Assign VLAN by MAC for one device

Is it possible to assign a single device to a vlan by its mac address?
On a Dell 6248 I could use
vlan association mac 1111.2222.3333 12

Hi,
I don't think there is a command to assign a device to a VLAN by using it's MAC address. But it can be done by setting up a VMPS (Vlan Membership policy server). Which dynamically assigns VLANs to the devices using their MAC or IP address.
Rate if you find this helpful.
Regards,
Chandu

Similar Messages

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

open an app and click help>activate.
if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

AP Ex access works for one device connection, 2nd device gets booted off

I have a brand new 1 TB Time Capsule AirPort Extreme set up with PPPoe, and an AT&T Motorola 2210-02 modem set up PPP ("Private IP for LAN device").
screen shot:
http://courses.wccnet.edu/~klund/ss/sstimecapsulesettings.png
(This was the only way I could get it to work after trying several other configurations.) My MacBook Pro AirPort is able to connect; however we have an LG Blu-ray player with wireless access and when I turn that on it kicks the laptop off.
screen shot:
http://courses.wccnet.edu/~klund/ss/ss_kickedoff.png
In addition, I'm not able to connect with my iPod touch after the password is accepted.
I had this exact problem with the older AirPort (UFO looking one) and was told by several store people that it probably just crapped out. (It had been working fine with more than one device at our previous residence - when we moved the only new variable was the Motorola modem.)
I couldn't find other posts like this, I hope this isn't redundant.

a2kirsten wrote:
I reset the modem and the TC and tried several configurations, i.e. modem in bridge/TC PPPoE; modem with PPP/TC in bridge; I also tried the TC with "Share a Public IP address" and got the error "+The DHCP range you have entered conflicts with the WAN IP address of your AirPort wireless device+".
When I did the TC in Bridge mode (+ modem PPP) I got a Double NAT error and as soon as the setup was finished I got the kickoff message again.
http://courses.wccnet.edu/~klund/ss/ss_modemPPP-TCbridge.png
That screen shot shows why you're seeing those messages about "another device on the network ..." The Time Capsule is using that same IP address.
The interface for the modem only gives me the 3 choices for bridge mode vs. PPP etc, there aren't any manual configuration options that I can locate.
I'd try all three options. For the option "PPP is on the modem" I would have thought that putting the Time Capsule into bridge mode would work, but evidently it did not. For either of the other options ("PPP is on the computer" and "Bridged Mode") I'd configure the Time Capsule to connect using PPPoE.
The Time Capsule Manual says this, to my further confusion:
+The Time Capsule has three hardware addresses printed on the bottom of the case:+
+-AirPort ID: The two addresses used to identify the Time Capsule on a wireless+
network.
+-Ethernet ID: You may need to provide this address to your ISP to connect your+
+Time Capsule to the Internet.+
Those three "hardware addresses" are MAC ("Media Access Control") addresses. Those are assigned by the manufacturer and are completely different from IP addresses.

How do I save multiple backups for one device in iTunes?

Hey, I manage multiple iPads here at my school and had a question about iTunes backup. We want to have multiple backups from the past for each device so that we can restore the device from an old backup if something goes wrong. We have over 180 iPads so I need something quick and automated. Any ideas?
We are also using a Mac Server if that helps any.

Since what we're really talking about now is a script to basically rename files you might want to ask on a more specific Applescript or automator forum. Alternatively, perhaps one of the utilities below might suffice.
-- Renaming Utilities --
These are older links but they may have been updated for later OS versions.
NameChanger http://www.mrrsoftware.com/MRRSoftware/NameChanger.html
Renamer4Mac http://renamer4mac.com/batch-rename-files-on-mac-osx.html - now shareware but older versions may still be free.
psrenamer http://www.powersurgepub.com/downloads.html#psrenamer - Java based (=slightly slow) free utility.
Name Mangler http://www.manytricks.com/namemangler/ - requires OS 10.5+, but File List http://www.manytricks.com/download/filelist is an older version for pre-10.5.
http://www.publicspace.net/ABetterFinderRename/ - $20

How do I change an Apple ID just for one device, an iPod Touch?

Hello, all...I recently purchased my nephew (I'm his guardian and am raising him) a brand new iPod Touch for his 13th birthday. I activated the device using my Apple ID (which I also use for my iMac, iPhone and Macbook Air). I'm thinking now about changing his iPod over to a different Apple ID to keep my iCloud "pure" (for lack of a better word), with just my stuff on it, and because his iPod is mysteriously picking up text messages to me that are supposed to go to (and which still do go to) my iPhone. Is it possible to change the Apple ID for just that one device, the iPod and, if so, how does one do that? I have several e-mail accounts/addresses that I could use instead of the one I use for my current Apple ID. I'm technology-challenged in the worst way, so your help/advice is greatly appreciated. Thanks!

