Assigning different GB instruments to Korg nanopad?

Does anyone know how to assign different instruments to the pads on a nanopad. E.g can I assign Circuit Dialog (Synth Basics) and Pad #1 and Solo Star (Synth Leads) on Pad #2. Grateful for any help on this query. Thanks!

Similar Messages

Assigning different midi channels to Mainstage

Hello,
I'm trying to get Mainstage working with a midi accordion. For this to happen I need to be able to assign different midi channels to the different instruments I want i.e., piano for the right hand of the accordion would be midi channel 1, Double Bass for the left hand would be midi channel 2.
I've been looking through the manual and cant find a way to do it.
Does anyone know if it is possible?
Thanks
Angus

Thanks for the help! Here's a summary of the solution from the posts above:
Let's say you have a MIDI controller transmitting on more than one MIDI channel. Naturally you want to trigger different sounds on each MIDI channel. In my case, it's a Kurzweil MIDI keyboard/controller capable of 4 MIDI channels at once with split points and layers created in the MIDI performance setup.
My goal was to replace rack of MIDI modules with a MacBook running Mainstage (much easier to carry). I want to keep the MIDI setups in the keyboard and duplicate the multitimbral rack modules in Mainstage so I have a choice of taking either the rack or a laptop to the gig.
Here's what worked:
In the Mainstage layout tab I created 4 keyboards. each keyboard was set to the MIDI interface device and a unique MIDI channel. Each keyboard is named for its MIDI channel.
In the edit tab I created a single patch with multiple channel strips. I selected the first channel strip and assigned the sound I wanted in the channel strip itself. On the left side, in the channel strip inspector, I assigned the channel strip to one of the MIDI chanels (one of the keyboards I created in the layout tab).
Then on the right side at the upper right corner of the channel strip I hit the "+" to add a second channel strip to the same patch. I added the plug-ings I wanted and again in the inspector on the left I assigned it to one of the other channels. I created 4 channel strips in the patch.
The result was a multitimbral setup with piano, strings and sound effects on 4 different channels. All active at the same time but only sounding when I selected a MIDI performance in the controller that sends note data to these channels.
It worked very well at my gig last week. Still a couple of details to iron out, such as disabling volume control for certain channel strips.
Hope others find this helpful.
Carlos

How can we assign different colours to different records(line items) in alv

how can we assign different colours to different records(line items) in alv reporting?

Hi Friend,
Please see this SDN Wiki for setting the color in ALV :[http://wiki.sdn.sap.com/wiki/display/ABAP/ABAP-DevelopingInteractiveALVReportusing+OOABAP]
There are so many SDN Wiki's on this just try with search Alv Color display in SDN,
Regards,

Can you play two different MIDI instruments at the same time in Garageband?

Hi all,
I searched for a while but failed to find an answer so far: can Garageband allow you to play two tracks with two different midi instruments? When I plug my two keyboards, the 2 MIDI sources are recognized, but can only play notes on one track, not two different tracks! Is this a known limitation?
If Garageband can't play 2 midi instruments on 2 different tracks, I guess that leaves me with Logic Express...
Thanks a lot for any reply!
Alex

Correct. GB doesn't differentiate between midi channels, that's why you can't split them to two tracks (and GB only offers one recording channel for midi at a time).

Assigning different authorizations inside a role to different users

Hello,
Could someone please guide me to how can we assign different authorizations (authorizations field values) for an authorization object inside a role to different users; i.e. in the role maintenance transaction (pfcg) after we create a new role and add an authorization object to it, if this authorization object has several authorizations (authorization field values), and if I need to add two users to that role, how can I assign to one user an authorization different from that assigned to the other user ?
Thank you in advance.
Best regards.
Reda Khalifa
IT Department - Almansour Automotive Group - Egypt

