Assigning Helpdesk rights to Mobility Service WebConsole

Would like to assign some basic help desk rights to be able to resync, delete, and block device without giving them full admin rights and access to the Config section.
Is there a way to do that? I can only find adding another Admin.

ochschr wrote:
>
> Would like to assign some basic help desk rights to be able to resync,
> delete, and block device without giving them full admin rights and
> access to the Config section.
>
> Is there a way to do that? I can only find adding another Admin.
Today it's all-or-nothing as we don't have any sort of role-based
administration within GMS.
Your world is on the move. http://www.novell.com/mobility/
Supercharge your IT knowledge. http://www.novell.com/techtalks/

Similar Messages

I have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen.

Need some help getting started with Mobility Services Engine

Someone has ordered several 3602 access points, a 5508 controller, and a MSE 3310 for one of our remote locations. The access points and controller are in place and are working fine (we use lightweight APs at many other locations), but I'm not sure how to approach the MSE. I've gone through the set up, and it's onsite, on the network, and I've added it to our WCS server. It's got a 2000 user context-aware services license. But I'm not sure where to go from here. It doesn't seem to actually be doing much of anything. Is there some quick start guide as to where to go from this point? The wireless users are mostly mini netbooks and iPads.

Well, I'm no expert, but I did spend the night...
Ok. In the WCS on the Services tab, Mobility Services, your MSE is recognized and reachable with matching SW Versions.
So, on the home tab, ContextAware tab, you see your MSE and it is showing Zero's for data in most if not all fields?
Back to the Services tab, Synchronize Services... is this empty?
The MSE can only 'SEE' what you tell it to 'LOOK' at. That is, buildings and floor areas. I haven't tried just a building.
Check the left hand box for all the floor areas of interest. Scroll to the bottom an slect 'Change MSE Assignment"
select which (of the many or the one) MSE you wish to have monitor the area. Check the 'CAS' box and save.
Up on the upper levt is a Synchronization block.. push the Synchronize button and sit back..
All MSE data is presented only to the WCS (or Pi).
Good Luck
David

