Assigning a template when importing a project

Is there a way to assign a template when saving a Project to the PWA for Project Professional for the first time?
I ask because some templates have a predesigned SharePoint site connected with them.
In that situation, am I better off copying and pasting to a blank project made with that template?
Thank you.

Hi Sean,
When you create a new project from the project center in PWA, you have to choose an EPT (Enterprise Project Type). EPT are kind of a container where you put a project site template, project plan template, project detail pages and workflow. If we just consider
project site template, it means that you can define a custom Project site and attach it to an EPT so every project created from this EPT will have an associated site based on the template.
Thus note that from MS Project Pro, the default EPT is taken by default with no way to select one particular EPT. Note also that the project site is created when first publishing the project itself.
See references below:
http://blogs.msdn.com/b/brismith/archive/2010/03/15/customizing-the-project-site-in-project-server-2010.aspx
http://www.prasannaadavi.com/2013/05/customizing-project-site-template-in.html
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

  • Lose model when importing a project

    Hi
    I tried for the first time to import a project and I noticed that ODI had lost all links with models for target datastores :
    To be more specific, when I open an interface, its status is "in error" and the target datastore appears with a red cross. When I click on the "properties" icon, I can see that my datastore is not linked to a model.
    In addition, when I ask for usage of the datastore in the "model" tab, I can verify that it is not used.
    NB : the project was first created in this repository (that I will call "repository A"), then exported to another (repository B). It was then deleted from repository A and imported from repository B.
    The model was neither deleted nor imported.
    Is there a way to save the links between project and model while importing ?

    Cezar - I have the exact situation that this user describes. I checked the i_mod versus the version tab/internal id of the model and they are the same. Thoughts on the best next steps?
    To recap:
    1) I exported from my DEV environment both my model and project folder
    2) imported into my TEST (different server, etc) first model, then project folder
    3) no issues on import of model or project folder
    4) when I open an interface, it's in 'error' status and I cannot view data with right click on data stores (within interface) (data stores have the little red X on the top left corner)
    5) I CAN view data when I right click on the table in the MODEL tab.
    When I try to view data for my data stores in the diagram of my interface, I receive this error: Cannot display data: Datastores are not on the same data server
    or one of the tables is not accessible on the data server
    Thoughts???
    Many Thanks,
    Dan

  • Media offline (but not first clip) when import cs4 project to cs5

    I've several clips in a cs4 project.  All original clips, all from the same footage, are in the proper folder.  When I imported the project into my fresh cs5 install, the first clip shows up properly -- video and audio are present -- but the rest in the sequence show "media offline."  When I search for the clip and select it to be linked, I'm informed that "The selected files do not contain audio media used by clip references in one or more sequences."  Clicking yes then gives me a clip in the project resources and timeline windows with no sound.
    This makes no sense, since all clips are from the same source footage.  If the first clip in the sequence is fine, what's the problem?  Thanks for your help.

    I figured out what has happened.  The clips were all from same original source, but somehow some had audio coded in mp2, others in mp3.  The first clip was mp3 and Premiere CS5 version spotted that codec.  For some reason PCS5 is not spotting the mp2 codec, while CS4 could, which is why I didn't have this problem back then.
    The initial "media offline" message is terribly misleading, and the audio problem message is not specific enough.  I'll try to get CS5 to use the mp2 codec CS4 worked with.
    Thanks for your time.
    Just to confuse things more, It's worth noting that the mp2 clips show up in Bridge cs5 and the audio plays fine there.  What's with Premiere Pro?  Irritating.

  • Errors when importing a project in NWDS

    Hi All,
    I imported the SAP delivered project Webdynpro_OVS_Valuehelp into NWDS. I get the following errors:
    Missing required library: 'C:Program Files/NWDS716/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/webservices/_comp/gen/default/public/default/lib/java/jaxrpc-api.jar'.
    Missing required library: 'C:Program Files/NWDS716/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/webservices/_comp/gen/default/public/default/lib/java/sapxmltoolkit.jar'.
    Missing required library: 'C:Program Files/NWDS716/IDE70/eclipse/plugins/com.sap.tc.ap_2.0.0/comp/SAP_JTECHS/DCs/sap.com/webservices/_comp/gen/default/public/default/lib/java/webservices_api.jar'.
    The project was not built due to classpath errors (incomplete or involved in cycle
    Any help would be appreciated.
    Thanks,
    Tom

