Assigning DIP profile in Sales order

Hi all,
Here I had a strange issue. I want to assign DIP profile in my Sales order to create DP91. The box for assigning DIP profile ( Control of Resource-related Billing and Creation of Quotations) under SalesB tab of item data is disappearing in specific case.
Sometimes it is appearing and some other times it is not. I am not able to catch the difference. Can anyone please suggest me on this.
Ratna

Hi Prakash,
Thank you for your answer. My item cat is TAO and schedule line is CD. By default I am not using any requirement type (leaving the field as blank) as my case is service related. In that case I am not getting the above said box. But when I attach KE or any other requirement type manually in sales order under procurement tab, then that box is coming where I can attach my DIP. But why should I give requirement type as I am using material type as DIEN (service)? Where is the linke between requirement type and that box? This is just my analysis. May be I am going in wrong way (but my foundings are correct).
Can you suggest me please.
Ratna

Similar Messages

  • Rounding Profile on Sales Orders

    Hi  Guys, I am trying to set up a rounding profile on sales order. I did a config and is working fine for PO but not for sales order. I have rounding permit option selected in item category in sales order too, I have rounding profile defined in sales and MRP 1 view in material master but its just not rounding up to the value i defined when i save the sales order, Does any body know why?? Can you help please! Thanks

    create your static rounding profile and plant  in OWD1
    like:
    Threshold value    Round Value
    1                            5
    6                            10
    11                           20
    21                           30
    31                           40
    assign the profile in the Sales Org data 1 in material master
    enable rounding permitted in VOV7
    Regards
    Sidi

  • Assign batch number from sale order to production order automatic

    Dear all, I have a question for all. Please help me in this case
    My scenario is make to order
    I have a sale order, when i create sale order, i have assigned batch number at each line item.
    When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
    So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
    So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
    Thanks all

    Hi,
    To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
    In fact , you are following wrong practice for generating batch no.
    Follow procedure like this :
    Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
    While creation / releasing of Production order, you have option to generate batch automatically by following way :
    Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
    > Automatic Batch creation in the order maintain this field as
    1     Automatic batch creation at order creation
    or
    2     Autom. batch creation at order release
    This will generate batch number automatically at the time of creation or release of order.
    Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
    So you will get sales order stock in the form of batch managed.
    Check & revert if any issue in above flow.
    Regards,
    Tejas

  • Assignment number Field in sales order header

    Hi All,
    Can anyone let me know the ORDERS05 IDoc segment that corresponds to the Assignment number field in sales order header Accounting tab?
    I need to specify the assignment number while creating a new order through IDoc.
    Thanks.
    Regards,
    Riyaz

    Hi,
    Use transaction we60 to find the relevant documentation for your idoc type.
    regards,
    Jakub

  • Assign batches at the sales order level

    Hi
    Client wants to assign batches at the sales order level and keep ttack of the batch quantity at the same level.
    (the reason for the requirement is that somtimes they may want to change the batch number where th stock is picked)
    Thanks for any help
    Regards
    apsara

    Hi,
    You want to assign the batch at sales order level is possible but you have to choose
    the batch using CTRL + TAB in QTY Field before add the document.
    Once you not choose batch system allow to add the sales order without allocate batch.
    *Close the thread if issue solved
    Regards
    Jambulingam.P

  • BAPI_NETWORK_COMP_ADD     Component assignment not intended for sales order

    Dear,
    I have problem when I use the function:
      CALL FUNCTION 'BAPI_NETWORK_COMP_ADD'
        EXPORTING
          number           = number
        IMPORTING
          return           = return
        TABLES
          i_components_add = i_components_add
          e_message_table  = e_message_table.
    I have inserted only these values  in the structure i_components_add:
    ACTIVITY_TYPE_PUR_RESV__ITEM_NR____MATERIAL_________PLANT___ENTRY_QTY___ITEM_CAT
    108--8101TAH052000110025.460--
    L
    108--8204RAVBLA098SL0111002.000--
    L
    108--83034R000000011004.160--
    L
    but the result is wrong
    e_message_table:
    METHOD--C--
    32                                                                               
    OBJECT_TYPE--C--
    32                                                                               
    INTERNAL_OBJECT_ID---C--
    90                                                                               
    EXTERNAL_OBJECT_ID--C90-----0108 0010 1TAH052000 1100
    MESSAGE_ID--C20-----CNIF_MAT
    MESSAGE_NUMBER--C3--
    1
    MESSAGE_TYPE--C1--
    E
    MESSAGE_TEXT--C72--
    Component assignment not intended for sales order or project stock
    Very kind for one answer of yours to this problem...
    Thanks & Regards,
    Marco Echino.
    Edited by: Marco Echino on Sep 8, 2011 12:16 PM