CRM Mobile Service For Handheld

Can anyone help me understand why this log shows method CRMHH_SYNC could not be executed. My architecture is as follows:
WebAS 620 SP53
ME 21SP03
CRM Server 40SP08
CRM HH 40SP08
I have followed the installation guide for ME21SP03 (Table Mappings, Authorizations, RFC Destination, etc.) and also to the Mobile Service for Handheld Scenario configuration Guide. Any help would be greatly appreciated.
Scott
new request -
[20050714 10:32:08:391] I EventMappingStrategyImpl.createEventMethod
[20050714 10:32:08:391] I methodName = doEventSync
[20050714 10:32:08:391] I method = public void com.sap.crm.handheld.webpages.service.sync.SyncOptionsWebPage.doEventSync(com.sap.crm.handheld.core.webtools.RequestContext) throws com.sap.crm.handheld.core.webtools.WebPageException
[20050714 10:32:08:391] I evnetName = Sync
eventMethod = public void com.sap.crm.handheld.webpages.service.sync.SyncOptionsWebPage.doEventSync(com.sap.crm.handheld.core.webtools.RequestContext) throws com.sap.crm.handheld.core.webtools.WebPageException
[20050714 10:32:08:621] I pageURI = /sync/Wait.jsp and dispatcher = org.apache.tomcat.facade.RequestDispatcherImpl@6d2633
[20050714 10:32:08:641] D in UpSyncPhase.execute()
[20050714 10:32:08:672] D GUID generation last time (1121351528672) was >= than current time (1121351528672) --> use this time instead 1121351528673
[20050714 10:32:08:682] D created Container(CRMHH_SYNC_PLAYBACK)
[20050714 10:32:08:682] D begin Container.addCall
[20050714 10:32:08:682] D sending method: CRM_WAP_GO_TO_ACT_SAVE
[20050714 10:32:08:682] D Container.addItem(METHOD_NAME, 1, CRM_WAP_GO_TO_ACT_SAVE)
[20050714 10:32:08:692] D Container.addItem(TRANSACT_ID, 1, 4414029B1CE282C2D5C13E8F81D9A0E6)
[20050714 10:32:08:692] D Container.addItem(IV_FROM_TIME, 1, 20050714143100)
[20050714 10:32:08:692] D Container.addItem(IV_PRIORITY, 1, )
[20050714 10:32:08:692] D Container.addItem(IV_FOLLOWUP_PARENT, 1, )
[20050714 10:32:08:692] D Container.addItem(HH_SCENARIO_ID, 1, 02)
[20050714 10:32:08:692] D Container.addItem(IV_OFFLINE_LUID_ACTIVITY, 1, DD2912268524DC211A7D08B597FA26D2)
[20050714 10:32:08:692] D Container.addItem(SESSION_ID, 1, E386F8910CD7AEA7566E23893E9FD298)
[20050714 10:32:08:692] D Container.addItem(IV_ACTIVITY_TYPE, 1, )
[20050714 10:32:08:692] D Container.addItem(DUMMY_VALUE, 1, TASK)
[20050714 10:32:08:692] D Container.addItem(IV_OFFLINE_TASK_FLG, 1, X)
[20050714 10:32:08:692] D Container.addItem(IV_ACTIVITY_DESCRIPTION, 1, SCOTT"S TEST)
[20050714 10:32:08:692] D Container.addItem(IV_STATUS, 1, )
[20050714 10:32:08:692] D Container.addItem(IV_REASON, 1, )
[20050714 10:32:08:692] D end Container.addCall
[20050714 10:32:08:732] D end UpSyncPhase.execute()
[20050714 10:32:08:732] I in DownSyncPhase.execute([Ljava.lang.String;@27fa12)
[20050714 10:32:08:742] D created Container(CRMHH_SYNC)
[20050714 10:32:08:742] D begin Container.addCall
[20050714 10:32:08:742] D sending method: CRMHH_SYNC_SELECT
[20050714 10:32:08:742] D Container.addItem(METHOD_NAME, 1, CRMHH_SYNC_SELECT)
[20050714 10:32:08:742] D Container.addItem(TRANSACT_ID, 1, 5422A97279A1E29F0849B9F2AA392DFC)
[20050714 10:32:08:742] D Container.addItem(PRODUCT_SRV, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(ATTENDANCE, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(HH_SCENARIO_ID, 1, 02)
[20050714 10:32:08:742] D Container.addItem(ASSIGNMENT, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(ACTIVITY, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(SESSION_ID, 1, E386F8910CD7AEA7566E23893E9FD298)
[20050714 10:32:08:742] D Container.addItem(BP, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(LANGUAGE, 1, EN)
[20050714 10:32:08:742] D Container.addItem(A_TO_Z_GROUPS, 1, AE,FJ,KO,PU,VZ,09)
[20050714 10:32:08:742] D Container.addItem(PACKED, 1, dummyValue)
[20050714 10:32:08:742] D Container.addItem(TIMESTAMP, 1, 1121351528732)
[20050714 10:32:08:742] D Container.addItem(VERSION, 1, SP11)
[20050714 10:32:08:742] D end Container.addCall
[20050714 10:32:08:812] S Synchronize with backend called
[20050714 10:32:08:812] D Synchronisation: Fire SyncEvent 0
[20050714 10:32:08:812] I SyncEvent Performing com.sapmarkets.apps.wafhome.SyncStatus
[20050714 10:32:08:812] I SyncEvent Performing com.sap.ip.me.core.UserManagerSyncEventListener
[20050714 10:32:08:812] I SyncEvent Performing com.sap.ip.me.smartsync.syncadp.SmartSyncSyncEventListener
[20050714 10:32:08:812] I SyncAdapter: get the Start event; start to process outbound message.
[20050714 10:32:08:842] D Me Persistence initialization, step 2: start create instance of com.sap.ip.me.persist.core.PersistenceRuntimeImpl
[20050714 10:32:08:842] D Me Persistence initialization, step 3: end create instance of com.sap.ip.me.persist.core.PersistenceRuntimeImpl
[20050714 10:32:08:942] I SyncEvent Performing com.sap.ip.me.core.StatusUpdater
[20050714 10:32:08:942] I SyncEvent Performing com.sap.ip.me.core.RegistryInboundProcessingLog$RegistryInboundProcessingLogSyncEventListener
[20050714 10:32:08:972] I Synchronization started for user SERVICEREP2
[20050714 10:32:08:972] D Synchronisation: create outbound container for each conversation id
[20050714 10:32:09:212] S Synchronisation started
[20050714 10:32:09:212] D Dumping file ''C:\Program Files\SAPMobileEngine\sync\SERVICEREP2\packages\package.sync''
INH-H[1]=010515c12c58895de3fd;SERVICEREP2;C;;7653A2E9A0C4BB41B1931D3C9886A9FB;5B6377EC9BBEC746A9BB741E9A5B5904;;;NEW_PROTOCOL;;0;;0&INH-H[2]=010515c135e4fb041296;SERVICEREP2;A;;7653A2E9A0C4BB41B1931D3C9886A9FB;BD334E974AAAE54DA0F3EF570D5B30...
[20050714 10:32:09:212] D End of content of file ''C:\Program Files\SAPMobileEngine\sync\SERVICEREP2\packages\package.sync''