    Hi,
    Right clikc on your project in WD perspective>properties>References>Java Build Path>you would find the path for the jar files over here, just remove those entries and then set the correct path by selecting it from the list.
    Regards,
    Murtuza

  • PPro CC 2014 freezes when importing AE project

    Hello, I've updated all Adobe programs to CC 2014. I'm trying to import an AE project into PPro so that I can test the new updates, but I've tried several different AE projects and they all freeze the program. Any ideas as to why this is happening?
    Working on Mac Pro OS X 10.9.3

    Thanks for the quick response, Mr. Haugen. So I tried that. It kind of works, and it'll have to do for now just so I can finish up.
    Opening up a previous auto-save actually does the same as the main project file I'd been working with. But like I mentioned, if I open a working project file first and then this one, it does allow me to play back. The auto saved one at least let's me make edits and export without freezing. But I still can't switch over to another timeline, otherwise it freezes again. So, problem not really solved, but I'll kind of walk on eggshells as I work just to complete the edit, and then hopefully never have to come back to this project file again if I can't figure out the issue completely.
    I'm still open to more suggestions if anyone has them!

  • Invalid date assigned to folder when importing

    I'm using Trial version (1.0) of Adobe Photoshop Lightroom.
    I'm planing to purchase the product but I found one large annoyance.
    My PC is set to New Zealand Time zone (currently DST id off) .
    In the import dialogue I can select folder name like year/date pattern from a preset. This is really great, I do not need to set date time every time I import the image, but it always set to the tomorrow's date.
    The date and time in the EXITF meta-data shows correct time of shooting.
    I'm really puzzled why it flick to the tomorrows date on the import dialogue.
    Is this adjustable at anywhere or bug?

    Ah, Geoff, one of our fav. Kiwi's ought to be along before long.....
    <br />
    <br />
    <span style="color: rgb(102, 0, 204);">John "McPhotoman"</span>
    <font br="" /></font> color="#800000" size="2"&gt;~~ John McWilliams
    <br />
    <br />
    <br />
    <br />MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8;
    <br />Canon DSLRs

  • Error importing old project into Premiere Elements 11

    Trying to import old project backup - that I made a couple of years ago.  When importing the Project file, I get the error
    "The selected file cannot be linked because it's type (video) does not match the original files type (audio and video)."
    I try and select the file, but it then gives the error "The selected file cannot be linked because its type (audio and video) does not match the original file's type (video).
    If I skip the ones that give me the error, I get an incomplete edit - with lots of bits missing.
    HELP!!!  I need to sort this asap......for a client.
    Thanks

    filippinno
    Here is my plan, either a start to better or a dud. We are going to start small to get a foothold in this.
    My major puzzlement is you telling me that you are replacing video with video and getting the message
    The selected file cannot be linked because its type (audio and video) does not match the original file's type (video)
    .The only time I have ever seen that message is when someone is trying to replace still with video or video with still.
    At this moment, where are the source media that went into the original Premiere Elements 9.0/9.0.1 project? Let us say, all in Documents in a folder named Special - all have their original names. Given that you are 100% that they are the ones that went into this project...the type (video or still) and file name and file extension.
    I am not sure if it matters for this test whether or not you are using Premiere Elements 11 or 9.0/9.0.1, I just want to find out what is going on with your source media.
    (a) Open the project using Skip All if you are hit with a bunch of "Where is....?" messages which I assume you will be.
    (b) Go to the Timeline, pick a file with the colorful Media Offline display, write down the file name from its title band.
    Right click that file on the Timeline and select Find in Media.
    From Organize Media, delete the Media Offline thumbnail that was pointed out to you clicking Reveal in Media.
    Go back to the Timeline and this same file, right click it and this time select Reveal in Project. That should take you to Project. Delete the file there that Reveal in Project points you to. That will also delete is counterpart on the Timeline. All traces of that particular Media Offline file are now gone in the project.
    In that project, go to Get Media/Files and Folders and browse to and select the original file (with the exact same file name and kind that you just deleted from the project) that you have saved back in that Special Folder in Documents.
    Drag that file from Organize Media or Project to the Timeline in the space made available by your deletion of it as an Media Offline thumbnail.
    Does that work to replace that particular file. Is it the file that you had there originally? Keep in mind that we are identifying this file by name in each step and need a match of file name from start to end.
    If this works for one, then we can plan around this basic finding. And, if this works we may revert back to Replace Footage. But, let us see what happens here first.
    What is your estimate of how many of these Media Offline displays are there to be dealt with? How many of the media are in place on that Timeline and are no problem?
    Looking forward to the results.
    Thanks.
    ATR

  • How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values?

