Assigned view BTPARTNER/Partner in view area Root could not be loaded

Hi All,
After enhancing the BTPARTNER/Partner view in the BTPARTNER component getting below dump.
Assigned view BTPARTNER/Partner in view area Root could not be loaded.
Assigned view BTPARTNER/Partner in view area Root could not be loaded
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_BSP_WD_INV_VA_ASSIGNMENT", which was raised in the
program "CL_BSP_WD_VIEW_CONTROLLER=====CP",
specifically in line 116 of the (include) program
"CL_BSP_WD_VIEW_CONTROLLER=====CM001".
Please help me how to solve this issue.
Thanks,
P.Anitha

Hi Anitha,
Can you try activating all services under the node default_host -> sap -> bc -> bsp -> sap in SICF?
Regards,
Aditya

Similar Messages

After upgrade linux-firmware (20100606-1) lvm root will not be loaded

Hello,
I'm a newbie, although arch has been running for 2 years now on my server.
after I've upgraded the system today with linux-firmware (20100606-1) (from kernel26-firmware(2.6.33.4-1), coreutils (8.5-2), dri2proto (2.3-1) udev (157-1),initscripts (2010.06-2) and mkinitcpio (0.6.6-1), I did not see any errors and rebooted.
The result was an error that my LVM root could not be created.
I have a /boot that is outside lvm and then my root and home etc are in the lvm.
When looking closer at the creation of the kernel26.img I noticed that the usual usb, keymap and lvm2 were not created.
Why he did not make it now like before I do not know (maybe because of the upgrade of the mkinicpio?)
I've booted my system with sysresccd and edited the /etc/mkinitcpio.conf to include usb, keymap and lvm2 (in the order it normally is created)
Now the problem is that I do not have a clue how to solve how to build the new image, since I can not boot into my system to run the command:
/sbin/mkinitcpio -k 2.6.34-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
I've tried it with the lvm root and my boot mounted and then run an adjusted command but it does not work because it needs stuff from /sbin (like gen_init_cpio.
I've tried starting up from the arch2010.05 CD but after lvmdiskscan I get an error that the device-mapper driver is missing in the kernel.
(I've did a "modprobe md_mod" and "modeprobe -l | grep md-mod" shows kernel/drivers/md/md-mod.ko so I figure it is loaded.
How can I solve this?
Last edited by ruy_lopez (2010-06-21 19:49:10)

This is a part of the error message that is still remaining:
:: LRunning Hook [keymap]
:: Loading keymap... done.
:: Running Hook [lvm2]
Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes...
No volume groups found
Waiting 10 seconds for device /dev/mapper/lvmroot ...
root device '/dev/mapper/lvmroot' doesn't exist.\Attempting to creat it.
ERROR: Unable to determine major/minor number of root device '/dev/mapper/lvmroot'.
You are being dropped to a recovery shell.
modprobe - l
kernel/drivers/md/dm-region-hash.ko
kernel/drivers/md/dm-log.ko
kernel/drivers/md/dm-snapshot.ko
kernel/drivers/md/dm-mod.ko
kernel/drivers/md/dm-mirror.ko
kernel/fs/reiserfs/reiserfs.ko
kernel/fs/jbd2/jbd2.ko
kernel/fs/jbd/jbd.ko
kernel/fs/ext3/ext3.ko
kernel/fs/ext2/ext2.ko
kernel/fs/ntfs/ntfs.ko
kernel/fs/mbcache.ko
kernel/fs/udf/udf.ko
kernel/fs/ext4/ext4.ko
kernel/lib/crc-itu-t.ko
kernel/lib/crc16.ko
So dm-mod is loaded and it seems he is processing the hook but he can not find the volumegroups.
With the rescue disk I can mount them so they are all right.
where should I look now? Any hints.
Last edited by ruy_lopez (2010-06-21 22:41:45)

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?

Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly.

IDoc error "customer and sales area : GR could not be uniquely determined"

Hi All,
While posting some IDocs i am getting error customer and sales area : GR could not be uniquely determined even when entries are available in EDSDC table.
Please assist.

Double check your entries. Once I ended up even sending a message to SAP and turned out there was a simple typo in the table.
Also since you're saying "some IDocs" - check how exactly they are different from those that don't have this error.

When searching the calendar in list view, appointments erlier than a few years could not be found after search. en appointment from 1974 could not be found although it appears in the list.

When searching the calendar in list view, en appointmet erlier than a few years could not be find although the appointmet is listed in the List wiew ???,
An appointment from 1974 could not be found, in SEARCH MODE, although it appears in the calendar.

