Assigning Batch search strategy to material-batch key
I am facing one strange problem. I am creating process order in COR1 for my finished goods FIN1. I have maintained BOM for FIN1 & assigned Semi finished goods SEM1, SEM2 as a BOM component.
I have maintained enough stock of SEM1in batches. Now i am releasing my process order. For component SEM1, the system is automatically assigning the batch number
I have noticed in my process order, for component SEM1 has 2 items, the batch key is as "2" (sytem automatically sets this value) but also has ths same component item, the batch key is as "1", required quantity is 0
Why? What is the importance of this "Batch Key"?
Please guide me
Thanks
lee
Dear,
You have define Batch Strategy with number of splits "say 99", so that system will allow 99 splits for a component while Batch determination.
This is a definition basically for a combination of condition type and access sequence in COB1 you can check in COB3
Suppose materail
SEM1 required quantity is 100 and you have three batches say 50, 70 20,
So system will pick up two batches batch key is as "2"
If requirement quantity is more than 120 then system will paick up three batches and batch key will be "3"
SEM2 there is no requirement of quantity so system showing the batch key is as "1"
Please refer my reply from this thread,
Material Availability check
Hope clear to you.
Regards,
R.Brahmankar
Similar Messages
-
Batch search strategy in WM material staging
Hello all,
I have a issue of batch determination when I do WM material staging through transaction LP12 & further TO creation through transaction LB13.
We have set a batch search strategy in transaction LS51 for WM/Movement level i.e. for WM02. We have defined a search strategy for movt. type 319 with criteria as Shelf life expiry date is >1 day & defined a sort rule as ascending order. Hence our expectation is that system should automatically search for available material batch with First shelf life expiration date. However, we found that the system is picking up the batch which is having shelf expiration date later than the batch available in system which is having early expiry date. I am unable to trace the cause for this . As I know the batch search strategy for WM TO related setting is in LS51 & we have already maintained the same as explained earlier.
Can anybody help me in resolving this issue? Do you know anything more specific settings required to fix up this problem.
Thanks much in advance for your kind help in this regard.
Parag K.You need to configure WM Stringent FIFO strategy forstock removal in this scenario. Other Strategies for stock removal don't always guarantee that stock is picked in the order of nearest SLED. Please check
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f845944afa11d182b90000e829fbfe/frameset.htm -
Batch search strategy based on goods receipt date
Hello,
Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
Thanks a lot
Thanks!
Best Regards
SrwHi
If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type 023
Then assign this class in Material Master Classification view..
Make sure in Material master, Purchasing view...you have activated Batch management active check box....
Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
Then Create sort sequence in T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
Now you do your regular procedings.....the material Batch will be searched based on GR Date...
Reward if useful
Regards
S.Baskaran -
How do I get the Batch Search Strategy Type in an ABAP program?
Hi Experts,
I have a requirement to filter the Batch Search Strategy Type in a BADI. For example, I have a Strategy Type ZD01 which is a Customer/Material combination. This has been created and checking VCH3 confirms that.
For example, I am implementing BADI VB_BD_SELECTION~PRESELECT_BATCHES and will put the filtering in there. For example, I go to transaction VL01n then create outbound delivery with order reference, in the PRESELECT_BATCHES portion, I will do a filtering that if Batch Search Strategy Type = ZD01, then do some code.
My problem is, I don't know how to retrieve the Strategy Type. I can use the parameters I_KOMKH-KUNNR (Customer) and I_KOMPH-MATNR (Material) of method PRESELECT_BATCHES to retrieve the Strategy Type but I don't know how.
Any tips?Hi Experts,
I have a requirement to filter the Batch Search Strategy Type in a BADI. For example, I have a Strategy Type ZD01 which is a Customer/Material combination. This has been created and checking VCH3 confirms that.
For example, I am implementing BADI VB_BD_SELECTION~PRESELECT_BATCHES and will put the filtering in there. For example, I go to transaction VL01n then create outbound delivery with order reference, in the PRESELECT_BATCHES portion, I will do a filtering that if Batch Search Strategy Type = ZD01, then do some code.
My problem is, I don't know how to retrieve the Strategy Type. I can use the parameters I_KOMKH-KUNNR (Customer) and I_KOMPH-MATNR (Material) of method PRESELECT_BATCHES to retrieve the Strategy Type but I don't know how.
Any tips? -
Batch Search strategy -"No search Strategy could be found "
Hi
I have a typical problem while perfoming GI through pick list (co27).I have given the Production Order No and standard pick profile (00002) , it was taking me to batch determination .While clicking on the batch detemination , it is giving me the above massages : No search Strategy could be found .When I am exploring in the "Strategy Information " , it is not showing me any Sort Rule " SORT_BY_Batch" .I want this to be populated by defauly while clikcing on the Strategy Info.