    How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

    How do I copy/paste full numerical-only account strings into the Projects WebADI template when the account segment fields in the template require use of the dropdown because they're formatted as alpha-numeric values? I'm using the Integrator named "Projects - Transaction Import" and a custom Layout created based on the seeded Layout named "Transaction Import - Accounted". Do I need to somehow change my Layout to make the Document accept numerical values instead of requiring alpha-numeric values? I need to be able to populate the Document with a large amount of transactions and cannot feasibly go through every transaction to add the alpha-valued name of the account segment to every segment that requires it. The segments in particular causing the problem are "Expnd Type" and "Organization Name" which are both alpha-numeric and as such contain the segment number and name; I need to be able to only have to enter the Natural Account Number (6-digit number only) and the Organization Number (5-digit number only).

  • Expense Report Template -Accounts code not appearing when imported to AP

    Hi Gurus,
    I defined Expense Report Template for OU1, and for the courier expense i defined account code as 01-110-7410-00 ( Co-Dept-Courier Expns-IC)etc. with expense type as courier.
    But when i submitted Expense Report using the same template and when imported to AP,accounts codes are 01-101-7610-00(Co-Dept-Salary-IC). Its totally wrong iaccounting treatment. This wrong acount codes came from HR whch assigned in Asssignment for Purchase Order Information.
    Please provide your suggestions.
    Thanks in advance
    Regards
    Dinesh

    Hi
    We have the same requirement.
    Can I ask what your solution was?
    Did you have to do some customisation or was there a standard solution available?
    Many thanks in advance
    SK.

  • Final Cut Pro X crashes when I try to import iMovie project?

    I have a large iMovie project that I am trying to import into FCP. Every time I do (FILE -> IMPORT -> IMOVIE PROJECT) it starts to import, then crashes without warning, giving me a crash log report.
    I am able to import another smaller iMovie project just fine, but the one I actually need to import doesn't work.
    Both projects use video clips from the same event library.
    Any ideas? Or in a backwards way, any ideas on how to recreate it in a fresh iMovie project to import into FCP? (I've tried duplicating it in iMovie and it crashed on import too).
    (...I understand why there have been so many complaints about FCP now.)

    Figured it out! After almost 24 hours, I cracked it
    Let me give you a bit of back story...
    I had an iMovie project that I had built on my Macbook. I just got a new iMac and installed FCPX on it. Was hoping to do some more professional alterations to the project.
    So I consolidated the project in iMovie, copied it along with the files to an external hard drive, then transferred it over to my new machine.
    Every time that I would try to import the newly copied project, it would get a few seconds in, then crash with no error message... just a crash report.
    I was able to import a smaller project that used some of the same videos, so I knew that it wasn't a codec issue or something like that.
    Then, through the process of trial and error, I figured out that when I had consolidated the project on my old machine, it didn't truly consolidate the files that I had used. There were a handful of still images that I had used in a different folder on my computer. So I copied that folder to the same path on my new computer, tried to import, and just like that, problem solved.
    I guess FCPX doesn't know what to do when something isn't exactly where it's supposed to be. Hopefully in the next software update, they'll alert the user what the error causing it to crash is so that others don't have to waste nearly a day troubleshooting for one obvious (oops) mistake.

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • Premiere Pro CC crashes when I import CS6 project files

    I recently upgraded to CC, but every time I try to import my project file from Premiere Pro CS6 into Premiere Pro CC it crashes, or stops working if you like.
    This is very irritating as I wanted to make use of the SpeedGrade workflow in the CC packaged between Premiere Pro CC.
    My project file is no longer than 1 minute, however is does contain After Effects CS6 compositions, could this possible cause the crash? I have tried to import without these but it still stops working for some reasons.
    Also I have no idea where to find the error log for crashes on Adobe software.

    I have experienced similar crashes and timeline playback failure when importing a CS6 project into CC or CC 2014. I had to rebuild two projects by hand before I realized it was a bug in CC converting the CS6 project files to CC project files. I don't think this has been addressed yet, but I have had better luck starting projects from scratch in CC, not cross-converting a CS6 project. Although I'm still experiencing issues with multicam projects in CC 2014.
    Curious to hear others chime in on this.

