Assign permissions to iviews attached to a role

Is there any way to assign permissions to an iview that has been attachde to a role.

If an iview is attached to a role, it inherits the permissions from that role. You need not to assign any permission to the iview. If you want, assign the same to the role.
To assign permission, right click on your object > open > permissions
Regards,
Atul

Similar Messages

  • Not able to view the 'proxy-to-remote' iView under 'user admin' role

    Hi All,
    I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
    I am using the portal version EP 7.0.
    Can anybody help me .
    Thanks & Regards,
    Amit Kade

    Hi, Amit
    u have to assign the one iview in User-Admin role
      Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
    and this iview assign to user admin role the u can able to see.
    if its solve please give me 10 points
    thanks & regards
    chitta

  • Fetching iviews not assigned to a page,workset or a role(orphaned iviews)

    Hi All,
    I need to fetch iviews,pages ,worksets ,roles that have not been assigned and are not used.The iview is not assigned to a page,workset ,role,similarly a page need not be assigned to a  page,workset,role and similarly for a workset and a role.
    Any Pointers??
    Thanks in Advance.
    Regards
    Radhika  Kuthiala

    Hi,
    i need to code regarding the same.Can anyone provide me some pointers in regards to available api's to do the same(fetching iviews not assigned to a page,workset or a role(orphaned iviews)).I am able to fetch total iviews in pcd through coding in web dynpro java.
    Regards
    Radhika

  • Setting up permissions on iviews

    Hi All,
    Which role do I need to have to set up permissions on iviews? I need to create 2 roles for the same iviews with read only and full access
    Thnks

    Mike,
    In Portal there are Pre-Configured Roles available for Administrator and End Users:
    Check this for more detailed information:
    [Pre-configured Roles|http://help.sap.com/saphelp_nw70/helpdata/EN/8e/f0f7415e639c39e10000000a155106/frameset.htm]
    (Administration Roles & Every User Roles)
    Regards,
    Karthick Eswaran
    *Reward Points for helpful answers

  • How to assign pages to workset and workset to roles in ep5sp6

    hai,
        how to assign pages to workset and workset to roles
    in ep5sp6 . can any one help me in this regard .
    Regards
    praveen

    Hi Praveen,
       You can find the documentation you are looking for on the SAP help portal.  This link will take you to the Administration Guide for EP5 SP6.
    http://help.sap.com/saphelp_ep50sp6/helpdata/en/38/76bd3b6e74d708e10000000a11402f/frameset.htm
    In the left hand navigation you can pick the topics that you are interested in.  e.g. pages, roles, iviews.
    Hope this helps.
    John

  • Urgent: Assigning Permissions to the P6Reports Folder Error

    Hi,
    I have installed the primavera6 Release 8.3 in windows 2008.
    For configuring BIP in p6,
    some steps available in connecting_bi_publisher_to_P6 documnet.
    As per the document, while assigning permissions to p6reports folder am getting error.
    "oracle.xdo.servlet.security.AdminUser cannot be cast to oracle.xdo.servlet.security.DirectoryUser"
    Please help me to solve this issue.

    Hi,
    The issue has been fixed.
    Solution:
    Log in to the oracle bi publisher with the administrator user
    1> Created a new user and assign the 'BI Publisher Administrator' role.
    2> Logged in as this new user, and perform the same permission action again
    Regards,
    Kumar

  • IView behavior under a role vs. preview

    Hi,
    Anyone knows why my iView is working fine in a preview but later when I see this iView under a role doesn't works? Maybe should I change some parameter of this iView like isolation method?
    Thanks
    Guillermo

    Hi,
    the iView has a component that calls to another using Ajax but the request fails.
    What is the difference between iView behavior under a role and only launched in a preview?
    Thanks in advance
    Guillermo

  • Assigning a different mask for the same role

    Hi All,
      I have two users user1 and user2 are created in MDM and each assigned to the same role say role1.
    My requirement is user1 should get data of catagory 1 where as user2 should get all the main data in MDM.This catagory 1 is part of the main data.
    For this scenario i have created a mask say for example  catagory1_mask for catagory1 data and assigned this mask to the role role1 where user1 and user2 are being assigned to this role.
      And i have one more mask all_mask for user2 where i have assigned all the records of the main table to this mask. So when user2 logs into the MDM he would get all the data in MDM.
    If i assign this all_mask to the role1 user1 cal also access the whole data including user2. But as per the rqmt user1 should not access the whole data but have to access only catgory1 data.
    Can anybody advice me how can i assign a different masks to a one role when 2 users have been assigned the same role?
    Regards
    Sireesha.

