Assign same Section Code to two Business Place

Hi
We have a scenario, where in there are two Plants in the same state and the same legal entity and one TAN Number. we would need a single Section Code for the TAN Number. However, for evey plant there should be only one Business Place. Can we assign the same section code to two Business Places. What would be the effect on the returns?
Regards
Sanil Bhandari

HI Sanil
What i understood that you have created two business place and some are coming under one section code,actually this is normal scenario there will not be any effect on return as well as certificate printing also coz you have to run the return program on section code basis not on the business places.
Hope it will help you.
Regards
Dipak

Similar Messages

Can we maintain Same No. Ranges for Different Business Places & Section co

Hi All,
In Extended Withholding Tax for Remittance Challans we create number ranges,our cleint having five business places. We maintained the number range for only one Business place. I want to know whether can we copy the same number ranges to remaining Business places or we has to create new number ranges for the remaining Business Places.
Regards,
R.K

Hi AnjiReddy/Chetan,
In EWHT-> India-> Remittence Challan-> Maintain Number Groups, I copied one Business Place-xxxx, and while i am executing T.Code:J1INMIS, the system throwing an error "Number group not maintained for CO Code:YYYY, Section:xxxx, Business Place:194C".
Regards,
R.K

Business place / Section Code v/s Business Area

Dear Experts,
we have three Business Areas : Mumbai, Nasik & Pune.
We have centralized TDS in Mumbai, Centralized Excise in Nasik, Decentralized VAT State wise (At present , only Maharashtra).
Please let us know how Business Place is to be used so that Reports on Taxation can be taken out correctly.
please help.

Hi,
Business place/Section Code is primarily used in deriving tax reports.
In India, the section code tells the system under which TAN the item was posted, and thus which TAN has to declare it in its tax statement.
As per your requirement, you can create just one Business Place as of now as you say TDS is centralized. If later you want to add you can definetely add.
Caio
Raghu

Same error code for two different errors

I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
Message Edited by for(imstuck) on 01-27-2010 03:47 PM
CLA, LabVIEW Versions 2010-2013

Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How can we use same material code for two different sales area

Hello friendsu2026
Hope you all doing well
I am facing a problem and I will be thankful to all of you, for your suggestions
Issue:
I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we have created a new sales are 3000/13/20 for export,we cannot create the salesa are as 3000/13/19 due to some company issues,
Is there any way how I can use the material already in 3000/10/19 into new sales area 3000/13/20.
Will common distribution channel and division concept will be applicable here
As the material is same,and we donu2019t want to go for any more new material code. *
Thanks
Siddharth Sharma

Hi Sharma,
when a material is used in domestic and exports.....i hope it should be seggreagated based on dist chnl.......but not division.
because material is Division specific. it can be there in only one division. like mother child relation.
that is the reason why...... it is maintained inside BASIC DATA...... but not in input screen while creating material master.[unlike dist chnl]
because a material can be in multiple dist chnl....but not multiple division.
I feel only alternative is creating new material if you are already decided to devide the sales by division for domestic and foriegn.
Purpose of common dist chnl/div is to maintain pricing/condition in one common whenever you change master data.......
hope this gives you the clarity
regards
Satya.SCM

Substitution rule for Business place and section code

Hello Friends,
We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
Thanks
SK

hi SK,
i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
i created one validation that if my business area is 1000. then substitute the business place field with section code.
we have business place individual business area wise so i created this substitution.
Regards,
Sankar

Business place section code error

Hi,
While f-43 for posting key 39 it shows the business place section code cant be blank and both should be equal.
Can anyone guide me in this.

May be you have define section codes based on the Business place.
Section codes represents different business places.
e.g. Head office section code -001
Branch office section code - 002
based on the business transaction and business place you to enter section code.
section codes are useful for tax purpose.
Rgds
Swapna

Miro not posted, error "Please Enter the Section Code Business Place"

Hi all,
When I tried to post a document in MIRO, I am getting the following error "Please Enter the Section Code Business Place" only for the one particular document.
However Business place or Segments are not configured. Even purchase documents are getting posted in MIRO, except the above one. If any one have any suggestions let me know...
Thanks & Regards,
Balaji
9080444242

Hello,
Business Place & Section code are required to be mentioned in MIRO document for TDS purpose. It could be either determined automatically through substitution rule or the field could be made mandatory through validation.
Business Place is created for TAN registration that your company has, Section Code is created in line with the bUsiness Place.
Section Code derives the Business Place.
Hence its compulsory to mention Sec. Code & Business Place while posting the transactions for TDS.
Regards,
jaymin r. bhatt

Number group nt maintained for CC 1000 section 1200 and Business Place

Dear All
Experts.
Hi,
We are facing an error while performing J1INCHLN. At the time of posting outgoing payemnt
through F-07 we are getting following error.
" Number group not maintained for CO code 1000 section code 1200 and Business Place 194C."
However we have maintained the the section code and number range for respective section
codes i.e. 1200 & 1300 as number range group 02.
Still facing the same problem.
Please help on this.
Regards,
Sharvari Joshi.

