Assigning all the exposure at a time

Dear Gurus,
In txn THMEX, currently we are able to assign exposures to FWD transactions one by one, is there a way that we can select all the  Hedged ITems  and then assign at a time to a forward/s.
Thanks in advance...
Nikhil

Hi Nikhil,
The functionality for grouping of several exposures to one hedged item doesn't exist. But there are two possibilities:                                                            
1. if you use exposure management 1.0 you can assign several exposures and transfer them to one exposre in the hege management. Each exposure from the exposure management will be stored as exposure transaction in hedge management
2. If you use exposure management 2.0 you should group the exposures directly in the exposure management and transfer only the sum into hedge management.           
BR, Tomislav

Similar Messages

  • Do I need to use all the hard drive for time machine or can I partition it

    Do I need to use all the hard drive for time machine or can I partition it

    You cannot partition a TC disk.
    See pondini about mixing data and backups.. but remember this.. the TC has no way to back itself up and TM cannot backup files on the TC. Anything not backed up on the TC will be lost at some future point.
    http://pondini.org/TM/TCQ3.html

  • Approve all the tasks at a time in BPEL worklist

    Hi
    I hav edpeloeyd a bpel process wherein it creates 40 r 50 tasks at a time based on file polling xml....user wants an option in worklist application wherein he wants to approve all the tasks at a time and not individually..does anybody has any idea on this
    regards,
    ravi

    Best option is a programatic solution using the worklist API. I think there are threads on that topic.

  • I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.

    I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro.  I have downloaded all the drivers and it has passed all the tests.  Every time I try to fax it shows the job paused.  I can manually send and receive faxes but I can not do it through the computer. 

    Try deleting the printer, deleting the job queue and reinstalling the printer again.

  • I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

    i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

    The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
    That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
    4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
    When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
    Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
    Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
    I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
    Are your other projects, that worked perfectly, still working?

  • How do i stop all the popups every bloody time i click my trackpad a bloody mackeeper or similar pops up

    how do i stop all the popups every bloody time i click my trackpad a bloody mackeeper or similar pops up

    In addition to reply from Niel, some generalities
    There are at least two schools of thought expressed by experienced users here in this Apple community regarding malware and popups.
    One school primarily uses free application(s); the second school requires no additional software and just some simple steps on your part.
    Read these (of many threads) discussions.
    Yosemite OS X & MacKeeper I can't unistall
    Got a malware on OS X Yosemite, how do I get rid of it?
    "Ransomware" web pages
    Pop up problems in Safari on OS X Yosemite!
    See these Apple notes:
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
    Safari 8 (Yosemite): Security pane of Safari preferences
    OS X Yosemite: Protect your Mac from malware

  • How to export all the projects at one time

    I got about 20 projects and content about 7000 pics. I don't want to just export project each time, and I would like to just export all of them at one time, is it possible?
    I don't know where and how to change the name of the master files, and how to organize them properly. Such as I dragged pics from one project to another album, but if I try to delete the pic in the project, it warns me I will delete the master file as well. In the end, I have so many unwanted pic in the project and I can't delete them. Please help with the organizing ...

    Let's start from the whole story. I got too many photos and too many project which taken too much spaces in my computer. So I want to delete those not too good ones and only keep a few in my laptop. On the other hand, some of those not too good ones I want to keep as well. So I use time machine to back up them, but it seems time machine only keep them for about 3 months. In that case, if I delete them, I don't think I would be able to find them after 3 months time.
    I am thinking about exporting them to an external hard drive as an extra backup.
    Now, another part of the story, I was exploring Aperture, setting up different projects, album and dragging the pics around, then everything becomes a mess. I notice that if I drag a photo from project A to B, then the photo will only appear in B but disappeared in A. But if I drag photo from Project C to album D, both of them would have the pic, delete the pic either in the project or the album, it will warn me that I will delete the master file... I don't know how come.
    Therefore, puzzled by where and how they store the master file and how they referenced it, I am here.

  • CWIMAQView​er toolbar not showing all the tools at run time

    Hi
    I'm using the cwimaqviewer control to display images acquired from a CCD camera.  I set the viewer's ShowToolBar property to true.  All the toolbar items showup fine at design time.  However most of them go missing at run time.  See attached photos.  I'm using VS2008, and version 9.0 of the CWIMAQ control.   Any ideas why this is happening?   I need the circle tool to draw overlay over the image.   Thanks.
    Design time toolbar:
    Runtime Toolbar:

    nikale wrote:
    Hi,
    I found a resource that may be helpful for you; I've attached the link below. It depends what you're wanting to do but chapter 3 Interactively Defining Regions might be a good starting point.
    IMAQ Vision for Measurement Studio™ User Manual: Visual Basic:
    http://www.ni.com/pdf/manuals/323023a.pdf
    I hope this helps!
    Kale W.
    Applications Engineer
    National Instruments
    http://www.ni.com/support
    Hi Kale,
    Thanks for the tip.  The document gives information on where to find particular examples, which is helpful. 
    I found this page that gives overlay examples.  I really wanted to see how the fifth one is done.  Unfortunately, it's implemented in LabView.  Is there a similary example in VB? 
    http://www.ni.com/example/25623/en/
    Thanks much.

