Assigning a source of supply in sourcing cockpit not working.

Good day Gurus,
When we assign a source of supply in sourcing cockpit we get the following error : Invalid combination of sources of
supply for item 1200012571/1
This is how we got the error.
Create a shopping cart and approve it.
Go to sourcing cockpit and in the comntract column enter the contract number and in the contract item enter the contracts item number,when click enter we get the error as indicated below.
Please assist,Your help is very much appreciated.
kind regards,
Lethabo Kgatla

HI Anamika,
I created a free text shopping cart and wanted to propose the source of supply without using the propose source of supply button and got the error.The functionality did work previously and does not work anymore.I am trying to find how can be resolved.
Regards,
Lethabo

Similar Messages

  • My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    I have the same issue.
    The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
    With a new battery the same happens, although it can run on battery but does not charge.
    It runs fine on mains power, the green light is always lit.
    I have tried several things so far:
    1. Cleaned the magsafe contacts on cable and macbook
    2. Reset SMC and PRAM
    3. Installed latest battery update
    4. Tried new battery
    5. Put old battery in fridge for an hour
    I work in IT and am fairly confident taking it apart, what should I try next?
    Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before.  Also some people say it will need a new logic/motherboard.
    Any experts here managed to sucessfully fix one of these?

  • Assigned F key to play an action does not work. Why? Using cs6  iMac and wireless key board

    Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6  iMac and wireless key board.
    Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

    *** Moderator Action ***
    This networking question has been moved from the Solaris 10 discussion space,
    to the Solaris Networking discussion space, for closer topic alignment.
    Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

  • Reset the Source of Supply from Source of Supply Tab

    Hello All,
    I  am looking for a BADI to reset the source of supply assigned automatically ny the system , when a single contractr/info record exists for the same in the BE system.
    Are you able to help please.
    Cheers,
    Sid

    Hello Sidhyesh,
    Go to transaction <SE18> and check BADI BBP_SOS_BADI.
    You can implement this BADI in transaction <SE19>.
    Regards,
    Marcin Gajewski

  • NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

    Hi,
    I think this forum is my last resort.
    I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
    Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
    on EP as ABAP WebDynpro iView.
    From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
    On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test. 
    On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
    However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
    Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
    More detail:
    My System Alias for ECC:   
          Application Host: myr3.mydomain.com
          SAP Client: 600
          SAP System ID:   DEV
          SAP System Number: 00
          Server Port:  <leave it blank>
          System Type: SAP_R3
          Logon Method:  UIDPW
          User Mapping Type: admin,user
          ICM Host: myr3.mydomain.com:8000
          ICM Protocol: http
          ICM URL prefix: <leave it blank>
          SAP Netweaver AS Description: <leave it blank>
    All other fileds are leave it as default value
    I also assign a group to have "read" and "user" permission to this system
    Also assign Alias to the system.
    I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
    I tested the System alias, it is working (both WEB AS  test, and R3 test)
    Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
    as I mentioned, it always show "Nothing Found. Check your search crieteria"
    But I'm sure the web dynpro applications are activated on R3.
    OK, that's it, please help this one. Thanks
    IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
    Edited by: Wilson KU on Nov 14, 2011 10:42 AM
    Edited by: Wilson KU on Nov 14, 2011 10:46 AM

    Thanks for the reply,
    [About Backend]
    I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
    http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
    I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
    [About the system object in EP]
    I have done all kind of test on the system object (alias):
    1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
    2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
    SAP Web AS Connection:
    : Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check if the system can be retrieved
    3. Check if the system object has a valid system alias
    4. Check if an SAP system is defined in the system object
    5. Validate the following parameters: Web AS protocol; Web AS hostname
    6. Checks if the host name of the server can be resolved.
    7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
    8. Check HTTP/S connectivity to the defined back-end application
    Results
    1. The system ID is valid
    2. System retrieved successfully
    3. Retrieval of the default alias was successful
    4. The system object represents an SAP system
    5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
    6. The host name (soeprdev.mydomain.com) was resolved successfully
    7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
    8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
    Connection Test for Connectors:
    : Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the back-end application using the connector defined in this system object
    Results
    Default alias retrieved successfully
    Connection successful

  • Adobe Reader 11 "choose paper source by pdf page size" does not work

    Hello,
    I have a user that utilizes the "choose paper source by pdf page size" option when printing a PDFs. He has a PDF that has a letter sized page and a legal sized page.
    I recently upgraded his Adobe Reader from 10 to 11 and now that option isn't working for him. The printer is an HP LaserJet M2727nf MFP.
    Are their any bugs regarding that feature in the new Adobe Reader?
    Thanks!

