Assigning 2 different license to one database

Hi Guys,
Is it possible to assign to different license to one database to SAP Business One 8.8 PL20?
Regards,
Michael

Hi Michael,
Why do you need assigning 2 different license to one database? I don't think that is the right use of the license even if it is possible.
Thanks,
Gordon

Similar Messages

Copy few test assignment with User from one database instance to another

Hi,
I have OTL ,Payroll and HRMS system. I want to Copy few test assignment with User(Few FND Users) from one database instance to another .
Source: DEV Instance
OTL users to enter their Time sheet
OTL is intergated with HRMS to pickup Employee information
Existing business users are integrated with Employee assignment etc tables to pickup person_id
Target: Want to copy few test OTL users from ONE instance to another. Bringing FND_User is easy but EMPLOYEE_ID, PERSON_PART_ID will not come during FNDLOADER .
How to bring all information from one instance to another instance? Please advice.
thanks .

Dear,
Try using HRMS configuration workbench. For this you might require support from your DBA for configuring the same. Once configured, you can move the items you want.
Regards,
Kathan

Assigning Different database governance limit for on demand versus scheduled report in BOEXI release 1

Post Author: Lucia Chan
CA Forum: WebIntelligence Reporting
I'm trying to use connection overrides for universe to assign different CPU processing limit for different group members on the database side. For those with low CPU limit setting, they would need to schedule their reports. I'm trying to find out if there is any way for the database to know if the report is on demand or scheduled. If scheduled, there should be no limit. I did a preliminary test with both on demand and scheduled WebIntelligence reports and both passed the wiReportServer.exe instead of wiJobServer.exe on the database side as AppName. Does anyone have any suggestion to look at that can differentiate the two?
Thank you.
Lucia Chan

All the mesages are dated "Aug 13" which is quite a few months ago ! I see no recent messages.
You have two CREATE CONTROLFILE calls and one alter database character set INTERNAL_CONVERT ZHS16GBK call.
Were these part of a Database Creation using DBCA (The Database Creation Assistant) ?
Hemant K Chitale

Assign multiple internal parts (materials of different plants) to one MPN

HI
I have a requirement to assign multiple internal parts (materials of different plants) to one manufacture part number.
but in HERS material type it allows to assign to only one .
can any body suggest how can I do this.
Sreeram

You can do that.
1:Assign the new plant to the sales org / distribution channel - Enterprise structure
2:DO the shipping point determination for the new plant.
3:Extend the materials to the new plant.
4:If there is intercompnay process, please check "Assignmnet of organizational units to plants" in navigation SD - Billing - Intercompany billing.
5: Check if there are any pricing records, output records....et cwhich has Plant as parameters. if yes maintain the entries for the new plant.
These are the things I could think of.
Before deleting the existing plants, make sure there are no open documents existing for these plants, else system will not allow to delete.
Regards
Sai
Edited by: Sai on Jun 1, 2010 4:19 PM

Two database with the same sid but different ORACLE_HOME on one host

two database with the same sid but different
ORACLE_HOME on one host,and if configure them with
two differnt lisnter staticaclly,this abosultely work
because in the lisnter.ora we must provice
ORACLE_HOME variable,with this ORACLE_HOME the client
can differentiate which database to connect,but if
use dynamically register feature,how can the client
tell which database to connect?

Also note that this type of configurtion may not be supported.
Just because a given configuration works in certain given conditions does not mean that it would be supported.
If this setup is for a configuration that has any value, please also Contact Oracle Support to get their inputs on what you are trying to accomplish.

Apps for different clients with one creative cloud license

Can I publish apps for different clients with one single edition license on creative cloud?

Well, "should" is about as good as it gets, no one is going to enforce that, and it's certainly making me think very very hard about whether to bother with a pro licence again in August!
And yes I'm very much aware of the few advantages of the Pro Licence, I do need to see some much bigger differentiators to justify the extra cost though!
Just putting cards on the table :-)
Alistair

I need to re-assign a license to a different user

Hi,
I am the administrator for our CC office account and I have a staff member that has recently left us but her license technically does not expire until March next year. I have a new member of staff, can I re-assign that license to her instead rather than having to buy a new one and leave the other one unused?
Any advice is much appreciated.

Hello Lmcmozzie,
If you want more information regarding your request, please follow the link below :
Creative Cloud Help | Manage your Creative Cloud for teams membership
Let us know if you have any questions.
Thanks.
Arnaud.

