Assigning Control profile in Overall profile for capacity planning

Dear all Hi,
While creating the order iam getting the error as contrrol profile attached to overall profile is not suitable.
Please can you help me in finding in which transaction do we assign control profile to over all profile.
Thanks in advance.

run t-code OPD0 and make adjustment for your overall profile (change a control profile)

Similar Messages

  • Setting needed for Capacity Planning.

    Hi PP Gurus,
    I want to know what setting we have to do for capacity planning.
    what I know is:
    1. W/C should be set for finite scheduling.
    2. In scheduling parameters for process order tick "Generate capacity Requirement".
    This both setting are made in my scenario, but it is'nt loading the work center fot that week.
    Any other setting nedded?
    Thanks, in advance.

    Dear ,
    You need to have following set up at basic level frist before you perfomr the capacity requirement planning  :
    1.In OPKP-Define Production Scheduling parameter -Availability check -Confirm Capacity and also Finite Scheduling chekc box ticked .
    2.In OPU3/OPU5-Define Scheduling Parametesr -you should mark the following
    1.Automatic Scheduling check box should be marked
    2.Scheduling Log check box should be marked -generate in case there is a scheduling error due to capacity over load .
    3.Scedulinga and Generate Capcity should be ticked .
    3.In OPJK Imaintain check capacity with SAPSFCG013 overall profile and set indicator -1 -Release Order -by user decision if capacity is insufficient
    4.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
    5.Routing - enter the values for the standard values. Use control key with scheduling and CRP activated .
    6. OPD0 and have the following set up  : Overall profile : SFAPSFC015 --Inside the over all profile I have the following set up
    1.Selection Profile -SAPSFCS013 SFC: Order view, standard overview
    2.Control Profile : SAP___C004 : Gen Capacity Availability Check for 1.5 months
    3.Time Profile : SAP___Z006 : Gen Capacity Availability Check for 1.5 months
    4.Evalution Profile : SAPSFCA013 : Gen Capacity Availability Chek =3.0D
    5.Strategy Profile : SAPSFCVER1-Gen Capacity availability Check
    6.Period Profile : SAP___P001 -Weekly period
    7.List Profile : SAPSFCI001-Production Planing
    Check all of them in place .Then you can go ahead with Capacity Req.Planning -Evalution and Leveling -CM21/CM22/CM05/CM07  etc.
    Refere the below theread for farther reference :
    Capacity problem in production order
    capacity planning
    Hope this will be useful .
    Regards
    JH

  • Any good table for Capacity Planning?

    HI all,
    Is there any table for capacity planning?
    we want to do some development to get capacity requirements data for each work center, don't like using CM01.
    Thanks!
    Harvey

    Dear
    Please find below SAP tables for CRP :
    CRHD         Workcenter Header Data
    CRCA         Workcenter Capacity Allocation
    CRCO         Workcenter Cost Center Assignment
    CRHH          Hierarchy Header
    CRHS           Hierarchy Structure
    CRTX          Workcenter Text
    KAKO         Capacity Header
    KAZY          Intervals of Capacity
    Regards
    JH

  • Blocking of work center capacity for capacity planning

    How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
    i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?

    Hi,
    In capacity header details screen not exactly as "can be used for capacity evaluation " but
    "relevent to finite sceduling"
    "can be used for several operations"
    "long term planning"
    these all indicators you can deflag this and check the results ,it may helpful to you.

  • Tables for capacity planning?

    HI all,
    Is there any table for capacity planning?
    we want to do some development to get capacity requirements data for each work center, don't like using CM01.
    Thanks!
    Harvey

    >
    harvey wu wrote:
    > HI all,
    >
    > Is there any table for capacity planning?
    > we want to do some development to get capacity requirements data for each work center, don't like using CM01.
    > Thanks!
    >
    > Harvey
    Hi Harvey,
    Kindly check if the Below tables satisfy ur requriement
    KBED      Capacity Requirements Records
    KBEZ      Add. data for table KBED (for indiv. capacities/sp
    KBKO      Header Record for Capacity Requirements
    Reg
    Dsk

