Assigning filter criteria for custom message type.

Hi everyone,
In our requirement i have created a custom message type ZDEBMAS like debmas. now while creating a distribution model with this message type, i need to create a filter for this.
only IDOCs of customers with Account group 0001, 0002 and 0012 has to be triggered. I'm able to create the filter with message type DEBMAS, but while i'm using message type ZDEBMAS i'm unable to create any filter. Can any help me in this.
thanks in advance,
Rajni

Hi!
Do you create filter with BD95 and  allocation with BD59 transactions?

Similar Messages

  • Distribution model. Create filters for custom message type.

    Hello,
    I have created a model view, and added a new message type (copy of HRMD_A). I want to add filters, but the system does not allow it. Do you know if I can only add filters to a standard message type, and not to a custom one?
    Thank you,
    Elena.

    Thanks for your answer, but I think I didn't explain my question well.
    I have created a message type ZHRMD_A, and a basic type ZHRMD_A07 (both copies of HRMD_A and HRMD_A07)
    I am creating the distribution model, in transaction BD64.
       I created the model view.
       I inserted my messsage type.
    Now I want to add filters to the message type in the distribution model. When I add a standard message type, I can see under the message type the text 'No filter set'. Then I double click this text, and I can add filters. When I add the custom message type, I don't see this text, and I have no option to add filters. That's why I think I cannot add filters to a custom message type.

  • Problem to create change pointer for custom message type - Idoc creation

    Hi,
    We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
    We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
    Can anybody help / guide?

    Thanks once again,
    I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
    whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
    Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
    Rgds
    kewal.

  • Idoc serialization for custom message types

    Hello,
    We have a scenario where we need to serialize outbound messages where the message types are both custom and SAP standard. Can we serialize custom message types and how?

    Hi,
    you need to create a serialization group (in customizing) and assign all the IDocs (in specific order) to this group incl. your custom IDoc.
    When data is transfered first a SERDAT01 IDoc will be sent, after this your IDocs have to follow in specific order. At last again a SERDAT01 follows and triggers the processing in the destination system.
    Regards,
    Kai

  • Change pointer for custom message type

    Hi,
    I have a situation where in, i need to create a custom message type and need to track the changes in the table fields using the Change pointer technique.
    Can anybody guide me as to what are the step to be followed after i create the custom message type and how to register the fields of the message type ?
    Note : Change document (CDPOS) technique is ruled out in my requirement.
    Regards,
    Kewal.

    Thanks once again,
    I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
    whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
    Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
    Rgds
    kewal.

  • Change pointers for custom message type

    Hi All,
      Please help me with questions.
    1. The requirement is to add two additional fields to CSCK table and then activate change pointers for COSMAS. My question is when I activate the change pointers for COSMAS will it send this two z fields when there is a change?
    2. I dont see a message type in BD50 for a standard IDOC Internal_order? Can I add that standard message type? How can I do this? WIll this create an IDOC when ever there is a change in data?
    Thanks.

    Hello Oscar,
    1. Which changes should be relevant for creation of COSMAS-IDoc, you have to define in BD52.
    2. You need to define INTERNAL_ORDER in WE20. In BD64 you add BAPI "InternalOrder.SaveReplica", filters can be added.
    Best Regards, Dirk

  • How to add custom infotype in ALE for HRMD_A  message type

    Hi  Friends-
    Pls help me for our req  we are using HRMD_A  Message Type for  HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type   how i can do that pls let me know ?
    <<removed_by_moderator>>
    Regards
    Meeta &  Glory
    Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

    Hi
    Thanks for your support,
    Pls let me know which steps i should go ?  my secanrio is  inbound side only,
    step 1 )   Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
    step 2) do i need to write some code in BADI also to update information for my custom infotype also  if yes then where and which BADI pls let me know  ? because already am working on one badi HRALE00INBOUND_IDOC for  few validation for incoming data.
    step 3 )  add  this new custom infotype in my standard ALE  filters.
    Pls let me know if am mistaking some where or if  i have to do some thing else ?
    Regards
    Meeta & Glory

  • Filter Infotypes based on Company Code for the Message Type HRMD_A

    Hi,
    I have a requirement to send different infotypes for different Company codes using the same distribution model for the message type HRMD_A.
    Example :
    For the BUKRS 2500 I need to send infotype 0000 ,0002,0006
    For the BUKRS 2600 I need to send infotype 0000 ,0008,0009
    It will be a great help for me if any one can guide me on that.
    Regards,
    Raka

    Hi ,
    Thanks for the reply.
    I alredy have done that . But its not working.
    Its working only for infotype 0001.
    If the infotype is there in any of the filter groups, the data will be sent irrespective of the Com Code.
    Regards,
    Raka

  • Middleware-Filter criteria for Transactions replication.

    Hi Experts,
    Can we use filter criteria while transferring transactional data from CRM to R/3.
    Like i want to restrict the replication of transactions of some BP's who belongs to one particular region. Based on the region field can i put the filter criteria for the transactions.
    Points will be rewarded.
    Thanks in advance
    Nadh.

    Hi Nadh,
    I dont think if it will work. As this object is used for BulK messaging, hence you will not be able to create filters.
    Regards
    Keshav
    PS: Please reward point if the info is useful.

  • ZHRMD_A Custome message type issue with custom segments.

    Hi Experts,
    We have implemented ALE in HR system, we have all other ALE using HRMD_A and we have jobs scheduled for HRMD_A message type. We dont want this job should trigger our model and distribute the data. So we have reduced the HRMD_A messae type to ZHRMD_A for basic type HRMD_A06. Every thing fine. After upgrade of SAP FROM ECC6.O to EHP4, PFAL is not creating IDOC segements for custom segments Z*. for example Z1P0002....ETC, though there is personal data for PERNR.
    Please guid if you have come across such situation and solution.
    Thanks & Regards.
    Venkat.

