Assign queries to roles

Hi,
I want to be able to assign queries to role. For this purpose I went into PFCG and created two folders. I have assigned the queries to the two folders ( technical names). However they are not showing up in the roles in BEx.
Can someone tell me Step-by-Step how this is to be done.
Any help is deeply appreciated and will be rewarded with points.
Thanks

I am on BW 3.5. We have done the following steps.
1) Created a Role in BW using PFCG.
2) Created two folders under the Menu option
3) Assigned BEx queries to the folders.
I have a question here:
When assigning queries to the folders, what options do I choose. What Technical name do I give.
i think the problem lies there as I am not able to execute the queries from within PFCG.
Please let me know. Any help appreciated and will be rewarded with points.
Thanks

Similar Messages

Need procedure for creation of BW Roles, Assigning Queries,Publishing Roles

Hi Experts,
Could you please let me know the procedure for creation of BW Roles, Assigning Queries,Publishing Roles in Business Explorer (BEx - BW 3.5)
Thanks in advance,
Andy

Hi,
Creating BW Roles
http://help.sap.com/saphelp_nw04/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
Assigning Queries
After creating the query, save the query to a role from the query designer.
Publishing Roles in Business Explorer
https://websmp101.sap-ag.de/~sapdownload/011000358700002894802003E/HowToBIPortal1.pdf
Hope this helps you..!
-Pradnya

ERROR: "You are not assigned to a role" in BEx

Hi,
I have a user BEXUSER. In PFCG, I have assigned this user to a role ZR_USER_ROLE.
However, when I tried to open a query in BEx Anlyzer through Open > Workbooks > Roles toolbar, I could not find any workbooks assigned to this user.
Next, I tried to open a query using Open > Queries toolbar, I chose a query and tried to click Enter in Role icon. However, I am prompted with a message saying "You are not assigned to a role".
How is this possible when I have already assigned this user to a role. I have checked PFCG and confirmed that the particular role contains this user. Can someone explain about this?
Thanks

I am getting this exact same error, and the values that I have set in my query developer's job role are the following :
S_USER_AGR
ACTIVITY = 01, 02, 06, 22
ROLE NAME = {list of roles that the user should be able to save queries to}
S_USER_TCD
TRANSACTION CODE = RRMX
The user still receives the "you are not assigned to a role" error message when pressing the "save to role" button for a workbook.
In the ST01 authorizations trace, I see that the user is FAILING the authorization check for S_USER_AGR, but is failing the check for role names that he / she not supposed to modify.
So those failures are good, but they seem to prevent from saving the workbook to any role ...
How can it be setup so that the user can save workbooks to roles that were inteded to be saved to, without getting the "your are not assigned to a role" error when trying ?

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

ERROR MESSAGE AMT : CANNOT DELETE TOKEN AFTER IT WAS ASSIGNED TO A ROLE

We are working on the setup in our sandbox environment and we have noticed that we are unable to delete tokens and remove the protection on BO's.
the following message appears : "CANNOT DELETE TOKEN AFTER IT WAS ASSIGNED TO A ROLE"
There is no Token assigned to any role anymore and we have also removed all rules and so on, Still it remains impossioble to remove the token on a protected BO or to remove the protection of a BO.
Thanks for your help

Hi Wim,
Ive replied to your support message, requesting a remote connection so I can
investigate further.
Regards,
Gervase

Error while assigning the fallowing role to the user

Hi,
ERROR 2007-01-18 14:13:25
CJS-30196 Role SAP_BC_JSF_COMMUNICATION_RO is not assigned to user SAPJSF
i am getting the fallowing error while trying to assigning the fallowing role to the user any body through some light in to it.
Thanks
kiran.B

Hi,
Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
Step:2: press copy button and change the naming convention.
Step:3: Assign to the user.
I hope it will help you.
kiran kumar.v

Getting dump while assigning resource to role

Hi,
We are using BAPI_BUS2177_STAFFING_ADD to assign resource to role.
It is assigning first resource to first role in first project. And giving dump for next resource to role assignment for the same project.
Short dump description is like as follows:
The exception 'CX_DPR_FATAL_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_DPR_AUTHORIZATION_SERVICES=CP' has to be
terminated.
The problem is of "COMMIT". I ma not understanding where to write exact commit. Even if we are commiting at project level it is giving dump.
Could you please give any suggestion on it.
Thanks & Regards,
Anil Salekar

Hello Kaixiang,
When you add staffing to project then commit after each resource assignment. That will avoid the dump.
Use:
CALL FUNCTION 'BAPI_CPROJECTS_COMMIT_WORK'
TABLES
return = it_return.
Note: Re award if useful
Thanks,
Appasaheb..

Unable to assign all security roles to a user with a new custom security role

Dear All,
Happy New Year.!
I have a query regarding the assignment of Security Roles to new users in CRM. Normally we assign the security roles to new users via an Admin user who has 'System Administrator' security role assigned to him/her. This works perfectly fine, and we can assign
any desired security role to the new user.
However, in our case, we need to delegate the user creation rights to some of the client partners. We do not want to give them access to all the Administration functions; hence we created a new Security Role, lets say 'Support User Role'. We have provided
'Create', 'Append', 'Append To', and 'Assign' rights on 'User' entity for this new security role. With this security role, we are able to create new users now, but we are only able to assign 'Agent' security role, not any other security roles.
For example, if user 'x' has Security Role defined as 'Support User Role'. If 'x' tries to add a new user 'y', then 'x' is only able to assign 'Agent' security role to 'y', but not any other security role. As per business requirement, 'x' should be able
to assign some other security roles, including 'Support User Role', to new user 'y'.
I believe that there is something missing in Security Role configuration, which is causing the above problem. We compared both 'Support User Role' and 'System Administrator' security roles, but not able to figure out which minimum rights we can provide to
'Support User Role' so that users with this security role can only add new users (with any security role), and that they are not having access on any other Administration features as well.
Appreciate any help that you can provide on the above issue.
Thanks in anticipation.

