Assigning HR persons to work center

hello
What is the diffrence between assigning HR persons to Work center and assigning HR persons to capacity of work center. And what is the impact of these 2 assignements to capacity planning in activities in PS?
THX

hello
I have been still reading docs for this topics. Now yes you are right there are 2 places for adding HR to work center. As I have read there is a reason for this.
If you add HR to work center you will add people to work center indirectly. Now I'm not sure yet if I should add HR work center to work center and then add people to capacity in addition. But I will check it soon.
And the second way is to add people from HR to capacity directly.
The benefit for this second way - directly to capacity - is you can use capacity of added to work center people as standard capacity of this work center.

Similar Messages

  • How to assign a person to work center

    Hi All,
    Can you please let me know how to assign a person to work center?
    Regards,
    Nima

    Dear Nima,
    what is the exact query
    Go to
    Spro > Production > Basic data > Wrok center > determine person responsible
    click new entries & create
    Go to CR01, Basic data tab & in the field person responsible press F4 you can get
    List created in the above Spro
    Regards
    Madhu

  • CNR2-assign person to work center error: the cost center is deleted

    Hi guys,
    i have a problem with assigning a person to a work center using CNR2.
    i select the person and i add it but when i hit SAVE i get this warning message:
    "RP718: a segment could not be derived". the person will then be allocated to the work center BUT when i check in PA30 i can see that the persons cost center is DELETED :O.
    could you please help me with this? i tried a  lot of scenarios but i could still not find the answer.
    thanks,
    emi

    Hi
    Cost Center must be maintained for that person in HR master data. Please have your HR person look into this and maintain the data and try again. Cost center and Atype of that person would bring in actual costs (equivalent of hours) on the receiving objects when time sheet is being recorded.
    Regards,
    PSR

  • Factory Calender assigned to Plant & resource/Work center

    Hello,
    If we have assigned the Factory Calender "XX" which has 5 working day(Monday to Friday) with no Special rules & no Holiday Calender to Plant & "YY" Factory Calender to Work center which has 365 days working with no no Special rules & no Holiday Calender.Now, when MRP creates Planned Orders for FERT material It did not create it on Weekends(i.e. on Saturday & Sunday) though the factory calender assigned is  "YY" (which has 365 days working )in work center.Why?
    Actually it should have consider the Work center assigned Calender for Capacity planning & Schedulling purpose.
    If I assign the Factory Calender "YY"  to plant then it will create the procurement proposal on weekends which is not acceptable to external procurement MRP Controller as plant office works only 5 days.
    Please guide.

    Dear
    Goto CR02/03 , select the Capacity tabe "hat" and u will fined there is tabe "Available Capacity " .U have to maintain the Active version ok.
    Basically , the active version is used for scheduling and capacity planning. If you have not entered an active version, the standard available capacity is used, even if an available capacity version has been entered.
    At the same u have to check out the below requirement :
    you must maintain the following data in the capacity header:
    1.The grouping, that defines which shift sequences and shift definitions can be used to maintain the available capacity
    2.The number of the active version of available capacity
    3.The base unit of measure of the available capacity
    3.The factory calendar, that is the basis of the available capacity-Workcentre
    If you do not enter a factory calendar , the system uses the default calendar for the plant.
    I hope in your case , u have the shift sequence of 5 work days for the calander you have assinged in work centre .
    Please check all those n come back .
    Reward points if usefull.
    Regards
    Jia

  • Persons for Work Center

    Dear PM Experts,
    I'm finding it difficult to find the place to enter the persons for work centers.
    These persons are used in Order Operations (Go to Operations tab/Select the particular operation/Click Internal button at the button/Person No).
    Please provide me with the complete path and guidance.
    Cheers
    Deepal

    Yes Deepal
    It is required to maintain the HR data for linkage.I thought you already have Master data in the system.
    By the TCODE PA30 u need to maintain the personnel data before it is available for assigment.This is related to HR module
    Regards
    Jignesh

  • HR Assignment in Work Center

    Hi,
    We can assign the person in work center via HR assignment under capacity planning tab & it works for work force planning. But before going to capacity tab , we have one more tab for HR Assignment. Can you suggest what difference it will make if we assign the person under this tab.
    Thanks...
    Ashok Sangal

