Assign report layout to Interactive report

Is it possible to link a Report Layout to an Interactive query so that downloads to pdf will pick up the new format.

I understand what you are saying.
Leave this first date column as it is but create a third column to the left of the first date column. And put a MIN(promotion date) formula on this. Now your new column will pull a single date for the combination of the 03 GHI. We still need the original promotion date column for our promotion date2 column to work correctly. but we dont have to show it. so adjust the format of this column (white on white) so that its hidden.
Thanks,
Karthik

Similar Messages

MRS (Multi Resource Scheduling) Assignment reporting (POWL)

We are implementing SAP Multiresource Scheduling (9.0 SP1) for one of our clients.We are working with the MRS RM webrequest application to create the MRS requests and we assign candidates and create assignments in the MRS planning board. We create both soft-bookings and hardbookings to support the outsourcing processes.
Now we would like to use the standard MRS reporting tools (POWL) which are available in the WebRequest application. However the assignment report returns no data. (0 records). This is strange because we have a lot of assignments created in the MRS planning board.
According to the documentation I checked and changed the following settings.
Check if the business function was activated (OPS_SME_SIMP_01)
Create a profile ID within the configuration “Define Data Selection for Resource Assignment List” and mark relevant datasets
Assign this profilIe ID to the Planboard profile
Check if planboard profile is determined for the selected organizational unit.
However the report still returns no data.
Looking forward to your valuable input.
Thanks in advance,
Nathan Snoei

hi
this may help you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80d3234b-bb37-2c10-11b3-813b862d0062?QuickLink=index&overridelayout=true
thank you

What do you do for resource assignment reporting / checking ?

I've been tasked with writing a set of reports, the purpose of which is twofold.
Firstly, to help department managers make decisions on new requirements coming in
Secondly, to help resource managers check their resources' assignments against previous months (we move the data date across a large multi programme environment at the end of each calendar month)
Sometimes it can be hard to think outside of the way we work in our organisation, so throwing the question out - what do you and your organisation do?
Points available for the best answers!
David

Another option is to generate SQL reports within the database.
While I have never generated anything advanced we often run basic resource assignment reports to identify where a given resource is assigned:
Generic example:
SELECT a.task_code, a.act_end_date, b.proj_short_name, d.rsrc_short_name
FROM TASK a, project b, taskrsrc c, rsrc d
WHERE c.rsrc_id=2298
AND a.task_id = c.task_id
AND b.proj_id = c.proj_id
AND d.rsrc_id = c.rsrc_id
AND a.proj_id = b.proj_id;

Assigning Screen Layout to Screen Profile

Hi,
I am a RH10 user.
I am trying to generate a help file for a specific screen (resolution).
How do I set up RH to do this, when facing the following "predicaments":
In the Projects Setup pod, I have defined 2 new objects:
Screen Profile
Screen Layout
How do I get RH to assign one to the other?
When I get to the generating stage, I select Multiscreen... or do I...?
What do I do to generate a file for ONLY that specific screen?
TIA,
O. Goren

Hi,
You assign Screen Layouts to Screen Profiles during generation. (In the Single Source layout)
In the Single Source Layout, go to the entry Screen Profiles. You can add and remove Screen Profiles. And you also select a Screen Layout for every profile there.
If you want to generate output for only that specific screen, only add a single Screen Profile in the SSL.
Greet,
Willam

Changing fonts and layout of Interactive Report

Can we change the layout and fonts and colors in an INteractive report?
Can we apply a report template to an interactive report?
Edited by: SaintMahatma on Feb 23, 2009 1:48 PM

I did it like this and it worked.
<html lang="&BROWSER_LANGUAGE." xmlns:htmldb="http://htmldb.oracle.com">
<head>
<title>#TITLE#</title>
<link rel="stylesheet" href="#IMAGE_PREFIX#themes/theme_3/theme_3_1.css" type="text/css" />
#HEAD#
<STYLE type="text/css">
.apexir_WORKSHEET_DATA td *{
background:#ffffff;
border-top:1px #fff solid;
border-bottom:1px #ccc solid;
font-size:11pt;
padding:3px 9px;
empty-cells:show!important;
</STYLE>
</head>
<body #ONLOAD#>#FORM_OPEN#
It's a hard to read the apex_3_1.css because it's all written in one line. So it's a good way to copy the file into an Editor and add additional breaks after each ";"

Change the assigned report on payment medium

Hi gurus,
I'm been asked to modify the assigned traditional payment report from RFFO_A to RFFO_D on a certain payment medium and, eventhough the system doesn't populate any error nor warning message, I'm afraid there could happen some inconsistencies, specially on table PAY* tables.
Do you know of any? And in case so, is there any workaround?
Thanks in advance! Regards,
Rushid Rush
Has somebody ever come across this same doubt and has solved it?
Thanks!!

Hi,
As you are only looking for payment document from BSAK, you may filter BSAK document based on document type.. Usually, the document type for vendor payment is ZP but check in your system which document type is set up for outgoing payment document.
Regards,
Chirag

Assign report category to a report

Hi All,
Please let me know how to assign a report category to a report created in in se38.
Thanks

hi
HI
PLEASE CHECK Defining a new report category UNDER THE LINK
http://www.atomhr.com/know_preview/hr580_cust_sel_sceen_chp1_46.htm
IF IT FINDS USEFUL PLEASE REWARD POINTS
REGARDS
navjot

ASSIGNING REPORTS AND URL LINKS IN ROLE

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva
Message was edited by:
srinivas.korva korva

Hi Nuno,
you can achieve this by changing the XSL file.
Check out this thread for more infos: XML form display in same browser window
Best regards,
Robert

Assign Report Category to a SAP Query for PNP LDB

Hello Folks,
How to Assign a Report Category to a SAP Query which is using LDB PNP.
Regards,
Nishanth Kumar

Hi,
SE38 -> Report name -> attributes -> HR Report category
Regards,
Dilek

Material Assignment report?

