Assign specifications with custom-built program

Hi,
I want to use a custom-built program to assign specifications and calculate the sample size for an inspection lot. I don't want to do this automatically at inspection lot creation.
Does anyone have a code on how to do this? I don't think it's enough if I change the status of the inspection lot?
Jessica

Never mind, we found a different solution.

Similar Messages

Inbound ECC, ADRMAS/DEBMAS Processing with Customer # Assignment

I am looking for someone with recommendations on how we can get ADRMAS and DEBMAS IDocs transformed with new customer number and processed in proper order in ECC. The IDocs are being sent from a hub MDG system with a hub customer number in them. They get sent over via ALE to the destination ECC system and we have them set to not process immediate. We plan to process them via a program that needs to look up the next available customer number on the ECC (using internal number assignment) and process both IDocs with the new ECC customer number.
We need to coordinate the ADRMAS processing before its' respective DEBMAS.
Any suggestions are appreciated.
Thank you,
Keith

Hi Keith,
You might want to consider using "Serialization by Message Type" in the receiving system.
Please refer to below link which has more information :
Serialization of Messages - ABAP Development - SCN Wiki
Also, if you have internal number assignment for the customer, the system will propose a new available customer number.
Thanks,
Kumaran

Custom concurrent program failing with Signal 6 error

Custom concurrent program failing with the below error ,
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
# An unexpected error has been detected by HotSpot Virtual
Machine:
# SIGSEGV (0xb) at pc=0xf608fd7e, pid=16054, tid=3417308016
# Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
# Problematic frame:
# C [libca.so.0+0x2dd7e] caupzsearch+0x1e
Help needed to debug this error.
Regards,

Please post details of application release, database version and OS.
Is the issue with one specific custom concurrent program? What is the type of this CP? Has this ever worked?
Please enable trace/debug as per (How To Trace a Concurrent Request And Generate TKPROF File (Doc ID 453527.1)) and see if more details are collected in the log then.
Thanks,
Hussein

Which IM programs work with my built in camera?

Basically just looking for which im programs will work with the built in cam on my macbook, i know of course that apples ichat works but i dont have a .mac account and dont intend on one at the moment.
Also if anyone knows, my wife and I share the macbook at home, we have separate user accounts, how would we be able to share our photos across users, ie, we want iphoto to include the photos ether of us add as accessable by the other using iphotos and have them in the iphoto library, infact would would simply like to just have one photos and one videos and one music folder from which we both access and add to.

Greetings,
A dedicated shared folder setup under the main "Users" folder that holds all user accounts with access permissions assigned for both of you will work very well. There is a small little app called "iPhoto Buddy" that is a great little tool that's made for managing multiple iPhoto libraries.
SightSpeed is a very good IM video program for video chat/conferencing - I have used it since it came out and it is cross platform. You can use about any email address as a user name, and the quality is very good - it has many functions, but is very simple to use.
Good Stuff - Cheers.

How to create an install medium of Windows 8 with custom programs (like an OEM install)

Hello all,
I am interested in setting up a small business of making PCs for people around my area, and was curious if there was any way I could install Windows 8.1 on those computers with custom programs (i.e. Browsers, Anti-virus, etc.), but not have to create a user
account to do so? I want people to get these computers and go through the regular setup account process when they turn them on for the first time, just like with any computer from a regular OEM. Basically, I am trying to create my own OEM instillations of
Windows.
Thanks for any help, and let me know if I need to clarify anything.
Graham

Hi,
Andreas is right, we have many ways to deploy Windows 8.1 like OEM.
You can also try the ADK:
Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1
http://www.microsoft.com/en-hk/download/details.aspx?id=39982
The Windows ADK enables two key scenarios: Windows deployment and Windows assessment.
Windows Deployment is for OEMs and IT professionals who customize and automate the large-scale installation of Windows on a factory floor or across an organization.
Kate Li
TechNet Community Support

Need func/tech specification with report program

hi experts
i am a fresher.please help me.i am waiting for ur reply
can anyone send sample funftional and technical specification with report program for SD and MM modules.
in any format
please send now to this my mail id
my mail id is: [email protected] (or)
[email protected]
thanks in advance.

please send any one now
i need very urgent
dont avoid pls
i am waiting

How to find custom Tcodes,programs and enhancement.. for a specific country

hi...
Is there any way in ABAP to find the Custom Tcodes, programs and enhancements only for specific country in our present system.

