Assign User Profiles and Web Interface Transactions to Users

Hi EM Gurus,
Has anyone worked with not standard scenarios in SCEM?
They are working well but I can't access them on interface web.
In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
Has anyone accessed not standard scenarios on interface web??
Help, please!
Thanks a lot.
Rodrigo Freitas

Hello Rodrigo,
if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
/admin in the URL of the WCL instead /ehsearch.
Afterwards you should see them also in the drop-down box.
Best regards,
Steffen

Similar Messages

Resource assignment WMS- Defining user profiles and equipment profile

Can anyone please let me know how I can define the user profiles and equipment profiles in SAP WMS We have a decentralized WMS that we are implementiing . Can any one please let me know how I can define the user profiles and aalso the equipemtn profiles. Ability to skip tasks and task groups.
Thanks

Yes - this was the first set of information the OP dumped from his system. About line 5 of the post.
But I do wonder whether the 9.2.0.6 (not latest patch) makes a difference? Or perhaps the connect time is being used as part of a composite limit.

Firefox V33.0 can't find user profile and cant view window content

Hello
I have used Firefox since the old days, wayyy back. Never an issue, always worked, always performed.
My Firefox (v32 I believe), automatically downloaded and applied the v33 browser and immediately, everything went wrong...
First, the browser loaded but the screen was either sheet black or sheet white, then reloading (after closing the window) was informed (only via the window title as all else was block black) that Firefox couldn't see a user profile.
I loaded FF with safe mode and disabled everything (list of addons at the bottom of this post), and the browser loads now and I can see content, but then after only a minute in "safe mode" firefox persistently returned with either a fatal crash or a sudden inability to find the user profile (causing exit).
Reading up about possible workarounds, I eventually managed to export the Profile data (to desktop), to clear the profile data and replace data with desktop copy. Clearing the data took several attempts due to firefox display only showing black or white as stated above, but firefox then couldn't "import" profile as I can't see whats going on in the window.
Eventually manually installed profile data (from desktop automatic copy) to firefox but FF still persisted in crashing to desktop and not displaying correctly if not in Safe mode. I eventually uninstalled firefox and reinstalled from scratch. The reinstall persisted with all the above mentioned issues, I did manually reinstate the FF user profile and crashing to desktop is now rare but does still happen, now it usually happens when Firefox is not the current active window.
Firefox still does not display correctly unless in the "Safe Mode".
Any clues or help or suggestion about why this would happen? Any way I can revert to version 32?
My Addons :
No Services.
Appearance, default only
PLUGINS:
VLC plugin 2.1.3.0
Silverlight plugin 5.1.3
shockwave flash 15.0.0
Quicktime plugin 7.7.5
Java platform SE7 U67 10.
Google Update (disabled)
Adobe Acrobat 11.0.9
EXTENSIONS:
British Dictionary (not compatible with v33!!, disabled)
Colorzilla 2.8.1
cssUpdater 0.5.2 (disabled)
Dust-Me Selector [for CSS] 4.1
Firebug 2.0.3 (and associated FireDiff, FirePHP, EventBug)
enabling / disabling all/any of these does not (so far) change the graphical fault loading Firefox outside of Safe Mode.
Any ideas?
cheers
P.S>As additional info: I have tried the "reset firefox" but this caused numerous little bugs with saving the profile user data. Also reseting did not fix any of the issues.
Everything else on my computer works fine. No virus, no malware (Eset / MWBytes) all other programs fine, and FF was fine until V33!!