    If you have not updated Acrobat, try that before you go further. Currently AA9 is at 9.5.1.

  • Filter on the same logical table source on two logical tables is not working properly

    Hi,
    In the RPD, assume that I have a physical table named Employee_fact, created an Alias called D0 Employee Fact
    In the BMM I've two logical tables called Employee_fact_Type1 and Employee_fact_Type2
    Each of these logical tables has the same Logical table source - D0 Employee
    But in each logical table source, I've a filter in where clause
    such as, for Employee_fact_Type1  employee_type = 'XXX'
                 for Employee_fact_Type2 employee_type='YYY'
    These two facts are present in the same BMM and each of them are connected to two dimensions
    such as
    Dept_type1 <- Employee_fact_type_1 -> Tenure_type1
    Dept_type2 <- Employee_fact_type_2 -> Tenure_type2
    In analysis, When I query the columns from Dept_type1 and Tenure_type1, the database query generated shows the condition employee_type='YYY' instead of employee_type='XXX' .
    But, adding the columns from Dept_Type1, Employee_fact_type_1, Tenure_type1 it shows proper filter.
    I checked the relationships, presentation layer for the sources of presentation tables and everything looks good.
    Can anybody tell me what goes wrong here?

    did you set the content level as well?

  • Archive Source Files with Errors, Option Does not work

    Any one tried "Archive Source Files with Errors" on the
    sender adapter. It shows no effect.
    1.We are on SP19.
    2.Adapter type : FTP adapter.
    Steps for the Reconstruction 
    1. Configure a sender FTP adapter.
    2. choose the option "Archive Faulty source files"
    3. Specify a directory for "Directory for archiving Files with Erroors"
    4. Send a file which can cause File Content conversion errors.
    Regards,
    Raj

    Hi,
    FYI
    I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
    In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
    Rgds,
    Moorthy

  • Supply and Demand Propagation not working in SCM5.0

    Just curious if anyone is using S&OP (Supply and Demand Propagation) in APO?
    I am using SCM v5.0 and Planning Area 9ASNP01 can not be initialized.
    OSS 832393 states:  The SNP propagation planning (planning area SNP 9ASNP01, transaction /SAPAPO/SNPSOP) can only be used with times series live Cache. In productive systems, this functionality should be used only after consultation of SAP.
    I am trying to use the standard default SAP Planning area 9ASNP01 and am curious what needs to be done to use it?
    I am submitting on OSS message for this, but am curious to see if anyone is using S&OP currently in APO?
    Ken Snyder
    [email protected]

    Ken,
    I have just posted a similar question to your regarding S&OP, have you in the meantime managed to obtain some information regarding anyone using propagation (S&OP), and any advantages/disdvantages?
    Regards
    Paul

  • SRM 7 automatically assign source of supply in SOCO

    Hi guru,
    I'm working with SRM 7.0 extended classic scenario and i have to transfer external requirements from backend SAP into SRM Sourcing Cockpit. In the SOCO I have to determine automatically the source of supply and the price.
    I read that in the SOCo the sources relevant are:
    1. contract
    2. interlinkage
    3. vendor list ( there isn't information of price)
    Could you please explain me how it works this functionality, and the priority in the determination of supply and price?
    Have you documentation about ?
    Thank in advance
    L.

    Hello,
    If there is only one source of supply available (it does not matter if it is contract or info record), system will assign it automatically.
    If there is more than one, you can press "proposed sources of supply" button and SRM will show all available sources of supply.
    Price will be taken from sources of supply in any case.
    Regards,
    Ricardo

  • Source of supply is not updating in me53n from fiori App order from Requisition

    Hi,
    I am using Order from Requisition APP, to create a PO from Approved PRs.
    while doing this, there is a step assign Supplier, i am assigning the supplier and created the PO Successfully.
    But in backend, when i checked in t-code ME53N for Source of supply tab for a particular PR item. that tab is not updated with vendor details.
    when i checked in created PO it gets updated there.
    Purchase REquisiton
    PO CREATed with above PR
    Is there any workaround to update the source of supply in backend.
    Thanks,
    Venu
    Tags edited by: Michael Appleby

