Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download.  However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically?  This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

Similar Messages

  • No system found for component and Evaluation system in the Project

    Hi Folks ,
    Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
    No system found for component and Evaluation system in the Project
    Even i have checked with the RFC settings and Logical components are right
    Please do suggest me - This is PRD issue . Try to do the needful .
    Thanks in Advance
    Amrita
    Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

    Hi all,
    I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
    "No system found for component and Evaluation system in the Project"
    But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
    Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
    Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
    Click Copy
    This should replicate to all nodes and then you should be able to assign transaction to the business processes.
    Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
    If not, there is a similar work around which also works.
    Go to transaction SOLAR_PROJECT_ADMIN
    System Landsacpe Tab
    Systems subtab
    Click System Role Assignment
    Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
    Save Project
    Go to SOLAR01 and it should reflect it in the Blueprint.
    You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
    Hope this helps everyone,
    -Rohan

  • How to find out SAP J2EE Patch Level for 04s

    Hi all
    I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
    I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the  PatchLevel  for WAS 7.0 , J2SE used is 1.4.2_09
    Thanks in Advance !!
    Asif

    Thanks Kenny ,
    But as you can see from version.txt  file for Server0 it does not mention PatchLevel it is
    blank
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    i also checked version.txt for dispatcher it is as below
    Specifies the version of the system
    Cluster-Version: 7.00   PatchLevel 
    Build-On:Thursday, March 23, 2006 18:47 GMT
    Perforce-Server:
    Project-Dir:JKernel/645_VAL_REL
    JKernel Change-List:102557
    Build machine:SAPInternal
    Build java version:1.3.1_12-b03 Sun Microsystems Inc.
    SP-Number: 07
    Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
    I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
    servers it is mentioned
    so can u give some inference based on above descriptions about What should be SAP J2EE Patch
    Level for the 2004s servers
    Regards !!
    Asif

  • Unable to read software component versions from System Landscape Directory

    Hi XI,
    Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
    Could you please give me some hints?
    Thanks,
    Bruce

    hi,
    i have also problem with "import software componenet version "
    i got a message like
       "unable to import software component version from
    system landscape directory ......."
    than i gone for SLDCHECK...i got an error it is ............
    calling function LCR_LIST_BUSSINESS_SYSTEM
       Retreiveing data from the sld server function call returned   exception  code 4
      connection to sld does not work
      check sld function and configuration
    what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
    with regards
    Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
    Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

  • ERM -- unable to determine matching org. level for BRGRU in the system

    Hello,
    I have a problem.
    When I trY to import in the ERM (SAP GRC AC 5.3 SP5) a mass import of roles (derived roles) using the template Organizational Template.
    Some of the roles gives me this error:
    "Role not imported; unable to determine matching org. level for BRGRU in the system".
    In the file I put for example
    ZAPVAPINTE     BUKRS     0083
    Am I doing it right? or do I have to put $BURKS?
    Best regards.
    Pablo Mortera.

    I have found that when you run the background job "syncronization of the organizational values" it pulls the org value name and all "values" assigned to it.  If you don't have values specified (on the table level) for the org name, you get this error.  We have many fields that we use values for these fields but they aren't specified in the table.
    For example:  We have the org value "PLVAR" with the values "AL", "01", "02", "03", and "GB" assigned to it.  You can actually see these values in the backend system using SE11.  We do not get this error on this org value.  However, we have another org value "SACHZ" that we use, but we do not have any values assigned to it on the table level, so it is giving us this error.  We are trying to find out how to populate the "values" field since this was not done through configuration.
    Here are the steps:  (1) Go to SE11 in your backend system.  (2)  Put your org value (example:  PLVAR) in the "DATA TYPE" field and click display. (3) Double click on the Domain name.  (4)  Go to the Value Range Tab and click on the "Value Table" name if there is one.  This is the table that has the org values assigned in it - normally done through configuration. (5) go to Utilities --> table contents --> display.  (6) execute the table contents.  These are the values that the sync job pulls over.  If there are no values there or if there is no "values table" name, you get the error.  If there are values there, you don't get it.
    We are working with our technical team to get the values in these fields to see if that works.  Another quick way to see if there are values assigned to the org field is to use "Org Value Mapping" in ERM.  Select the "derived org level field" you want to see and click on the "org value from" magnifying glass.  If no values are there, a "values table" hasn't been populated in SE11. 
    It doesn't make much sense to me though because we can still use values for these fields for our derived roles....we just don't populate the table with them.
    I'll update this message if we find a solution.
    Thanks,
    Peggy

  • SAP_BASIS Latest patch level for release level 058

    Hi,
    I have sap_basis, release level 620 and patch level of 058 in my system.
    What is the latest number of patch level available for the same realease level as mentioned of sap_basis ?
    Where can I go and get the information about the latest patches ?
    Regards,
    Thomas.

    IMHO you should look in <a href="http://service.sap.com">SAP Marketplace</a>
    Greetings,
    Blag.