Hi for the crashes that are continuing, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

How to get user profiles and tasklists in axf

Hi,
We have configured the the views in the BPM Worklist ,restart all the managed servers like SOA Server,IPM Server and UCM Server.
After that navigate to url-http://ipm:16000/imaging/faces/Driver.jspx to configure command driver input parameter settings-like SolutionNamespace
CommandNamespace and provide the username.
After clicking on Execute request it generates the conversation id but when we clicked on Execute Response button the AXF Task lists and user profile fields are empty.
can anybody suggest the way to get user profiles and axf tasklist?
Snehal

Assign proper groups and/or users to BPM view created.
In IPM login and logout for that user. It will start appearing.
Regards,
Vikrant Korde

UPRE to replicate User Profiles and Managed Metadata to High Availability backup farm

I'm working on a HA project, and have been tasked with replicating our User Profiles and Metadata to a newly created farm. I'll call the current production farm FarmA and the new HA farm FarmB. I've installed SharePoint2010AdministrationToolkit on FarmB,
and used SPDiag to generate my first report on FarmB.
We're not using MySites.
I'm looking at
http://technet.microsoft.com/en-us/library/jj891109(v=office.15).aspx and have some questions. Anything I do on FarmA will be done thought a Change Control, and I want to be able to answer questions intelligently.
Does SharePoint2010AdministrationToolkit and UPRE have to be installed on FarmA and FarmB?
Does enabling DTC create any security concern? Or performance hit? I haven't done this before.
Any documented risks with using the replicator?
Are scheduled replications typically 1 weekly full with nightly incrementals?
Anything the replication won't copy over to FarmB? Like Synchronization Connections, or additional/custom fields?
How are GUIDs handled?
Sorry to pack 6 questions into one post ;)
Thanks,
Scott

To answer the first question this is what MS says: The User Profile Replication Engine can be installed on any computer that has access to the source User Profile service application and destination User Profile service application. However, we recommend
that you install the User Profile Replication Engine on a computer that is part of the source farm or on a computer that is connected to the subnet of the source domain. The User Profile Replication Engine uses the SharePoint Server 2010 User Profile and User
Profile Change Log to read and write data between user profile stores. http://technet.microsoft.com/en-us/library/cc663011(v=office.15).aspx And to answer 4th question its true but full sync will only be required initially and only when there is org changes
most of the time its incremental. To my knowledge FULL replication will bring all the details but not sure though.

Cisco 4402 WLC IOS Upgradation using CLI and Web Interface

Hi,
I would like to know how to upgrade IOS of Cisco 4402 WireLess LAN Controller using CLI and Web interface ?
Can any one help me regarding the same.
Please answer as soon as possible.
Thanks in advance.

Here are the instructions for upgrading the controllers via GUI:
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn52.html#wp472449
Instructions via cli:
Cisco recommends that a direct CLI console port connection is used to update the controller software.
1. Make sure a TFTP server is available for the Operating System (OS) software download. Also, keep these guidelines in mind when the TFTP server is set up:
If a download is performed through the service port, the TFTP server must be on the same subnet as the service port because the service port is not routable.
If a download is performed through the Distribution System (DS) network port, the TFTP server can be on the same or a different subnet because the DS port is routable.
The TFTP server cannot run on the same computer as the Cisco Wireless Control System (WCS) because WCS and the TFTP server use the same communication port.
2. Download the desired OS software update file from the Cisco website to the default directory on the TFTP server.
3. Log into the WLC CLI.
4. Issue the ping server-ip-address command to verify that the WLC can contact the TFTP server.
5. Issue the transfer download start command and answer n when prompted to view the current download settings.
This example shows the command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
6. TFTP Path...................................... TFTP Filename.................................. AS_2000_3_0_x_x.aes --OR-- AS_4100_3_0_x_x.aes --OR-- AS_4400_3_0_x_x.aes Are you sure you want to start? (y/n) n Transfer Canceled Issue these commands to change the download settings:
* transfer download mode tftp
* transfer download datatype code
* transfer download serverip tftp-server-ip-address
* transfer download filename filename
* transfer download path absolute-tftp-server-path-to-file
Note: All TFTP servers require the full pathname. For example, in Windows, the path is C:\TFTP-Root. (In UNIX forward slashes (/) are required.)
7. Issue the transfer download start command to view the updated settings, and answer y when prompted to confirm the current download settings and start the OS code download.
This example shows the download command output:
transfer download start
Mode........................................... TFTP
Data Type...................................... Code
TFTP Server IP.................................
xxx.xxx.xxx.xxx
TFTP Path......................................
path>
TFTP Filename..................................
AS_2000_3_0_x_x.aes --OR--
AS_4100_3_0_x_x.aes --OR--
AS_4400_3_0_x_x.aes
Are you sure you want to start? (y/n) y
TFTP Code transfer starting.
TFTP receive complete... extracting components.
Writing new bootloader to flash.
Making backup copy of RTOS.
Writing new RTOS to flash.
Making backup copy of Code.
Writing new Code to flash.
TFTP File transfer operation completed successfully. Please
restart the switch (reset system) for update to complete.
8. The WLC now has the code update in active volatile RAM, but the reset system command must be issued to save the code update to non-volatile RAM (NVRAM) and reboot the WLC.
This is a sample output:
The system has unsaved changes.
Would you like to save them now? (y/n) y
The controller completes the bootup proce

Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki

User Profile Service failed the logon. User profile cannot be loaded

Hey
when I try to log on to the computer using a domain account, I get "User Profile Service failed the logon. User profile cannot be loaded" it allows me to login using the local account. I have restored the computer as far
back as it can go, I have taken it off the domain and re-joined it, I installed a program called 'Glary utilities 5' and ran a registry repair and that did not work either. I am now out of ideas :(
Was hoping someone has any more ideas I could try before doing a fresh install.
Thanks in advance

Hi,
Have you checked the solutions mentioned in the the followng link?
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215/en-us
Check your event viewer for detailed information, the following link can also be helpful
http://blogs.technet.com/b/asiasupp/archive/2010/11/24/user-profile-cannot-be-loaded-with-event-id-1509-detail-the-filename-or-extension-is-too-long.aspx
Yolanda Zhu
TechNet Community Support

The user profile service failed the logon. User profile cannot be loaded, WIN7 dual boot

Hi all,
I just got a new x201, which I installed ubuntu on a second partition. For a while the two systems were getting along fine, and I was able to switch between them without problems. on my last login it won't accept my credentials (pw or biometric) and says "The user profile service failed the logon. User profile cannot be loaded" and then returns to the login screen. Any ideas on how to fix this without nuking the system?

Hi, I'm having the exact same problem as little_teapot , I cannot get past the login screen. I went onto the Toshiba support site which asked me to do a system recovery using the F8 key on start up. So I tried this but the problem I'm having is when I turn on the computer holding in the F8 key, nothing happens, it just goes through start up as normal and then it just ends up at the login screen telling me that the user profile cannot be loaded. I've tried it a couple of times and I don't know if I'm doing something wrong with the safe mode start up? Also the notebook is a P500/020 and is only 2 months old running Windows 7? if anyone can help I would greatly appreciate it.
Thanks

The user profile service service failed to logon user profile cannot be loaded on Windows 7 Home Premium

Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse

"Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
Good Afternoon Everyone,
I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my issue
... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
Very Respectfully,
Jesse
Home Premium cannot logon to a Domain, nor can it be set to try it.
when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
Noel Paton | Nil Carborundum Illegitemi |
CrashFixPC | The Three-toed Sloth

I have changed my icloud user Id and password, but the old user ID still pops up and ask my password. I cannot delete my old icloud account.

I have changed my icloud user Id and password, but the old user ID still pops up and ask for my password. I cannot delete my old icloud account as it keeps asking password of my old user ID. how can I rectify the problem?

Hey HKKL,
Thanks for the question. I understand you are having issue relating to the iCloud account after changing your Apple ID email address. The following article addresses this issue and potential resolution:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
https://support.apple.com/kb/TS5223
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Tap Settings > iCloud and try to sign out.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Tap Settings > iCloud and sign in with the new Apple ID.
Thanks,
Matt M.

