Assigned the output type with AR also,It is printing in ENGLISH Only.
Hi,
I have written a Z Smartforms and Z print program.
I have used ZRV56TD00(Copied from standard program RV56TD00),Inside it I have submitted the program(Z print Program) for the shipment number for the transaction code VT03N.
It is now printing the form in english well and good.
Now I want the same to work for the ARABIC.
I had done the arabic translation in SE63 and If I run the program It is printing only in English.
When the assigned the output type with AR also,It is printing in ENGLISH Only.
Suitable answers will be rewarded.
Regards
Manohar S
Edited by: Manoj on Jun 17, 2008 4:13 PM
Edited by: Manoj on Jun 17, 2008 4:14 PM
Edited by: Manoj on Jun 17, 2008 4:15 PM
Hi Manoj,
Goto transaction NACE and check wether you have mentioned the language in Mail title and texts for the particular message type.
let me know if you require in more detail.
Regards,
Sharath
Similar Messages
-
Assigning the output type to the shipment number
hello,
can any one tell me how to assign the output type to the shipment number.
Ex: ALTR to all my shipment numbers. By default, its taking other output types.
Thanks in advance.Hello!
Please check which output-types for shipment have been maintained in transaction code VV7x (Output-Condition Records).
Menu path: Logistics -> Sales and Distribution -> Master Data -> Output -> Shipment
- VV71 - Create
- VV72 - Change
- VV73 - Display
Or go to customizing (TCode: SPRO) to verify how they have been maintained:
Menu path: IMG -> Logistics Execution -> Transportation -> Basic Transportation Functions -> Output Control -> Maintain Output Determination for Shipments
Regards. -
Assignment of output type to billing document
I have a billing document for which output type is not assigned.
Now, whenever I am trying to take the print by VF02, it is asking for output type. and i am giving any output type, the error is coming that " No output type is assigned to the billing document".
Please suggest, whether we need to assign the output type to the billing document??Hi Praveen,
<b>You should have a output determination procedure along with the billing type assigned to the output type(for eg: RD00,RD01 etc).Apart from this you should have a valid condition record which you create using VV31</b> in which you can control the key combination by maintaining chosen fields in the condition table which pulls the data as per the access sequence and provide you enough combination(for eg: for a certain sales org and Billing type combination etc )
In the condition record you define the medium,dispatch time and language and not forgetting the output device as well.
Hope this info has been useful.
Rgds,
Aram K. -
Error while trying to assign an output type to medium external send in smar
Hi,
My requirement is to send a smartform through e-mail as PDF attachment.I have made the changes in the print program of the smart form.When I try to assign the output type to the medium external send in vt02n transaction,it is being saved but it is showing the status as 'not processed'.When I check the processing log it is showing 'Please maintain a output device in your user master data'.But I am able to send the mail and open the attachment.When I try to assign the same o/p type to medium special function,this is being successfully processed .Why am I getting error when I try to assign theo/p type to external send?
Regards,
HemaCheck the logic in the entity adapter ENT_Prov_Permitted_Resources.
This adapter is causing problems when you are trying to assign the resource. -
Problem in assign the delivery type to the existing output type
Hi
There is a problem in assinging the existing Output type to the delivery type.
In, NACE i have maintained the output type for the procedure and also through VV21 i have created the condition type with the combination of shipping point/delivery type.
But system automatically not determining the output type when we create the outbound delivery. This output type is to trigger the EDI in terns..
Can any one guide me what are the setting to be done for the same?
Edited by: V. Mariappan on Jul 5, 2009 12:40 PMHi,
Check whether you have maintained the condition records for output for the above combination & also the Print device in the Communication tab & Print immediately settings.
If you haven't maintained the above, do the same & check.
Thanks & Regards, -
Problem with the Output Type and Transaction ME9F
Hi,
I have an Output Type (xyz) and Program (abc).
If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
Printout.
If for ME9F i give the output type ( pqr) then am able to get the Spool and
Printout.
Problem is :---
when am using O/P Type ( xyz ) for ME9F then am abel to process but am
not able to get the spool and not even printout.
I want to know where it can be wrong.
It's a high priority object.
Kindly help me out.
Thanks,
Zia.hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay -
How to assign the output of a function to a text area: a PLSQL challenge
I have a function that returns a PLSQL table of varchar4(4000)
Here is its signature in a package:
create or replace package researcher_request_pk
is
TYPE query_table_type is table of varchar2(4000) index by binary_integer;
FUNCTION RequestSQL(P_RRQ_ID in number) return query_table_type;
end;
I use this to get around the 32k limit on clobs and varchar2 variables
I want to assign the output of the function to a text area. I've tried the following PLSQL in a dynamic action and also as the source attribute of the Text Area but it doesn't populate the text area.
Here is the code i'm using
declare
v_table researcher_request_pk.query_table_type;
begin
v_table:=researcher_request_pk.RequestSQL(:P64_RRQ_ID);
for i in 1..v_table.count loop
htp.prn(v_table(i));
end loop;
end;
Any ideas on the correct syntax to do this?
thanks in advance
PaulPThanks for your reply
The function does populate the PLSQL table with data. e.g. If I place that exact code in a PLSQL region it generates the output on the screen with no problems. The problem is just generating the output into the text area.
I want the text area to display the output of the PLSQL table (-a dynamic select SQL statement) which I then plan to execute to return records.( i.e. I've build my own runtime query builder)
My plan is to allow the user to edit the SQL output first before sending the statement for execution.
Funnily enough I do get the very first word of the first cell appearing, namely 'SELECT' but nothing else. Maybe the "||" that follows has something to do with the rest of it not appearing?? hmmm... will experiment more.
thanks
PaulP -
What are the output type and Tcodes?+
What are the output type and Tcodes?
hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva -
PO Output type with Option 5 External Send (&EKKO-EBELN&)
Dear Friends,
We have come across and interesting issue.