    Hi Marco,
    I believe this is a Functional Issue rather than a Technical one. If you could speak to the Functional Concultant or pass this data via manual transaction, you will get the error details.
    It's just that the data passed to the BAPI is either incorrect or incomplete. You can also refer the Function Module Documentation for tips.
    Regards,
    Pranav.

  • To change user status profile on sales order at run time.

    Hi Experts,
    We have defined status profile for Sales returns ( Doc type RE) which blocks the  return order on creation. There are two statuses here which are to remove the delivery block and to remove the billing block by authorised users.
    The requirement is now to have a three level block ( three statuses ) on the same document. We can create a new status profile and assign it to a new return sales order tpye  but we want to avoid creating new document types. Since this document type is used across various companies in the group we can not assign a new profile on the existing RE document as well.
    My question to all experts is
    Is it possible to dynamically change the status profile assigned to the document type based on characterstics like sales org or company code etc? If any body has done this please let me know the user exit , function module, BADI etc where the necessary coding has been done.
    Helpful answers will be rewarded with points.
    I look forward to your co operation.
    Regards,
    Kartik Shah

    Hi Liam,
    In the Program MV45AFZZ in the FORM userexit_save_document
    you use the following fn module to change the user status
    'STATUS_CHANGE_EXTERN'
    Example
    IF t180-trtyp = 'H'.  "Only creation time
      READ TABLE xvbap WITH KEY matnr = c_matnr.
      IF sy-subrc = 0.  "If above material exist then change status
        LOOP AT xvbap WHERE cuobj NE space
                       AND  matnr =  c_matnr.
          l_objnr = xvbap-objnr.
          CALL FUNCTION 'STATUS_CHANGE_EXTERN'
            EXPORTING
              objnr               = l_objnr
              user_status         = 'E0013'  "Send ej IDOC
              set_chgkz           = 'X'
            EXCEPTIONS
              object_not_found    = 1
              status_inconsistent = 2
              status_not_allowed  = 3
              OTHERS              = 4.
        ENDLOOP.
      ENDIF.
      sy-subrc = 0.  "Restore the previous condition
    ENDIF.
    Reward if helpful *********

  • Status profiles for sales order

    Dear all:
      I use  status profiles to do sales order approve(BS02)
    who can tell me which business transaction can settle Sales Order can or not make to MD04?
    the standard business transcation:
    Acct. assignment order/project
    Activate final billing doc.
    Actual activity allocation
    Actual overhead (periodic)
    Actual settlement
    Automat. WIP/results analysis
    Change configuration data
    Complete
    Confirm order
    Create billing document
    Create changeable copy
    Create delivery
    Create inquiry
    Thanks a lot .

    hi,Imran  and rohit rathi
    thank you very much for you help,
    maybe I have't depict the problem,
    I use user status profiles to do sales order approve, i have defined a status profiles and assigned it to sales document type ,  i have defined two statuses  A00 and B00 in the  status profiles .
    I hope if the sales order in status A00,it'can make to MD04,when the sales order approved to status B00,It can make to MD04.
    but I don't know which business transaction  shoud I choose when defining the profiles' status A00 by t-code BS02.
    thanks and Best wishes.
    zeng
    Edited by: zeng zeng on May 31, 2008 11:37 AM

  • Settlement Profile for Sales Order make to Order Production.

