Assigning and exporting podcast artwork

The podcast artwork that is exporting with my episodes seems to be stuck on the same one all the time. I'm not sure how to place the correct episode artwork for each new episode of my podcasts in the GarageBank window. For instance I have one GarageBand podcast project, but then I might have 8 episodes (each with different tracks) underneath. I have place new podcast artwork in the lower, editing window, but it's indicating chapters.
Is there any documentation on how to do this correctly?
Thank you,

I think it's not possible to make any cogent comment unless you would like to publish the URLs of both your feed and the Store page; this can be found by control-clicking on the podcast image - or where it should be - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

Similar Messages

My podcasts artwork is no longer appearing and my podcasts are getting cut in half.

My podcasts artwork is no longer appearing and my podcasts are getting cut in half.

Your podcast image appears in the Store OK: there is no embedded image in the media file.
When I subscribed your top image downloaded and played perfectly well. I couldn't get the top episode in the Store to play.
When I entered the URL for the top episode in the feed into Safari, instead of playing withing Safari as it should do there was a double redirect (too fast for me to note the URLs) and the file then downloaded rather than playing. This sort of thing is very likely to upset the Store: you should ideally provide a direct URL to the media file with no redirects, and it should play in Safari rather than force a download.

Song and podcast artwork misaligned....

My album artwork (including podcast artwork) is jumbled up across artists and even podcasts on both my iphone and ipod (eg, artwork for Gotye is displayed with Elbow is playing). However, when viewing the songs in iTunes, all the artwork in within itunes they all look fine. Any suggestions on how to solve this?

I was mistaken. I thought the software update got the podcasts out of songs too (it removed the Video Podcasts, TV Shows and Movies from "Songs"). All audio content still shows up under songs (I just checked on my iPod).
You will need to...
Send Apple Your Feedback
And tell them that audio podcasts shouldn't show up there (under songs).
There isn't anything you can do for now
btabz

Excise Invoice number for Domestic and Exports

Hi Friends,
MyClient is having two types of excise invoices. One is Local and another is Export.
The local excise invoices take numbers from the local number range object J_1IEXCLOC; and even the export excise invoices take numbers from the local number range object J_1IEXCLOC.
i.e they have the continuation of numbers for domestic and exports.
Ex: If the domestic excise number is 091111010 then export excise invoice no is 091111011.
They have not maintained number ranges for export range object J_1IEXCEXP(w.r.t any seriesgroup).
And there is no tick for Use Local Number Range in Export Excise Invoice also.
I want to know how this can be happen.
Pl help me in this regard.

Hi Azeez,
Go to IMG, Tax on goods movements, India, Outgoing excise invoices, Maintain defult Excise Groups and Series Groups.
Here check the Sales Area, shipping point, plant, Excise group and Series group determination. It is here that you defferentiate for which series group you are using which sales area and plant. Once you identify this, go to T code J1i9, give the valid object and check the number range assigned to the series group.
Thanks
Nawazz

Extract work order data from r/3 system in flat file(csv)and export to BI

Hi,
I am new in interface.
I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
Please provide the step-by-step proces to do this.
Thanks
Suchi
Moderator message: anything else? please work yourself first on your requirement.
Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael

How to enable Validate and Export in FDM task

Hi everyone
I am working with setting up an FDM Task to Import, Validate and Export data to HFM.
The Task is able to import data to FDM, but I cannot make the process start the Validate and Export functions. If I do the process manually, then data is imported to HFM succesfully.
Am I missing something in the scripts or do I need to enable some feature in FDM?
Action Script:
Sub BatchLoadLedgerTrans()
'Declare Local Variables
Dim lngProcessLevel
Dim strDelimiter
Dim blnAutoMapCorrect
'Initialize Variables
lngProcessLevel = 50 'Import
strDelimiter = "_"
blnAutoMapCorrect = 0
'Create the file collection
Set BATCHENG.PcolFiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter), FileName)
'Execute a Standard Serial batch
BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
End Sub Integration Script:
Function LedgerTrans_EDW_to_HFM(strLoc, lngCatKey, dblPerKey, strWorkTableName)
Dim objSS 'ADODB.Connection
Dim strSQL 'SQL String
Dim rs 'Recordset
Dim rsAppend 'tTB table append rs Object
'Initialize objects
Set cnSS = CreateObject("ADODB.Connection")
Set rs = CreateObject("ADODB.Recordset")
Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)
cnss.open "Provider=SQLNCLI11; Data Source=10.250.200.10; Initial Catalog=EDW; User ID=FDM-user; Password=MyPassword"
cnss.CommandTimeout = 0
'Create query String - VIEW
strSQL = "Select * "
strSQL = strSQL & "FROM EDW.hfm.ledgertranstable "
'Get data
rs.Open strSQL, cnSS
'Check For data
If rs.bof And rs.eof Then
RES.PlngActionType = 2
RES.PstrActionValue = "No Records To load!"
Exit Function
End If
'Loop through records And append To tTB table In location’s DB
If Not rs.bof And Not rs.eof Then
Do While Not rs.eof
rsAppend.AddNew
rsAppend.Fields("PartitionKey") = RES.PlngLocKey
rsAppend.Fields("CatKey") = lngCatKey ' PlngCatKey
rsAppend.Fields("PeriodKey") = dblPerKey ' PlngCatKey
rsAppend.Fields("DataView") = "YTD"
rsAppend.Fields("CalcAcctType") = 9
rsAppend.Fields("Account") = rs.fields(2).Value
rsAppend.Fields("Desc1") = rs.fields(2).Value
rsAppend.Fields("Entity") = rs.fields(6).Value
rsAppend.Fields("ICP") = rs.fields(8).Value
rsAppend.Fields("Amount") = rs.fields(14).Value
rsAppend.Fields("UD1") = rs.fields(5).Value
rsAppend.Fields("UD2") = rs.fields(9).Value
rsAppend.Fields("UD3") = rs.fields(10).Value
rsAppend.Fields("UD4") = rs.fields(7).Value
rsAppend.Fields("UD5") = rs.fields(13).Value
rsAppend.Update
rs.movenext
Loop
End If
'Records loaded
RES.PlngActionType = 6
RES.PstrActionValue = "SQL Import successful!"
'Assign Return value
LedgerTrans_EDW_to_HFM = True
End Function Best regards
Frederik
Edited by: Frederik Andersen on Jun 1, 2013 1:32 AM

