Assigning a range to manually change the discount

hi gurus
i have a question regarding changing the discount % manually .. i would like to set a default discount % as 2% for a material .. and during the order i would like to make it flexible so that it can be choosen from 1.8% to 2.4% .could some one please help me with this configuration idea.
thankyou very much
bj

Maintain a condition record with 2% for that condition type. In the condition record mainatain the upper limit as 2.4% and lower limit as 1.8%. Ofcourse condition type configuration should allow manual change i.e. maintain no limitations or manual changes has priority in the condition type.
Regards,
GSL.

Similar Messages

  • My album artwork is scrambled and manually changing the artwork does not seem to keep the right artwork with the songs! Any suggestions?

    I manually re-synced my ipod with all of my music because I had typed in a bunch of names where my library had previously said track#/unknown album, and when I was done syncing, a good percentage of the album art was scrambled.  When I try to manually change the artwork on the inappropriately tagged albums or delete and re-sync the album, it does not keep the artwork that I assign to it or the correct artwork that is associated with it in itunes.  Is there anything I can do to fix this?

    It seems like I've seen this... I think you should un-sync all music (in iTunes) hit Apply and then resync it all back on.

  • How can I manually change the height of the "Type ...

    Hi all
    Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions. 
    First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
    And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
    Regards

    There is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
    There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link.

  • Unable to manually change the amount for condition type PB00

    Hi Gurus,
    My client is using ECC5.0.
    Here when I try to change the amount for condition type PB00 using transaction ME22N, I am not able to change the value. I donu2019t get any error, but as soon as I change the value and press Enter the system replaces my entered value with the original value.
    Confusing part is that I am able to change the amount of condition price PB00 manually using transaction ME22. I donu2019t have any such problems there.
    Also I am able to manually change the amount of condition type PBXX using ME22N.
    Only in the case of PB00, if I use ME22N to manually update the amount I am not able to change it.
    Kindly help me, to find a reason as to why this could be happening, and correcting if possible?
    Thanks in advance,
    Imran

    Hello Imram,
    The purpose of maintaining 2 condition types  ie PB00 and PBXX in  a pricing procedure is that PB00 is automatic gross price determination and PBXX is manually giving gross price.
    If you go to T.Code : M/06 and check the condition types, you can see that PB00 will be having an access sequence but not PBXX.
    So if you have to manually give the gross price, you have to use PBXX.
    Regards

  • How to manually change the thumbnail images of the new tab page (without using addons)?

    I wanted to customize the images displayed on the thumbnails on the New Tab Page. I tried using the addon "New Tab Tools" to do so and it worked, for a while. Now a bug seems to have affected it (it is not displaying any thumbnails, so I uninstalled it). So I want to try another approach. I want to MANUALLY change the images for each of the thumbnail on the new tab page (of course, the thumbnails are 'pinned').
    (I read some other articles related to thumbnails, specifically about DELETING them, and it asked me to open the Firefox Profile Folder, and in there, delete the thumbnails folder. I thought I could simply change the images stored in it instead of deleting them, but there is NO thumbnails folder in the Firefox profile folder (I accessed the profile folder thru the troubleshooting information section in the help menu). So where is this thumbnails folder after all?)
    So, how can I do it?
    Thanks in advance.

    I note you are using Icedragon 26. Not sure I have come across that before.
    I guess they provide their own support, as they are apparently offering something based on an outdated and unsupported Firefox26. I see their forum has threads on Icedragon if you search for them, but at a quick glance I see no specific topic
    *https://forums.comodo.com <br /> & https://forums.comodo.com/index.php?action=search2
    You could always install an official and up to date Firefox 29
    * See [[How to download and install Firefox on Windows]]
    * Download from http://www.mozilla.org/en-US/firefox/all/
    You may note the New Tabs page may be subject to a few changes over coming versions of Firefox it is apparently being improved. Firefox itself as Fx29 is also slightly changed from Fx26
    * [[Learn more about the design of the new Firefox]]

