ASSIGN  TO betrag could not be performed (system error)

Hi Gurus,
Can anybody let me know when we will get the above said Subject error.
I had encountered it in MIGO GR transaction.
Iam pasting the total text of the error below
ASSIGN  TO <betrag> could not be performed (system error)
    Message no. M7103
Diagnosis
    A system error has occurred during internal processing by the program.
Procedure
    Contact your system administrator.
Regards
Mohan

Hi ,
Sit with Abaper and process MIGO in foreground it seems something related to program which runs in background during material document generation.
Thanks
Suresh

Similar Messages

  • 'ASSIGN EDVB0 TO betrag could not be performed (system error)'

    'ASSIGN EDVB0 TO <betrag> could not be performed (system error)'  while MIGO...

    Hi ,
    Sit with Abaper and process MIGO in foreground it seems something related to program which runs in background during material document generation.
    Thanks
    Suresh

  • TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

    Hi All,
    We have snapshot replication . Job is failing in between due to below error.
    Error messages:
    The process could not connect to Subscriber 'XX:SD'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084)
    Get help: http://help/MSSQL_REPL20084
    TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. (Source: MSSQLServer, Error number: 10055)
    Get help: http://help/10055
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. (Source: MSSQLServer, Error number: 10055)
    Get help: http://help/10055
    Login timeout expired (Source: MSSQLServer, Error number: HYT00)
    Get help: http://help/HYT00
    Please suggest

    Hi Khushi，
    According to your description, your snapshot replication job fails and you come across the error related to TCP Provider. Based on my research, the issue could occur as the following two situations.
    1. OS runs out of memory for TCP buffers. When people use the two switch: the /PAE switch in the c:\boot.ini file and the /3gb switch in the boot.ini file. If the applications require many OS resources, such as by opening many TCP connections, this can cause
    the OS to run out of memory for resources like TCP buffers.
    2.OS runs out of available TCP “ephemeral” ports. When the client machine is opening many TCP connections and is running Windows Server 2003, Windows XP, or any earlier version of Windows, it may run out of TCP “ephemeral” ports.
    To work around the issue, please follow the two solutions as below.
    1.Remove the /3gb switch from c:\boot.ini. The root problem in this case is memory pressure on the OS, so removing the /3gb switch will give more memory to the OS and will alleviate this problem.
    2.Make more ephemeral ports available following the steps in the article:
    http://support.microsoft.com/kb/196271
    For more information about the process, please refer to the article:
    http://blogs.msdn.com/b/sql_protocols/archive/2009/03/09/understanding-the-error-an-operation-on-a-socket-could-not-be-performed-because-the-system-lacked-sufficient-buffer-space-or-because-a-queue-was-full.aspx
    Regards,
    Michelle Li

  • Backend checks could not be performed. Inform system admin

    Hello SAP Experts,
    We have encountered the error Backend checks could not be performed. Inform system admin in a lot of POs in SRM. We are using SRM 7 and SP12.
    Before the error occured, the WBS elements were not maintained in SRM but the POs were created since our SHC has automatic approval.
    Currently, the WBS elements are now in SRM but the POs are stucked with the error Backend checks could not be performed. Inform system admin.
    We have informed the Basis team if there are any issues in the RFC connections but there is no error.
    The only POs affected were the ones wherein the WBS element was not maintained before but is now maintained in SRM.
    Regards,
    Romeo

    Hi Chandra,
    Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
    Regards,
    Ravi G

  • RDS Gateway 2012, RemoteApp Displays "A Revocation check could not be performed for the Certificate" via RDWEB