[20050714 10:32:09:212] S Do not use http proxy (system properties update)
[20050714 10:32:09:212] D do httpPost http://sapatl.abacoatl.abacoinc.com:50000/meSync/servlet/meSync?sysid=abc&login=SERVICEREP2&password=**********&client=000&~language=EN&ACKNOWLEDGE=X& via C:\Program Files\SAPMobileEngine\sync\SERVI...
[20050714 10:32:09:212] S UrlConnectionTest: Set sleeping time for future connection tests to 500
[20050714 10:32:09:212] S UrlConnectionTest: returning instance for host sapatl.abacoatl.abacoinc.com
[20050714 10:32:09:212] D UrlConnectionTest: lastHostChecked was
[20050714 10:32:09:212] D UrlConnectionTest: lastTimeOfCheck was 0
[20050714 10:32:09:212] D UrlConnectionTest: last check was 1121351529212 ms ago
[20050714 10:32:09:212] S UrlConnectionTest: try number: 1
[20050714 10:32:09:212] S UrlConnectionTestThread: method run() started...
[20050714 10:32:09:222] S UrlConnectionTestThread: URL protocol is http
[20050714 10:32:09:222] S UrlConnectionTestThread: HTTP responsecode is 200
[20050714 10:32:09:713] S UrlConnectionTest: it took 501 ms to test the connection
[20050714 10:32:09:713] S UrlConnectionTest: Connection could be established!!!
[20050714 10:32:09:713] S URL connection test was successfull!!!
[20050714 10:32:09:713] D GzipDataCompression: Gzip data compression is switched off
[20050714 10:32:09:713] I Http Connection start
[20050714 10:32:09:723] I Http Connection end
[20050714 10:32:09:723] I Http Connection start
[20050714 10:32:09:813] I Http Connection end
[20050714 10:32:09:813] S Synchronisation successfully connected
[20050714 10:32:09:823] I New SyncInboundManager SINGLETON created : com.sap.ip.me.sync.SyncInboundManager@718e8e
[20050714 10:32:09:823] I Number of pending inbound containers before inbound processing = 0
[20050714 10:32:09:833] S Synchronisation: valid response received from server
[20050714 10:32:09:833] I -
InboundContainer created: Type:C,Id:8298A492781CA749A20E4B9AF8B72EE4,SId:,Items:0,MaxI:0
[20050714 10:32:09:833] I -
InboundContainer created: Type:A,Id:6A988084A1676B429072B422111D22C3,SId:,Items:0,MaxI:0
[20050714 10:32:09:833] I -
InboundContainer created: Type:A,Id:7D2B560DE64E264181D29CA026EBC57C,SId:,Items:0,MaxI:0
[20050714 10:32:09:833] I -
InboundContainer created: Type:A,Id:7BCDFAA19094E84F9A9ADFC384ABA2CB,SId:,Items:0,MaxI:0
[20050714 10:32:09:833] D SyncInboundContainer: closing reader for inbound file / stream
[20050714 10:32:09:833] D Dumping file ''C:\Program Files\SAPMobileEngine\sync\SERVICEREP2\inbound.sync''
&WAF_SYNC&STATUS=&Execution Time =103155& HeaderType = MEREPLICATION &MORE_PACKAGES_WAITING = &
HEADERS&0&8298A492781CA749A20E4B9AF8B72EE4 &SERVICEREP2 &C & &0000-00-00 &00:00:00 &0000-00-00 &00:00:00 & &7653A2E9A0C4BB41B1931D3C9886A9FB &010515c135e4fb041296 & & &NEW_PROTOCOL & & & &0000000000 &
HEADERS&1&6A988084A1676B429072B422111D22C3 &SERVICEREP2 &A & &0000-00-00 &00:00:00 &2005-07-14 &10:31:55 &O &7653A2E9A0C4BB41B1931D3C9886A9FB &010515c2725cc0556bd7 & & &NEW_PROTOCOL & & & &0000000000 &
HEADERS&2&7D2B560DE64E264181D29CA026EBC57C &SERVICEREP2 &A & &0000-00-00 &00:00:00 &2005-07-14 &10:31:55 &O &B15257F600FB7B48A49F09112DAE2585 &010515c272ac66b0b471 & & &NEW_PROTOCOL & & & &0000000000 &
HEADERS&3&7BCDFAA19094E84F9A9ADFC384ABA2CB &SERVICEREP2 &A & &0000-00-00 &00:00:00 &2005-07-14 &10:31:55 &O &DFD994D2EC0DC24F87A6E77555BCAF4D &010515c2720c456d28d4 & & &NEW_PROTOCOL & & & &0000000000 &
[20050714 10:32:09:833] D End of content of file ''C:\Program Files\SAPMobileEngine\sync\SERVICEREP2\inbound.sync''
[20050714 10:32:09:843] I All inbound containers successfully read from file
[20050714 10:32:09:843] S Synchronisation: Start processing inbound data
[20050714 10:32:09:843] I There are 4 inbound containers to be processed
[20050714 10:32:09:893] D GUID generation last time (1121351529893) was >= than current time (1121351529893) --> use this time instead 1121351529894
[20050714 10:32:09:913] I Processed 4 acknowledges and 0 sub-containers
[20050714 10:32:09:913] I Processed 0 not arranged containers
[20050714 10:32:09:913] I Processed 0 ordered containers
[20050714 10:32:09:913] I Number of pending inbound containers after inbound processing = 0
[20050714 10:32:09:913] S Synchronisation: Processing of inbound data finished
[20050714 10:32:09:923] A There are no more packages waiting
[20050714 10:32:09:923] D resetting the info which outbound containers are already created for user SERVICEREP2
[20050714 10:32:09:933] I Synchronization finished for user SERVICEREP2
[20050714 10:32:09:933] I Synchronization started for user (SHARED)
[20050714 10:32:09:933] D Synchronisation: create outbound container for each conversation id
[20050714 10:32:09:973] S Synchronisation started
[20050714 10:32:09:973] D Dumping file ''C:\Program Files\SAPMobileEngine\sync\(SHARED)\packages\package.sync''
INH-H[1]=010515c1390f50b1054b;SERVICEREP2;C;;20AC7A4F37ADC74BB348AADCFFF810E7;CD9781E70D122A4E89B3F7A8393AE988;;;NEW_PROTOCOL;;0;;0&INH-H[2]=010515c13910ef8dd9fe;SERVICEREP2;C;;4F78594976510E4BBB7C0099206FDAE6;449E76D46FE69F4B833868EFAAEBB7...
[20050714 10:32:09:973] D End of content of file ''C:\Program Files\SAPMobileEngine\sync\(SHARED)\packages\package.sync''
[20050714 10:32:09:973] S Do not use http proxy (system properties update)
[20050714 10:32:09:973] D do httpPost http://sapatl.abacoatl.abacoinc.com:50000/meSync/servlet/meSync?sysid=abc&login=SERVICEREP2&password=**********&client=000&~language=EN&ACKNOWLEDGE=X& via C:\Program Files\SAPMobileEngine\sync\(SHAR...
[20050714 10:32:09:983] S UrlConnectionTest: returning instance for same host sapatl.abacoatl.abacoinc.com
[20050714 10:32:09:983] D UrlConnectionTest: lastHostChecked was sapatl.abacoatl.abacoinc.com
[20050714 10:32:09:983] D UrlConnectionTest: lastTimeOfCheck was 1121351529212