Hi Srujan,
Use the table name TSTC to find the custom program and t-code.
To find the custom enhancement use t-code : CMOD.
Regards
Dev

Integration of Check Register with Classic Payment Programs

Hello,
I know you can integrate the check register with electronic payments via the payment medium workbench. Is there any way to achieve the same integration using classic payment media programs like RFFOUS_T? Thanks!

In creating a new format with custom code would I have the developer create the required function modules and assign them in the event modules for payment meduim formats? I guess I am just missing where the custom code integrates with the format.
I agree the DME is great. I have used it in the past to create various payment formats. I tried originally to create the required file format in the DMEE but failed because I could not get the tree to repeat at the correct levels. The format I am working with is the Citibank Paylink file format for Argentina. It effectively is a three level file
1. Payment Record
2. Invoice Records - with sublevels
3. Legal Invoice Document Records (specific for Argentina)
The problem I face is that level 2 has dynamic sublevels of data that has to repeat for certain data in the same document. It may be possible but it is currently above my skill level with the DMEE.

Customer discount when netting vendor payment with customer receivable

Hi Guru,
We built the netting process in which we net the vendor payment with customer receivable. There is a problem. The payment program takes the discount off from the receivable even after the term discount period. e.g. we have a receivable from the customer with a 1% discount with one month term which expires on July 31. I do a payment run with a posting date of Aug 26. The payment program still gives the 1% discount to the receivable thereby reducing the amount of receivable and increasing the amount of our net payment.
Is this a glitch? OR have I missed any configuration??
Thanks
Linda

Hi
while running the APP for a vendor, the system will suggest all open items due from vendor account and customer account.
This can be changed at the time of APP.
Assign points if helpful,
Regards
Sunil

AP payment custom build program

I have a requirement to create an AP payment file format specific to a Bank (Oracle 11i). The bank accepts payment file in 2 different formats.
Format X: to make payment in its own country (Netherlands). i.e. payment for invoices where supplier bank is in Netherlands.
Format Y: to make payment in all other counties (except Netherlands).
Standard Oracle Payment SELECT/BUILD program selects Invoices for all countries (for the param given: pay batch, currency..)
If I create two payment FORMAT programs; one to pick up the Invoices for payment in Netherlands and another to pickup invoices for payment in all other counties; will it be fine ?
OR
I have to create a custom BUILD program to build a payment batch considering counties of supplier (and payment FORMAT program to create the flat file)
Help Appreciated !!
Thanks
SM
Edited by: user13294561 on 27-Sep-2010 00:22

Define 2 concurrent program to format batch records and create payment file
(or a single program with technical handling of batch type)
Define 2 automatic payment format program
Sample
NL Foreign Payments Program
NL Domestic Payments Program
Define 2 electronic payment formats,
Sample
NL Foreign Payments
NL Domestic Payments
Select each of your payment format program in this setup
Go to Internal Bank Account Setup
Payables Document
Create 2 payables document
EFT DOMESTIC,
EFT FOREIGN
Payment Format,
Select the format programs
Create Batch
Hope this helps
Bilal SARIOZ