CHANGE ID
The ID is used in the following locations and you have to change them.
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
Settings>iCloud
and Settings>iTunes and App store
You have to sign out of ID (for iCloud you delete the iCloud account from the iPod) and sign in with other ID.
Note the following are resolved if you use Family Sharing (iOS 8 and later):
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
If the iPod has iOS 7 or later then you have the enter the password for Apple ID presently sign in Settings>iCloud.
Also, a Restriction can be set (Settings>General>Restrictions) the prevents changing accounts

Expanding Control for One Device to Ten Device

Hi
Right now I'm working on a project where I have to modify the LabVIEW code written by someone else. The code is already proven to work for just one device, and I have to figure out a way to make it such that can control ten devices. I'm thinking of using the current code, and adding a drop-down box with device names 1-10 and when clicking on each individual one, the input and indicator values will change accordingly.
However, I have a few questions about implementing this.
How do I handle the DAQ assistances such that when I change the device number in the drop-down box, that I don't change the actual input, only have the input shown (i.e. make sure the input to the actual devices are what I want but it only shows on the front panel the values for whatever device number I select). Would I need multiple DAQ assistances?
With regards to the drop-down menu, would a normal drop-down menu be best, or is the better option to go with an enum or a listbox?
Thanks

Try avoiding multiple DAQ assistants. Actually, I would recommend using the DAQmx VIs instead, because, they offer more control and higher performance. If you would like to keep using the DAQ assistant, you can follow this instructions, simply add more channels using the blue plus icon. Make sure the device name in MAX and the DAQ assistant match with the hardware. If you have problems with this use the green arrow, on the channel settings section, and select the physical channel that you are targeting. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

Assign Multiple Sales Org for One Plant in STO process

Hi Experts,
Aware that I can assign multiple sales org to 1 plant (relationship: many to many).
I am trying to create STOs to supplying plant and assigning them to different sales organization but encountered problem.
Example:
Supplying Plant 1000 - Sales Org 1000A (food) and 1000B (apparel)
Receiving Plant 1100
Plant 1100 wants to issue 2 STOs to Plant 1000 - 1 for each Sales Org (for instance STO1 to food division, and STO2 for apparel division).
However, when I tried creating STO in the system, noticed that in the shipping tab (item details) the sales org, DC has been assigned to 1 particular assignment and data is locked.
Tried to get into SPRO to configure and define the shipping data for plants but noticed that it's 1 to 1 relationship (SPRO - IMG - MM - PO - Set up Stock Transport Order - Define Shipping Data).
How can this be done?

You can set different sales areas (~sales organisation) for one plant in SAP - based on issuing SLoc provided STO between storage locations is activated.
SPRO > Materials Management > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Define Shipping Data for Stock Transfers Between Storage Locations
Edited by: Csaba Szommer on Jul 2, 2011 6:14 PM

DFM database delete for one device

Hello,
I want to delete DFM database for one of devices in LMS 4.2. Or just delete and add that device in DFM (if possible in lms 4.2, in 3.2 it was posssible).
Regards,
Mladen

As DFM depends of SNMP output from the device to show all this info, before we claim it corrupt, lets check directly for the interface details.
For this show the CLI output of the device:
show run interface <int_name>
show snmp mib ifmib ifindex <int_name>
Example if it is Ethernet2/1
show run int Ethernet2/1
show snmp mib ifmib ifindex Ethernet2/1
The output would be similar to :
Router# show snmp mib ifmib ifindex Ethernet2/1
Ethernet2/1: Ifindex = 3
Do a snmpwalk on the following OIDs with the ifIndex number :
ifTable (1.3.6.1.2.1.2.2)
ifXTable (1.3.6.1.2.1.31.1.1)
Example :
snmpwallk -v2c -c public 10.10.10.10 ifTable.3
Please share the output for me to check more.
Also, for the device, to remove the entire details, we have no option left than to delete it from DCR and add it back after a short while.
-Thanks
Vinod
**Encourage Contributors. RATE them. **

Is an iOS 8 update downloaded in iTunes for one device applicable to other devices?