    Hi
    This is the first time I am working for CO and I do have a very basic question:
    When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance.
    It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
    I do have all the screen shot and logical flow charts and I could e-mail to you for a quick glance.
    Thanks

    I will take a look at your documentation - my email is on my profile business card.
    althea

  • Rounding Profile for Sales Order Quantity

    Hi ALl,
    we want to set up sales order such that order can be logged in for min. qty of 100 and further in multiples of 50 . So we created a rounding profile in PP->MRP->planning->lot size calculation. But the profile created here is not available for selection in material master sales org. 1 view.
    Where do we need to maintaion this rounding profile in order to be able to select in sales 1 view of material master.
    Prashant

    firstly, setup the field Rounding permitted of item category you used in S/O.
    secondly, setup the field RoundingProfile in material master data.
    thirdly, check the value in transaction OWD1, Maintain Control Profiles for Quantity Optimizng, Assign Control Profiles.

  • How to restrict status profile for sales order.

    Dear Friends,
    Pl suggest me for follwoing scenario
    ►     As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
    ►     It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
         The requirement is  Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
    Is there any solution above scenario without writing any code.
    Regards,
    Atul
    Edited by: atul thakur on Oct 28, 2009 5:09 AM

    Mr Atul,
    My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
    The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
    Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
    But order quantity can be increased any time.
    So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
    Use the MV45AFZB user-exit program and form  FORM userexit_check_vbap to code this.
    Hope this helps you.
    Regards,
    Aj.

  • Change in Account Assignment group in Open Sales orders

    Dear All
    In SAP 4.7 there are 100 nos of Sale order item having Account Assignment Group .
    I need to change the account assigment group field from open sale orders, but the field is grey.
    Is it possible to change the subject field.? Please help
    Regards
    BGLimaye

    If I am correct, even in creation mode, this field (Account Assignment Group) will be in grey mode and cannot be maintained manually in sale order. 
    Whatever you maintain in material master, that only will flow.  Due to some reasons, if the same is not flowing in sale order and you want to rectify this,  if you ask me, the only option is close those line items, maintain the account assignment group in material master, create LSMW for VA02 and include as new line items.
    thanks
    G. Lakshmipathi

  • Account Assignment Gp. Change in Sales Order At Item Level

    Due to Some Changes in Material Account Assignment Gps. , I want to Change A/C Assignment Gps. at Item Level in the Sales order it self . as there are so many pending sales orders with Old A/C assignment gp. I tried through MASS updation , but Item level A/C assignment field is not avialable . Pl. help to solve this matter

    Dear,
           I explain you the process that where the actual field is this.
          First Go on T.Code MASS --> Select Object Type : BUS2032 ---> F8 (Execute) --> Select SD document: Business item data : Table Name :MASSSDPOSVBKD ---> F8 (Execute) -- > Choose Selection Field (Square Check Button at Footer) ---> Select AcctAssgGr Field from Pool to Selection criteria --> Select OK.
          Hope it will help you.
    Regards,
    Sandip

  • Status profile in sales order

    Dear All,
    I have a requirement  as below
    In status profile  maintained 5 statuses in the sales order when the user  releases 4th status system should not allow to change the sales order .

    Hi
    Your requirement can be fulfilled through a User exit.
    You write the logic as below, All the data related to statuses are stored in JCDS and JEST tables.
    So you can pass the OBJNR from VBAK to JCDS table there you have to get the status for the fourth profile and look for the fields
    INACT and CHIND,  if for the fouth status if the CHIND is U then there should not be nay modifications
    regards
    Prashanth

  • Status profile in sales order  Re Release

    Hi Experts,
    Scenario is like this
    Iam using status profile ZETO1 in T.Code [BS02] for releasing sales order once Sales team person creates a sales order VA01. After this Fiance person will release through sales order  status in header (i have created status profile and authorisation key
    which will be with Finance person)
    I have status profile  like this step 10 and 20 in T.Code [BS02]
    10. created (initail status)
    20. released by finance
    once finace person release this delivery can happen.(i have used user exit for this)
    the problem is if sales team member again make changes in sales order then status of sales order again should go to step 10 then it should be again released by finance person.
    whether it is possible to re realese in status profile concept in SD???
    please help
    Thanks and Regards,
    kedar

    Hi
    Your requirement can be fulfilled through a User exit.
    You write the logic as below, All the data related to statuses are stored in JCDS and JEST tables.
    So you can pass the OBJNR from VBAK to JCDS table there you have to get the status for the fourth profile and look for the fields
    INACT and CHIND,  if for the fouth status if the CHIND is U then there should not be nay modifications
    regards
    Prashanth

Maybe you are looking for