[20050714 10:32:09:983] D UrlConnectionTest: last check was 771 ms ago
[20050714 10:32:09:983] S UrlConnectionTest: skipping test for sapatl.abacoatl.abacoinc.com
[20050714 10:32:09:983] S URL connection test was successfull!!!
[20050714 10:32:09:983] D GzipDataCompression: Gzip data compression is switched off
[20050714 10:32:09:983] I Http Connection start
[20050714 10:32:09:983] I Http Connection end
[20050714 10:32:09:983] I Http Connection start
[20050714 10:32:16:423] I Http Connection end
[20050714 10:32:16:423] S Synchronisation successfully connected
[20050714 10:32:16:423] I Number of pending inbound containers before inbound processing = 0
[20050714 10:32:16:423] S Synchronisation: valid response received from server
[20050714 10:32:16:423] I -
InboundContainer created: Type:A,Id:FF753981510B3B46961132AD416BB0D8,SId:,Items:0,MaxI:14
[20050714 10:32:16:423] I -
InboundContainer created: Type:A,Id:3F3C505B22DDE9448798EDD487D42045,SId:,Items:0,MaxI:14
[20050714 10:32:16:423] I -
InboundContainer created: Type:R,Id:BCBBE9B9FCBC1A4BAB38DD8F67369DDA,SId:,Items:0,MaxI:16
[20050714 10:32:16:423] I -
InboundContainer created: Type:R,Id:1A69636588A0824F954BEEE1ED4CF70C,SId:,Items:0,MaxI:16
[20050714 10:32:16:433] D SyncInboundContainer: closing reader for inbound file / stream
[20050714 10:32:16:433] D Dumping file ''C:\Program Files\SAPMobileEngine\sync\(SHARED)\inbound.sync''
&WAF_SYNC&STATUS=&Execution Time =103157& HeaderType = MEREPLICATION &MORE_PACKAGES_WAITING = &
HEADERS&0&FF753981510B3B46961132AD416BB0D8 &SERVICEREP2 &A &CRMHH_SYNC &0000-00-00 &00:00:00 &2005-07-14 &10:32:00 &O &68F42C5021041447A946ED8C235BE538 &010515c2711cd877a203 & & &NEW_PROTOCOL & & & &0000000014 &
HEADERS&1&3F3C505B22DDE9448798EDD487D42045 &SERVICEREP2 &A &CRMHH_SYNC_PLAYBACK &0000-00-00 &00:00:00 &2005-07-14 &10:32:01 &O &68F42C5021041447A946ED8C235BE538 &010515c270e1ca246e14 & & &NEW_PROTOCOL & & & &0000000014 &
HEADERS&2&BCBBE9B9FCBC1A4BAB38DD8F67369DDA &SERVICEREP2 &R &CRMHH_SYNC &2005-07-14 &10:32:00 &2005-07-14 &10:32:00 &E &68F42C5021041447A946ED8C235BE538 &010515c2711cd877a203 & & &NEW_PROTOCOL & &0000000000 & &0000000016 &
HEADERS&3&1A69636588A0824F954BEEE1ED4CF70C &SERVICEREP2 &R &CRMHH_SYNC_PLAYBACK &2005-07-14 &10:32:01 &2005-07-14 &10:32:01 &E &68F42C5021041447A946ED8C235BE538 &010515c270e1ca246e14 & & &NEW_PROTOCOL & &0000000000 & &0000000016 &
CONTAINERS&0&1A69636588A0824F954BEEE1ED4CF70C & &DUMMY_VALUE &0000000009 &TASK &
CONTAINERS&1&1A69636588A0824F954BEEE1ED4CF70C & &HH_SCENARIO_ID &0000000005 &02 &
CONTAINERS&2&1A69636588A0824F954BEEE1ED4CF70C & &IV_ACTIVITY_DESCRIPTION &0000000011 &SCOTT"S TEST &
CONTAINERS&3&1A69636588A0824F954BEEE1ED4CF70C & &IV_ACTIVITY_TYPE &0000000008 & &
CONTAINERS&4&1A69636588A0824F954BEEE1ED4CF70C & &IV_FOLLOWUP_PARENT &0000000004 & &
CONTAINERS&5&1A69636588A0824F954BEEE1ED4CF70C & &IV_FROM_TIME &0000000002 &20050714143100 &
CONTAINERS&6&1A69636588A0824F954BEEE1ED4CF70C & &IV_OFFLINE_LUID_ACTIVITY &0000000006 &DD2912268524DC211A7D08B597FA26D2 &
CONTAINERS&7&1A69636588A0824F954BEEE1ED4CF70C & &IV_OFFLINE_TASK_FLG &0000000010 &X &
CONTAINERS&8&1A69636588A0824F954BEEE1ED4CF70C & &IV_PRIORITY &0000000003 & &
CONTAINERS&9&1A69636588A0824F954BEEE1ED4CF70C & &IV_REASON &0000000013 & &
CONTAINERS&10&1A69636588A0824F954BEEE1ED4CF70C & &IV_STATUS &0000000012 & &
CONTAINERS&11&1A69636588A0824F954BEEE1ED4CF70C & &METHOD_NAME &0000000000 &CRM_WAP_GO_TO_ACT_SAVE &
CONTAINERS&12&1A69636588A0824F954BEEE1ED4CF70C & &RETURN &0000000000 &EWAF 001Method CRMHH_SYNC_PLAYBACK could not be executed &
CONTAINERS&13&1A69636588A0824F954BEEE1ED4CF70C & &SESSION_ID &0000000007 &E386F8910CD7AEA7566E23893E9FD298 &
CONTAINERS&14&1A69636588A0824F954BEEE1ED4CF70C & &SYNCUSER &0000000000 &SERVICEREP2 &
CONTAINERS&15&1A69636588A0824F954BEEE1ED4CF70C & &TRANSACT_ID &0000000001 &4414029B1CE282C2D5C13E8F81D9A0E6 &
CONTAINERS&16&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &ACTIVITY &0000000006 &dummyValue &
CONTAINERS&17&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &ASSIGNMENT &0000000005 &dummyValue &
CONTAINERS&18&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &ATTENDANCE &0000000003 &dummyValue &
CONTAINERS&19&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &A_TO_Z_GROUPS &0000000010 &AE,FJ,KO,PU,VZ,09 &
CONTAINERS&20&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &BP &0000000008 &dummyValue &
CONTAINERS&21&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &HH_SCENARIO_ID &0000000004 &02 &
CONTAINERS&22&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &LANGUAGE &0000000009 &EN &
CONTAINERS&23&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &METHOD_NAME &0000000000 &CRMHH_SYNC_SELECT &
CONTAINERS&24&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &PACKED &0000000011 &dummyValue &
CONTAINERS&25&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &PRODUCT_SRV &0000000002 &dummyValue &
CONTAINERS&26&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &RETURN &0000000000 &EWAF 001Method CRMHH_SYNC could not be executed &
CONTAINERS&27&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &SESSION_ID &0000000007 &E386F8910CD7AEA7566E23893E9FD298 &
CONTAINERS&28&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &SYNCUSER &0000000000 &SERVICEREP2 &
CONTAINERS&29&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &TIMESTAMP &0000000012 &1121351528732 &
CONTAINERS&30&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &TRANSACT_ID &0000000001 &5422A97279A1E29F0849B9F2AA392DFC &
CONTAINERS&31&BCBBE9B9FCBC1A4BAB38DD8F67369DDA & &VERSION &0000000013 &SP11 &
[20050714 10:32:16:433] D End of content of file ''C:\Program Files\SAPMobileEngine\sync\(SHARED)\inbound.sync''