Hi
Is there any report available in QM for the Material assigned in an Inspection plan?
I could get the data from MAPL table,but I need it in report.
Please let me know.
Regards
Anbu
Edited by: Anbu C on Aug 26, 2009 11:34 AM

Hi Anbu,
I don't know any better report for the same, but you can drag out the list by this way easily. Follow the steps,
Run Trx QP02/03.
Now press "F4" in the Group field, and open the small window for Restrict Value range for Task list selection.
Here you need to use the restriction option by "Search Using Material"
Here put the filter as per your requirement and convenience.
Press Enter
System will give you the list for Task list Group-Counter Assignment to the Material.
I hope this will meet your purpose.
Regards,
Shyamal

Assign 'Report Links - download' permissions to users.

Hi,
Would like to know, the work around to set user base permission to download option under 'Report Links' in BISE1 Dashboard?
The exact path is :
Dashboard -> Page Options -> Edit dashboard -> Report Properties -> Report Links -> download.
Thanks
sunil

Mayank,
Its very much possible to give the read permission to a folder for a particular user. Here is the procedure.
Login to Portal as an admin user
Goto content admin -> navigate to you folder which you need to set read permission
Right click on the folder -> open -> choose permissions
Search for the user and add
Choose the read option from the drop down menu
Save
Ram

Assign keyboard layout switch hotkey not listed in the keyboard applet

I found some old tutorial to assign left alt+shift to 1st layout and right alt+shift to 2nd layout. How to adapt it to the modern hal way?
Here it is:
create $XKBROOT/mysym :
partial modifier_keys xkb_symbols "shift_ctrl_1" {
key <LFSH> {
type="PC_BREAK",
symbols[Group1]= [ Shift_L, ISO_First_Group ]
key <RTSH> {
type ="PC_BREAK",
symbols[Group1]= [ Shift_R, ISO_Last_Group ]
key <LCTL> { [ Control_L, ISO_First_Group ] };
key <RCTL> { [ Control_R, ISO_Last_Group ] };
add 1 line to $XKBROOT/rules/xorg (after "! option = symbols"):
! option = symbols
myshiftctrl1 = +mysym(shift_ctrl_1)
add option to xorg.conf :
! option = symbols
Section "InputDevice"
Option "XkbOptions" "myshiftctrl1"
EndSection

Found a temporary solution. Unfortunately It resets other options set in the corresponding gnome applet;
Instead of alt+shift it sets shift+alt to change layout. I tried to swap the key names in 'mysym' file, but it has no effect.
#!/bin/sh
xkbdir="`mktemp -d`" || exit $?
mkdir "$xkbdir/symbols"
cat>"$xkbdir/symbols/mysym" <<EOF
partial modifier_keys xkb_symbols "alt_shift_1" {
key <LALT> {
type="PC_BREAK",
symbols[Group1]= [ Alt_L, ISO_First_Group ]
key <RALT> {
type ="PC_BREAK",
symbols[Group1]= [ Alt_R, ISO_Last_Group ]
key <LFSH> { [ Shift_L, ISO_First_Group ] };
key <RTSH> { [ Shift_R, ISO_Last_Group ] };
EOF
setxkbmap -symbols "pc+us+ru:2+inet(evdev)+mysym(alt_shift_1)" -print | xkbcomp -w0 -I -I"$xkbdir" -I/usr/share/X11/xkb - $DISPLAY && rm -rf "$xkbdir"

Auto layout with interactives - please help

Hi,
I have many Word documents with a 100 pages each. The word documents contains the text for the manual only, and now I'm converting it to PDF file.
How can I set a on the header and the footer of the documents (of all pages) buttons and links that will work after I add them.
I tried creating the buttons layout in a separate PDF, and append it as background. When I append it, it looks excellent, but the interactive (links and buttons) are not working.
I have no deep experience with Acrobat, and I need assistance for a noobe.
If a background page eliminates the links, is there a way to append it in another way (I don't want to do it manually 500 times)?
The header and footer feature allows me to place only simple text, and I need to place a graphic block with interactive.
I am using Acrobat X Pro.
Danielle

You'll need to use the Button tool located under the Content panel in Acrobat X to do this. Once you've created your button, then you can use the context-sensitive menu to duplicate it across all your pages.

Assigning Keyboard layouts to Keyboard Shortcuts

is this possible?
I notice in the button list, there are buttons for "Keyboard layout 1-5"
How are those used?
I would like to assign my standard layout & multi-cam layout to F keys so I can switch between them quickly.
thanx
--sbf

Hi Bryan
Perhaps this reference will help?
Saving and Loading Keyboard Layouts:
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=10%2 6section=13
Saving and Using Custom Button Bar Layouts:
http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=10%2 6section=20

Assign Keyboard Layout to Application

Hi all,
Is there a way to assign a specific keyboard layout to just one application so that only this one uses it and all others still use the default layout?
Thank you very much for any idea!

In KDE I could set the keyboard layout to be application-specific. Is it possible to do the same with Leopard?
No, but see if this helps:
http://limechat.net/inputswitcher/

Assign report layout to Interactive report

Similar Messages

Maybe you are looking for