  • How to manually change the material staging date

    Hi All,
    Please help me to manually change the material staging date in MF60?....
    Problem iam facing is planned order created for 30.06.2011, but when i do staging today it is not staging due to period for july not openned...
    so I manually planned to change the material staging date in MF60...
    Please help me on this...
    Thanks,
    Manikandan.P

    Hi
    Please find the code below for changoing the status in the delivery  and the standard program for updating the status  RVDELSTA
    SELECT SINGLE * from vbfa  where VBTYP_N = 'U' and vbelv = ' '.
    if sy-subrc = 0.
    UPDATE  vbfa  SET PLMIN = ' ' where vbelv = ' '  and vbtyp_n = 'U'.
    endif.
    please go through the bote  445763   if the  problem is in inter company billing proforma
    Regards
    Damu

  • F110 Configaration - Manually change the payment method.

    Hi Experts ,
    Below is my requirement
    In Txn FBZP.
    1. Use 'Payment method in country' to create a new payment method 'P' as copy of
        payment method 'C'.
    2. Use 'Payment method in company code' to add method 'P' to 3010 ( Company
         code). The only difference between 'C' and 'P'  should  be the SAPScript check
         form.
    3. Create a proposal with payment method 'C'.  in Txn F110, Manually change the
        payment method to 'P'.
    Here my question is how to change the payment method from "C" to "P" manually.
    Thnx & Regds ,
    Rajasekhar.P

    Hi
    Run the Proposal...after that go to the Edit proposal and using the reallocate button and change payment method manually..
    VVR

  • When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order.  Can this be fixed without manually changing the cd?

    When I burned an album that had pictures from 3 cameras that I rearranged the cd came out in camera order not my rearranged order.  Can this be fixed without manually changing the cd?

    No.
    How did you arrange the shots in iPhoto? In an album, manually?
    Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.
    Regards
    TD

  • How do I manually change the genre or track name

    I'm new here, so forgive me if this is easily done. I would like to know how to manually change a song's track name, or genre in iTunes. If i feel like a song is more appropriately labeled "pop" vs "rock" can I change the label? Any help would be greatly appreciated. Also, i'd like to be able to do the same with track names. Thanks.

    Right click on the track you want to change. Choose Get Info and then the Info Tab. You can change the song name, artist, genre etc. in there.
    You can also update multiple items, however beforehand you sort your tracks into the order you want, say for instance by Artist. Click on the first track you want to change, hold down the shift key and click on the last you want to change and all the tracks in between will be selected. After that it's right click etc as above.
    You'll get a lot more on using iTunes here: http://www.apple.com/support/ipod101/tunes/ Lesson two includes changing track information.

  • Can we manually change the status of request which is already approved?

    Hi,
    we are using standard Record Working Time and approal  ESS MSS Application.
    can we change the status of request which is approved     to      not approved or released for approval?
    (in our case,  request released for approval is displayed on weekely basis in approval page and
    on review page (approval) we have number of hours recorded for particular day in that week is displayed.)
    the problem we are facing is,
    user submitted  data for a week and manager approved it.
    but now we have to change the data entered for that week, only for a particular day and submit it again for approval.
    we have changed the data for that particular day  using HR-TSADMN. and submited it again for apparoval.
    but this time only the record (particular day) which has been changed is shown in the approval review page of approval iview MSS.
    but our client needs data of all the days in that week displayed.
    can we get the approved + edited data for the week displayed on the review page of approval??
    if can't, then if we change the status of the approved data for that particular week then the user can again submit the data for that week and data of all the days in that week will be displayed on the review page for approval.
    plz help me.
    Edited by: madhu1011 on Nov 30, 2011 2:23 PM

    to change the status by user, he can modify the hours in the application and resubmit
    For administrator purposes, you should cats_appr_lite, you can reject the all time and do it,
    Do not make any changes directly to CATSDB< it might cause inconsistency
    So better use standard transaction like cats_appr_lite or cats_da

  • My laptop requires me to reboot after i manually change the ip address settings

    Hi guys not sure wat could be causing this, I have a lap that i run at home that has a static ip address, my internet conn is dhcp enabled, when i connect to the internet i dont have a problem.
    When i change my ip address to a static ip it requires me to reboot, this isnt normal as  i used to use a T60 laptop and never had issues with my ethernet connections and switching between the dhcp and a static ip address.
    Please advise.
    Regards.