Hi, the message
RETURN &0000000000 &EWAF 001Method CRMHH_SYNC could not be executed
indicates that the corresponding function module from BWAFMAPP for CRMHH_SYNC could not be executed, probably due to that fact that either in table MEMAPPDEST, the RFC destination is maintained incorrectly, ot the RFC destinatio nis down, or the function module is not RFC enabled in the CRM system (chec kfruntion module properties for this one).
Cheers, Stefan

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Complex Data in Mobile Services?

I'm trying to learn Azure Mobile Services, and feel like I must be missing something. I've gone through the tutorials, and they all seem a little too trivial to be helpful.
I have a data model that, by traditional standards, isn't all that complicated, but seems to be for Mobile Services. It's a reasonably straight-forward relational data model. Whereas this is something that I would normally have designed in Entity
Framework, I'm trying to follow the "Mobile Services methodology". I was able to create the data model in code reasonably easily, with all the classes inheriting from Microsoft.WindowsAzure.Mobile.Service.EntityData. It seems a bit
of a step backward not to have something like the Entity Framework data model designer, but I got through it. The database appears to get created correctly in Azure. So far so good.
Now I want to consume the mobile service in a client. This is where my frustration starts. Whereas in the past there were RIA Services or a WSDL to provide the data model of the service (i.e. essentially code-gen the proxy), it appears that I
have to code everything on the client by hand again! Is that true?! From what I can tell, I can't even share the code between the server and the client. Am I missing something?
Then, after I write a LOT of essentially duplicate code, I give it a try and find out that there is simply no support for navigation properties (i.e. foreign keys, etc.). I have to code all of that myself, likely using an automapper. Once again
I say: am I missing something?
Please tell me there's a better way, because right now this all feels like numerous steps backward!
Thanks!
Brad.