Hi,
Can you check if you have organization level Read access for Securitity Role and Organization level Assign access for Security role.
Refer:-
http://www.magnetismsolutions.com/blog/paulnieuwelaar/2013/04/22/permissions-required-to-manage-roles-in-dynamics-crm-2011
Hope this helps!!!
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question

Publishing Queries to Roles

Hello Gurus,
I would like your take on the practice of publishing BW queries to roles? For an example there are 10 sets of queries and these 10 are published into a role for each company that exists. So in essence if there were 20 company codes we will have 20 roles containing 10 queries hardcoded with a company code. I spoke to our BW developer to get an idea as to why this is being done instead of restricting access through S_RS_COMP. Response was that this was done due to performance reasons (something to do with the queries linking directly to the infoprovider containing the information rather than going through all of the infoproviders). So, Rather than leaving the query open and the user entering the parameter themselves it was decided that the queries were to be hardcoded to cut down the time it takes for systems to display the results.
Anyone experience this issue before? My goal is to setup a derived role where the child roles are restricted by S_RS_AUTH for the company codes and query access through S_RS_COMP instead of being published to a single role. Before I do this I would like to figure out a way to move away from this practice without affect performance for end users.
By the way our users access these queries through the Bex Analyzer.
Thanks,
Wes

Wes,
        Using derived roles in BW or S_RS_AUTH may not be the best design as field for S_RS_AUTH does not appear as org level. So you are not really going to have any advantage by going with derived role concept in terms of maintainence effort.
        With 10 queries - 20 Company Codes - you will not need 20 roles because of Company Code, just update the queries with appropriate authorization variable for company code and restrict users on company code. Just 20 company codes should not cause any performance issues
        Also with hardcoding the queries for each single company code - how are you resolving the scenario when user has access to more than one company code/ or global access.
Regards

Portal: Tab displayed but not assigned to any roles of user

HI Experts,
I have a problem need your great help.
When I logon portal as a specific user, there are 5 tab in home page. When I check the role list, 3 tabs doesn't assigned to any roles this user owned.
Then I try to copy current user into a new user, and logon in . There are only 2 tabs left, which belonged to assigned role.
How those 3 tab assigned into this user? Can we assign iView/Page/Workset directly to user without role?
Any suggestion appreciate. Thanks so much!
Edited by: Jalyn Liang on Nov 13, 2009 9:29 AM
Edited by: Jalyn Liang on Nov 13, 2009 9:30 AM

Jalyn Liang ,
You can find if the user id belong to a particular group with the following ways,
Log in as an admin and go to User Admin -> Users- > Seach -> Enter the user Id and serach for the user -> Select the 5th icon with the tool tip ->Assigned Groups"
or
User Admin -> Group -> Search for the group.
or
You can use UME API to find out whether the is belowng to a group though coding.
Ram

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

Dignostic Error-Failed to assign UME support Roles : Server returned: 503

Hi All,
We are trying to implement diagnostics on one of our EPortal Server. We have already completed all the pre-requisites of diagnostics on EP .
When we try for diagnostics System >Managed System> it gives us following error
User existence check failed : Server returned: 503 Service Unavailable
The following J2EE roles were granted to user SAPSUPPORT : SAP-J2EE-Engine/SAP_JAVA_SUPPORT
Failed to get User ID for user with logonname SAPSUPPORT
!! Exception : Server returned: 503 Service Unavailable
Failed to assign UME support Roles : Server returned: 503 Service Unavailable
Failed to assign UME support Roles for XI : Server returned: 503 Service Unavailable
We have checked UME Page on Eportal , where the error is
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: JMS error.
Please suggest.
Regards,
Swati

Hi,
Please try to re-start the JAVA instance and then try again.
Regards,
Thulasi

Assign some Business roles in the CRm 7.0 i n the UI frame work.

Hi,
I need to assign some Business roles in the CRm 7.0 in the UI frame work.
& how we need to assign the org to the business roles.
Please provide any doc or any link is more appreciable.
Thanks & Regards
Prajith P

Hi,
When in the Org Structure, DOUBLE CLICK on the position so that it opens up the details screen.
From the menu options, Select Goto>>Detail Object>>Enhanced Object Description>>Under the Info Type, Scroll down to business role, select and click on change mode. The business role assigned to that position will be displayed. Here you can assign the required role, save and go back to the org strucutre. Save again. It should be done.
Regards
Varun Taneja

Link between queries and roles

Hello,
Could someone tell me if there is a way to have an overview on the link between roles and queries?
For example a table which give us a role and the liste of queries which are linked to this role.
Thanks in advance.
Hicham

Hi,
I also had same query :
mapping between the query/report and the role with technical names - BI Sec
Its a bit tricky.
Actually there are no direct linkage between queries and roles. However, you can look up S_RS_COMP in the roles that will help you identify which all queries the role gives access to.
Regards,
Zaheer
Edited by: Zaheer on Aug 28, 2008 4:19 PM

Is it possible to assign same partner role more than once in PO?

I am trying to assign same partner role (GS) more than once in a PO, as we have several different suppliers for the different items in the PO. A different option would be tab "confirmations" in PO but I need to be able to check validity of suppliers....
any ideas?

Hi Laurent,
As standard SAP it is not possible to define default BP type for specific roles. But you can use some Badi or Function Modules to do the same.
Regards
Arun Kumar

Assign queries to roles

Similar Messages

Maybe you are looking for