Assigned Access stopped working - no longer lets me select an App

I have two Surface machines configured for Assigned Access, they are supposed to go in to a Museum Exhibition soon. I updated my app today and so had to reconfigure the two Surfaces (take them out of AA mode to install the new app). When I set AA back up,
it worked fine on one machine, but on the other, the App list will no longer update. I can assign the user but I can't assign any apps to the user. The only other thing that changed today was some Windows updates came down. Could that have messed thigns up?
I have tried removing the user and starting over but the result is the same. This is frustrating, and makes me nervous as I have a deadline to get these devices into the museum.
Please help.

Hi,
Make sure that you have the app installed under the account on which you want to transfer to another, otherwise you may fail to add this app, just like the screen below:
Then, I suggest to perform a system restore to solve this:
http://www.microsoft.com/surface/en-us/support/warranty-service-and-recovery/refresh-or-reset-surface
Regards
Wade Liu
TechNet Community Support

Similar Messages

My computer no longer lets me update certain apps, such as pages or iPhoto.

My computer no longer lets me update certain apps, such as pages or iPhoto. It says "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." Which is not true. Please HELP!

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

My Lightroom stopped working at all. I unistalled the app and installled back a few times and it still won't open.

My Lightroom stopped working at all. I unistalled the app and installled back a few times and it still won't open.

Are there any error messages? Mac or PC?

My bookmark no longer lets me select a tab

I think I down loaded a bookmark add on/extension, not sure, but my bookmark function no longer lets me select a tab when I bookmark a page. The only way I can find that page later is if it is still 'recent bookmarks'.
HELP

Hi Bonniw,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you do not receive sound for text messages. I would recommend that you read this article, it may be able to help the issue.
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Cheers,
Mario

The round button that allows me to get out of an app or to move or delete apps has stopped working. Once I am in an app the only way to get out of the app is to power off my ipod completely. Help!

The round button that allows me to get out of an app or to move or delete an app has stopped working. Once I am in an app, the only way to get out of it is to power off my ipod completely. Help!

Try this previous discussion:
FIX for iPod Touch Home Button: Apple Support Communities

Thinkvantage Access Stopped working

Thinkvantage Access connections main service stopped working this happenedafter devicedriver package, Install Microsoft network protocol happened automatically now i have no inter net connection, please can tell how to resolve this issue

Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John

Satellite R830 - USB3.0 port stop working after long time usage

Hi there,
This is my new laptop. I got it just one week. However, USB 3.0 port is very weird. It always stop working when i used it for several hours. I try to update the driver, but i still seems not working.
are there any other solutions?

>well, it will stop working as well when i use it as data transfer.
So how long does it take until the USB 3.0 port stops working?
Does it interrupt the data throughput?
Did you use the USB 3.0 compatible devices?
On the Toshiba European driver page you can find the USB 3.0 driver version 2.0.34.1.
Are u using this version?

Sharepoint HTTPS access stopped working suddenly

Hi,
we have a single server sharepoint 2013 server.
HTTP and HTTPS access are enabled for sharepoint site collection. The bindings and aam are set correctly.
The HTTPS access suddenly stopped working. Might be related to updates installation.
HTTP access is working properly.
When I create a new non sharepoint site in IIS the HTTPS access works.
When I create a new sharepoint site in IIS the HTTPS access does not work only HTTP access is possible. There is no response from the server.
Following event log error message might be related to this problem:
Schanel 36888 Error: A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel
error state is 1203.
I checked the ULS, Event logs, changed bindings, tried creating new sharepoint web applications to find the source,
Any ideas?
Thanks,
Andrej

Hi Andrej,
I think unless the issue for Schanel 36888 error is fixed,the HTTPS issue may not get resolve.
Please refer the below link which was resolved in different OS.
http://social.technet.microsoft.com/Forums/en-US/9dfb4d09-8096-40c9-ac75-1e23f75417c9/frequent-event-id-36888-windows-schannel-errors-in-the-event-viewer?forum=W8ITProPreRel
TLS and HTTPS:
TLS (Transport Layer Security) and SSL (Secure Sockets Layer) are protocols that provide data encryption and authentication between applications and servers in scenarios where that data is being sent across an insecure network, such as checking your email
(How does the Secure Socket Layer work?).
http://luxsci.com/blog/ssl-versus-tls-whats-the-difference.html
http://searchsecurity.techtarget.com/definition/Transport-Layer-Security-TLS
Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem.
s p kumar