  • Selection profile sets for capacity planning

    Hi,
    Could you please explain me in details about different sets in selection profiles configuration (work center set, order set, capacity category set, initial set) thorugh OPA2  and how they are related to sets in OPD1 configuration (Object, filter sets).
    Does these sets will effect capacity availability check calculations or they only for different display options for user.
    Please provide if there is any detailed document available since I have a problem where CM01 list is not matching with overall profile used for capacity availability check while creating orders.

    run t-code OPD0 and make adjustment for your overall profile (change a control profile)

  • Bandwidth Utilization Avg or Max for capacity Planning best practice

    Hello All - This is a conceptual or Non-Cisco product question. Hope you can help me to get this best industry practice
    I am doing a Capacity planning for the WAN Link Bandwidth. To study the last month bandwidth utilization in the MRTG graph, i am seeing  two values
    Average
    Maximum.
    To measure how much bandwidth my remote location is using which value i have to use. Average or Max?
    Average is always low eg. 20% to 30%
    Maximum is continuous 100% for 3 hour in 3 different intervals in a day and become 60% in rest of the day
    What is the best practice followed in the networking industry to derive the upgrade size of the bandwidth by using the Utilization graph
    regards,
    SAIRAM

    Hello.
    It makes no sense to use average during whole day (or a month), as you do the capacity management to avoid business impact due to link utilization; and average does not help you to catch is the end-users experience any performance issues.
    Typically your capacity management algorithm/thresholds are dependent on traffic patterns. As theses are really different cases if you run SAP+VoIP vs. youtube+Outlook. If you have any business critical traffic, you need to deploy QoS (unless you are allowed to increase link bandwidth infinitely).
    So, I would recommend to use 95-percentile of maximum values on 5-15 minutes interval (your algorithm/thresholds will be really sensitive to pooling interval, so choose it carefully). After to collect baseline (for a month or so)  - go and ask users about their experience and try to correlate poor experience with traffic bursts. This would help you to define thresholds for link upgrade triggers.
    PS: proactive capacity management includes link planning for new sites and their impact on existing links (in HQ and other spoke).
    PS2: also I would recommend to separately track utilization during business hours (business traffic) and non-business (service or backup traffic).

  • EXtractor for Capacity planning

    HI, I cant find any extractor for manufacturing capacity planning, data are stored in tables KBED + KBKO  on R3 side. Have You any advice
    Thanx

    Hi,
    Check with 2LIS_04_* datasources.
    Thanks
    Reddy

  • Pp and pm integration for capacity planning

    Dear ALL,
    Just now i started integration testing between pp and pm.
    As we know PM equipment is work centre for PP.Suppose there is 1 machine MAC-1 for which i created maint. order  also i ticked Sys. condition in MO and by using  the same  machine , Prd.dept is created Prod. Order.
    But as per std. scenario , SAP should show that this  capacity is not available for pp but in our case it is not happening and capacity is available  here.
    I would like to know is there any thing  missing from my side.
    Awaiting for your valuable suggesation.

    In Equiment Bom, enter PP workcenter. When you make MO it will not give you an alert. But while your leveling your capacity MO will appears that Work Centre will be on Maintenance from --- to date.
    If it helps, kindly give points.
    Regards,
    RM

  • Precision for Capacity Planning for Response Group Lync 2010

    Hi,
    does anyone have
    information on the following points:
    Concurrent calls connected to IVR or MoH
    480
    60 --> I think that each FE can support 60 simultaneous calls on the MOH
    Concurrent anonymous sessions (without IM)
    224
    28 --> I think that each FE can support 28 simultaneous calls on different RGS/agents
    Active agents (formal and informal)
    1200
    1200 - -> It's the maximum of actives agents for RGS. But does I have to count 3 connections if a person is active for 3 RGS?
    Thanks for your help
    Marc

    Concurrent calls connected to IVR or MoH > 480 that mean per enterprise pool it support 480 simultaneous call to IVR but enterprise pool must contain at least 8 Front End.
    Concurrent anonymous sessions (without IM) > 224 same as previous, that mean enterprise pool support 224 simultaneous call on different agent.
    Active agents (formal and informal) > 1200, It's the maximum of actives agents for RGS and yes, you will have 3 connection for 3 RGS.
    Each hunt group is associated with a different Response Group application queue, but each queue is associated with the same agent group comprised of three agents. The total number of possible active agents on this Enterprise Edition pool is three (1 agent
    group x 3 unique agents in that group).
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg412754.aspx
    http://blogs.technet.com/b/nexthop/archive/2012/09/24/lync-server-2010-response-group-application-frequently-asked-questions.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Question for Capacity Planning