Pardon me for a moment while I (politely) rant in your general direction...
This type of response is not just unhelpful—it is the antithesis of helpful.
This is a support forum. Its purpose is helping to resolve people's problems. Sometimes those problems are going to require long explanations or lots of information. That either comes out in the original post or over the course of several back-and-forth replies; the former produces long posts but takes less time overall than the latter.
If you don't have the patience to read through a long post, then just move on. Posting a "too long, didn't read" comment adds nothing beneficial to anyone. All it does is reveal that the person who made that comment thinks it's important to tell everyone that their attention span is too short for anything longer than a tweet.
Yes, my post was long. Had you read it, you might have understood why it's so long. I'm trying to provide information that people searching these forums about this problem might find helpful. I did this because when I searched for info on this problem, I found lots of people with a similar problem, but no answers that went beyond "restore from backup". Since that advice wasn't the solution for me, I decided that more information might prompt someone with more knowledge and access than I have to investigate. Since you couldn't be bothered to read it, you clearly aren't the kind of person whose attention I was hoping to catch.
Certainly I could have made the post shorter, but I think putting it into a narrative like this makes it easier to follow and provides a context that a terse recitation of bare facts does not. If you disagree, that's your prerogative, but please don't waste everyone else's time by posting a comment just to say that you didn't read it.
I find it appalling that someone who's able to reach Level 6 on these support forums would post a "tldr" comment. That does not reflect positively on you or these forums.
End of rant.

TS1702 Twice now rented and downloaded movie to view on flights. When I tried to view on the plane i got a message that it could not be loaded. But when I got to destination, it was okay. Any ideas.

Twice now rented and downloaded movies from iTunes Store to view on flight. Both times it told me that it could not load. Yet worked okay once I was at destination. Any ideas?
Thanks

This is in the iPad's Videos app ? If you turn Settings > Airplane Mode 'on' are you able to watch them in the Videos app now ?

Text Area Dialog Could not insert a new line?

Hi,
I've just downloaded a new Oracle SQL Developer (formerly known as project raptor) and have tested-drive this software. I found some dissappointed thing there:
- I would like to insert a long string (several paragraphs) in the data grid editor directly and after I commit the connection, sqldeveloper stripped all my new line (\n)! Is this normal or I've done a mistake here? The datatype of my column is varchar2. I've also tried if the datatype is clob, but the result is the same.
- I dream someday sqldeveloper's data grid editor can show calendar dialog if the column type is DATE just like sqldetective does.
thanks for any suggestion
regrads,
fox

- I would like to insert a long string (several
paragraphs) in the data grid editor directly and
after I commit the connection, sqldeveloper stripped
all my new line (\n)! Is this normal or I've done a
mistake here? The datatype of my column is varchar2.
I've also tried if the datatype is clob, but the
result is the same.Yes, that's a bug. The fix would come soon with the first patch release.
- I dream someday sqldeveloper's data grid editor
can show calendar dialog if the column type is DATE
just like sqldetective does.Sure.

HT201210 Both my iphone and ipad are saying could not backup etc, delete etc, will not let me upgrade to 6.0 any ideas please?

Tried to upgrade both devices but a message comes back saying backup corrupt etc, any ideas please?

Select a device in iTunes and click the tabs across top to sync what you want.
Do the same for the other device.

Crystal Report Windows Forms Viewer problems - table could not be found

Hi,
I installed Crystal Report Viewer in SAP Business One 2007. All the while, I can run the reports without any problem. but when I loaded some of the new report, it gives me the following error message:
the caption says: "Crystal Reports Windows Forms Viewer"
the message says: "The table 'paymentVoucher' could not be found.
Error in file C:\...paymentVoucher.rpt. The table could not be found."
By the way, I can run the report in another workstation.
Any help or ideas of why this is happening or how to solve this will be greatly appreciated.
Thanks in advance.

The report is not created by me. I just help others to transfer the report from one workstation to another workstation. PaymentVoucher is a view in the database and it is being put at a workstation that can be shared by everyone.
I've go through other forums and found out that it might be permission issues and now managed to solve the problem already.
Thanks everyone for the advice.

How can i show sales order details for specific partner in view

Hi All,
My Requirement is that I want to display the sales order id,sataus,amount in sales order assignment block in Customer FACTSHEET. I created a new componnet and new view for Sales Order View using BTQRSlsOrd BOL Entity in ONEORDER I want to diplay sales order id ,status ,amount for specifc business partner which i selected from Account Tab in WEB UI.How can i bind my ( view or context node or context ) so that it shows details of sales order for specific business partner.
Thanks in Advance.......
Vishwas Sahu

Hi Vishwas
I hope the following link helps you in setting up the sales order in account fact sheet:
Add Sales Order to Account Factsheet
If you are on CRM 2007 SP03 then you might need the following note:
Note 1165224 - Search result is not showing up in IC account factsheet.
Regards
Rupesh

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone esle sends me I can't view the images. Thye are all blank white squa

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

The dark bar is caused by the option "Show metadata below image".
Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
Regards
Léonie

Why in my Smart View application to watching TV are only chinese words? Only china language. There is no English on iPad Air

I've got a big problem. I want wach TV on my iPad Air, but i can't. Please help me. In application "Smart View" by Samsung CO Ltd. are only chinese symbols. Only china. Only that language. I can't set English. It's problem not only on iPad Air, but on all iOS 7.0.4. My friend who don't update iOS 6, iPad 3, watch and use this application. When I wrote to SAMSUNG, they told me that is my iPad software, only on their tablets that application works good. I like Apple, so help me with this.

I think you will have to use some other app. Only Samsung can fix the problem with theirs.

Assigned view BTPARTNER/Partner in view area Root could not be loaded

Similar Messages

Maybe you are looking for