Can any body give an idea .
Regards
JiaHi Jiaul,
I got your problem.
U r tyring to do batch determination for pick list. But u have defined the batch search strategy in COB1 which is for batch determination for process orders ( in component overview).
U need to create the search strategy using MBC1 (use strategy type ME01 , Plant, material, mvmnt type). This triggers the batch determination in inventory management, which is ur requirement.
Maintain the search strategy for thsi combination ( give the movement type ( for ex. 261) which will be used while u execute the pick list)
Please get back after trying out this.
Thanks & regards
Mahesh
Edited by: Mahesh Babu MG on Jan 30, 2008 10:00 PM -
Hi Experts,
I have configured Batch Search Strategy for Transfer posting of consigh goods (311K).
The Batch search is working fine for one plant while it is not for another plant. The msg. says 'The CLASS does not contain any Selection criteria'.
This same CLASS is proposing the batches for the first plant. the selection criteria is 'Consign Stock - type K'
Please advise this is very urgent..
Thanks in advance,
ManjuHi,
Goto OMCE transaction check the batch level here check the batch level where it is activated whether is it at Plant level or Material level or Client level.
rgds
Chidanand -
BAPI for the transaction VCH1 and VCH2 (Batch Search strategy)
Hi Experts,
I need to create a new condition record or change a condition records using the transactions VCH1 and VCH2 respectively.
But BDC recording should not be used at any cost (acc to Client).
So next go for me is to search for a BAPI or any Function modules..
Can anyone please help me in this regard.....
Has anyone worked with this transactions before...
waiting for the replys
RajivHi Rajiv,
I have a similar requirement as yours. Could you please let me know if you found any function modules or bapi's to create batch search strategy.
Thanks in advance.
Manohar Dubbaka. -
Remove Search strategy in MBC2- Batch management
Dear All,
I want to remove the search strategy assigned in the MBC2 for a particular movement type.Though i have deleted the sort sequence and removed the strategy in MBC2,when i am uploading the stock with 561 goods movement it takes me to the classification window.I want to remove this strategy.
Where else do I need to change the settings.
Thanks to all in advance.
Manisha ParulekarHi Manisha,
I think you are trying to achieve different thing through different transaction. You are doing 561 which is initial stock upload. If you create a batch of material through 561 and it has class and characteristics assigned to it it will take you to classification view and expect you to fill values of characteristics.
Why you don't need this view/screen? If you don't need class go ahead and delete class from the material master and you should be all set.
However if you need class and then you are deleting it from material master for initial stock it has a lots of other implications like your batch will be inconsistent etc. Hence request you to evaluate about this before taking a call.
Hope this helps.
Thanks
Ashutosh -
Hi All experts,
When i go to LT04 and create transfer order i'm getting error saying
"No batches were selected during the batch search".Any one knows the reason for this .Please guide.Thanks in advance
naikLike sampath has suggested, you have to find out the strategy type you are using for your batch determination strategy and maintain in tht system via tocde LS51thenonly system will find out the batch or of you don't want the batch automatic strategy for this movement then you have to remove from the config for thi mtype.
-
How can mass create batch classification for many material batches? ?
Hi Experts,
In our system , there are so many material batches which have not been classified,see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack -
Strategy Types in Batch Search Strategy (Process Order)
Hi Expert,
What are the difference between the strategy types - Order type/Plant/Mat, Order type/Plant, Prod Material?
For Order type/Plant combination- If my criteria is to do automatic batch determination at process order release against the sort rule characteristics (LOBM_LWERT) GR received date. I maintained LOBM_LWERT in all material classes, now in selection criteria which class I will choose as different materials contain different class in the class type 023.
I am confused.
In case of Order type/Plant/mat- number of master data is huge.
Pls suggest
KrishGot answer.closed
-
Hello Expert,
We have a rise in the number of COGI errors in our client plants.when we upgrade our system for R/31 version 4.6 to ECC 6.0. we have always have COGI error for certain material component when the confirmation came across even though we have several different batches on inventory.Confirming a production order it would select the oldest batch and consume it but if the oldest batch did not have enough stock to fulfill the amount it would go to the next oldest batch. Could have been changes happen in the functionality behind in my client batch strategy? how could i fix and located this problem? and can it also affect when ever we do material substitution in BOM component?
Please guide and help.
Thanks
RyanHy Ryan,
BATCH MANAGEMENT-BAckFLUSH,
Your Materials are Back flush that means you are doing goods issue with Confirmation.
Now Batch Determination for Components can be done via 2 ways
- as Mr. Brahmankar said MBC1 (Plant , Material / Material Type , Movement type) for this you have to do Batch Determination in Goods Movement screen of Confirmation.