Dear,
Sometimes number range groups have been maintained but not the proper tables. Check table J_1IEWTNUMGR_1 in SE16 if number range gorups have been maintained, if not then maintain this table using SM30 or SE16.
Regards,
Chintan Joshi

Dummy business place

hi experts,
I`m looking for inputs on use of dummy business place with respect to WHT (TDS & TCS) configuration for India. Under the current scenario, we have multiple business place and one section code to be setup. But I need inputs on whether we need to assign this one section code to all business places or create a dummy business place (with same name as section code) and assign thisu under the WHT configuration and use this dummy BP and real section code in WHT postings.
Hoping to get some inputs on this!
Thanks
SGP

Dear Paneer,
As per SAP note 818732
a) Availability of two function modules namely - J_1I_VAT_TAX_ACCOUNT_DETRMINE and J_1I_VAT_TAX_ACCOUNT_DET_SD. These function modules are part of the function group J1I4 and belong to the Development Class J1I2.
b) Program changes that call these function modules in the relevant programs.
c) A new table - J_1IT030K and its view to maintain the alternate G/L account on the basis of the Business Place, Tax code, Account key.
I am maintianing GL 's in mentioned table
Rgds
ManiSuma

Section Code field in MIRO screen

Hi,
Do you know how to enter the section code in the MIRO screen please? I cannot see the field section code and/or business place in the screen. However, the Business place is populated in FI document from plant --> business place assignment. Whereas the section code that is required for a vendor invoice subject to withholding tax is not populated. And I cannot see the field either. Please could you help?
I have activated a substitution to get this populated now. However, I would appreciate if you coudl help me get the field appearing on the MIRO screen. SHD0 is something that I tried to do. But, couldn't not get this field.
Please help!

hi,
Thanks for quick response. However the OSS note 605046 asks us to define the section code for India in the table J_1I_SECCODE. That is what we did. Our patch level is 5 in ECC 5.00. Since we have around 40 Company codes that are already live and running, applying a patch at this time will be a disaster. Therefore, I am not sure, whether we have any other option or not. I will change the substitution rule I set up for automatic population of section code, complete the configuration you mentioned and try my luck again. If it works, then we will be fine. Otherwise, I will update you with what SAP come back with. I have raised one OSS message as well. Let's see their response too. I will update you with the result of testing after I complete the configuration changes that you mentioned.
I will hold on to this message until then.
Thank you,
Subash Krishna

Business place and section code substitution

Hi,
We have defined each product line as division and this is defined SAP as business area.
example
Business area
1010 - A Karnataka ,
1020 - A Delhi,
1030 - A Chennai
1040 - B Karnataka
1050 - B Delhi
1060 - B Chennai
Also defined Business Place and section codes as (both are same)
KA01 - Karnataka
DE01 - Delhi
CH01 - Chennai
So we have multiple business place.
Can I substitute business place/section code based on the business area.
example for Co code XXXX, and accont type = K, and business area = 1010, then substitute business place / section code as KA01 and so.
I have heard that we can subsitute only when there is a single bus. place to be defaulted... let me know if we can do it with the multiple business place as well.
i guess we can maintain a custom table having business area and business place/section code... and default the relvant business place/ section code based on business area through an EXIT.
pls advice
rgds, GS

Hi Takashi-san,
I would like to ask for your reference in regards to the issue I got from my current project.
I activate the business place function for country Vietnam
Then, create 2 business places (XX01 and XX02).
Then, do the mapping for sales office and plant
XX02 = XXP2 (sales office - we define 1 sales office only)
XX02 = XXF2 (plant - we define 1 plant only)
Then, for sales/billing posting, the business place XX02 is updated accordingly following the sales office
But at the MIRO transaction, the business place XX02 doesn't populate/derive from the mapping table above.
I was trying to use the substitution function to update with below information but unluckily that BUPLA(Business Place) filed is not substituted
Substitution: Local susbtitution for business place
Prerequisites:
If BKPF-BLART = 'RE' AND BSEG-HKONT = 'XXXXXXXXXX' AND BSEG-BUPLA = ' '
THEN FILL BSEG-BUPLA = 'XX02' AT LINE ITEM WHERE BSEG-HKONT = 'XXXXXXXXXX'
Can it be possible to use the user exit here?
Thanks,
Hai

Auto Assignment of Business Place in Sales Orders

Dear Experts,
So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically.
But I have sales which is free of tax. Please advise how to assign business place automatically for these tax free sales.
Thanks,
Deb

Hi,
Is there any requirement for which you need business place for non taxable sales. You can try substitution using tax code and deriving the business place.
Regards
Milind Sonalkar

Can we give same Excise Group to two diff. Plant within same company code

Hi,
Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
Regards,

Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
Regards,
Sachendra Singh

Section Code in FB60

Dear All,
we defined one section code for the cocd. the same section code we are using for all the bussiness places ( 4 no's).
when i post a document with one business place with the section code it accepted the posting and remittence challan, bank challan and certificate.
when i post a document with other business place with the same section code it is giving a system message that pl. check the section code.
No where we have given the assignment between the section code and business place.
Our motoo is to generate the tds certificates at one section code level for different business places.
Thanks for giving a valuable suggestions.
Regards,
Narayan.

Hi Narayan,
You can assinge section code to business place.
Go to FA>****>WT>EWT>Basic setting->South korea
Regards,
Ravindra

Assign same Section Code to two Business Place

Similar Messages

Maybe you are looking for