    Its grouping the person in Organisational units w.r.t HRMS. Both will appera during work force planning under different groupings.
    Regards
    soundar

  • HR assignment to Work center

    Hi All,
    I am having few queries with the above subject.
    My customer is asking that he will assign persons(from HR) to the work centers. and based on the assignments done he want some functionality like
    1. At the time of operation confirmation through CO11N in the person field only assigned persons(in Work center) should be available
    2. At the time of capacity availability check system should check the person attached to  work center only. e. g. suppose two persons for 8 hrs are assigned to work center then if order need 18 labor hours, in this case system should tell that capacity is not available. and then if third person added to Work center master then it will tell capacity is available.
    Now my question is :
    Whether above requirements are possible? if yes then please please tell me how to do?\
    Millions of thanks in advance.

    Hi Jigar B patel,
    Well Work center is the main integration part for both PP and HR OK.
    As your requirement is to maintain the responsible person for the work center follow the path:
    1) SPRO -
    > PRODUCTION -
    > BASIC DATA -
    > WORK CENTER -
    > GENERAL DATA -
    > DETERMINE PERSON   
        RESPONSIBLE. 
    2) GO TO THE PARTICULAR WORK CENTER YOU ARE USING THROUGH T-CODE CR02 OR CR03 OK.
        THEN GO TO THE TAB CAPACITIES TAB DOWN THERE ARE PUSH BUTTONS THE VERY FIRST ONE IS CAPACITY BUTTON
        PRESS IT -
    > YOU WILL GO TO CAPACITY HEADER SCREEN -
    > ON THE TOP YOU CAN FIND PUSH BUTTON CALLED
        AVAILABLE CAPACITY PROFILE -
    > ON THE TOP OF THE YOU CAN SEE A GRAPHIC PRESS IT THERE YOU CAN GET AN
        IDEA OK.
       I hope it helps you.
    Regards,
    Madhu.G

  • Assignment of activity group to work center

    Hi,
    We want to assign activity type to work center more than six,
    how we can assign activity type more than six to work center?
    i have created activity type group in klh1,
    in activity group i have assigned activity type more than six,
    How we can assign activity type group in work center?
    Regards
    Gajjen

    HI
    It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
    Check with the business process field for assign  with your CO guy in thw WC.
    A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
    When executing a business process, activities can be utilized for several cost centers of a controlling area.
    Check and revert
    Regards
    Anupam Sharma

  • Assign Employee to Work Center Vs Project Team

    Hi Experts,
    I would like to ask you what are the main implications of assigning employees to the project using "Project Team for WBS element" instead of assigning them directly to the Work Centers?
    Thanks

    Project team assigned to WBS element is available for use in all the work center of activities under this WBS. While if you assign a resouce to work center it is automatically available for project team if you want so.
    While when you assign people to work center,  then resource planning and capacity levelling is at more microlevel (network activity level).
    The workcenter-personnel number is more rigid assignment than assigning a project team to WBS element.
    There might be some more points which can have difference in both the process. I expect  otherw will also express their views about them.
    Regards,
    Mahendra

  • Work Center Integration PM-PP

    I have 3 similar Production Machines. I will load any or all of them according to the requirement or acc. to which machine is free.
    so PP person says, he has to assign only one Work Center to all the three machines as he can not assign more than one Work center for a single Operation in Routing.
    But in PM, 3 machines will have 3 different Equipment numbers with common Production Work Center (Work Center at Location tab page)
    If I block any one of the machines for Maintenance, that work Center will get blocked. But physically remaining two machines are free. But PP person can not dispatch the Order as work center is blocked.
    Plz guide how to proceed

    hi,
    SAM,
    For 3 production machines PP Persone should create 3 pp workcenters......,
    as far as my knowledge is concern in standard SAP this is not possible.....
    although Capacity spiliting option is available in PP workcenter.
    but that dosn't solve our proble..
    if u set system condition - not in operation for a equipment
    .. this will capture whole PP work center..... rather than perticular equipment.
    Try to conyence them for 3 pp workcenter.
    regards,
    Amit kushwaha

  • Work center & operation

    Hi,
    Please clarify my following issue:
    We are having Two plants which are controlled by one shift incharge, Each plants has one operator, Each plant has permanent workers and has contract workers.
    So please confirm where should I allocate operator in operation 1, 2 & 3. And also confirm where should i mention shift-in-charges as he is common for both plants.
    Refer below screen shot for more clarity.