Found the solution.
The variable lngProcessLevel should be set to "12" to execute the full Import, Validate and Export.
Best regards
Frederik

Import and Export in 4.6b

Hi All,
I have a syntax regarding Import and Export statements which are not working in 4.6b. Below is the statement.
IMPORT ID = (Internal Table) FROM DATA BUFFER ( String Variable ).
EXPORT ID = (Internal Table) TO DATA BUFFER ( String Variable ).
What can we have alternate to above statements ?
Actually I need to transfer or export some internal table content to String and Import the same data from string.
I am looking perticularly about buffer only. If not that what can we have alternate to that ?
Thanks,
Ram

Hi
You can try to use Field symbols also, for example
you need to code in the target program.
field-symbols <fs_itab> type standard table.
assign '(PROGRAMNAME)ITAB[]' TO <FS_ITAB>.
example, i did this in user exit
assign '(SAPMV50A)XLIPS[]' to <FS_ITAB>.
if <FS_ITAB> is assigned.
code will continue
make sure program name is in capital letters.
Regards
Madhan

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

My podcast artwork is not showing up... please help!

Hi there. I have submitted my podcast to iTunes and received the email almost a week ago that it was accepted. It is showing up in iTunes, but the artwork is not showing up and I have no clue what to do to make it show up properly.
Here is my xml feed link:
http://www.pastor2youth.com/videos/Fearfully_and_Wonderfully_Made.xml
I would GREATLY appreciate any help that anyone could give me on this as I have exhausted everything I know to do to try and get the artwork to show up.
Thanks!!!

The image is correctly referenced in the feed, and there is a file at that address. It's not unusual for it to take several days after a podcast first appears in the Store before the image appears, so it's just a matter of waiting.

Any example to import and export itab to function module

hi all,
as the table parameter in function module is obsolete, please advise an example on how to pass in an internal table
and return back the result in an internal table as well.
for example, i have itab1 and itab2. By using table parameters i got the following code. Please advise alternative way by using import and export.
""Local Interface:
*" TABLES
*"      itab1 STRUCTURE Zitab1
*"      itab2 STRUCTURE Zitab2
loop at itab1 into wa_itab.
**do some logic here to assign value to itab2 and return.
wa_itab2-a = xxx .
wa_itab2-b = xxx.
append wa_itab2 to itab2.
endloop.
thank you.

hi,
suppose you have two structure name struc1 and struc2.
create table type zitab1 & 2 for both.
please do the following:
""Local Interface:
*" IMPORTING
*"     VALUE(itab1) TYPE Zitab1
*" EXPORTING
*"     VALUE(itab2) TYPE Zitab2
you can avoid to use the obsolete table parameters as well as LIKE in function module creation.
cheers

How do I get podcast artwork to appear in iTunes?