CS5.1 - OpenGL stops working after making a lasso selection

I'm starting to tear my hear out at the moment. Everything was working fine with CS5.1 on a 32bit version of Windows 7, then out of the blue I got multiple warnings from windows saying that my hard drive was about to fail. Thankfully I managed to get everything backed up and got myself a new hard drive. I had been meaning to move over to Windows 7 64bit for a while now, and decided to take this opportunity to do just that. Everything installed fine and seemed to be working ok, then I tried making a selection in photoshop. The marching ants turned into a weird box thing, then when I panned around the canvas everything looked normal. Only OpenGL had stopped working, it was still enabled in the options, and it still worked fine on other canvasses. I made sure I had all the up to date drivers for my graphics card (A pretty old ATI Radeon HD4300), checked the updates for photoshop (CS5.1 ver 12.1 is what I currently have) and no updates were shown, I've also tried all the different settings for OpenGL within photoshop that I could find. I've searched both google and these forums and found similar problems to mine, but all were from a while back and the main suggestion I found was to update AMD's Catalyst Control Center from version 13.1 to 13.4 as there were known issues with 13.1 and photoshop. But my version is at 13.9 and I can't find a link to version 13.4 anywhere. So now i'm kind of out of ideas. The thing that confuses me the most is that on the same setup on a 32bit version of Windows, everything worked fine, but on the 64bit version I have problems.
I really can't afford to buy a new graphics card after unexpectedly having to buy a new hard drive, and I'd prefer not to go back to using a 32bit version of windows if I can help it. So if anybody can give any other suggestions it would be VERY much appreciated.
I hope this made sense, and thank you in advance for any help you may be able to give
EDIT:
It seems I was wrong about it being 'any' kind of selection. It only seems to happen with the lasso tool.

Something else occurred to me... Have you ever had a different brand card on your system? Seems unlikely, since it's a Win 8 setup, but if so sometimes remnants of older drivers get left behind and can mess things up for the newer card. I have heard of (though never personally used) a product called DriverSweeper. Also both ATI and nVidia I believe have removal tools available if you do a bit of web searching.
I hope you find a solution, but don't overlook the possibility of getting a newer video card to solve the issue. I moved up from a very nice ATI Radeon HD 5670 to a 7850 about a year and a half ago, and while I didn't think there'd be much difference, the newer card just does everything so much more smoothly that I'm glad I made the switch. Technology in GPUs really has been changing over the past few years, and they're not that expensive.
Best of luck.
-Noel

Pre-fetching of website stopped working, yet I have it selected as enabled

Hi,
Until today, every time I used firefox, once I'd start writing the address of the website, the address would come up entirely and I'd just have to select it. I think it's called pre-fetching of website?
Today, it just stopped working but I have not changed any of my settings.
Best,
Sandrine

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

Admin/upload access stopped working

We have been using a couple of pl scripts to get admin/upload access to our itunesu acct. These quit working recently. The debug gives the error, "The format of the signature string is valid, but its value is not valid for the shared secret of the destination and for the received identity, credentials, and time. "
I have downloaded Wollamaloo and get the same error. I checked the time on my computer with time.gov and that is right. The shared secret has not changed on our end. Any chance it could change on Apple's end?
I have tried getting in touch with a human via the tech support number but apparently that number no longer services itunesu. At a loss where to turn at this point.

My suggestion is that if you use Apple's time server (time.apple.com), then if Apple has the wrong time, your local time setting will be wrong by an equal amount. It's pretty unlikely that Apple's time server(s) will be off…but if they are, you're covered because the time stamp that you generate locally and the time stamp that Apple generates remotely will derive from the same source, whether or not that source is actually "correct" in an absolute sense, then, won't matter.
You are correct that Woolamaloo uses the local time of your Mac/PC. But if your local machine and your web portal machine time sync from the same time server, then they could be equally "wrong".
Another thing that I mentioned earlier is that all timestamps are measured from UTC or "Greenwich" time. So if your portal server/desktop machine isn't configured correctly for location, this will not be taken into account when your timestamps are generated. For example, I live in Chicago, which is currently under Central Daylight Time in the USofA. This means I'm UTC-5 hours, if memory serves. If I move to, oh, Duke University, but forget to change the locale on my computer, then my computer will continue to think that I'm UTC-5 when I should, in reality, now be UTC-4. So if you find that your timestamps are off by an exact number of hours, then it's a sure bet that your machines aren't setup correctly for their locales. Make sense?

Remote Web Access stopped working

Alright so this is really strange but i have just recently had problems with this. So one day i went to my domain (bought from GoDaddy.com) in order to get access to my remote web access in windows server 2012 essentials. I have had no problems with it
so far.... all ports are forwarded correctly and i have a valid ssl cert. The page displays "Remote Web Access is turned off
To turn on Remote Web Access, you need to have a client computer with Windows Server Connector installed, and then start the Dashboard to enable Remote Web Access."... it was enabled just fine before. I have tried migrating to a free Microsoft domain but
same message appears no matter what. It seems RWA is broken? how do i fix this?

