Assign purchase organization to more than one co codes??

Hey gurus...
Can somebody tell me to how can we assign same purchase organization to more than one company code?
Ganesh.....

You cannot assign one purchase organization to multiple company codes, but you can assign and use one purchase organization to multiple plants belongs to different company codes.
This cross company code purchase organization is useful for better negotiations at corporate level. You can get header level discounts (applicable on total PO Value) across multiple company codes. If you use cross company code purchase organization, you cannot manually enter company code at header level in the PO. The company code is derived from the plant at GR level.

Similar Messages

Print out of Purchase Orders from more than one Company codes

Hi MM gurus,
I want to print one Purchase Order copy of more than one Company codes. Is it possible in Standard SAP or i need to develop a program for the same.
Please advice me.
Thanks,
Vasco

Hi,
You can talk with your abaper & maintain entries in the Y Z table & at the time of print you can pop up one screen & put your co code. System will check the cocode with the y z table.
Then you will be able to print in different cocode.
Thanx
Reward if useful.

Can we assign cost center to more than one company code.

Hi All,
Can we use same cost center for more than one company code to post the cost ? Or is it company code dependant?
Thanks,
Kumar

Hi Kumar,
Although the cost center is created under a controlling area, we cannot extend to more than once company code in that controlling area. The Co.code field in Cost Center Master data cannot allow you to feed more than one company code.
But you can post some values from a company code other than the company code to which it is extended. In such case, inter company postings will trigger.
Hope this will clarify your issue.
Best Regards
Surya

Can i assign one vendor to more than one company code how?

can i assign one vendor to more than one company code how?

Hi,
If u create vendor in XK01 then there will be three segments which are general data, company code and purchasing organziation data. General Data will be available at client level so that u can use the vendor across company codes just what u need to do is that u have to give the company code data when ever u r creating for a new company code.
regards
srikanth.

Can I install purchased apps on more than one iPad that i own?

Can I install purchased apps on more than one ipad that I own?

Yes, you can install them on more than one device.

Can i assign one customer to more than one company code how?

can i assign one customer to more than one company code how?

Hi
First Create the Customer Centrally in XD01 and then extend the same Customer in FD01 for the required company codes.
Regards
Venkat

Can a personnel area be assigned to more than one company code?

Hi experts,
Can a personnel area be assigned to more than one company code?
Regards,
Anita George

Yes, as Siva said it is not possible.
Between personnel area and company code -
many to one mapping is allowed but one to many is not allowed. That is you can map more than one PA to 1 company code but 1 PA can not be map to more than one company code.

More than one VAT code on one line item?

Hello,
Running ECS SRM 5.0.
Is it absolutely impossible to set more than one VAT code on one order line in a SC or PO?
Can this be acomplished by using a user exit or anything?
This demand comes from a public sector company which pays different VAT dependent on what they use as account assignment. In some orders when split account assignment is used, it might be two different VAT codes on the same line.
rgds
GAR

Hi
Which SRM version are you using ?
As far as i know, this is standard SRM functionality as it not feasible to have multiple VAT codes against one line item.. This is not possible .. Please confirm the same with SAP by creating a Customer OSS message.. Do let me know...
However this is possible by making the code as per your business requirments using BBP_DOC_CHANGE_BADI.. However, since i have not tried this.. You need to try this yourself..
Hope this will answer your query..
Regards
- Atul

Is it possible to have more than one Tax code per line item in Billing docu

Is it possible to have more than one Tax code per line item in Billing document ?

Hi,
I have a different perspective there.
If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
Hope it helps

One Account Statement for customer present in more than one company code.

Hi all,
We have requirement of printing one account statement for customer present in more than one company code.
Program RFKORD10 generates more than one statements for customer present in more than one company code.
Please suggest if any customiztion or program changes need to be done for above issue.
Thanks.

If customer is present in more than one company code then you can config in different co codes.
Now could you brief your requirement, i think you want to print only once and system should print in both company codes at one time. Is it like that?
Regards
Ashu

How to assign a iview to more than one page at a same time

Hi Experts,
I have created 40 pages. I have to assign ivews to these pages. One of the iviews is common to all the pages. Going to each page and assigning the iview to that page will take alot of time. Is there a way in which i can add an iview to more than one page at the same time?
Thanks in advance,
Prisford Pereira.

Hi
You can do that using XML Content and Actions.
You can write XML in specified format and upload it to portal, that will automatically create the content for you in PCD. You can create iviews, pages, assign iviews to pages etc.
More details are available at the how to guide.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47]
Hope this helps.
Best regards,
Ritesh Chopra

Assignment of components to more than one operation in routing.

Hi to all,
I am trying to allocate components of material BoM to more than one operation in routing. I know one way to do it is to define that components again & agin in material BoM & assigned them to operations in routing. Are other ways available to do the same.
Thanks & regards,
Abu Arbab

Dear,
Now I am clear.
You need to create different 2 BOM and with BOM items, as below,
example - total requirement of material A is say 10.
Semi finished Product- X BOM
BOM item 1 - material A-qty 8
BOM item 2 - material B-qty -5
Finished material Y - BOM
BOM item 1 - semifished material X-qty 10
BOM item 2 - material C-qty 10
BOM item 3 - material A-qty 2
BOM item 4 - material D-qty -2
You need to create above 2 BOM's if you want to see semifished product into inventory, if not proceed as below
Finished material Y - BOM
BOM item 1 - material A-qty 8 assign it to routing operation 10
BOM item 2 - material B-qty -5 assign it to routing operation 10
BOM item 2 - material C-qty 10 assign it to routing operation 20
BOM item 3 - material A-qty 2 assign it to routing operation 30
BOM item 4 - material D-qty -2 assign it to routing operation 30
I think this is the only way you can map it.

Assigning ONE PERSONNEL AREA (PA) to more than one Company Code

Can we assign one personnel to more one company code, and if yes, config. step please?
For example:
Can we assign personnel area - AUTO to Company code 1000, 2000 & 3000.

Thanks for your quick answer.
Let me present you a scenario, ok.
We are implementing PA, OM, PY, Recruitment for a company having single client. There are 3 company codes created by FI guys.
Now, we want to go-live with 3 company code at a time. While doing configuration for these sub-modules, we were thinking to have a company configuration that could be used across all company codes.
So we would like to know for example, can we have a common Enterprise, Personnel & org. structures for all the 3 company codes. Can we configure PA and it could be used across 3 company codes, and same things apply to OM, PA & Rec.
Because we want to go-live with company code in 3months?

HT3951 Why is the download of a purchased movie taking more than one hour?

Why is the purchased film taking so long to download on my TV?.

Welcome to the Apple Community RosiePoppy.
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Can purchased apps download to more than one iPad

I am in a school setting. We have purchased several iPads. If using the same Apple ID, can I download previously purchased apps to more than one iPad?

Yes, as long as the apps are still available - just log into the iTunes account on the iPad (Settings > Store) and re-download them : http://support.apple.com/kb/HT2519 . If some of the apps are large then you could download them to a computer and sync them across to the iPads.

Assign purchase organization to more than one co codes??

Similar Messages

Maybe you are looking for