You are right that there is less functionality as compared to RIA Services: this is by design. The Mobile Services tables endpoint and the client SDK are designed to be as simple as possible. This keeps your mobile client logic simple, and makes it easier
to build a cross-platform app. For instance, if you were building a native iOS and Android client, there's no way to get around the code duplication.
However, connecting to the tables endpoint is very easy using the SDK, and then you just use LINQ to run queries on your service. You can also use offline data sync to cache the data locally, and even update it while you are offline and sync changes later.
(This is another case where the simple data model is a big advantage.) Plus, there's no codegen to bloat your client app. The only thing you need to manage is the table name, but this is an API that doesn't tend to change often (usually only additions).
For a more complex example of Mobile Services, see our Field Engineer solution accelerator, which is a full-fledged app:
https://code.msdn.microsoft.com/windowsapps/Field-Engineer-501df99d
You're right that you can't share code for your model classes between client and server, other than copy and paste. :) There's another good reason for this: the backend adds several system columns that are needed for things such as offline sync
and conflict handling. So, you have to inherit from EntityData (or IEntityData), whereas the client has no such requirement. This can actually give you a lot of flexibility. however. For instance, maybe you only want 5 database columns, and there are 20 in
your model. You can create different models on the client and backend to handle this.
We don't support foreign keys, which definitely makes things harder. Unfortunately, supporting relationships would mean the full complexity of RIA Services on all 5 of our client platforms, which just wasn't feasible.
As you noted, you can use Automapper, or, if your relationships are mostly 1-to-many, you can use database views and modify those directly. They can also be synced. If this works for your data model, it can also really simplify your client code, since you
only need very simple queries on the client. For an example of this, please see my posts in this forum thread:
https://social.msdn.microsoft.com/Forums/azure/en-US/4c056373-d5cf-4ca6-9f00-f152d2b01372/best-practice-for-syncing-related-tables-in-offline-mode?forum=azuremobile
I totally agree with you that not having support for relationships makes the developer's life much harder, particularly if the model is not a good fit with automapper. But on the other hand, you get offline data sync for free, which would otherwise be a
lot of work to implement.
In order to determine if Mobile Services is the right fit for your project, you should look at all the features in the client SDK and estimate how much work it would be to do it all yourself. If you don't need most of the features, it's possible that you
can just use Web API and all the features of Entity Framework. However, if you need things like offline data sync, login, or push notifications, the SDK can be a time saver.

Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App

I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!

Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman

Need to assign follow up activities to Service Quotations

Hi All,
can any one give me soluton on
Need to assign follow up activities to Service Quotations (Create Service Quotation type "ZAV"...transaction code VA21. Need quotes to print out 90 days before service is due again in the following year.
Thanks in advance.

Have you already customized Copy Control for your Service Order? If you want to add other transaction types the setting is necessary.
The customizing path is shown as below.
SPRO
-> CRM
-> Transactions
    -> Basic Settings
      -> Copying Control for Business Transactions
        -> Define Copying Control for Transaction Types
Regards,
Web

How to Use Mobile Service in HTML/JavaScript Application

The Windows Azure Mobile Service is a back end tool for mobile applications. It supports various platforms, such as Windows Store, Windows Phone 8, iOS and Android. The Windows Azure
Mobile service can also support HTML/JavaScript. This article helps you to get a basic idea of how to use the Windows Azure Mobile Service in HTML/JavaScript applications.
Let us start with a Quick startup project provided by Microsoft. A Quick startup is a simple demo project that can help us to understand how to use the Windows Azure Mobile Service with HTML/JavaScript. So let's start from the Quick startup project.
Login into in the Windows Azure portal and use the following procedure.
This article assumes you already have a Windows Azure account and the mobile service is enabled in your account.
1. Create a new Windows Azure Mobile Service
Click on the +New button from the left corner and select Compute -> Mobile Service and then click on the "Create" button.
The Windows Azure portal popup creates a mobile service wizard when you click the Create button. Windows Azure asks you to enter the mobile service name as shown in the following image:
Select the database options and region for your mobile service and click on the "Next" button.
Once your mobile service is successfully created, the portal will show all your mobile services as shown in the following images.
Ok! We have created a new mobile service successfully. Let's move to our subsequent steps.
1. Quick startup Project
As we all know, the Windows Azure Mobile Service can support many platforms such as Windows Store, Windows Phone 8, iOS, Android and HTML/JavaScript. This article only tells us about the new HTML/JavaScript platform that is recently added to the Windows Azure
Mobile Service.
In the image above, we are in the quick startup page where the Windows Azure Mobile Service allows the user to choose their platform. I have selected the HTML/JavaScript Platform.
In the image above, we found 3 quick steps that can allow us to run <g class="gr_ gr_74 gr-alert gr_gramm Grammar" data-gr-id="74" id="74">a HTML/JavaScript</g> sample project.
1. Create Table: In this step the user needs to create a table that can used by the sample project, once you hit the create TodoItem Table button. The Portal will create a TodoItem table in your mobile service. You
can check this table by clicking on the data tab(menu).
2. Download and run your app: In this step the user needs to download the Quick startup project that is provided by the Windows Azure portal. Click on the "Download" button and download the project. You will
see the following files in the quick startup project.
The Server folder contains some files to setup this project locally. The user should run the file from the server folder corresponding to their OS. I am using Windows OS so I ran the <g class="gr_ gr_80 gr-alert gr_spell ContextualSpelling ins-del multiReplace"
data-gr-id="80" id="80">lanch</g>-<g class="gr_ gr_79 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="79" id="79">windwos</g> file to setup this project locally in
IISExpress.
Press r and enter the key, you will see IISExpress started. Do not close this Windows and open your browser and request the http://localhost:8000/ page.
Enter the Item name and click on the add button. Your Item will be added to the TodoItem table.
3. Configure your host name: This step is a very important step for any HTML/JavaScript application that uses the Windows Azure Mobile Service. In this <g class="gr_ gr_83 gr-alert gr_gramm Punctuation only-ins
replaceWithoutSep" data-gr-id="83" id="83">step</g> the user must register their website name in the Cross-origin resource sharing (CORS). By default, "localhost" is added by the Windows Azure Mobile Service
so your quick startup project can run without making any CORS setting changes. The user can add their website domain name by clicking on the configure tab (menu).
The user can add as many website domain names as needed.