Hi Reda,
That documentation complicates the subject slightly as it is talking about principles that are at a lower level than the usual role level.
We have 1 authorisation object - S_TRVL_BKS
Authorisations have been created for this object, called S_TRVL_CUS1 and S_TRVL_CUS2
In this context, an authorisation is an instance of an authorisation object that has been populated with data.
Before the profile generator you used to create authorisations (auth objects populated with data) and assign them to profiles which are then assigned to users.
In this example 2 profiles would be needed
Profile1: S_TRVL_CUS1 and S_TRVL_CUS2
Profile2: S_TRVL_CUS2
Miller would be assigned profile1, Meyers would be assigned profile2
The profile generator allows us to easily build authorisations and profiles and packages them up in a role. This way, we can assign transactions and authorisation objects into a role, populate the authorisations (which is what we do in the authorisations tab in the role) and automatically create the profile.
The example in the documentation is still valid because it requires 2 seperate authorisations (and therefore profiles and roles) to be assigned to different people. Unfortunately this is not explained very well in the documentation.
I hope that makes sense, roles are static and the permissions that they give do not vary dynamically. In BW we can use variables to do something similar and to some extent structural authorisations in HR work dynamically however this doesn't apply to R/3 or ECC. (it can be done in come cases but costs many, many £££/$$$'s)
Please let me know if you want me to elaborate further on this
Cheers
Alex

Assigning Different database governance limit for on demand versus scheduled report in BOEXI release 1

Post Author: Lucia Chan
CA Forum: WebIntelligence Reporting
I'm trying to use connection overrides for universe to assign different CPU processing limit for different group members on the database side. For those with low CPU limit setting, they would need to schedule their reports. I'm trying to find out if there is any way for the database to know if the report is on demand or scheduled. If scheduled, there should be no limit. I did a preliminary test with both on demand and scheduled WebIntelligence reports and both passed the wiReportServer.exe instead of wiJobServer.exe on the database side as AppName. Does anyone have any suggestion to look at that can differentiate the two?
Thank you.
Lucia Chan

All the mesages are dated "Aug 13" which is quite a few months ago ! I see no recent messages.
You have two CREATE CONTROLFILE calls and one alter database character set INTERNAL_CONVERT ZHS16GBK call.
Were these part of a Database Creation using DBCA (The Database Creation Assistant) ?
Hemant K Chitale

Business partner account assignment and G/L account assignment different

Hello Experts,
I am facing the issue of "Business partner account assignment and G/L account assignment different" Message no. FKKFMCHK039, while I am processing the Check lot (FP25).
Notable points are:
01) We are using the functionality of Interest, if customer pays the outstanding after due date, payment will post the interest on the outstanding;
02) I cross checked the account balance of business partners for which I am facing this problem, if payment amount is more then the outstanding balance then only we are facing this error, however under clarification processing if we post the payment with option of Post on account , payments are getting posted.
Looking for your valuable inputs.
Regards,
Anurag

Hello Experts,
Thanks for your support. However, I have regular interaction with SAP regarding above issue, and we have found there is program error, for which they have released the note number 2014364.
Regards,
Anurag sharma

How to assign different Message Type to different Doc. Types

Hi,
Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned.
Lucky

hi there
follow this path
spro - materials management - purchasing - messages - output cntrol - message types - define message types for p/o
then
spro - materials management - purchasing - messages - output cntrol - message determination schemas - define message determination schemas for purchase order
then
go to
mn04
give doc type - enter
enter partner role & other parametrs

Korg Nanopad not working in Garageband since upgrading to Lion

I've just upgraded to Lion and the new update to Garageband but have found that my Korg Nanopad's not working anymore. I've got a Nanokey and that's fine but not the Nanopad. I've Downloaded and installed all new drivers etc... but still no luck and strangely now I can only get Mac to recognise one midi input at one time where I used to get the ability to run two at once in Snow Leopard. I get the light on the unit and when I tap the XY pad, I see a little dot appear in Garagebands LED area but none of the pads are making sounds like they used to. Not sure if it's a note mapping issue but have hit the frustrated level now.
I'm hoping someone can shed some light as it used to be pluginplay goodness.
Many thanks.