    Hi,
    We are using classic scenario in SRM 5.0.
    We are using desired vendor in the purchase requisition, whenever the Purchase requisition is moving into the SRM Sourcing cockpit. We are unable to see the source of supply.
    Source of supply is missing in sourcing cockpit (SOCO).
    desired vendor number which is not updating, instead it is showing empty.
    I have found some BADI like BBP_SOS_BADI and BBP_SOS_BADI_ICC, this BADI will trigger when a shopping cart has contract GUID, but we donu2019t have contract for this purchase requisition.
    Could you please tell me the BADI or user EXIT name, by using this BADI I can populate the populate the source of supply and vendor in SOCO.

  • Problems with sources of supply determination for external requirements.

    Hi gurus...
    My scenario is  SRM Classic Extended.
    We have a problems with sources of supply determination for external
    requirements comes from ECC. The shopping cart is created with successful
    based in the purchase requisition at ECC, but when i try to make the
    determination of sources of supply the system doesnt find any source of
    supply.
    There are a lot sources of supply creates for these parameters. The
    contracts were already replicated to ECC.
    This problem only occurs with external requirements comes from ECC, if i
    created a shopping cart directly at SRM, using the same parameters, the
    system propose the sources of supply correctly.
    Is there something that we can do?? This is the normal comportment for the souces of supply?
    Tks,
    Gustavo Nogueira

    Hello Gustavo Nogueira
    Then it is an issue.
    How are you searching the source of supply in sourcing cockpit.
    Can you replicate the issue?
    Let me know step by step,
    as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
    please share what source of supply you have there .

  • Source of Supply Error?

    Hi,
    I am currently experiencing the following problem: (We are running SRM 5)
    I replicate vendors from the R/3 system to SRM via BBPGETVD trans code.
    I select the correct Object ID (for the Vendor Org structure I created in PPOCV_BBP)
    I check that the Vendors have been replicated (They appear in Vendor Org structure – PPOMV_BBP)
    BUT these newly replicated Vendors do not appear in the Source of Supplier when I try to assign them when creating a Shopping Cart?? It’s strange cos the previous batch of vendors I replicated worked fine and appear in the Source of Supply??
    I’ve also run the business partner check transaction: BBP_BP_OM_INTEGRATE and checked that the Org units are synchronized. I have green lights for everything.
    I’ve checked that the replicated vendor is mapped to the correct Purchasing Org, Manually in the Frontend (with Admin user via “Manage Business Partners”) and
    via the Backend with trans code BBP_UPDATE PORG. The vendor is assigned to the correct Purch Org.
    What am I missing here? Any help would be appreciated.
    Regards,
    Shayne

    Hi
    Note 901497 Industry-specific fields not changeable in the quotation 
    Note 902719 Implementation of interface method in Novation Class 
    Note 833098 Tabular customer fields in quotation increased entries
    Note 822424 CUF. Customer fields cannot be changed in the bid
    Note 809630 - Customer field in bid invitation and bid - How does it work?
    Hope this will definitely help.
    Do let me know, incase you need any other details.
    Regards
    - Atul
    Hi
    <u>Please go through the following SAP OSS Notes, which will help -></u>
    Note 1030627 - Source of supply not found for service items
    Note 1051985 - Proposed source of supply new vendor address doesn't update
    Note 1062273 - Source of supply not listed completely in classic scenario
    Note 1024423 - Source of supply not found for service items in shopping cart
    Note 1039542 - Source of supply from catalog reset on change of location
    Note 1039945 - Source of supply list is not refreshed
    Note 1043176 - Source of Supply Selection not shown from Purchaser inbox
    Note 1003666 - Determining the source of supply takes a long time
    Note  988252
    <b>Other Related Notes</b>
    Note 1006929 - Performance improvement while fetching source of supply
    Note 927077 - Error during the automatic assignment of a source of supply
    Note 905894 - Performance improvement in Sourcing
    Note 991898 - Source of supply not reset when product type changes
    Note 931757 - Source of Supply not copied correctly
    Note 881695 - Source of supply with item changes
    <u>Some other related SAP links -></u>
    Re: Vendor exists in R3 but BBPGETVD could not find it ?
    Create SC using >BBPSC03 in SAP GUI
    Source of supply problem
    Source of Supply
    Re: Source of Supply problem
    SC does not determine source of supply if Source List maintianed in R/3
    Source of supply in shopping cart
    Re: Source of Supply problem
    Sources of supply in SC not visible
    Contract Source of Supply Not Populating in SC
    Do let me know.
    Regards
    - Atul