Hi,
I am having difficulty getting podcast artwork that appears in the podcast directory on the iTunes store to appear in iTunes after I've subscribed. For example, if I choose NBC's "Meet the Press (audio)", the directory shows a cover image for the podcast. However, when I subscribe, no cover art appears on my iTunes or my iPod Nano (latest generation). When I click on the podcat image and then select "Get Album Artwork" (either by ctrl+click on the mouse, or the "Advanced" menu), nothing happens.
What might be causing this to happen, and what do I do?
I am using iTunes 10.6.1 (7) on an iMac running Mac OS 10.6.8.
Thanks in advance for any help you could provide!
Tony

Hi Roger,
Thanks for your reply and my apologies for taking longer than hoped to respond. The problem I'm having is that the cover art shows on my iPad (e.g. for "Meet the Press", a weekly American news programme), but it doesn't in either iTunes on my Mac or (consequently) my iPod Nano.
I'm not sure I understand why the image, if it's embedded, would appear on one device but not on another for iTunes?
I tried going to the iTunes store and dragging the cover art across to iTunes on my Mac, but it only brings the link across (rather than the image).
Any help you could provide would be most appreciated!
Thanks and best regards,
Tony

How to post podcast artwork in iTunes with libsyn

Quick question..
How do I get MY image to show up in the podcast page in iTunes? I'm talking about the page that shows when my podcast is displayed. There is just a default image there right now, and I would like to change it to an image of my choosing. I've gone into the setting tab in libsyn, and added an image to the iTunes submission tab, but the image fails to show. I'm assuming this is a problem with the rss feed, because no image shows in a few other podcast directories.
How do I make an image show up in the iTunes podcast artwork area? How do I do this using libsyn as my host?
Thanks

The iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the center of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
tt2

Blank second page and export error in Crystal 10 Web Report Viewer

We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer. When they view a report that is 12 pages, the first page appears OK. When they click Next to go to the Next page, the page shows as blank. The second issue is that If they try to export the .rpt they get this error:
Exception Details: System.Runtime.InteropServices.COMException: Access denied Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack trace:
[COMException (0x80000220): Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
      CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export (ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +133
[LoadSaveReportException: Access denied.
Error in File UNKNOWN.RPT:
Access to report file denied. Another program may be using it.]
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) +661
CrystalDecisions.ReportSource.ErrorReportSourceBase.ExportToStream(ExportRequestContext reqContext) +186
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExplortRequestContext reqContext) +20
I can view and export the same .rpt file in my environment without any issues. Has anyone seen these errors before and have any ideas on how to resolve them? They seem to be environment related since I can view the same report OK on my machine.
This is using Crystal 10 on Windows Server 2003.

Hello,
This sounds like a postback issue. Does your application handle postback by putting the report in session?
There is a [sample|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/CrystalReports_dotNET_SDK/crsdk_samples_aspx/data/crsdk_net_tutorials_115_en.zip] to look at on our website. It was created with Crystal Reports XI R2 and Visual Studio .NET but the code will be the same.
The basic code is:
Private crReportDocument As ReportDocument
    Private Sub ConfigureCrystalReports()
        'Check to see if the report exists
        If (Session("crReportDocument") Is Nothing) Then
            crReportDocument = New ReportDocument()
            crReportDocument.Load("C:\1 - Report\CRParams.rpt")
            'Do anything required for the report
            'Logon to the database
            'Pass parameters
            'Assign the report into Session
            Session("crReportDocument") = crReportDocument
            'Assign the report to the Viewer
            myCrystalReportViewer.ReportSource = crReportDocument
        Else
            'Assign the report that is stored in Session to the report instance.
            crReportDocument = CType(Session("crReportDocument"), ReportDocument)
            'Assign the report to the Viewer for each postback
            myCrystalReportViewer.ReportSource = crReportDocument
        End If
    End Sub
Elaine

Missing podcast artwork

I use the apple podcast app on my iPhone to listen to podcasts. The artwork has disappeared for my Steve Austin podcast (it has always shown up as has all of my other podcasts artwork since I got the app). is any body experiencing this and what can I do to get the artwork to show up again? I never use iTunes on my laptop to manage my podcasts I have always downloaded them via my iPhone.

I had the same problem. Just deleted the podcasts app and reinstalled it (all subscriptions and content was maintained) waiting a few minutes and voila, it was fixed.

Updating my podcast artwork?

Hi there,
We've recently updated our podcast artwork but not sure how to change it on iTunes?
Our podcast is here: https://itunes.apple.com/gb/podcast/picturehouse-podcast/id393128786?mt=2
Our old artwork is hosted here: http://podcasts.simplicityphotography.co.uk/picturehouse_artwork.jpg
<itunes:image href="http://podcasts.simplicityphotography.co.uk/picturehouse_artwork.jpg" />
Do I simply need to upload my new artwork to a hosting site and drop the link in? Will iTunes pull in the new artwork?
Would it matter if I uploaded it to a different server to our podcast files?
Cheers,
Sam

Do I simply need to upload my new artwork to a hosting site and drop the link in? Will iTunes pull in the new artwork?
Yes; but you must give the new image a new filename or the Store won't recorgnize that it's changed. It will take some days for the new image to appear in the Store.
Would it matter if I uploaded it to a different server to our podcast files?
No. Obviously the URL must always be a full one (as it is at present)

Assigning and exporting podcast artwork

Similar Messages

Maybe you are looking for