    Hi,
    You can enter shift in charge in Person responsible field in basic data tab in work center..
    Assign the operator details in HRMS data as shown below in work center...
    For this you need to have HR module implemented in your system...take the help of HR consultant for the employee details and then assign them in the work center...
    Thanks
    Kumar

  • Work center wise authorization

    Hi all,
        Our client requirement is restrict users from doing operation confirmations on limited operations which are linked to certain work centers.
    For ex. If  D10DDL, D20DDL, D30DDL & M10PPL, M20PPL, M30PPL are work centers. The 'user 1' is allowed to do operations confirmations in which D10DDL, D20DDL, D30DDL are there. Other than 'user 1' no one should be allowed to the confirmations of D10DDL, D20DDL, D30DDL. Same with 'user 2', he should allowed for operations in which M10PPL, M20PPL, M30PPL are there.
    How to map the same? Kindly help. Useful answers will be rewarded.
    SmanS

    Hi SmanS,
    I am not a basis person, so i really cant give you a step by step procedure. But in general it is done in PFCG t-code, the object has a few fields & in this case the object -> C_AFVG_APL has fields WERKS, ARBPL, PS_ACTVT.
    So you need to assign the values of work center to ARBPL & plant to WERKS, then create different profiles & based on your need, have to assign it to the respective users. Also you need to ensure that this object is checked in the respective t-codes.
    Well if you feel you have got a solution which you can work on, award points & close this thread & check the basis forum, maybe someone there can help you.
    Regards,
    Vivek

  • More than one work center for one operation

    Hi Experts,
    Is it posssible to assign more than one work center to one operation,in a maintenance order?
    for example if head fitter and helper has executed maint.activity,how we can do this
    Thanks in advance
    Regards
    Prashil

    Dear,
    You cannot assign more then one workcenter to a one operation.
    But you can assign to a sub operation,i.e to operation one workcenter and to suboperation anotherworkcenter.
    For Sub-operation:
    Go to task list change >>> Operation tab.
    Let say your first operation number is 0010. Then below it for next operation change operation number to 0010 and next to it there is field for sub-operation give there number 0001 or 0010 as per your requirement. Select suitable control key and work center, give description and press enter. your sub operation 0001 will be created for operation 0010.
    I hope it will solve your query,
    Thanks,
    Mohit

  • Work center reporting

    Hi,
    In our system in transaction OP4A lot of ‘Shift definations’, ‘shift sequences’ are maintained unnecessary. We want to clean this data (Remove unwanted).
    Is there any report available for work center like 'where used' function to identify shift pattern, sequences used in system so that I can remove other data.
    Regards,

    Hi Caetano,
    Thank you for your help, as you suggested I can check 'Shift Sequence' at table level.
    Still the problem is we have to remove unnecessary shifts defined in system and it is possible to assign defined shifts to work center intervals directly means without giving 'Shift sequence' as input.
    Is there any table available where I can get the 'Shifts' assigned to work centers?
    Regards,

  • Work Center Hierchy

    Dear All,
    I created a workcenter hierarchy UNIT - 1 and into that assign A1 , A2 , A3 work center now going for a CM01 Transaction to see a available cumulative capacity for that make setting in general tab like
    Hierarchy , Plant and check tick box Cumulation of requirement , Cumulation of capacity
    and execute the transaction but system gives message like "There are no capacity requirements for the current selection and settings "
    Guide me accordingly
    Regards,
    Murari Shah

    Dear Canan ,
    Thanks for your reply I created a new profile as u say and go to transaction CM01 and select the option profile as you said but i recieved the system msg like "The hierarchy  does not exist in plant 1001" but i already created a hierarchy in that plan
    Pls guide me accordingly
    Regards,
    Murari Shah

Maybe you are looking for