are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

How to delete a file in blod storage using mobile service

This
link shows how to add a file using windows phone 8 mobile service. I would like to know how I can delete the file once it is stored in the blob storage. I have typed following codes by using existing resource name and image url after the file has been successfully
uploaded and although I do not receive any errors, the file does not get deleted in the storage either:
CloudBlockBlob blobFromSASCredential =container.GetBlockBlobReference(todoItem.ResourceName);
await blobFromSASCredential.DeleteAsync();
Can anyone help? I am using 3.0.2.0 Thank you.

Hi,
If use above code to delete other blob file, does it success? see more:
how to delete azure blob storage , please consider this factor, Storage Emulator 2.2 is currently incompatible with Storage Client Library 3.0.0.0. This has been mentioned in Storage Team Blob as well:
http://blogs.msdn.com/b/windowsazurestorage/archive/2013/11/27/windows-azure-storage-release-introducing-cors-json-minute-metrics-and-more.aspx (Please read "Storage Emulator Guidance" section towards the end of the post). and there is a
beta version of the next storage emulator available that does work with v3 of the storage API dlls: http://blogs.msdn.com/b/windowsazurestorage/archive/2014/01/27/windows-azure-storage-emulator-2-2-1-preview-release-with-support-for-2013-08-15-version.aspx .
If I misunderstand, please feel free to let me know.
Hope this helps
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot connect to Azure Mobile Services as DataSource

I've created an Azure Mobile Service which is using .NET backend.
Project Siena isn't able to connect or work against this kind of data source.
Error message is
An error occurred connecting to Azure Mobile Service
I have also tried to create zz_config support table, and implement a custom TableController for serving the URI
tables/zz_config but I could only got few steps further, still without the possibility to read and use the model exposed by Mobile Services
This behavior has been reproduced with both Beta 2 and Beta 3
P.S. Adding the AMS as REST data source makes possible to import and use the model exposed. The operation of association in this case must be done per-table in Siena
Wheb can we expect Siena to work well together with the new version of Azure Mobile Services?
Massimo Prota
.NET MCAD - SP2007 MCTS - SP2010 MCPD and MCITP
My blog: http://blogs.ugidotnet.org/mprota - Twitter:
@massimoprota

Yes, that article is indeed precise and updated. I followed all steps described properly, especially for the part about setting up the database structure, and create
zz_config table (second post of the series)
I can connect to AMS (JS Backend) with Siena, but tables' names aren't showing up correctly, but display as
undefined, and from there on doesn't work properly.
JSON object returned from GET /tables/zz_config?$filter=(Key%20eq%20'table')
"id": "ccb9c9a8-9bae-41c8-87aa-277e2e0d1379",
"key": "table",
"value": "users"
I do confirm I have the same (incorrect) behavior using a .NET Backend where I set up
zz_config table and create a TableController mapped with it; with route
tables/zz_config
I confirm also I had the same behavior this morning with Beta 2, before I installed Beta 3.
P.S. The error message reported in my first post is returned only when the table
zz_config isn't setup correctly on AMS
Massimo Prota
.NET MCAD - SP2007 MCTS - SP2010 MCPD and MCITP
My blog: http://blogs.ugidotnet.org/mprota - Twitter:
@massimoprota

Installing Mobility Service 2.0

So I download the iso. When I get to the point in install where it says "select Local ISO image and click next" the ISO will not load. Screen locks up. System is running Server 11 sp1. Help.

