    Cna anyone tell me any FM  /table where i can find the contact person for a vendor once i pass the vendor business partner no ?

    check function module --> BUPA_CENTRAL_READ_DETAIL , BUPA_CENTRAL_GET_DETAIL
    and give partner number --> as input , once you run the same --> ES_DATA_PERSON , should have the contact person details..
    Edited by: khan voyalpad usman on Nov 1, 2008 12:13 PM

  • Activation of Contact Person Screen in vendor master

    Hello All,
    I need to activate Contact person screen in vendor master so that i can fill the details like name email etc.
    I need to activate this for allvendor  master transactions in ECC 6.
    Thanks in advance for help!
    Regards
    Himanshu

    Hello,
    Thanks for your reply.
    I was going through the same path
    Logistic general>business partner>vendor>define transaction dependent- screen layout
    and i saw the option for supression , required , optional etc for Contact details screen.
    Please let me know the difference in path you have mentioned and i explored.
    Thanks
    Himanshu Nijhawan

  • Multiple contact persons for single vendor--LSMW

    Hi experts,
        i want to upload multiple contact persons for single vendor. using lsmw direct input method or recording method is it possible..if possible can u let me know the procedure.
    Thx in advance,
    Neelu

    Hi
    in our company v wil upload contact person details in Sales Data......
    so its not possible to upload more than one contact person for vendor....
    can u tell me wr u people wil enter the contact person details?
    Regards
    Smitha

  • How can I maintain more than one contact person for a supplier

    Hi
    As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
    How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
    we are in SRM 7, and currently we are creating contact person throug customised BDC.
    please advice.
    Thanks & Regards
    NITIN
    Edited by: nitinkk on Sep 9, 2011 10:22 AM

    Dear Yaniv,
    Thanks for your information,
    I am able to create  users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
    Thanks & Regard
    NITIN

  • How to save more than one Contact Person in CRM

    Hi experts,
                     How to save more than one contact persons in CRM opportunity Application?
    I am using following Function Module...
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_partner        = lt_partner_com
        CHANGING
          ct_input_fields   = lt_input_fields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
    I am giving the input field name as 'PARTNER_FCT', 'PARTNER_NO', 'DISPLAY_TYPE', 'NO_TYPE', 'MAIN_PARTNER' and 'RELATION_PARTNER'.
    The problem is it is saving only one contact person, not more than one.
    Please help me how to save more than one contact persons.

    In SPRO partner processing this needs to be configured.

  • Re-assign a contact person BP from one bidder org BP to another

    Hi forum members,
    We have a situattion where we would like the ability to transfer a bidder contact person BP from one bidder org BP to another by means of an ABAP program.
    This will prevent us having to block the old contact person and create the same one on a new bidder org.
    Has anyone tried this successfully?
    Thanks,
    Nick

    Pradhip:
    I am not sure about that line - but contact persons are replicable with the correct middleware configuration. 
    regards,
    bill.

  • E-mail Issue in More then one Contact Person

    Hello Experts,
    I Have One Customer : C20000
    In this Customer having the five contact person and email for that
    now i have creating sales Order and Click on Email Button in Tool Bar,
    Now i want to automatically all five contact person  in To column and email address of respective column in send message window
    Is it Possible through FMS  ?
    Then How ?
    Please Write the query  for that
    Dixit Patel

    Dear Rahul,
    I know the distribution list,
    but I want when Click on Add Recipient and Click on Distribution List,
    Automatically come to those Customer Code in Find field through FMS
    So I have select that List Name
    Dixit Patel

  • Contact Person info for Vendor #

    Hi all,
    I want to get data of field (KNVK-NAME1) from vendor#. How can I get this. Please response ASAP.
    Thanks in advance.

    Hi,
    Did you check the table WYT3?
    This has link to the Vendor number and Contact person info (based on the partner function).
    Regards,
    Subramanian

  • Error while importing more than one Contact Persons

    Hi experts,
    I am trying to import 2 Contact Persons in the same Business Partner using DI.
    My issue is that only on the second  Contact Person all fields are correct. On the first Contact Person, all fields except the "Name" are blank.
    Has anyone seen that before?
    Thank you in advance,
    Aris

    Hello Aris,
    Could you post your code? I think you don't add a line or set the line correct.
    See this example from the sdk-help:
    Private Sub cmdTest_Click()
       On Error GoTo ErrorHandler
       Dim vCompany As SAPbobsCOM.Company
       'create company object
       Set vCompany = New SAPbobsCOM.Company
       'set paras for connection
       vCompany.CompanyDB = "SBODemo_US"
       vCompany.Password = "manager"
       vCompany.UserName = "manager"
       vCompany.Server = "(local)"
       'connect to database server
       If (0 <> vCompany.Connect()) Then
          MsgBox "Failed to connect"
          Exit Sub
       End If
       Dim nErr As Long
       Dim errMsg As String
       'do it now
       Dim vBP As SAPbobsCOM.BusinessPartners
       Set vBP = vCompany.GetBusinessObject(oBusinessPartners)
       vBP.CardCode = "HU1003"
       vBP.CardName = "ABCD"
       vBP.CardType = cCustomer
       vBP.CommissionGroupCode = 0
       vBP.CommissionPercent = 15
       vBP.Company_Private = cPrivate
       vBP.ContactPerson = "C1"
       vBP.Currency = "$"
       vBP.DiscountPercent = 15
       vBP.VatLiable = vLiable
       vBP.ShippingType = 3
       Call vBP.ContactEmployees.Add
       Call vBP.ContactEmployees.SetCurentLine(0)
       vBP.ContactEmployees.Name = "C1"
       vBP.ContactEmployees.Address = "LN"
       vBP.ContactEmployees.E_Mail = "c1atabcd.com"
       vBP.ContactEmployees.Fax = "8433777778"
       vBP.ContactEmployees.MobilePhone = "8388888"
       vBP.ContactEmployees.Phone1 = "88880000"
       Call vBP.ContactEmployees.SetCurentLine(1)
       vBP.ContactEmployees.Name = "C2"
       vBP.ContactEmployees.Address = "BJ"
       vBP.ContactEmployees.E_Mail = "c2atabcd.com"
       vBP.ContactEmployees.Fax = "84338"
       vBP.ContactEmployees.MobilePhone = "877388888"
       vBP.ContactEmployees.Phone1 = "8888300"
       If (0 <> vBP.Add()) Then
           MsgBox ("Failed to add an business partner")
       Else
           Dim objCode As String
           MsgBox ("Succeeded add a business parnter, new objcode=" + vBP.CardCode)
           vBP.SaveXml ("c:\temp\BP" + vBP.CardCode + ".xml")
       End If
       'Check Error
       Call vCompany.GetLastError(nErr, errMsg)
       If (0 <> nErr) Then
           MsgBox ("Found error:" + Str(nErr) + "," + errMsg)
       End If
       'disconnect the company object, and release resource
       Call vCompany.Disconnect
       Set vCompany = Nothing
       Exit Sub
    ErrorHandler:
       MsgBox ("Exception:" + Err.Description)
    End Sub
    HTH Regards Teun

Maybe you are looking for