Hi Lambro690,
Based on your description, please refer to the following operations and troubleshoot this issue.
On Windows Server 2012 Essentials, run the Windows Server 2012 Essentials Best Practices Analyzer (BPA). Please check and fix all issue that it can find, then monitor the
result.
Open Dashboard, select Settings option and click Anywhere Access tab. Then click the Repair button. Please check if can help you to find some clues or solve this issue.
Please check port 80, 443 were set up correctly on the router. Please refer to the article:
Troubleshoot Remote Web Access connectivity in Windows Server Essentials
On Windows Server 2012 Essentials, browser the default web site in IIS. Please check what you can find.
By the way, did you run the wizard again to enable the RWA? Will encounter this same issue?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

RV042 stops working during long transmissions

When my RV042 is accessed for long transmissions (svn check out, usually after 20 minutes ) the client receives a message "Gateway not responding, do you want to wait".
When this happens I see the following in the RV042 system log (the first 3 lines of the log below are normal):
Apr 2 17:36:53 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:36:54 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:36:54 2012
Connection Accepted
TCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1
Apr 2 17:37:00 2012
Connection Accepted
UDP 110.33.141.168:500->180.243.235.82:500 on MAC=
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: received Vendor ID payload [RFC 3947]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: received Vendor ID payload [RFC 3947]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [FRAGMENTATION]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [FRAGMENTATION]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [fb1de3cdf341b7ea16b7e5be0855f120]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: ignoring Vendor ID payload [e3a5966a76379fe707228231e5ce8652]
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Apr 2 17:37:00 2012
VPN Log
packet from 110.33.141.168:500: [Tunnel Negotiation Info] <<< Responder Received Main Mode 1st packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: responding to Main Mode
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 2nd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 3rd packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Apr 2 17:37:00 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder send Main Mode 4th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Main Mode 5th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: Peer ID is ID_IPV4_ADDR: '192.168.1.5'
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] >>> Responder Send Main Mode 6th packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] Main Mode Phase 1 SA Established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: sent MR3, ISAKMP SA established
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #100: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 1st packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: esp_ealg_id=3-3,esp_ealg_keylen=0, key_len=192,esp_aalg_id=1-1.
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: esp_ealg_id=3-3,esp_ealg_keylen=0, key_len=192,esp_aalg_id=1-1.
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: responding to Quick Mode
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Inbound SPI value = 28a4a9ab
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Inbound SPI value = 28a4a9ab
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Outbound SPI value = 1cd20e4d
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Outbound SPI value = 1cd20e4d
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] >>> Responder send Quick Mode 2nd packet
Apr 2 17:37:01 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] >>> Responder send Quick Mode 2nd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 3rd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] <<< Responder Received Quick Mode 3rd packet
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel Connected
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel Connected
Apr 2 17:37:02 2012
VPN Log
(qknips3) #101: IPsec SA established {ESP=>0x1cd20e4d <0x28a4a9ab
Apr 2 17:37:02 2012
VPN Log
(qknips3) #98: received Delete SA(0x6ae048ca) payload: deleting IPSEC State #99
Apr 2 17:37:02 2012
VPN Log
(qknips3) #98: received Delete SA(0x6ae048ca) payload: deleting IPSEC State #99

I have upgraded the firmware for the RV042 to the latest.
I have hardware version 3 so the upgrade was effective.
The ping and trace route show the same results when I try from here
TraceRoute to 110.33.141.168 [d110-33-141-168.mas800.nsw.optusnet.com.au]
Hop
(ms)
(ms)
(ms)
     IP Address
Host name
1
1
0
0
     206.123.64.42
2
0
0
0
     64.124.196.225
xe-4-2-0.er2.dfw2.us.above.net
3
1
0
0
     64.125.26.213
xe-1-1-0.cr2.dfw2.us.above.net
4
5
5
5
     64.125.31.122
xe-4-2-0.cr2.iah1.us.above.net
5
39
37
37
     64.125.30.50
xe-0-3-0.cr2.lax112.us.above.net
6
45
45
46
     64.125.26.30
xe-2-1-0.cr2.sjc2.us.above.net
7
45
69
46
     64.125.31.69
xe-0-1-0.mpr2.pao1.us.above.net
8
46
46
46
     64.125.13.6
above-gige.pao.singtel.net
9
53
54
53
     203.208.149.250
10
202
202
203
     203.208.174.190
11
205
208
207
     211.29.125.242
mas2-ge3-0.gw.optusnet.com.au
12
219
215
214
     110.33.141.168
d110-33-141-168.mas800.nsw.optusnet.com.au
The avg ping to 110.33.141.168 is 427 ms
But that has nothing to do with the router of course
Thanks a lot Misty, we will try again

CS5 has stopped working pop up everytime when selecting fonts. details: Problem signature:   Problem Event Name:APPCRASH   Application Name:Illustrator.exe   Application Version:15.1.0.39   Application Timestamp:4d76c9e3   Fault Module Name:CoolType.dll

Stops responding, etc
details
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Illustrator.exe
Application Version:    15.1.0.39
Application Timestamp:    4d76c9e3
Fault Module Name:    CoolType.dll
Fault Module Version:    5.7.83.9418
Fault Module Timestamp:    4c296b69
Exception Code:    c0000005
Exception Offset:    00021ae1
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    8e1b
Additional Information 2:    8e1b636bd3438ac15d03ef1549553b25
Additional Information 3:    1b31
Additional Information 4:    1b316dab8b65bf468124c367b4a50e14

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

Assigned Access stopped working - no longer lets me select an App

Similar Messages

Maybe you are looking for