    I have searched through the forums and there are a number of posts that are similar but all the checks they list seem to not apply to this one.
    My current setup is as follows
    All Servers are 2012 R2
    1 x DC server
    1 x RDS Gateway server with RDS Web installed
    1 x Session Host Server
    Certificate supplied by godaddy with 5 names. (included is the name of the RDS Gateway/Web server in the certificate, the internal name of the session host server is not included as the internal names are differnet to the external)
    My tests are as follows
    Navigating to the RDSWEB page from a machine inside the same network (windows 7 sp1) but not on the same domain is fine no errors and logging in and launching any published application is fine with no errors.
    However logging in on another machine that is external from the network (windows 7 sp1) is ok up to the point of launching any of the published apps I get the error about ""A Revocation check could not be performed for the Certificate". this
    prompts twice but does allow you to continue and login and use the app till the next time. If I view the certificate from the warning message all appears to be ok with all certs in the chain.
    I have imported the root and intermediate certs to each of the gateway/rdsweb server and session host server into the computer cert store just to be on the safe side. This has not helped, I have also run the following command from both windows 7 machines
    with no errors on either
    certutil -f –urlfetch -verify c:\export.cer
    I cant seem to see where this is failing and I am beginning to think there is something wrong with godaddy cert itself somehow.
    If I skip rdsweb and just use MSTSC with the gateway server settings then I can login to any machine on the network with no errors so this is only related to launching published apps on the 2012 R2 RDWEB or session host servers.
    Any help appreciated

    Hi,
    1. Please make sure the client PCs have mstsc.exe (6.3.9600) installed.
    2. If you are seeing a name mismatch error, you can set the published name via this cmdlet:
    Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
    http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
    To be clear, the above cmdlet changes the name that shows up next to Remote computer on the prompt you see when launching a RemoteApp.  You should have a DNS A record on your internal network pointing to the private ip address of your RDCB server. 
    Additionally, in RD Gateway Manager, Properties of your RD RAP, Network Resource tab, you should select Allow users to connect to any network resource or if you choose to use RD Gateway Managed group you will need to add all of the appropriate names to the
    group.
    For example, when launching a RemoteApp you would see something like Remote computer: rdcb.domain.com and Gateway server: gateway.domain.com .  Both of these names need to be on your GoDaddy certificate.
    Please verify the above and reply back so that we may assist you further if needed.  It is possible you have an issue with the revocation check but I would like you to make sure that the above is in place first.
    Thanks.
    -TP
    Thanks for the response.
    To be clear I am only seeing a name mismatch and revocation error if I assign a self signed cert to the session host as advised earlier in the thread by "Dharmesh Solanki", if I remove this and assign the 3rd party certificate I then
    just get the revocation error , I have already ran the powershell to change the FQDN's but this has not resolved the issue although the RDP connection details now match the external url for RDWEB when looking at one of the remoteapp files. The workspace
    ID still shows an internal name though inside this same file. 
    RD Gateway is already set to connect any resource, when connecting using remote app both names (RDCB/RDGateway) show as being correct and are contained within the same UCC certificate. I also already have a DNS entry for the Connection broker pointing to
    the internal ip.
    Do you know if the I need the internal name of the session host servers contained within the same UCC certificate seeing as they are different fqdn's than what I am using for external access ? I resigned the UCC certificate and included the internal name
    of the session host server to see if this would help but for some reason I am still seeing the revocation error. I will check on a windows 8 client pc this evening to see if this gets any further as the majority of the testing has been done on windows 7 sp1
    client pc's
    Thanks

  • The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...

    Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
    (With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
    Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
    Some of our services are transactional, others are not.
    Each WCF service that is transactional has the following attribute on its interface:
    [ServiceContract(SessionMode=SessionMode.Required)]
    and the following attribute on the method signatures in the interface:
    [TransactionFlow(TransactionFlowOption.Allowed)]
    and the following attribute on every method implementations:
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    In my data access layer, all the transactional methods are set up as follows:
    using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
    using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
    cmd.ExecuteNonQuery();
    using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
    ... Perform actual database work ...
    Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
    There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
    As I mentioned before, in most cases, this all works fine.
    Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
    Sometimes the error is:
    Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
    This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
    Most often, however, the error is this:
    System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
    Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
    I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
    Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
    I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
    So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea  DistributedIdentifier on the server-side, but it still doesn't fix the problem.
    It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
    In the eventlog I get a series of events:
    1 (from MSDTC): "The MS DTC service is stopping"
    2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
    involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
    message only. No user action is required."
    -- Folowed by these 3 identical messages
    3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
    Allow Remote Administrator = 0,
    Network Clients = 1,
    Trasaction Manager Communication:
    Allow Inbound Transactions = 1,
    Allow Outbound Transactions = 1,
    Transaction Internet Protocol (TIP) = 0,
    Enable XA Transactions = 1,
    Enable SNA LU 6.2 Transactions = 1,
    MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
    Firewall Exclusion Detected = 0
    Transaction Bridge Installed = 0
    Filtering Duplicate Events = 1
    This makes me wonder if there's something maybe holding a transaction open somewhere?