    Hi Jitesh,
      I am getting one issue after creating duplicate role in portal.
    As u know i have created 2 duplicate roles for user1 and user2. Before creating the duplicate role i was able to see the user1 and user2 in the SRM MDM UI page of general tab.
       After creating the duplicate roles for these users am not getting the user1 and user2 in the User dropdown field of MDM UI screen...
    Is this bcoz of creating duplicate role?
    How can i get the user1 and user2 here?
    Please advice me...
    Regards
    Sireesha.

  • BDT - Assign a new Tab to a specific Role

    Hi,
    how can i assign a new Tab to a specific Role for example BUP001.
    BR
    TomSd

    I believe normally this is configured by Basis during installation. And in most of the scenarios, it is same as you described. i.e. its asks Package/Transport in R/3 but in BW it stores default in $TMP. Well you can always do this - create object in R/3 - assign package and transport and then later delete object from transport and transport, if you dont want to send that object to further systems.
    Abhijit

  • Is it possible to assign a partner type to a BP role automatically

    Hi all,
    I have over 60 roles to customize (Fields Groupings in SPRO) and i'm trying to group them into a single customizing action.
    All these roles have same attributes but i need to make a geopraphic distinction.
    In field groupings spro it is possible to "Configure Field Attributes per Business Partner Type" but i realize that Partner Type is to be set on master data by user hence my will to assign the partner type automatically to a role or a group of roles when a user creates a partner.
    Is it possible? if no, is there any other way to set field attributes for 1 role instead of 60?
    Well any advice would be welcome.
    Many thanks
    Laurent Monza

    Hi Laurent,
    As standard SAP it is not possible to define default BP type for specific roles. But you can use some Badi or Function Modules to do the same.
    Regards
    Arun Kumar

  • Announcement Iview  suited for a role

    Hi ,
    I would like to have an announcements iview within a custom role.
    I had initially thought of using the announcements available in Collaboration
    rooms , but that cannot be used here because the parameters have to be
    mapped for the room , which does not seem possible here (or can it be used ???? )
    XML forms is a good option, but I would like a simpler way,
    something similar to the announcement section in rooms where user
    can add announcements easily . Could someone suggest a good option.
    Also can room content iviews be used for these roles..
    for eg . links
    Help would be very much appreciated
    Regards
    Vineeth

    Hi Vineeth,
                      If your problem is solved, please post the solution.
    Cheers!!!!!!!
    Umang Mathur

  • How to navigate to an iview with pressing a role button.

    Hi,
    When i login portal, first iview of the first role starts automatically.
    If i press other than first role, it is necessary to pres iview tab to navigate the related iview.
    I want when i press the role tab other than first role, first iview of the pressed role must be loaded automatically.
    How can i do that?
    Thanks.

    Dear CML,
    In the iview that you like open when you click in the menu option, put the iview property "Default Entry for Folder" to yes.
    Regards.

  • Assign permissions by user not workstation on Mac Network

    I know how to assign permissions per workstation, but then the students have the same permissions as the administrator.  I need to be able to assign tighter security for the student login and push it out from the server.

    I know how to assign permissions per workstation, but then the students have the same permissions as the administrator.  I need to be able to assign tighter security for the student login and push it out from the server.

  • How to assign a button for attachment and send the data through browser ?

    Hi friends,
    How to convert to browser ?
    how to assign a button for attachment and send the data through browser ?
    Thanking you.
    Regards
    Subash.

    Refer to
    How to create a text box in ascreen painter?
    where another user (venkateshwar reddy) has asked a very similar question...
    Jonathan

  • Assign permissions to com port

    I am trying to get help or information on assigning permissions for com ports. I am getting communication read errors on software that we use to read meters. The com port is correct in device manager and for the particular software. Communication is good,
    as long as we are logged in as administrator. We have assigned admin rights to the software for the users, but it appears that the com port needs admin priviledges assigned. The software vendor recommended giving admin rights to the user over the entire machine.
    I would only do that as a last resort. Does anyone know how to assign permissions on com ports?

    Hi,
    If you don’t want to grant the administrator privileges for your users, I suggest you distribute the software via Group Policy.
    You may refer to: Permissions and rights have been removed from the Power Users group in Windows Vista
    http://support.microsoft.com/kb/2028493
    Also, if these COM ports are usb based, check the usb devices too.
    As I known, it is not possible to access Advanced screen or Advanced settings without the administrator rights. This issue is more related to hardwre device drivers, you'd better follow the device manufacturer's instructions. I think, you may give admin
    rights to the user over the entire machine as software vendor recommended.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

Maybe you are looking for