We want PO output to be send to vendor via email and the email subject should be "New Purchase Order <po document no>". To achieve this requirement we have set the Output type NEU --> Mail title and Text as NEW PURCHASE ORDER &EKKO-EBELN&.
When PO is created and before saving the PO user select the option 5 External Send in Message and further go to the communication tab. he can see the 'NEW PURCHASE ORDER &EKKO-EBELN&.' in Cover Page Text.
But the movement user saves the PO, Message --> communication is replaced with 'NEW PURCHASE ORDER".
And finally when the mail is sent with no PO document number and subject as "NEW PURCHASE ORDER".
Has any one has come across this issue before?
Or is there any OSS note for this?
Please Help!!
Sandeepdear sandeep
you can follow below mention steps or reffer OSS
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470
Hope this will help.
reward points if helpful
thanks and regards
ravikant dewangan -
Accessing the output type data in rv60afzz exit
Hi All,
I want to access the output type data in stored in VNAST table of the program SAPLV61B from the user exit. I am doing this using field symbol. But I am not able to get it .
data :it_xnast like vnast OCCURS 20 WITH HEADER LINE,
it_x1nast like vnast OCCURS 20 WITH HEADER LINE.
field-symbols :
<Fs1> type ZSDTT_VNAST,<Fs2> type ZSDTT_VNAST .
data: wa_xnast type vnast, wa_x1nast type vnast.
assign ('(SAPLV61B)XNAST[]') TO <fs2>.
assign ('(SAPLV61B)VNAST[]') TO <fs1>.
I have written the same code for the order user exit. There the field symbol is getting assigned with the internal table. But in case of this user exit, the sy-subrc is coming 4.
Or is there any other user exit, I can make use of this for such requirement?
Thanks in advance,
Rgds.
Madhuri
Edited by: madhuri sonawane on Nov 30, 2009 4:32 PMHi Nishant,
I think you have not understood my problem. I want to access the internal table where the output types data gets stored at run time for the particular invoice. The code I have written is working fine in the order's user exit. That means I can access the data in order. But in the case of billing , even if that program SAPLV61B is getting called before the execution of this user exit, no data is coming in the field symbol FS1 neither and not even in FS2. I want to know is there any other user exit, where I can access the run time data of the output types attached to that invoice. or is there any other program from where I can access the output type data in the same above user exit.
Rgds,
Madhuri -
Hiding the Output types for ME22n transaction
Hi,
We have a requirement in removing the output types from the message tab of ME22n trasaction.we have defined 2 output types for the same NEU and ZFES a special function,we need to check if the PO is already assigned with ZFES then the NEU output types should not be displayed over there in messgaes tab.
Any pointers will be really helpful.
Thanks,
JayUse EXIT function VN000001 for output selection
write down your code as per your need .
thanks
abhishek -
Assign New Output type to billing Document
Hello,
I have created a new output type.I wish to assign this output type to my billing document through VF02(Manually). But when clicking on the matchcode to select the newly created Output type, it doesnt exist. And when I try to write it and save, i get an error message: "Output XXXX is not defined"
I double checked in Tcode NACE and the configuration seems ok; the program, smartform, routines and medium was correctly filled in.
Could you guys please help me on this? What is to be done ?
Thanks in advance.Hi,
You created your "output type " for aplication V3 (billing) ?
Also, you have to create a "procedure" (see button in NACE) and provide your output type for procedure V10000 (billing).
(the F4 is selected from T683S -> procedures)
Best regards,
Leandro Mengue -
Is there a way to change the output type for Email Remittance Program?
Hello,
We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the
email which we receive looks like a regular email I mean with a normal text . Is there a way to get the output in different type like excel,attachment,pdf.
Any inputs would be highly appreciated.
Thanks,
SushmaCurrently there is a bug raised
Bug 8208646 : R12 UNABLE TO SEND SEPARATE REMITTANCE ADVICE AS EMAIL ATTACHMENT IN PDF.
If you want to customize this process you need to create data definition,new rtf template and bursting program to send pdf as attachment. -
Update LIKP table while saving the output type in VT02N transaction
Hi All,
I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.This could be a result of one of the following reasons:
1: Incorrect smart form/routine assigned in the output configuration (NACE)
2: Serial number range of the delivery expired
3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
Hope this is helpful
Manish -
No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)
I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.
Maybe you are looking for
-
How do I create XML output as string without the ?xml ? tag
I need to create xml from a database query result. I am able to do this but it includes the <?xml ?> header tag. I need to create the xml without the header tag <?xml ?>. Please advise. Here is my source: package sql_test; import javax.xml.parsers.Do
-
ABAP system copy on 6.40 system
Hi, I am trying to complete a system copy using the SAP Tools for MS SQL. I ran the install from the Master CD, restored the backup and then started the sapinst from Tools for MSSQL. On step 5 creating the stored procedures, it dies on 143 (sap_mon
-
the recent version of firefox is not supported on MyMathLab. How can I return to an older version of firefox?
-
Poster edges and oil paint filters, seem to be gone in cc. I use them on CS6. Where are they
I use several filters extensively in CS6 on MAC. I have downloaded a trial of CC 2014. It looks pretty much the same as CS^ but when I looked for the Poster edges and oil paint filters I can not find them. Anybody out there know where they might be.
-
Matl. Statistics group not found.....
Hi all, I have created same material in production and development, but in development in Sales Ord. 2 View, Matl. Statistics Group filed not showing (only 3 fields showing), where as in production it is showing all fields. How to activate that Matl.