    IP addresses must be unique.  Making your printer have the same IP as your PC or your router will cause a mess.
    On the front of the printer: Setup > Network > Restore Network Defaults.  Now let's set a static IP address for the printer in this manner:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Manually change the FROM field in an Response file

    Hi everyone,
    I have a question about the generated responses file from an acrobat form.  I can't use the usual E-mail method because apparently the Installed version of Reader that my companies IT department puts out blocks the use of it, people don't see the submit button.
    So I set it up in LiveCycle so that a form gets E-mailed to me when a user hit submit.  However when does this way, the FROM field come imports in as Anonymous User when I manually import it.
    Is the any way to edit this?  I don't need it to know who sent it, I know the method I'm using doesn't support this.  However I am never adding more than one at a time.  Is there any way I can manually just edit this and change it to the name of the sender?
    Thanks

    Thanks.  I will try there as well.  However, even though I created the form using LiveCycle, the responses are still being collected in Acrobat and the response file I am trying to modify is Acrobat as well.

  • I have just upgraded my 2 apple computers to OX Lion and my macbook pro is having ip address issues. I have manually changed the ip address, renewed lease which works but everytime I switch on it does not connect to wi fi until I edit the ip address.

    I recently upgraded to OX Lion and have an ipod, ipad, iphone and other apple mac computer on the network besides my macbook pro.
    Since the upgrade I am having issues with my ip address. I have edited this number under renew lease, taken it to a manual edit and on any of these occassions found an address which allows the computer to go on wi fi.
    However everytime I use my computer it starts off without wi fi and I have to manually go back to ip address and either adjust to manual or renew lease.
    Any ideas?

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • Manually change the "sent from" field in mail

    Hi there,
    I have a MobileMe account set up in Mail but I would like my sent messages to appear as if they were sent from another email account (a non mobile me account).
    Is there a way to do this ?
    Thanks for helping !
    Marc

    You can fix this problem by adding an entry into a file on your mac. You have to add an alias, but manually so by editing this file below:
    I finally found a solution. You can edit this file where USERNAME = users acutal account on the mac:
    Close Mail.
    Go to:
    /Users/USERNAME/Library/Mail/V2/MailData/accounts.plist
    Under this:
                <key>EmailAddresses</key>
                <array>
                    <string>[email protected]</string>
                </array>
    Type:
                <key>EmailAliases</key>
                <array>
                    <dict>
                        <key>alias</key>
                        <string>[email protected]</string>
                        <key>name</key>
                        <string>Name 1</string>
                    </dict>
                </array>
    Save version of file.
    Open Mail.
    I hope this helps - it seemed to work for me.

  • Manually change the track order in a playlist?

    I have purchased and downloaded 20 tracks from the Itunes store with just two artists involved, 8 tracks from one and 12 tracks from the other. I've created a playlist and at the moment the tracks are listed first by artist 1 and then artist 2. I want to burn this playlist to a cd, but before I do I want to shuffle the tracks manually.
    There seems to be no obvious way of doing this. Help would be appreciated.

    The choices available in the Sort By dropdown are based on the columns you've chosen to display in Songs view (which is why - in part - your screenshot looks different to mine).  However, the only place I can see where the Manual Order option is absent is where you are looking at the complete Library (where the Track Number column is not being displayed) and not a specific playlist.  In the latter case I always get that option, independent of the columns that are selected and displayed.
    Likewise, every playlist - when viewed in Songs view - has an unlabeled column at the left hand side which is the effective "play order" for the playlist (which is what tt2 refers to in his response above).  Also, your screenshot shows an "iCloud Download" option, which I only see as being available when looking at the library as a whole and not at a playlist.  I was also caught out by the presence of a "Ticked" option but I assume that this is a regionalization issue - for me (configured for US English) the corresponding entry is "Checked".
    You may have an underlying issue here but I would double check that you are looking at Songs view for a specific playlist and not the whole library.

Maybe you are looking for