Working on the User Profile and Mysite web

I just trying to get few information from a user (like if the mysite web exits) and working with that. The main problem is understand if the user has a mysite web and delete it if exists but to do that the only possible way seems using CSOM. Also I should
create a Powershell script for that. Did anyone never do that?
If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful"
salvatoredifaziosharepoint.blogspot.com
Twitter: @Salvodif
MVP SharePoint Server

Hi Salvo Di Fazio,
PeopleManager.GetMyProperties method returns a type of UserProfiles.PersonProperties, that represents the user profile properties.
PersonProperties contains a PersonalUrl property, that is the absolute URL of the user’s personal site.
We can use this property to check the user’s personal site, check whether it exists.
Following is an example about how to get user’s profile using CSOM:
How to: Retrieve user profile properties by using the JavaScript object model in SharePoint 2013:
http://msdn.microsoft.com/en-us/library/office/jj920104.aspx
Thanks,
Qiao Wei
TechNet Community Support

MySites User Profiles and User Hidden List

I would like to automatically activate all user profiles so I can assign an administrator to update all user information. The environment does have MySites setup but no one has permissions to create their own MySite site. Therefore,
when a user navigates to their profile page to edit their profile information they visit the URL http://server/MySiteSiteCollection/_layouts/15/start.aspx#/Person.aspx?accountname=domain\user
Right now, the administrator can only edit user profiles where the user had previously visited their user profile page, thus activating their user profile, which I assume adds an item to the hidden user list. However, the administrator cannot edit
any user profiles where the user had not yet visited their user profile site, thus generating an error. I would like to enable/activate all user profiles automatically without having to contact each user separately and asking them to visit their
profile page just to get it enabled for editing.
Does anyone know if there is a way via PowerShell to activate all user profiles?
Environment: SharePoint 2013

That is probably the best, most consistent way. It would be isolated to that particular SA, so there shouldn't be security concerns. Otherwise you'll constantly run into this issue.
This should work with SharePoint 2013:
http://blog.bugrapostaci.com/2011/10/03/create-all-users-personal-site-via-powershell-script-sharepoint-2010/
But you'd need to continually run it to capture new users.
Another one specifically for 2013 if the above doesn't work:
http://www.getinthesky.com/2014/04/powershell-create-mysites-users/
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Profile Manager Web Interface Not Loading

I set up a Mac mini with 10.9 and Server 3.1.2 to be our MDM server. After the initial configuration the https://<servername>/profilemanager and /mydevices web interfaces work just fine. I'm able to enroll five test OSX and iOS devices. Then I come in the next day and the /profilemanager web interface is unreachable. The /mydevices web interface still works though.
I tried reinstalling 10.9 and server and setting up from scratch and the problem repeats itself the next day. According to this thread deleting Server.app and reinstalling is one solution, but that did not work. I also tried resetting the Profile Manager, but that did not solve this issue either.
When trying to load /profilemanager on the server, a MacBook, and iPad, Safari will just hang when loading the page. The title bar changes to "Admin," the blue status bar hangs, and the page does not load.
This one is baffling. Any suggestions as to what to do would be most appreciated.