I am updating to iOS 8 and have many iOS devices. If I download an update for one in iTunes, can I also use that download for the other devices or I have to download an update for each device? Thanks.

IIf all of your devices are the same, you don't. But even iPhone 5s with different carrier may need different software.

Is it possible to make two different backups for one device?

So, here is the problem: i got an 8 gig 4, and since for now i didn't have enough money to buy, which i would like to have, a 64 5. I found out recently that social medias are wasting my memory, which also a problem that we can't delete caches. I'm just curious that if we can do more than one backup files from one device?

You can back up to both iTunes and iCloud. The following link has a section on using the two methods together. http://support.apple.com/kb/HT5262
Also, the following link gives the location of the iTunes backup and suggests including that in your regular computer backup -- which would effectively give you multiple backups via iTunes. http://support.apple.com/kb/ht4946

Open port for one device

Occasionally I need to open a port to one device on my network so a programmer has access to a home automation controller. Previosly I was using the RVS4000 with no problems. I would just put my port number in and tell the router what IP address the automation controller was at. I now have the RV180W and I've tried averything I can think of at this point. Any help would be gretaly appreciated!
Thank in advance

How did you do it on the rvs4000?
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

If I assign a static IP to one device, do I have to do it for all of them?

I'm setting up OS X ML Server on a Mini, and I'm trying to make the server accessible via VPN and a .com domain name I own. I've figured out how to make it work via local IP addresses (e.g. 10.0.1.X), and after poking about on the Network tab in the AirPort Utility I think I've figured out how I can assign my static IP to the server (switch from DHCP & NAT to DHCP only, and then set the DHCP range to include my allotted static IPs).
My question is this: If I switch to DHCP-only to allow me to attach the static IP to my server and change the DHCP Range to allow me to use my static IP, will this affect the ability of other devices to use the network? Or is there a better way to bind the IP to the server without having to change DHCP and NAT settings?

Ok.. the clarification is very important.. as using a block of public IP's is a totally different setup.
I have to confess it is not a setup I am much experienced in and it depends very much on the modem/router how the setup has to work.. normally you set the router itself to take one IP in the block.. and then you should be able to just use dhcp for the others. But you can ensure each device keeps the same address via the dhcp reservations.. but I have never seen details on this setup on a TC.. or paid attention if I did read them.
Here is something I found with a quick google.
It is exactly the router I would suggest using btw instead of the TC.
http://www.jeffryhouser.com/index.cfm/2012/3/26/How-can-you-use-Static-IPs-with- ATT-UVerse-Service
Using a vpn router makes life so much easier as the end points on the router itself work for the whole network.
I would spend a bit of time exploring how people have setup block of IP but I cannot find much with TC.. perhaps broaden the search to any apple router.

VLAN assignment depending on AP for one SSID

Hi,
I read the AP Group VLANs with WLC configuration examples but did not find exactly what I look for. I'm on a WLC 5500.
I try to create AP groups which broadcast a set of SSID, but inside AP groups, depending on the AP on which the connection is made, i want to assign a specific VLAN for the clients.
If connection is made on SSID1 and AP1 -> one VLAN, for example VLAN_SSID1_AP1
same for SSID1 and AP2 -> another VLAN, for example VLAN_SSID1_AP2
I want to assign some VLANs to one of my networks to get local IPs depending on the AP.
The VLAN are all defined as dynamic interfaces, currently the SSID matches one VLAN, but i did not find how to do this assignment. I cannot define a VLAN for a network(SSID) and an AP.
Thanks for your ideas,
Christophe

You need to create two AP Groups. Both will have the SSID, but AP Group #1 will have SSID mapped to vlan 1 and AP Group #2 will have SSID mapped to vlan 2. Then you add the appropriate ap's to which group you want.

HT204053 I have multiple apple devices, 2x phones ipad etc, but all are through the same email and I only get the storage space for one device, what should I do?

I have multiple devices all under the same id and email but I don't get multiple icloud storage space and it's running out!
Can anyone help as I've just bought an iphone for my daughter and would like to link it as well.
Thanks in anticipation of your help.

One icloud account gets a 5 GB of storage, regardless of the number of devices connecting to it. But you're in luck, you can buy more storage for the account if you are running low.
As for your daughter, be sure to get her own icloud account, otherwise she'll end up getting all your email, contacts, etc. And if she deletes any of this data, it will be deleted on your devices as well. Note: you can all keep using the same ID for the itunes store for sharing purchased items.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/

Assign VLAN by MAC for one device

Similar Messages

Maybe you are looking for