Assigning large number if character to a Codepage

Do we have a tool / process which can assign large number of character to a code page, which cannot be done by SAP SPUM4. There are 18 languages and 10 code pages.
Languages listed below,
French,English,German,Italian,Spanish,Portuguese,Bulgarian,Japanese,Chinese,Danish,Russian,Dutch,Finnish,Malaysian,Czech,Hungarian,Norwegian,Swedish
we run SPUM4 in our Development Environment and found 450.000 words without a language associated. This corresponds to 2,5 months of movements from our ERP productive clients. After applying a dictionary and language patterns provided by SAP, we have now 274.000 words left (and 150.000 duplicates). I need to find other ways to decrease this number so that I end up with a workable list of words.

There is no method but assigning them more or less manually or using hints.
You may check for special characters in languages, e. g. the polish ł will be displayed as ³ when you login in English - although this may also be a different character.
We had the same "problem" with 8 languages (including more than one Asian language) so it was cumbersome.
Markus

Similar Messages

Hello , FMS is how to prevent the client into a large number of bytes?

Hello , FMS how to prevent the client to pass a large number of bytes , such as one person put a 1G file in the argument , I also silly to receive ?Although there Client.setBandwidthLimit ( ) limit his maximum traffic per second , but is there a way , one more than the maximum amount of bytes to disconnect his.I assume that methods to determine the length is also obtained all of his transfer is finished , in order to determine out of it .

How to limit the size of the parameters of the method.I wrote a method in the main.asc then the client NetConnection.call assignment, but if the client is malicious to upload very large data, how to limit it, I view the document did not find the clues, I hope that those parameters up to100KB.

Large number of attributes reduces data display in Query (PLS HELP).

Dear Guru's
We have newly upgraded our system to 7.0, Currently i have a Query based on master data info object(0 equipment) which contain several attributes, due to huge number of attributes, i cannot see data for few attributes( Ex:-0service descrip), but data exists for these atrrib, when i check in RSA1. my client want to use heavy number of 0Euipment numbers(nearly 10000) in selection screen. thats the reason for data not to be seen.
WE are under SP 16 also(Note 562162 - Additional selection of attribute reduces query result set is allready exists), and did not found any proper note.
So guru's can any one please tell me how i can get the data in Query for these attribute by keeping the same selection option for Equipment numbers (10000).
Dude's give me some good suggestion please...client is waiting from 1 week
Thanks in adv
Dev
Edited by: Srinivas dev on Jun 10, 2008 11:52 AM

Dear Yogesh,
Thanks a lot dude...
I assigned points for your kindly help....
Got any idea about by initial post Large number of attributes reduces data display in Query
Thanks and Regards
Dev

Large number of http posts navigating between forms

Hi,
i'm not really a forms person (well not since v3/4 running character mode on a mainframe!), so please be patient if I'm not providing the most useful information.
An oracle forms 10 system that I have fallen into supporting has to me very poor performance in doing simple things like navigating between forms/tabs.
Looking at the java console (Running Sun JRE 1.6.0_17), and turning on network tracing, I can see a much larger number of post requests than I would expect (I looked here first as initially we had an issue with every request going via a proxy server, and I wondered if we had lost the bypass proxy setting). Only a normal number of GETS though.
Moving to one particualr detail form from a master record is generating over 300 post requests - I'v confirmed this looking at the Apache logs on the server. This is the worst one I have found, but in general the application appears to be extremely 'chatty'
The only other system I work with which uses forms doesn't generate anything like these numbers of requests, which makes me think this isn't normal (As well as the fact this particular form is very slow to open)
This is a third party application, so i don't have access to the source unfortunately.
Is there anything we should look at in our setup, or is this likely to be an application coding issue? This app is a recent conversion from a forms 6 client server application (Which itself ran ok, at least this bit of the application did with no delays in navigation between screens).
I'm happy to go back to the supplier, but it might help if I can point them into some specific directions, plus i'd like to know what's going on too!
Regards,
Carl

Sounds odd. 300 Requests is by far too much. As it was a C/S application: did they do anything else except the recompile on 10g? Moving from C/S to 10g webforms seems to be easy as you just need to recompile but in fact it isn't. There are many things which didn't matter in a C/S environment but have disastrous effects once the form is deployed over the web. The synchronize built in for example. In C/S calls to synchronize wasn't that bad; But when you are using web deployed forms...each call to synchronize is a roundtrip. The usage of timers is also best kept on a low level in webforms for example.
A good starting point for the whole do's and dont's when moving forms to the web is the forms upgrade center:
http://www.oracle.com/technetwork/developer-tools/forms/index-095046.html
If you don't have the source code available that's unfortune; but if you want to know what's happening behind the scenes there is the possibility to trace a forms session:
http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/tracing002.htm#i1035515
maybe this sheds some light upon what's going on.
cheers

Project Server 2010 - large number of security categories

I am searching for somebody who has experiance with a large number of security categories.
I am talking about a number of 1000 different PS security categories in one instance.
Beside the forseeable usability issues, are there any technical side effects which could appear?
Thanks in advance for your feedback

Hi,
thanks for your reply, specially for the technical remark what I was looking for.
Ofcause we have investigeted in all other options (RBS, ProjectsPermissions, simplify the security concept, discussed the requirements and discussed the process, trainings, departments).
Finally we have for this customer the challange to have multiple roles in multiple projects. But with the restriction not to add some permissions based on the different roles and the Project Server Standard security options.
One example: We have a user which has two roles (commercial manager and team member). The role can only be assigned to the projects team because all other options are not possible (owner, status manager and all RBS options). This user must act in the first
project as a commercial manager with more rights then when he is assigned in a second project only as a team member. No greyzone is allowed.
The final analyses for this requirement was (and I dont beleive there is an other possible way):
Define for each commercial manager a own security category and list the projects where he can act as a commercial manager.
Remember: All other ProjectServer security possibilities are impossible ( in our point of view).