  • Unable to read software component version from System Landscape Directory "

    I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
    A) Is my understanding on resolution correct?
    Should I go and apply notes 940309 and create client copy of existing client 001
                                        OR
    change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
    I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
    B) Here is what I have done and the error:
    1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
    /people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
    2) When I import the SWC from integration repository getting error
    (Unable to read software component version from System Landscape Directory "server:5<system number>00").
    C) Pointers used from the forum to debug the issue, but still no luck
    Below are the points checked from the forum and all steps are correct, but still have issues with the import
    1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
    2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
    3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
    4) logged using PIAPPLUSER http://server:port/sld and it works
    5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
    Notes: 940309
    You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
    You don't want to use the default client 001, but another client as Integration Server.

    applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
    Note:
    I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
    A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
    http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    1.      Call the wizard-based configuration tool as described in Configuration Wizard.
           2.      Select the scenario PI and the task PIPostInstallProcess.
           3.      Choose Execute.
    A list of the steps to be executed by the wizard is displayed.
           4.      Choose Install.

  • Unable to read software component versions from System Landscape

    Dear all,
    I have an ECC system with ABAP and Java installed.
    I already configured so that SLDCheck, RFC destination configuration run successfully.
    PIAPPLUSER is not locked and can logon.
    However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
    Please tell me how to correct this error.
    Giang

    Hi,
    Check this
    http://****************/Tips/XI/SWComponentError/Resolve.htm
    "Unable to read software component versions from System Landscape Directory
    Unable to read software component versions from System Landscape Directory
    unable to import from SLD
    Regards
    Seshagiri

  • Patch level for SAPGUI 7.10 in ECC 6.0

    Hi all,
    we are upgrading our ECC 6.0 SP 13 to SP18. Actually SAPGUI patch level is 4; is there a matrix compatibility or a link in order to check with patch level for SAPGUI is recomended.
    Thank's in advance.
    Best regards.
    Maurizio Ortolani

    Hi Maurizio Ortolani,
    https://websmp205.sap-ag.de/pam
    Regards
    Ashok Dalai

  • R/3 Patch level  for SAP BW 3.5

    I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
    thanks a lot...

    Hi,
    You would find the info on http://service.sap.com/instguides based on the OS and the database.
    Bye
    Dinesh

  • Recommended Patch Level for ACS 4.2

    Hi,
    Is there a recommended patch level for ACS 4.2? I see a patch 4 and 5 can be downloaded. Any gotchas with either?
    thanks
    Bob

    Bob,
    I haven't had any issues with patch 5 for ACS 4.2. If you have any concerns please see the release notes for the patch.
    HTH,
    Mark

  • Which is the stable patch level for 2005-B after PL 25.

    Which is the stable patch level for 2005-B for SDK Customization purpose.
    Previously PL 25 is stable. As now PL 41 is already in market.
    Anybody knows?
    regards:
    Sandy

    Hi,
    SAP Business One 2005 B (7.40.252)  SP: 00  PL: 38
    I think the above patch was stable after PL.:25
    Raja.S

  • Kernel Patch Level for Linux RHEL 4

    Hi every one,
    Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
    or ls tell me whr can i find it .
    Thanks,
    Praveen

    http://service.sap.com/patches
    --> Entry by Application Group
    --> Additional Components
    --> SAP Kernel
              o SAP KERNEL 32-BIT
              o SAP KERNEL 32-BIT UNICODE
              o SAP KERNEL 64-BIT
              o SAP KERNEL 64-BIT UNICODE
    Choose your platform here.
    SAP KERNEL 4.6D 32-BIT
    SAP KERNEL 4.6D_EXT 32-BIT
    SAP KERNEL 6.40 32-BIT
    SAP KERNEL 7.00 32-BIT
    Choose your release
    Download the independent and the database dependent part.
    Markus

  • What is latest bundle patch level for exadata x3-2 machine? how to find the doc?

    We have a exadata x3-2 machine. I have a question: What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
    Thanks in advance.

    Check note id 888828.1
    This has all the infomation you need.

  • What is HR new Patch level for SAP 4.7

    Hi all,
    What is the HR new Patch level for SAP 4.7 and GUI 6.4.
    Thanks In advance.
    Satish

    Hi Satish,
    The best and the most authorplace to find that information would be the SAP service Marketplace. Go to <a href="https://service.sap.com/ocs-schedules">this link</a> and you should get it.
    Regards,
    Anand Mandalika.

Maybe you are looking for

  • Dunning Letter Print being submitted with wrong language

    We have two German operating units. When we run the Dunning Letter Generate program it will then submit the Dunning Letter Print program. For one of our German OU it submits the letter program correctly using the German language but for the other Ger

  • Using Automator to reply to everyone on an iCal event

    Hi all, I regularly need to email everyone who is invited to a meeting in an iCal event.  The manual way of doing this is: Double-click the event with all the invitees in iCal Click in the invitee field Command + A (select all) Command + C (copy) Cre

  • Is there any way to access a PDF in iCloud on an iOS device?

    After a PDF has been saved in iCloud, is there any way to access it from an iOS device (iPad)?

  • Using Pantones in Text Fields

    I am wondering if there is a way to have the text color of of form fields use a PMS rather than a system color. I have a client that will be making repetitive changes toa document that needs to be in a particular Pantone color. Thanks

  • Deleting pages from a PDF using Acrobat X Pro

    Hello, I need to delete some pages from a PDF.  Within the same document, I can delete some pages with no issue, but can't delete other pages.  Why not?