  • Can I release all the activites  at a time?

    Hi Experts,
      I am have 50 activities in transport studio of NWDS which are supposed to move to test system. so can I select all the activities and release at at time from studio .
    Regards
    Sridhar

    Hi Sridhar,
    Yes, you can select multiple activities in the studio and release them together.
    But, be aware: if you select too may activities to release, your studio can run out of memory! Unfortunally I do not know the boundary for how many to select.
    Hope this helps.
    Regards,
    Alain.

  • Assigning all the components to work center

    Hi all ,
    I have exploded all the sub components of the BOM of a given material number and plant .
    Now i have all the details , now i would like to assign these materials to workcenters available for a finished product in ROUTING process .
    Is there any FM to assign the corresponding components to corresponding work centers in the routing process , so that we have to get the finished product in optimized way .....
    Please let me know you view....
    if there is no FM , let me know you suggestions ...
    Regards
    Raj

    Hi just check this link
    Configure IDOC
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    IDOC Packaging and mapping Techniques
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part1)
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    Introduction to simple (File-XI-File) scenario and complete walk through for starters (Part2)
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    and
    Useful thread for Beginers XI
    Re: Beginner in XI
    reward if helpful
    Regards
    Sachin

  • TS1591 I have an iPod Nano generation six, and since I had a new hard drive installed in my Macbook Pro, iTunes does not recognize it. I have followed all the troubleshooting tips, many times, and nothing works. My other devices are recognized.

    I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.

    This is the ipod touch forum

  • When I view my DVD on my computer it's perfect, after burning and watching it on my TV all the pictures flash 3 times.

    When I view my DVD on my computer it is perfect. When i watch it on my TV the pictures flash 3 times each.

    Hi
    Can be many origins to this - most common ones are
    • Use of cheap DVD media - I use Verbatim DVD-R
    • Burning DVD as full speed - I set it down to x4
    • Use of strange file formats (codecs) eg. .avi, .wmv etc - I use StreamingDV from miniDV tapes video and .aiff 16-bit 48kHz audio
    • I secure a minimum of 25Gb free space on START-Up Hard disk (important)
    Yours Bengt W

  • Why is my iTunes volume turned all the way down every time I launch the program?

    Everytime I launch iTunes I get a warning and my iTunes volume is volume is turned all the way down. How do I fix this?

    This worked for me:
    Close iTunes
    Open Finder and navigateto: Users>YourAccountName>Library>Preferences>com.apple.iTunes.plist
    Move that file to the desktop
    Launch iTunes (which will create a new prefs file)
    If the problem is now fixed, move that prefs file from the desktop to the Trash. There might be some personal settings in iTunes you will need to re-do.

  • The database migration report don't show all the erros at creation time

    Hello experts,
    I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
    Another question: how to list the objects that the tool was unable to create in the oracle model?
    best regards

    HHerrera,
    Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
    Regards,
    Turloch

  • My Iphone will not show up in Itunes. I have tried re installing Itunes and all the Apple devices multiple times and it still will not work. Help!!!

    My itunes is making me crazy. I have updated to IOS 6 on my phone from my friends computer. Then I had to also restore it. I tried re connecting to my computer but the itunes just says that it is not compatable. I tried turning the phone on and off. Restarting it and the computer. I have also un installed and re installed itunes and the apple support systems. I have no idea what to do now. Please help!

    Security Software and Related Troubles
    http://support.apple.com/kb/TS3125          Basic Troubleshooting
    http://support.apple.com/kb/TS3297          Advance Troubleshooting
    http://support.apple.com/kb/ts1629          Ports List
    Basics
    Check correct date, time, and timezone.
    Log in as administrative user account
    Verifiy iTunes updated
    Update Operating System “OS” (Ms Windows, Mac OSX)
    Update Modem / Router firmware
    Update security software (Antivirus, Firewall)
    Remove Outdated Security Software (Always restart afterwards)
    Advanced
    Remove Mobile Software not used anymore
    (Motorola, Android, Nokia, Sony, Blackberry)
    Add Apple programs to firewall permissions
    Allow Ports 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999
    Permit Domains - apple.com , edgesuite.net , mzstatic.com
    Disable Security Software
    Remove Security Software (restart!)
    Delete “Hosts” file and restart, or edit and save.
    Check Browser Settings: Use SSL3, TLS1, Auto Detect, No Proxy Settings
    Reinstall itunes FOLLOWING ARTICLE while all security off / disabled or completely removed.
    http://support.apple.com/kb/HT1923
    http://support.apple.com/kb/HT1925

Maybe you are looking for