    The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
    Below is the actual sql statement issued
    SET XACT_ABORT ON
    BEGIN TRAN
    insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
              ,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
              ,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
              values('IS2755','2010-06-01',
    '2010-06-01','.5',     'LWOP'     ,'PERSONAL'     ,'F',     'F',     'EUINTGR',
    '20101',1,1,0,'ENTRY')
    rollback TRAN
    OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 7391, Level 16, State 2, Line 3
    The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
    Able to execute the above statement successfully without using transaction.We need to run the statement with transaction.

  • SPL external data - SPL screening could not be performed

    Dear all
    My customer asked me to screen a list of ca. 4.000 (external) partners via t-code /SAPSLL/SPL_CHS03 .
    The system stopped processing with the following message: 'Sanctioned party list screening could not be performed.'
    Checking on possible root causes, I did the following:
    1. CONS system: Reduced workload to 100 partners, then increased the amount step-by-step to check on a possible workload limit. Surprisingly, in the end I could process all 4.000 partners without problem!
    2. Trying again in PRD system: Same problem as before. Using even 2.000 partners, the system will tell me ' Sanctioned party list screening could not be performed'. But increasing the amount from a low data volume seems possible.
    ^^Is that a known / typical error of the SPL screening? I would like to learn more about that strange system behaviour. If you know about possible solution approaches, I would be grateful for sharing. Thank you guys!
    Best regards
    t.

    Hi Tzunami,
    This issue can occur due to duplicate entries in the list you are trying to screen. It can also occur if there are no duplicate entires in the list, yet the system is reading them as duplicate.
    Initially the list may not look like it has any duplicate entries but when the system begins, it may read the entries as duplicate due to a system limitation.
    The maximum length of a business partner is 8 numbers and therfore for example the system will read the following:
    2140002826 -> becomes 21400028
    2140002896 -> becomes 21400028
    4961001220 -> becomes 49610012
    4961001203 -> becomes 49610012
    These "duplicate" entries will lead to the end of the program as you have described.
    Best Regards,
    Eoin Hurley

  • Analysis could not be performed in time. There is a possible serious performance issue