    Hi Venkat,
    In the same way i too have one situation like...have different model view with same message types( and same extension type) for various countries from one sender system.
    Should i create reduced message type for each model view?
    Or can i use same message type HRMD_A for various model views?
    If i can use same message type and same extension type for various model views is there any restriction we need to write in USER EXIT  EXIT_SAPLRHA0_004?
    Regards,
    Lava.

  • Need help for new message type for PO archiving

    Hello All
      I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
    Steps for new Message Type for PO Archiving
    1.     Defined new Table 513 Purch.Org./Plant.
    2.     Defined new access sequence Z513 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 21
    Table = 513
    Description = Purch.Org./Plant
    Requirement = 101
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZARR for PO
    General Data
    Access Sequence = Z513
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Program = FM06AEND
    FORM Routine = CHANGE_FLAG
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = Print Out
    Storage System
    Storage Mode = Archive Only
    Document Type = ARCHIVE
    Mail Title and texts
    Language = EN
    Title = Archiving for Legal Requirement
    Processing Routines
    Transmission Medium = 1 (Print Out)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = ZJ_9H_MEDRUCK
    Partner Roles
    Medium = Print Out
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 1
    CType = ZARR
    Name = Testing for Archivin
    Short Text = New
    Update Print Related Data = Yes (checked)
    Oprat. = 2
    CType = ZARR
    Name = Testing for Archivin
    Short Text = Change
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1
    Step = 100
    Cntr = 1
    CTyp = ZARR
    Description = Testing for Archivin
    Requirement = 101
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZARR
    Med = 1 (Printout)
    Funct = VN
    Name = Testing for Archivin
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Plant = 24
    Partner Funct = VN
    Medium = 1 (Printout)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = HUL1
    Storage Mode = Archiving only
    Thanks
    Ankit

    the problem is the Exclusive = Yes  indicator in the access sequence.
    Your other message has this exclusive indicator as well.
    so if the first  message is found, then no other message wil be determined
    to allow several messages in one PO, you must not set this exlusive indicator

  • Tcode to send custom data using custom message type in ALE

    I have ceated custom message type and i want to send data to say system B.I wanted to know Tcode to send custom data using custom message type in ALE.
      for example:
    material data...message type = matmas....tcode = BD10.
    like this.
      i hope you have got my question.
    plz guide me?
       regards
         mallikarjun mangalore

    Hi,
    Sending data through ALE is not a single-step process. Take a look at http://www.sapgenie.com/ale/. The paper at http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc is a wonderful resource for the ALE process.
    Regards

  • ALE - error in custom  message type creation

    HAI friends,
    I am new to ALE IDOC, i am creating custom message type for custom table . i created segment, idoc, message type and executed  outbound program . in outbound client, status is dispatch ok. so problem in outbound.
    my problem is in inbound . i created one function module idoc_input_zmsg. In test tool for idoc processing ie. TCODE WE19, i clicked my segment and then i clicked the inbound function module button . In function module text box my own function module idoc_input_zmsg is available. but when i click ok button, i am getting the following error.
    "INTERFACE FOR FUNCTION IDOC_INPUT_ZMSG IS INCORRECT".
    PLS HELP ME . THANKS IN ADVANCE.
    WITH REGARDS,
    SENTHIL KUMAR.R

    All the IDOC processings FMs should have similar interface like this.
    *"  IMPORTING
    *"     VALUE(INPUT_METHOD) LIKE  BDWFAP_PAR-INPUTMETHD
    *"     VALUE(MASS_PROCESSING) LIKE  BDWFAP_PAR-MASS_PROC
    *"  EXPORTING
    *"     VALUE(WORKFLOW_RESULT) LIKE  BDWFAP_PAR-RESULT
    *"     VALUE(APPLICATION_VARIABLE) LIKE  BDWFAP_PAR-APPL_VAR
    *"     VALUE(IN_UPDATE_TASK) LIKE  BDWFAP_PAR-UPDATETASK
    *"     VALUE(CALL_TRANSACTION_DONE) LIKE  BDWFAP_PAR-CALLTRANS
    *"  TABLES
    *"      IDOC_CONTRL STRUCTURE  EDIDC
    *"      IDOC_DATA STRUCTURE  EDIDD
    *"      IDOC_STATUS STRUCTURE  BDIDOCSTAT
    *"      RETURN_VARIABLES STRUCTURE  BDWFRETVAR
    *"      SERIALIZATION_INFO STRUCTURE  BDI_SER
    *"  EXCEPTIONS
    *"      WRONG_FUNCTION_CALLED
    Check if you have different one. Even if the name of variables is not as above you may get the error message .
    Cheers

  • How to use custom aspx page as template for custom content type

    Hi,
    I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
    Can anybody please let me know how to accomplish this?
    Any help would be appreciated.
    Thank you,
    AA.

    Check if you are looking for the below
    http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • IDOC Segment missing for MATMASS Message type

    Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
    1) Change pointers are defined in system for the message type T Code u2013 BD52.
    2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
    3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
    In our case IDOC is getting generated but with one segment missing.
    We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
    Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
    Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
    Regards,
    Roshni.

    Jürgen L. wrote:
    > I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
    > This seems to be home made.
    >
    > You are expecting that standard SAP programs are generating change pointers for your z-fields?
    > Do you see a change history in material master for your z-field?
    >
    >
    > follow the slution from this thread:
    >
    Yes ,This is a Z -field.
    Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
    This is z-field in the basic data view of material master.
    Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
    But in case of succesful IDOC the object value is same as material number.
    Regards,
    Roshni

Maybe you are looking for