Reassigning A Large Number of Customers To A New Collector

Hello,
We recently hired a new collector and want to reassign a large number of customers to this person. Is there a more efficient way to do this than case-by-case?

Hi, you should take a look at transactions:
UDM_BP_GRP - Change to Segment Data
UDM_BP_SPEC - Assignment of Collection Specialists
There you could assign a new specialist to the BPs or replace an existing specialist with the new one.
Best regards,
Cristobal Fuentealba.

How to change Org Unit for larg number of emplyees

Dear Guru's,
My client has uploaded wrong Org Units while hiring, now that has to be changed for larg number of employees.
Can any one suggest me how can we do this for larg number of employees?
Thanks in advance for your kind suggestions.
Regards,
Srinivas

Hello Srinivas;
By saying uploaded wrong organizational units, do you mean that organizational structure in PPOME is wrong or employee - position assignment is wrong?
If employee - position assignment is wrong then I suggest you to use batch input program or use LSMW as you have to change it via personnel action - PA40
If organizational structure is wrong, then do you have correct organizational structure in another system like test or qa?
If you have correct organizational structure then you can directly transport it from one system to other but if you don't then you first need to correct the organizational structure and then run LSMW or batch input.
Regards;
Okan

Mail - how to send to large number of recipients?

How can I send an email to a large number of recipients that I hold addresses for in a document without a) adding them to my contacts, and b) so that they can't all see each others addresses?

I thought about using BCC, but it seems a little messy although it would do the job.
Messy how? That's exactly what it's for. In fact, there's no other way to hide addresses from other recipients of the message. The only other way to do it would be to script automated sending of one message per address, and that would get quite messy!
What is the maximum number of recipients that Mail can handle?
There's no limit enforced by Mail, AFAIK. The limits come from the SMTP server you're using.
One of the issues I had when using Outlook on Windows for this by copying and pasting from a text document, was that if there was an invalid/non-existent address in the list, it would just return an error and I was never quite sure if the whole thing didn't send, or if it was just to the dodgy address(es).
In Mail, you'll just get a bounce message for any addresses that don't exist. The one exception to that is addresses on the same server that you're sending from... often, the server will simply reject the attempt to send to an address that it knows doesn't exist. I'm not sure what kind of message the server returns in that case, though, and suspect it depends on the server. It's been a while since I've seen such a problem.

Add tcode to large number of roles

Hi all,
Is there a way to add a tcode to large number of roles (around 20) using pfcg? It would be great if I can do it once instead of modifying role by role.
Thanks.

Yes, You can actually write a ABAP program, but bottom line is that you cant edit more than one role at a time in PFCG.
The program would also have to edit one role at a time

How to handle a large number of query parameters for a Browse screen

I need to implement an advanced search functionality in a browse screen for a large table. The table has 80+ columns and therefore will have a large number of possible query parameters. The screen will be built on a modeled query with all
of the parameters marked as optional. Given the large number of parameters, I am thinking that it would be better to use a separate screen to receive the parameter input from the user, rather than a Popup. Is it possible for example to have a search
button on the browse screen (screen a) open a new screen (screen b) that contains all of the search parameters, have the user enter the parameters they want, then click a button to send all of the parameters back to screen a where the query is executed and
the search results are returned to the table control? This would effectively make screen b an advanced modal window for screen a. In addition, if the user were to execute the query, then want to change a parameter, they would need to be able to
re-open screen b and have all of their original parameters still set. How would you implement this, or otherwise deal with a large number of optional query parameters in the html client? My initial thinking is to store all of the parameters in
an object and use beforeShown/afterClosed to pass them between the screens, but I'm not quite sure how to make that work. TIA

Wow Josh, thanks. I have a lot of reading to do. What I ultimately plan to do with this (my other posts relate to this too), is have a separate screen for advanced filtering that also allows the user to save their queries if desired.
There is an excellent way to get at all of the query information in the Query_Executed() method. I just put an extra Boolean parameter in the query called "SaveQuery" and when true, the Query_Executed event triggers an entry into a table with
the query name, user name, and parameter value pairs that the user entered. Upon revisiting the screen, I want the user to be able to select from their saved queries and load all the screen parameters (screen properties) from their selected query.
I almost have it working. It may be as easy as marking all of the screen properties that are query parameters as screen parameters (not required), then passing them in from the saved query data (filtered by username, queryname, and selected
item). I'll post an update once I get it. Probably will have some more questions as I go through it. Thanks again!

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

I am trying to delete a large number of songs from my Itunes library without having to delete them one at a time. How do I do that?

I am trying to delete a large number of songs from my itunes library without having to do it one at a time. How can I do this. All of my songs have check marks by them. Help!

Then I suspect you do not have iTunes Match enabled. Using that "delete all" command in the Settings does not remove the music from the cloud, nor does it disable iTunes Match. With iTunes Match enabled you will still see all the music.
So go to Settings > iTunes and App Store and make sure iTunes Match is set to ON (green).

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

How can I move a large number of pics from icloud Photos Beta to a PC without having to select each photo?

Hi,
can you please explain why the solution from steve is not the right solution for you.
regards
Peter

TS1702 how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

You don't need iTunes for that. Simply connect the iPhone to the PC where it will be recognized as a camera. You can then select the photos you wish to transfer, transfer them, and delete them.

Assigning large number if character to a Codepage

Similar Messages

Maybe you are looking for