    Can someone please advise what I need to do to correct this critical error?
    My computer is VERY slow and when I ran the event viewer, this is listed as CRITICAL.  Any information would be appreciated.
    Log Name:      Microsoft-Windows-Diagnostics-Performance/Operational
    Source:        Microsoft-Windows-Diagnostics-Performance
    Date:          6/24/2010 10:18:46 AM
    Event ID:      400
    Task Category: System Performance Monitoring
    Level:         Critical
    Keywords:      Event Log
    User:          LOCAL SERVICE
    Computer:      user-PC
    Description:
    Information about the system performance monitoring event:
         Scenario  : System Responsiveness
         Analysis result  : Analysis could not be performed in time. There is a possible serious performance issue
         Incident Time (UTC) : 6/24/2010 5:17:07 PM
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{cfc18ec0-96b1-4eba-961b-622caee05b0a}" />
        <EventID>400</EventID>
        <Version>1</Version>
        <Level>1</Level>
        <Task>4005</Task>
        <Opcode>37</Opcode>
        <Keywords>0x8000000000010000</Keywords>
        <TimeCreated SystemTime="2010-06-24T17:18:46.941Z" />
        <EventRecordID>5491</EventRecordID>
        <Correlation ActivityID="{00000000-E6C8-0000-F4BB-058D9113CB01}" />
        <Execution ProcessID="1884" ThreadID="5956" />
        <Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
        <Computer>user-PC</Computer>
        <Security UserID="S-1-5-19" />
      </System>
      <EventData>
        <Data Name="ShellScenarioStartTime">2010-06-24T17:17:07.442Z</Data>
        <Data Name="ShellScenarioEndTime">2010-06-24T17:17:12.442Z</Data>
        <Data Name="ShellSubScenario">1</Data>
        <Data Name="ShellScenarioDuration">5000</Data>
        <Data Name="ShellRootCauseBits">0</Data>
        <Data Name="ShellAnalysisResult">2</Data>
        <Data Name="ShellDegradationType">1</Data>
        <Data Name="ShellTsVersion">1</Data>
        <Data Name="ShellMachineUpTimeHours">0</Data>
        <Data Name="ShellMachineSleepPattern">0</Data>
      </EventData>
    </Event>

    I do get the same problem. It believe it started after I switched from HDD to SSD some month's ago. My machine is very fast now so I do not have performance problems (only a very slow power on boot).
    The description above is exactly the same as I have.
    Does somebody has the same problems?

  • Macbook Air 10.8.2 crashes after update. Gave a message "Some updates could not be performed due to an error"

    3 of our mid 2012 Macbook Airs10.8.2 crash after update. Gave a message something like this "Some updates could not be performed due to an error" and now when rebooting I see panic...Unable to find driver for this platform...
    I don't want to udate any more of these (I have 31) until I know what is causing this problem. Will I have to reimage these machines?

    If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used to upgrade.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

  • Error help- "the operation could not be performed ...file... doesn't exist"?

    Hi,
    I am experiencing some probmels with ICE and can't find a reason for why.  I was able to edit the pages on the site through ICE about a month ago, but the client just let me know they can't do anything for any page.  I also can't do anything for any pages I was able to previously edit.  Basicall, I get this error message after being able to log in, edit page, and click save draft/ changes I get the following error:
    "The operation could not be performed because the file can't be accessed or doesn't exist..."
    I have looked extensively at these threads: http://forums.adobe.com/thread/444356?tstart=60
    and http://forums.adobe.com/thread/432559?tstart=0
    From that I have tried the following:
    Made sure passive FTP was working properly
    Verified FTP Dreamweaver connection with same FTP account: all is good and i can change and put the pages in question on the server.
    Verified tags in page (I think I have most pages correct.- although I know some are still not div tagged correct, but don't think thee issues are related.)
    verified that the directory settings on the adobe account (which is the root) is only "/"
    Tried editing in both Safari and FF and the client tried in IE and FF (all most recent versions I think)
    No progress has been made.  Actually now my adobe account for managing my sites is not allowing me to manage "settings" for this site either.  The tab is there but doesn't have the word settings on it and therefore I can't click it anymore
    Here is the site: www.extremecommunitymakeover.org.  I know for sure I WAS able to edit the index, get involved, and contact us pages a moth ago and now I get the error.
    Also- another maybe related problem is that I can't actually duplicate or create new pages via ICE.  Everything I try to name the new page gets kicked back and the dialog box says error says the "file extension is invalid".
    So- I seem to have a couple problems possibly all related to each other and your help would be much appreciated.
    Thanks,
    Sean

    Here's the setup on the two machines in particular...
    Machine #1:
    XP Pro
    Was IE7, now latest FF
    No antivirus
    Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
    Machine #2:
    XP Pro
    IE7
    Again, No AV… had Kaspersky… but uninstalled it
    Windows Firewall
    Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
    ....STUMPED!!!   