On 06/12/2013 14:56, DSWbedrijven wrote:
> Install SP2?
> https://www.novell.com/documentation...eq_server.html
Yes, GroupWise Mobility Service 2.0 is only supported on SLES11 SP2 &
SP3 and not SLES11 SP1 as mentioned in the original post.
I seem to recall a bug within YaST on a previous version of SLES
relating to selecting an ISO although I'm sure that's not the reason why
SLES11 SP1 isn't supported - that's to do with SLES11 SP1 no longer
being supported by SUSE (and SLES11 SP2 also soon won't be supported).
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.

Apple mobile service doesn't work

hi,
from some reason when I plug my iphone 6 to my computer, I get this message-"Apple mobile device service could not be started because an unknown error occurred (1058)".and then I get a follow up message-"this iphone cannot be used because the apple mobile device service is not started".
I followed the orders in the website how to start the apple mobile service, but I get this message-"the apple mobile device service on local computer started and then stopped.some services stop automatically if they are not in use by other services or programs".
I tried again and again to start the apple mobile service but it's just stop in the middle and I get this message. I reinstalled itunes twice but it's still doesn't work.
please help me I'm desperate!

Hey oommeerr,
Sorry to hear that you are having issues with your iPhone not being seen in iTunes because of the Apple Mobile Device not working. When you reinstalled iTunes, did you uninstall iTunes first? Take a look at the article below and uninstall iTunes and its associating software in the order that it lists and then reinstall iTunes. Let me know if this works out for you.
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
https://support.apple.com/en-us/HT204275
Take care,
-Norm G.

SQL connection errors when stress testing mobile service: SQL failure after 3 attempts

I have created a Mobile Service (node.js), which has been running for a few months with 50-100k api calls per day with no issues.
The usage of the service will be scaled up soon, and it will receive much higher traffic, so I am running stress tests (on a staging deployment of the same service).
The api in question queries data from the sql database that is attached to the mobile service, but caches the resulting data in a redis database for 5 minutes, so each call with identical parameters will not access the SQL database, just the redis cache.
My first test never has any problems:
Run a single api calls as fast as possible using the program wrk (https://github.com/wg/wrk). This test never has a problem, and I have run it an hour continuously with a sustained rate of 200 req/s and very few timeout errors.
The second test always causes problems:
I created a list of 5 different api calls to the same service (same endpoint, but different parameters), and I run those randomly interweaved as fast as possible. I use the program locust (http://locust.io) for this, spawing 10.000 clients at a rate of 500
per second. For the first few seconds everything goes ok, but then connections start failing massively.
I get mostly:
Error: SQL failure after 3 attempts. Error: [Microsoft][SQL Server Native Client 10.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond.
(SqlState: 08001, Code: 10060)
And I see this in the http response:
ConnectionError(ProtocolError('Connection aborted.', gaierror(8, 'nodename nor servname provided, or not known')),)
The strange thing is that since I am running the same five calls repeatedly, only the very first of each call will actually access the sql database, every subsequent call will just return data directly from redis, and not try to access the sql database at
all.
In the azure console for the sql database in question, I see 1860 successful connections and 11 failed connections, which does not explain the massive failure rate I am seeing.

Thanks for sharing your tips on this forum, as it will be useful for other users, that run into this issue.
Feedback like this will also help us improve error reporting in the next release, as missing class files in the packaged application is a common issue when developers are moving from the embeded oc4j instance packaged with JDewveloper to standalone instances.
-Eric

Very slow first Mobile Service call after one minute incativity

My mobile service api (basic tire) response about 30 sec delay for the first call. The subsequent calls are fine but the first call even sometimes times out. Which is totally unacceptable. The worse is that after one minutes inactivity it stars again.
It uses SQL Server (Standard tire) which is the culprit I guess. Because if I do a manual db query before
the time lag of the api call disappear. I set up automated api calls requesting db quires in about every minutes but did not helped. Looks like they are screened.
What should I do until I have enough customers to get an api call every minutes?
It's a quite important issue because due to the bad user experience the app will never have enough customers.

I have done a lot of testing to gain more accurate data about the case. It's quite time consuming because I have to wait some minutes after each testing. I focused this time only one of my stored procedure and measured it from the app, from browser and from
VS SQL Server and turned out I was wrong there is a similar significant time lag from all method and if I wait enough about half an hour in all method the stored procedure call will time out. Thus, the underlying issue is probably in SQL Server.
The VS SQL Server provides the following error massage:
Msg 4083, Level 16, State 1, Procedure likingProbability, Line 51
The connection was recovered and rowcount in the first query is not available. Please execute another query to get a valid rowcount.
The actual rowcount in the code:
SELECT @howGood = howGood FROM goodforme.Scans WHERE itemId = @itemId AND userId = @userId
IF (@@ROWCOUNT > 0 AND (@howGood = @MAX_RATE OR @howGood = @MIN_RATE))
BEGIN
SET @howGoodPrediction = @howGood
RETURN
END
For me it looks like the rowcount should be valid.
In the second call the response is valid but with huge delay like 20 sec, but in the subsequent calls it's linearly reduced to about 1 sec. And if the next call happens about 30 sec later the response will have increase again to about 10 sec time lag and so
on. Thank you for helping to solve the issue.

Assigning Helpdesk rights to Mobility Service WebConsole

Similar Messages

Maybe you are looking for