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

HTTP 500 Internel server error in Custom tag program on Weblogic 8.1

Dear sir,
Please attend my problem...
I face the Error 500 Internel server error when I rum the custom tag program on weblogic 8.1.
My program Structure is:
Program>Home.jsp
>WEB-INF>classes>mypack>MyTag.java, MyTag.class
>tlds>taglib.tld
>web.xml
Home.jsp:
<%@ taglib uri="/WEB-INF/tlds/taglib" prefix="Kumar" %>
<Kumar:hello name="Vijay">
It is a Tag Body 
</neeraj:hello>
taglib.tld:
<taglib>
<tlib-version>1.0</tlib-version>
<jsp-version>1.2</jsp-version>
<uri>/WEB-INF/tlds/taglib</uri>
<tag>
<name>hello</name>
<tag-class>mypack.MyTag</tag-class>
<attribute>
<name>name</name>
<required>true</required>
</attribute>
</tag>
</taglib>
MyTag.java:
package mypack;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
public class MyTag extends TagSupport
String name;
public void setName(String c)
name=c;
public int doStartTag()
return EVAL_BODY_INCLUDE;
public int doEndTag()
try
JspWriter out=pageContext.getOut();
out.print("Good Night "+name);
catch(Exception e)
return EVAL_PAGE;
web.xml:
<web-app>
<welcome-file-list>
<welcome-file>/Home.jsp</welcome-file>
</welcome-file-list>
<taglib>
<taglib-uri>/WEB-INF/tlds/taglib</taglib-uri>
<taglib-location>/WEB-INF/tlds/taglib.tld</taglib-location>
</taglib>
</web-app>
Allthough this program are run on NetBean6.1.In NetBean6.1, i am not specify the web.xml file.Please Help me..

With an [HTTP status code|http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html] of 500, the most helpful information for debugging the problem is usually in the server's log file. There should be a stack trace in the web or application server's log file that will contain the specific root cause of this. It is often a NullPointerException or ClassNotFoundException or other "common" exception.

FBL1N error - vendor balance with customer item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi Dhananjay,
Pls show the error/ dump to the ABAPer
Regards,
Kiran

Clear by assignment field and customer

Hello,
I am facing the following situation:
I am working on an interface SAP-Payment service provider. This provider is sending me a total amount (sum of several invoices)in order to recognize every invoice separately, I asked to inform in the assignment field the customer id when sending the payment to SAP. Once this payment is posted in SAP I am using transaction code FB05 for the clearing with the corresponding invoices. The situation is that my invoices (which should clear with the payment) have in the assignment field another value, different to customer id.
I was thinking about adding a new rule at spro (Automatic clearing)in order to clear by customer idu2026and assignment field of my payment. But still donu2019t know if it is going to work or how to built this condition.
Can you give me a helping hand?
Thanks you so much
Regards

Hello,
I already have for g/l account sort key 003 (document date). And I cant change it....Any suggestion?
Regards and thanks!

How to put display-only condition in a custom include program

hello everyone,
I have to make a custom include program that will be used instead of the already available 'bdcrecx1'.
I have a couple of questions and would appreciate your help.
I need to create a parameter with a checkbox. When this checkbox is 'X' the following 2 fields need to be greyed out, otherwise user should be able to enter values in them. How can I grey out the fields?
Using my include I should have just the following:
1)parameter with checkbox
(if 'X', session and user greyed out)
2)Session Name
3)User Name
Also, is there a way I can avoid putting the following onto the screen:
1)Keep session (this will always be defaulted to 'X'
2)No Data
Note: I made a copy of 'bdcrecx1'and i'm doing changes according to my requirement.
Thanks in advance.
Regards,
Fred.

Hi,
For your first question.
use
assign user command for checkbox say 'CLICK'..
at selection-screen output.
loop at screen.
if screen-group3 = 'VALUE' and checkbox condition.
screen-active = 0.
else
screen-active = 1.
endloop.
To make sure that the user enters the data in fields if checkbox is not grayed,
do it in event
start-of selection.
if field is initial.
exit.
go back to previous screen.
endif.
for removing 'keep session' , check out for exits..
Regards,
Tanveer.
Please mark helpful answers
Sorry about the previous error in reply.
Message was edited by: Tanveer Shaikh

Assign specifications with custom-built program

Similar Messages

Maybe you are looking for