- Secondly with COB1. In this you have to do Batch Determination in Order itself.
Now first rectify which strategy you are using currently.Whar ever it is COB1 or MBC1.My doubt is if you are using Combination with Material (Not Material Type) in that case you have to update your strategy with all the Materials for which Batch Detrmination is required.I guess rest of the settings are OK because you had already clarifies that for some of material it works.
Regards,
Dhaval -
hi,
As per my process order requirement, i converted transfer requirement in to transfer order in warehouse and confirm the transfer order. During conversion the system picks as batch as per FIFO. If there is only one batch there is no problem. if there is more than one batch then, there is a problem during goods issue
When i am doing goods issue for my process order, system picks only one batch. For other batch i have to do one more time goods issue. I didnot do any stock determination during goods issue. What may be problem.Thanks for your reply.
I already maintain batch split as 999. still it is not taking.
I checked strategy type also. what may be the reason.
kindly explain.
sathish. R -
Batch Search While Creating Sales Order
Hello Experts,
I tryed to assign the batch in sales order with std item cat TAN ( Redio button ticked for Item cat TAN in Automatic Batch determination for SD in SPRO) but system shows the following msg
The system did not find any selection criteria for material HOWKINS_COOKER, batch TESTVD
Message no. V2097
Procedure
Check the selection criteria and, if necessary, change the batch search strategy.
Please help me in this regard.
SAP PPcreate a batch search strategy in VCH1 for the material ( selection condition SD01)
if you want to sort with FIFO LIFO, then create a sort rule in CU70 and assign in batch search strategy -
Batch selection strategy not working properly
Hi ,
I have an issue with automtaic batch determination
The header item contains 10 component items, out of 10 components I am facing issue with only one component so that I can consider this is not a configuration issue and might be a master data issue
Scenario :
process order created , released and after material staging saved , then the transfer order created automaticallyfor component items . the particular one component having 3 batches .. In the material master the total sheif life time maintained as 1095 days. for the first batch mfg date 01/01/2010 the system calculates the SLED 31/12/2010 , and the remaining 2 batches expires during 08/09/2013 .logically the system should pick the first batch which one expires first ( FEFO ). but it picking the others
If i change the date of mfg and save it , after that if i create a process order it picks the batch correctly
but if i put back the earlier dates in mfg date after that it picking the correct batch only
My question is why the batch sreach strategy is picking the differnt batches for same dates , whether the batch number get stored if we change manually
pls suggest and give some hints what are the points I need to checkDear
Some of the check points may be :
1.Investigate the Batch management -SLED/FIFO : Batch management - FEFO
2.Please check whther any Batch search strategy is maintined for th component in MBC2 or in COB2 and check the sort rule of the batch determination : Re: Error In Batch Determination
3.Create a batch search strategy using selection criteria and include characteristics LOBM_RLZ (Remaining shelf life) in the class. Check the oss note 33396 to calculate this characteristics automatically.You can enter selection criteria in something like >= 0, for example.
4.Check the Period Indicator for SLED and Rounding values in Plant Data 1/Storage Loaction 1 in MMR for the particual compoenets .
5.Check the settings for SLED in Material master material/sto loc data1 and Log-batch management-exparation date check SLED settings & there is a user exit through we can configure the date check. Check in OMJ5 here you have to define check with plant and move tpe wise
Regards
JH
Maybe you are looking for
-
I open time machine preferences and only see the backup for the laptop. Have no idea what to do at this point. The time machine was backing up my iMac just fine until it stopped working.
-
Printing to PDF using Acrobat X Pro - Cannot figure it out!
I do not have the option to print to pdf and cannot figure out how to perform this function. Following the user guides there should be an option under file > Print > advanced > print to pdf However under the advanced options i do not have the option
-
Color Laserjet 2600n: only red not printing properly, washed out on the left side
Hello, Our HP2600 Color Laser printer does not print well whatever includes the color red. On a portrait layout the 2" from the left are washed out in red. We only use new HP cartridges, clean the machine regularly. Error happens with different compu
-
Big Mistake, how do I fix it.
Peace and blessings, I tried to install Tiger from my Mac book into my G4 flat screen. I thought it was fine since they were both owned by me, as it turns out they're not compatable. My G4 is frozen. It starts out then after the apple appears its fre
-
Is a factory restore, out of box worth it? Make iMac faster than is now?
I still consider myself new to iMac and OSX coming from PCs. I have a 2007 Aluminium Core 2 Duo 2Ghz, 2Gb RAM with Snow Leopard and iLife 09 on. I am just finding now after 3 years that I'm getting a lot of "beach balls", general slow down. I have a