  • IMovie changes video size when importing its own exported projects

    How can I control aspect ratio on imports - or simply get iMovie to import .mov files at their current and correct aspect ratio and size, as settings indicate? iMovie is messing with them.
    I'm re-importing a lot of finished, exported iMovie files because a hard drive crash resulted in the loss of the original projects. As I'm doing this, I notice that these same Quicktime .mov files created by iMovie get squashed and stretched when imported as new events. Despite the fact that I'm using the setting "Full - Original Size."
    When I import using the setting "Large - 960 x 540" the aspect ratio is correct, but the frames are reduced in size.
    When I import the same videos by first putting them in iPhoto, and then accessing them through "iPhoto Videos" they are perfectly copied, with correct aspect ratio. But I don't want to have to keep taking this extra step.
    Thank you!

    stage6 files use DivX for encoding.. a HighQuality produced iMovie project could look as good as the stuff there.. allthough, many 'videos' I've seen there are NOT done with a 200$-cheapo-consumer cam.. you can teach Quicktime, and therefore iM to export with that codec... install divx-plug-ins..
    to edit natively non-dv-streams, only alternatives are FCpro (=$$$$) or QTpro (=less convenient).. plus a few 'exotic' apps, as the free Mpeg Streamclip, which allows some 'raw' editing of mpegs etc. ...-
    but..
    if your input is from camcorders, the 'raw' footage is interlaced and low-res, compared to what you see normally on a computer's screen..
    if your input is e.g. computer generated (CGI), use for export Apple Intermediate Codec, which is the HiDef codec of iMHD6 .. and probably, use a setting of a higher res, as 1080..
    if your input is screengrabs, they don't match the TV-resolutions, iM offers, nor do they match the framerates...
    so, what source, what delivery...?

  • Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger?  Or we have to keep the clip in iMovie until the DVD are burn?

    Does someone know when our movie project and finally our iDVD project is done, can we erase the clip that we had imported in iMovie without danger?  Or we have to keep the clip in iMovie until the DVD are burn?

    Hi
    Most processes in Non destructive Video editing is based on that the raw-material is safe and intact. So by trashing it most things can or will go wrong.
    So e.g. in iMovie project - there is NO Movie - just a small text document refering to Your raw-material, audio files and photos (within or not in iPhoto Library) on how they are to act together to Play Your Movie.
    And by changing any of them the Movie project will be affected or destroyed.
    reg. iDVD there is also a link back to iMovie - Most famous to set of the iDVD BUG !
    To do that - one starts a new iDVD project and add movies etc. Then find something i one movie in need to be adjusted. Closing iDVD and returning to iMovie and doing this. Then when back to iDVD it will notice and ask You to Up-date or Cancel. Neither works. The iDVD project is harmed. All Chapters now point to Chapter One and more strange things happens.
    the medicine I use - I start a brand new iDVD Project and re-do it and hopefully not fine any more to be fixed in the movie.
    This indicates the strong link inbetween iDVD and iMovie and I would not touch anything in iMovie till DVD is Burned and Ready AND Plays Well !
    Yours Bengt W

  • Error Importing Adapter Project Template

    I am trying to import xml template PROJ_Template_Adapter_Project and I am receiving the error message below. I am using ODI 11.1.1.5. Is anyone familiar with this error?
    com.sunopsis.core.SnpsInexistantObjectException: ODI-10038: The interface you are trying to use (ERP to Logical Balances) is related to a logical schema (ERP_SOURCE) that no longer exists.
         at com.sunopsis.dwg.ImportListener4XRefs.getWorkITechno(ImportListener4XRefs.java:376)
         at com.sunopsis.dwg.ImportListener4XRefs.getITechnoOfSrcTable(ImportListener4XRefs.java:311)
         at com.sunopsis.dwg.ImportListener4XRefs.insertTxtXRefs(ImportListener4XRefs.java:232)
         at com.sunopsis.dwg.ImportListener4XRefs.insertXRefs(ImportListener4XRefs.java:183)
         at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:6058)
         at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5650)
         at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5695)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:375)
         at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1248)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
         at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
         at java.lang.Thread.run(Thread.java:662)

    Yes. We are familiar.
    You are trying to import the project into a new work repository. And the Master repository for this work repository doesnt contain the logical schema ERP_SOURCE. You will have to create this logical schema (and perhaps physical schema and other connections too) and then try to import your project.

Maybe you are looking for