  • The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

    I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
    The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
    Here is code that illustrates what I am doing:
    DECLARE @MDX varchar(max);
    SET @MDX='
    SELECT
    [Measures].[Extended Service Count]
    } ON COLUMNS,
    NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
    ON ROWS
    FROM (
    SELECT
    {[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
    FROM [MyCube]
    /* Test 1 */
    EXECUTE(@MDX) at SSASLinkedServer;
    /* Test 2 */
    DECLARE @ResultsB TABLE (
    Manufacturer varchar(255)
    , ExtendedServiceCount float
    INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
    Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
    Other articles I've found so far don't seem to apply to my case.  I am not creating any explicit transactions in my code.   When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
    Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
    Any ideas?
    -Tab Alleman

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • ERROR: The operation could not be performed because the file can't be accessed or doesn't exist. Please contact your web developer to correct the problem.

    Only on one page, the client is receiving this error:
    Error - The operation could not be performed because the
    file cant be accessed or doesnt exist. Please contact your web
    developer to correct the problem.
    I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
    ??? Any ideas ??? Anyone else had this happen?

    Here's the setup on the two machines in particular...
    Machine #1:
    XP Pro
    Was IE7, now latest FF
    No antivirus
    Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
    Machine #2:
    XP Pro
    IE7
    Again, No AV… had Kaspersky… but uninstalled it
    Windows Firewall
    Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
    ....STUMPED!!!   

  • Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

    My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
    In my web.config file, I have the following as suggested by many for solution:
    <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
     <add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    However, the error is persisting.  I have no clue how to fix this.  Hope someone can help.

    Hello FredVanc,
    As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
    https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
    https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
    By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
    http://forums.asp.net/
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error - The request could not be performed due to an error from the I/O device

    Hello, 
    I have a Hyper-V server with a few virtual machines. 
    The host runs Windows Server 2012 R2 with Hyper-V. 
    VMs are Windows Server 2012R2 Generation 2 and Windows Server 2003 Generation 1. 
    All VMs running on VHDX on local host disks, no raid, no storage. Most VMs run on dedicated disks. 
    I am having the following error when I demand large amount of I/O on VMs:. "The request could not be performed due to an error from the I/O device" 
    This error happens when I run robocopy which requires large amount of writing, or on a SQL 2014 VM which also requires many reads and writes. 
    Whenever this error occurs, the replicas of the VMs require resynchronization and the MSSQL service stops. 
    Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs. 
    Is there any special configuration that must be done to avoid these errors? 
    Thank you! 
    Rafael

    Hi Eng.Rafael Grecco,
    >>Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs. 
    >>Chkdsk /r didn't return any error.
    It seems that it is not a hyper-v issue .
    I would suggest you to keep the driver up-to-date for your hyper-v host .
    In addition , here is a similar thread :
    http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/the-io-operation-at-logical-block-address-for-disk/23c32152-c2a6-4c6d-b229-95dc1470231a
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Could not retrieve deployment system configuration

    I use NWDS 7.1 and i want to deploy an external deployable archieve file,when i deploy , i get error says that "Could not retrieve deployment system configuration for ABP"
    Before that, i made settings under SAP AS Java by adding new SAP system, giving  hostname and instance number . I managed to add new SAP server successfully...
    Is there another settings that i forgot..and settings of editon 7.1 is different from 7.0...because in 7.0 it ask me hostname and MESSAGE SERVER PORT..
    What can i do ?
    Thanks a lot..

    The problem I faced was related but just slightly different - solution is below.  This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
    Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio  to server CE 7.2 AS Java was:
    Could not retrieve deployment system configuration for CE1. Please check if the system is running.
    [ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
    Thread[Thread-22,5,main]]
    Issue is a firewall problem.  Solution  is:
    1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
    2) shutdown NWDS
    3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
    4) open NWDS
    5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
    6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
    7) publish ear.
    8) navigate to: http://192.168.1.16:50000/ConverterWeb/
    obviously you'll need to replace the internal ip with the ip of your server.
    I think this firewall info is somewhere in the docs.
    Edited by: adamtarshis on Jul 11, 2010 8:16 AM

Maybe you are looking for