Different ways to Transfer data from one database to another database

Hi all,
What are the ways to transfer data from one database to another database. With the following options, i Can transfer data as far as i know. Please
correct me if i am wrong or tell me if there is any other options are available.
1) Create database link/connection string and using this string and COPY command, we can transfer data.
2) By using Export and Import utilities.
I told first one to my interviewer, he told, its strange, by using, COPY command also can we transfer data ? As far as i know, we can transfer data. Am i right ?
Thanks in advance,
Pal

transfer data from one database to another database.You mean store the data of one to another?
1) Create database link/connection string and using this string and COPY command, we can transfer data.every SELECT on a DB-link is transfering data. And you can have all kind of transfers and store on the e.g CTAS of materialized views or.... the SQL*PLUS COPY :
The COPY command is not being enhanced to handle datatypes or features introduced with, or after Oracle8i. The COPY command is likely to be made obsolete in a future release.
But there are many others. Check for ORACLE Streams, and the "COPY" your interviewer was mentioning is about the operating file system COPY right? That's transportable tablespaces.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces013.htm#ADMIN11403
-- andy

Running SAP 8.8 with 2 different License Servers on different machines

Hi all!
We have a problem using SAP 8.8 with more than 1 license server.
Here is the situation:
i would like to use a local license server and a local sbo-common with some databases. additional we have an other server with a license server and sbo-common with databases. the licenses are different from each other. the local license has a license for the manager, the license at the other server not. instead it has licenses for other users.
So i would like to work on both servers from my pc. furthermore, i would like to run 2 SAP applications: one connected to my local license server and database, the other connected to the non local server and database.
In 2007 this was possible!!! It seems that the license management works different in SAP 8.8. It should be possible that SAP reminds which server and database belongs to which licence server. But this isn't possible!
may you have same expierences...
thanks..
matthias

Hi JSR
you are right, but there seems to be a bug in licences mechanism. Here a quote from my SAP message:
Szenario:
Start B1 Client, connect to server A - everything OK
Start B1 Clinet connect to sever B - no licence, because in B1 ist Licence Server A.
Change licence server to B in B1
Restart Client, connect to server B, everything OK
Start Client, connect to server A. No licence.
And additional: In SBO-COMMON on sever A in table SLIC the column LSRV is: SERVER B. Thats in my opinion an bug.
What do you mean?
Thanks in advance for some tip's oder help.
Andreas

Can I have multiple different vlans in one Single Mode Transparent Firewall

Hi,
I am about configuring Data Center FW (ver 9.2) to protect multi tier Servers Farm; Web, Applications & Data Base. There is a requirement to set the FW in Transparent Mode, while the license is the base 2-contexts, only.
I wonder if One Single Transparent Context, with different bridge-groups, one for each vlan is a workable solution. I have pasted the configuration of the FW, it may help in understanding the setup.
======
firewall transparent
names
interface TenGigabitEthernet0/8
description To Nx7K-1 Port-8
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet0/9
description Nx7K-1 Port-9
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet1/8
description Nx7K-2 Port-8
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface TenGigabitEthernet1/9
description Nx7K-2 Port-9
channel-group 9 mode passive
no shutdown
no nameif
no security-level
interface BVI1
desc Services Zone
ip address x.x.41.250 255.255.255.0
interface BVI2
description WEB-APPS Zone
ip address x.x.42.250 255.255.255.0
interface BVI3
desc Oracle management
ip address x.x.43.250 255.255.255.0
interface BVI4
descr Oracle DB
ip address x.x.44.250 255.255.255.0
interface Port-channel9
description ECLB Trunk to NX7Ks
duplex full
port-channel load-balance src-dst-ip-port
no nameif
no security-level
switchport mode trunk
switchport trunk allowed vlan 41-44,141-144
interface Port-channel9.41
vlan 41
nameif Services-Outside
bridge-group 1
security-level 0
interface Port-channel9.141
description Services-Inside
vlan 141
nameif Services-Inside
bridge-group 1
security-level 100
interface Port-channel9.42
description WEB_APPS-Outside
vlan 42
nameif WEB_APPS-Outside
bridge-group 2
security-level 0
interface Port-channel9.142
description WEB_APPS-Inside
vlan 142
nameif WEB_APPS-Inside
bridge-group 2
security-level 100
interface Port-channel9.43
desc Oracle management
vlan 43
nameif Oracle_Mgmt-Outside
bridge-group 3
security-level 0
interface Port-channel9.143
description Oracle management Inside
vlan 143
nameif Oracle_Mgmt_Inside
bridge-group 3
security-level 100
interface Port-channel9.44
desc Oracle DB
vlan 44
nameif Oracle_DB_Outside
bridge-group 3
security-level 0
interface Port-channel9.144
description Oracle DB Inside
vlan 144
nameif Oracle_DB_Inside
bridge-group 4
security-level 100

it is possible but it is not scaleable. If I remember correctly you can only have a maximum of 8 BVI interfaces...so this means you can only have 8 subnets going across the ASA. You would also need seperate VLANs for the inside interface and the outside interface since you can not configure two interfaces to be in the same VLAN, and then assign these interfaces to the appropriate BVI group.
Please remember to select a correct answer and rate helpful posts

How can I consolidate all photos from different users on one computer?