  • Source of Supply

    Hi everybody,
    We are on SRM 5.0 (classic mode). When we create a described requirement the system gets all the sources of supply from the backend system. If there are many sources of supply the system does not assign any one source of supply automatically. However if there is only one source of supply the system automatically assigns the source of supply. Is there a way to not have the system assign the souce of supply to the shopping basket (when there is only one source of supply available)? This should happen only for described requirements shopping basket.
    Any ideas or suggestions will be appreciated.
    Thanks in advance for your help.
    Venkat

    Venkat,
    <b>Currently we are using punchout. Unless we create a info record it does not create a PO in the backend system. Is there some thing we have to do for punchouts?</b>
    You dont need to get PIR and contracts for the creation of PO's from punchout catalogs. The configuration step SPRO>SRM SERVER> MASTER DATA> DEFINE EXTERNAL WEB SERVICES will let you assign the BP number for the catalog. This will be transferred to SRM shopping cart as a partner function 19 from the OCI.
    Select a business type product catalog for the new Web Service and confirm your selection with Enter. Once you do that the next page will ask you for additional info liek teh BP number for source of supply. This step will automatically ensure the transfer of the source of supply to SRM as a fixed vendor and enable the PO creation.
    If this is satisfied with this step, then you can suppress the source of supply with my workaround solution only for describe requirement. '
    Also i have a business question for you. If you want to suppress the source of supply of a product category only in the describe requirement, it really doesnt make sense as in the internal goods you use the source of supply for the same product category.
    If your business driver is creation of the follow on document on the basis of the shopping cart (describe requirement or internal goods/services), then i guess for the same product category you need to find a distinguishing criteria between the two and use a BADI to force changing the partner function from 19 to 39 (preferred vendor). This will create a PR for describe requirement.
    Hope info helps !!
    Please assign points if answer is usefull !!
    Sundeep

  • SNP - Issue with PDS as source of supply in low-level code run

    Hi All:
    I have a bunch of PDS that is giving me the following message when the SNP Low-level code is run:
    ''Invalid source 00000010382991380SLT1 S is not considered for low-level code calculation.  The source of suppy 00000010382991380SLT1   S is available actively in the Supply Chain Model. The location product for which the source of supply is intended, does not exist, however, or is no longer assigned to the model. The source of supply is therefore invalid. ''
    I tried all of the following but still did not get to work
    1. Made sure that FG and all the active component of one FG and the location and the PDS were in an active model.
    2.  Made sure that there was one production version and hence one PDS
    3.  Intialiazed the Planning area with the version
    But still would not generate the low level code for the product location.  Can some one throw share some insight and help pl?
    Thanks
    Ryan

    Could you please check whether in the Product Master, Procurement tab, the Procurement Type is set as "P - external procurement planning"? If yes, then that's the reason as the Low-Level Code is only calculated for Products that are to be planned in APO. In this case, change procurement type to X or E and it should work.
    Regards,
    Tiago

Maybe you are looking for

  • How to create an array of doubles??

    hi i want to be able to enter several numbers as string which are then converted into doubles. these will have to be stored into a doubles array. how can i do this????? below is somethin that i have done but i dont think its right! can some1 lend me

  • Progress Billing with Downpayment and Retention

    Hi SAP Gurus, I just wanted to check if you have encountered a scenario wherein the purchase is billed progressively and that downpayments and retention are recognized for the purchase. For example: Total Contract Price: 9900000 1. Downpayment (30%) 

  • View object editor for complex sql query in expert mode

    I find not convenient that the editor is modal so we cannot browse tables or procedure functions definition and that it is not possible to close it even the statement is not correct (to search for exact naming etc ...). May a way will be to show a li

  • How to use the action OnExpandAll on UI element Tree

    Hi, experts . I am in WDA developing project and developing the screen which has Tree . I want to expand all nodes when users click the button on the head of Tree . I copied the application `WDT_TREE` and created Tree of my application successfully .

  • How do I move a post/thread to a different forum?

    How do I move a post/thread to a different forum? TIA, David