xcscredd(1156) deny file-read-metadata /Library/Server/ProfileManager
Process:         xcscredd [1156]
Path:            /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
Load Address:    0x10a244000
Identifier:      com.apple.XCSCredentialServer
Version:         1 (1.0)
Build Info:      255-XCSCredentialServer~32000000000000
Code Type:       x86_64 (Native)
Parent Process: launchd [1]
Date/Time:       2014-05-21 16:46:38.051 -0500
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 8
Thread 0:
0   libsystem_kernel.dylib                  0x00007fff965a20aa __getattrlist + 10
1   Security                                0x00007fff8c81f9de ___ZN8Security15cached_realpathEPKcPc_block_invoke_2 + 260
2   libdispatch.dylib                       0x00007fff8c95a28d _dispatch_client_callout + 8
3   libdispatch.dylib                       0x00007fff8c95b146 _dispatch_barrier_sync_f_invoke + 39
4   Security                                0x00007fff8c81f864 Security::cached_realpath(char const*, char*) + 148
5   Security                                0x00007fff8c676529 Security::DbName::CanonicalizeName() + 209
6   Security                                0x00007fff8c676418 Security::DbName::DbName(char const*, cssm_net_address const*) + 144
7   Security                                0x00007fff8c68292c Security::DLDbIdentifier::DLDbIdentifier(cssm_subservice_uid const&, char const*, cssm_net_address const*) + 100
8   Security                                0x00007fff8c6c53a4 Security::NameValueDictionary::MakeDLDbIdentifierFromNameValueDictionary(Securi ty::NameValueDictionary const&) + 206
9   Security                                0x00007fff8c6c4e82 Security::KeychainCore::CCallbackMgr::consume(unsigned int, unsigned int, Security::CssmData const&) + 192
10 Security                                0x00007fff8c7f679b Security::SecurityServer::NotificationPort::ReceiveImplementation(unsigned char*, unsigned int, Security::UnavailableReason) + 189
11 Security                                0x00007fff8c7f686b ___ZN8Security14SecurityServer16NotificationPort7receiveERKNS_12MachPlusPlus7Me ssageE_block_invoke + 21
12 Security                                0x00007fff8c7f6839 Security::SecurityServer::NotificationPort::HandleRunLoopTimer(__CFRunLoopTimer *, void*) + 19
13 CoreFoundation                          0x00007fff9127e494 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
14 CoreFoundation                          0x00007fff9127dfcf __CFRunLoopDoTimer + 1151
15 CoreFoundation                          0x00007fff912ef5aa __CFRunLoopDoTimers + 298
16 CoreFoundation                          0x00007fff91239755 __CFRunLoopRun + 1525
17 CoreFoundation                          0x00007fff91238f25 CFRunLoopRunSpecific + 309
18 Foundation                              0x00007fff908cfadc -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
19 Foundation                              0x00007fff9091810b -[NSRunLoop(NSRunLoop) runUntilDate:] + 78
20 xcscredd                                0x000000010a245e6f
21 libdyld.dylib                           0x00007fff8c9585fd start + 1
Binary Images:
       0x10a244000 -        0x10a256fff com.apple.XCSCredentialServer (1.0 - 1) <75a88431-46dc-35fc-8350-f97c59b411df> /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
    0x7fff8c670000 -     0x7fff8c8caffd com.apple.security (7.0 - 55471.14.4) <1d5da20e-db48-3e1d-9bf5-baa694192b25> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff8c955000 -     0x7fff8c958ff7 libdyld.dylib (239.4) <7c9ec3b7-dde3-33ff-953f-4067c743951d> /usr/lib/system/libdyld.dylib
    0x7fff8c959000 -     0x7fff8c973fff libdispatch.dylib (339.92.1) <c4e4a18d-3c3b-3c9c-8709-a4270d998de7> /usr/lib/system/libdispatch.dylib
    0x7fff90867000 -     0x7fff90b65fff com.apple.Foundation (6.9 - 1056.13) <2ee9ab07-3ea0-37d3-b407-4a520f2cb497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff911c9000 -     0x7fff913aefff com.apple.CoreFoundation (6.9 - 855.16) <a63e680e-e4b2-368b-8564-9dbe0d8ddb91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff9658d000 -     0x7fff965a9ff7 libsystem_kernel.dylib (2422.100.13) <498aebd7-4194-3cf2-aa16-d5d03ffbd8c0> /usr/lib/system/libsystem_kernel.dylib

ITunes 12.1.2.7 works for one user profile and not another on the same PC

When using iTunes 12.1.2.27 with my user profile in Windows 7, it will run for about a minute before I get the message that iTunes has crashed and that Windows is searching for a solution. It never finds one, and the problem persists. I've tried doing a restart of the computer and uninstalling and reinstalling iTunes. Nothing works.
However, my wife has a separate user profile on the same computer. The same installation of iTunes that crashes with me works as it should when she uses it with her profile. What's going on, and how do I fix it?

See Fix unexpected quits or launch issues in iTunes for Windows - Apple Support.
tt2

Assign User Profiles and Web Interface Transactions to Users

Similar Messages

Maybe you are looking for