    We are planning a large expansion of users and regions and therefore, data in our application. I am trying to figure the most important items that need to be covered for this move from an oracle architecture standpoint. So far I have:
    # of users currently connect
    # of new future users
    # of current transactions per day
    These should help with things like # of processes and cursors and PGA size.
    I cant seem to find any good documenation on data in oracle to review to try to best guestimate parameters that need to be changed. If someone can point me in the right direction or maybe give me some ideas of other things I should be looking at, it would be much appreciated
    Thanks

    I cant seem to find any good documenation on data in oracle to review to try to best guestimate parameters that need to be changed.Maybe because this doesn't really exist ...
    See following AskTom thread: http://asktom.oracle.com/pls/ask/f?p=4950:8:12270935817190372191::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:14258091776835
    and Oracle9i Database Performance Planning: http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96532/toc.htm

  • Colour Coding for capacity planning

    Hello Everyone,
    Please tell me is there any way where we can show different colours in CM25 transaction.
    means my orders are showing in red colour lets say if my order crosses the finsh date of my last operation is should show in different colur..?
    is it possible in any config setting or do i need to go for development.
    Best Regards,
    Ramansingh Thakur

    Hi,
    thanks for your quick response
    Lets say if my production order quantity is showing in red colour now my client wants that watever quantity is confirmed it should show in green colour.
    is it possible..??
    Best Regards,
    Ramansingh THakur

  • Configuring profiles in CAPACITY PLANNING (CM07)

    We need to configure a profile in CM07 which should be similar to CM01 but only should pick up released orders (PM orders) and instead of 9 weeks we need data for 11 weeks. These are the major two differences that we need. Can you please let me know the steps to do it.
    Your help would be really helpful and appreciated.

    Hi,
    Regarding selection of data of 11 Weeks than 9 Weeks you can do the same using Option Profile using T.Code: OPA3 in customisation where in you can mention Start and End Date.
    Path SPRO - Production - Capacity Requirements Planning - Evaluvation - Profiles - Define options profile.
    You need to assign the new Option Profile in Overall Profile (OPA6).
    Regarding selection of only released orders I will check and confirm.
    With best regards
    Shankar.

  • CM01, 02, 03 and 04 List Selection in Overall Profile

    Does anyone know how to create a List Profile for CM01 u2026 CM4 to include in an evaluation profile so that when a user gets in the transaction, they see the predefined set of data? I already have an overall profile and an evaluation profile. Thanks.

    In OPA4 you can define the list profile and assign the same in overall profile in OPA6.

  • Capacity Planning for External Procurement Material

    Hi, I have the following requirements.
    MRP Scheduling is getting executed material level (material no, plant) with scheduling type 2 which means lead time scheduling using MD02 Transaction Code. This is works fine for the Inhouse Product. In order to achieve lead time the functional team has maintained the necessary routing/workcenter configs.
    The business needs the same functionality "Capacity requirements calculation" for the external procurement material. Business is willing to maintain routing/workcenter config.
    Currently standard program (MD02) is not considering the Capacity planning for the external Procurement material.
    Could you please suggest is it can be controlled through programming.
    Kindly suggest the function modules for Capacity Planning - materialwise, plantwise.
    Please suggest.
    Thanks
    Giri

    Hi Giri
        I think the requirement is not mentioned clearly. Capacity is required only if the material is assembled/produced in house.
    Anyway try this. Set the Procurement type to X in the MRP views in material master. You might have to define your custom material type so that it does not force the procurement type to F. Try the feature called "Quota arrangement". The idea is to define the material in such a way that it can be procured externally or produced in house. With quota arrangement you can say what % has to be bought and what % to be produced in house. If it is produced in house then you can have capacity requirements.
    Regards
    Pragnesh

Maybe you are looking for