We just enable one computer to be the "Family" computer. I want to be able to consolidate all photos from the different users into one location. That way no matter wich user is login they can see and browse all the family photos. How can I do that? Do I need and external drive?
Thanks in advance?
MoMa

Move the iPhoto Library to the Users/Shared folder, or you can use an external disk formatted Mac OS Extended (Journaled).
Merge the Libraries as Larry says, with the paid version of Library Manager.
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Each account will have full access to the library, in fact, each account will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?

I have two Creative Cloud accounts, occurred by accident, I wish to merge them and have all my details and licenses under one account, how do I do that?
This is due to the different changes Adobe has gone through and unfortunately I used different emails at certain times.

Under one Adobe ID you can have one CC only,if by accident you have purchased two CC under one account, it needs to be cancelled & refunded, please contact Adobe Support at
http://adobe.ly/yxj0t6
Regards
Rajshree

How to move only subset of data from one database to another?

Both source & destination are Oracle11g databases.
The requirement details are as below,
1) The database contains static as well as transactional data for telecom domain.
2) We have to move region-wise data from one database to another.
3) There are around 10 regions.
4) The region wise data extraction from source db is based on around 40 to 50 tables. Rest of the tables contains
static data & it will not change.
5) The volume is around 1 million subscribers per region.
6) The migration is required because
a) The client is upgrading its base product which uses this database
b) There is a change in structure of static tables
c) Hardware upgrade
d) The client want to start with single region on new database & rest of the regions will be operated from old
database.
7) Keep execution time to very minimum.
I am thinking to have solution as below,
1) Create destination database with upgraded db structure (as mentioned in 6b)
2) Create database links to access source db in destination db.
3) Write SQL queries to fetch data from all the respective tables for a specific region
4) Write separate PL/SQL blocks for each table to fetch data from source db & insert into respective table in
destination db
a) Use FOR ALL & bulk collect to improve the performance
b) Divide table data into multiple chunks & execute parallel batches (around 10) to insert the data
5) Validate pre & post counts to verify the success of migration
Is there any other better way?
Regards,
Sandeep

How to move only subset of data from a partiular table by using transportable tablespace?
E.g. SUB table using SMP_SUB tablespace contains subscriber data in source database.
The indexes defined on SUB table are under SMP_IDX_SUB tablespace
The subscribers data can be categorized by different regions, say region_id column. Then how to move data & indexes of SUB table from source db to destination db?
any specific example would be helpful.

How to create a variance on data that exists iIn only one database column

How to create a variance on data that exists iIn only one database column?
I'm trying to create a calculation to show the difference between the budgets for two different years in a Discoverer crosstab query.
I'm using the lag function to repeat the value of a column for the current year and the year before.

Lag and lead seems to be the only choice and they work excellent. Checkout the new 10g Database features. There is new SQL modal clause which might give additional and powerful analytics but in this case lag and lead should be sufficient.
regards
http://www.infocaptor.com/workbook-dump.php

Forced to remap one database object at a time

Our application exposes a set of data objects (views) for external reporting. Field/row level data security conditions are built into the view definitions. Different access levels are segmented by schema names and in order to enable report reuse object names are identical between schemas.
Users granted schema rights based on their access level.
For example, user A is granted access only to the schema X which contains View1, View2, etc. while user B is granted access only to the schema Y which also contains View1, View2, etc.
User A can reuse report created by user B (since object names are identical), however s/he cannot do it without first changing the data source location (since their access levels and therefore schema names are different).
However, "Set Datasource Location" dialog (see sample screenshot below) does not allow one-click schema remapping. "Current Data Source" hierarchy does not directly expose schema name (it is listed as an "Owner" property of the individual table/view object) which forces user to remap one database object at a time by expanding top and bottom trees, highlighting matching objects and clicking "Update" button.
Our question is: are there any menu items/settings or any other facilities in Crystal Report that would allow us to make re-mapping process less time-consuming?

Hi Len,
No, bottom line is the designer is used to "finalize" the report. It's not designed to be use this way. What I suggest you do is create an application that can set location/schema at view time to that person logging in. This way it's all done in the back end and relatively easy to do using one of our SDK's.
Depending on what development tool and Report engine you use depends on which forum to post your question to. SAP will not create the application for you so you will need to get a developer involved.
Thank you
Don
Senior Technical Assurance Engineer
Developer Support Team
Business Objects, an SAP Company

Assigning 2 different license to one database

Similar Messages

Maybe you are looking for