Have you tried using the editor? to set the notes on the Nano? Maybe something in your set up got wiped in the updates?

Assigning different colors to different types of events

Is it possible to assign different colors to different types of events within the same calendar?
If so, how can that be done?
Thanks for your feedback.

Greetings,
The color choices in iCal are defined by calendar. So events in the same calendar will all be the same color. If you want them to be a different color, move them to a different calendar and assign the color of your choice to that calendar.
Hope that helps.

Assigning different IPs to applications running on same machine

I am working on case which needs 10 different threads of a client program with each thread having its own IP address. The problem is that these threads have to run on the same machine and they communicate to a common server (on a different machine) using the TCP/IP Sockets.Is there anyway thru which I can assign unique IP addresses to each of my client thread even through all of them happen to run on the same machine?

All my client threads connect to the server using
Socket sock = new Socket(ipAddr, portNum);
They are already binding themselves to different and unique ports on the client machine. All of them talk to the same server application running on a different machine. The server should identify the client threads by looking at their ip addresses. Now my question was, is there a way through which I can assign different IP addresses to my client threads ?

Assigning different behaviors to instances of a symbol

Hello all ,I want to assign different behavior (action
script) to different instances of (a) symbole ,what should I do?I
appreciate you .Sincerely Mohsena

yes it works ,thank you very much for your attention!
sincerely yours Mohsena

Asha 200 - How to assign different ringtones to SI...

Hi there,
can you help me with phone setting? I have Nokia Asha 200 and I would like to assign different ringtones to SIM1 and SIM2. In phone specification on the Web is following text:
Personalisation - Assignable icons, ringtones and names for up to 5 different SIM cards.
How to do it?
Thank you all for your response

Thanks Judemoney,
but in SIM Manager it is not in such possibility, I conclude that in this type of phone it is impossible to assign a different ringtones to sim cards. The reference in the technical specification is probably confusing.
milan57

Assigning different authorization to same user based on Query

Hi experts,
I am redefining my issue,
Is there any way i can assign different authorizations to the same user but based on either Query/Workbook.
lets say i have two Analysis authorizations A & B and two Queries X and Y.
If the Query/Workbook is X then Add Authorization A to user ABC.
else if the Query/Workbook is Y then Add authorization B to user ABC.
this is because i have two set of workbooks the same user can access and authorization for these two set is different based on the workbook.
I tried using the auth objects 0TCTWORKBK,0TCTQUERID OR 0TCTQUERY but no success so far.
thank in advance.
Edited by: youmenbi on Feb 12, 2008 1:20 AM
Edited by: youmenbi on Feb 12, 2008 1:31 AM

Hi
We have set same kind of authorizations based on the users. The Cost Center Manager is assigned a role and the authorizations for each of the Report/Layout/Workbook is based on his/her profile...some are Read only, some or Read & Write...etc.
If you go through that route......and assign each of the Reports/Layouts/Workbooks to Users....you may succeed.
I know it is a bit time consuming but that is one alternative we could think of as it addressed seamlessly any changes in CC Managers.
Regards
Srinivas

How to assign different tones for different email ...

Hi.
I have a question, please.
Because I receive too many emails for work, I'm trying to "differentiate" them, assigning different tones or alerts for different email senders.
So I can understand when I have to read immediately an email, or it can be delayed.
I have never found any solutions in the native application (I think there is not); has anyone any idea or third-part software solutions?
thank you in advance.
G

I supposed too. THat's why I'm thinking to change for Blackberry, after many Nokia equipments. I'm not so happy to change, but I do not understand why Nokia remained so late from competitors.
Ok for OS, but they have not focused on business terminals after E71 (my phone), and so on.
I'm so sorry.
G

Assigning different GB instruments to Korg nanopad?

Similar Messages

Maybe you are looking for