Assigning mass variables

Inside a movie clip on the stage i have 15 more movie clips,
called box1 - box 15. inside each box instance is a text field
called date. i want to fill in the text field in box1 with the
current date, and box2 with tomorrow's, and so on. How can i assign
all of the dates without writing :
box1.date.text = (todays date)
box2.date.text = (todays date+1)
etc...
It needs to be that way, because I am later checking each day
against a slot in an array to see if I need to fill in the proper
info for that box.

try this:

Similar Messages

Unable to assign the variable value

Hi,
I am trying to capture the error message into a variable using statement in the Refreshing tab :
Select '<%=odiRef.getPrevStepLog("MESSAGE")%>' from dual
After getting the error log into variable, I am making a call to Scenario which will generate a file and email it stating the error log.
Now the issue is when i assign this variable to the Scenario variable it throws the following error:
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Invalid parameter
     at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
If i set the variable with any default value, it successfully makes a call to the scenario and generates the file.
Please help!
Thanks,
Ritika

Hi,
i created a variable and assigned the value to another variable in a procedure, am getting the following error, as it says in the error i don't have any ";" that is causing the problem.
the variable name is table_nm
inside the procedure am assigning the value to lv_table_nm :=#SESSNAME.table_nm;
If i change the variable name tos ome constant or any other value, the package is working fine. Any ideas why am getting error assigning the variable?
6550 : 65000 : java.sql.SQLException: ORA-06550: line 1, column 294:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
continue avg count current exists max min prior sql stddev
sum variance execute forall merge time timestamp interval
date <a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively
java.sql.SQLException: ORA-06550: line 1, column 294:
PLS-00103: Encountered the symbol ";" when expecting one of the following:

The assignment to variable x has no effect

public class A{
int x;
public static void main(String args[])
A a = new A();
a.someMethod();
someMethod()
x=x++;
System.out.println("Value of x...."+x);
I am getting warning that The assignment to variable x has no effect and the output i get is 10;
On the otherhand if i use x=(x=x+1) then i get output as 11 without any warning.
I think i am doing something wrong, but just cant figure out.
Someone please help

From a bytecode perspective, it looks like this:
int x = 0;   // iconst_0:    variables { }, stack {0}
            // istore_1:    variables {0}, stack { }
x = x++;    // iload_1:     variables {0}, stack {0}
            // iinc 1, 1:   variables {1}, stack {0}
            // istore_1:    variables {0}, stack { }

The type of the value being assigned to variable ... differs from the current variable type

I am trying to load a variable on SSIS Execute SQL Task with a string value. I keep on getting an error message :-
“The type of the value being assigned to variable “User::LegacyColumns” differs from the current variable type”.
Below are the settings on my package:
Execute SQL Task Result Set –
Single Row
Variable Data Type –
String
The data to be loaded on the variable is a single row shown below:
FirstName,LastName,MiddleName,PatientType,Title
Can someone kindly help me to solve this as I’m lost for ideas.
Thanks,
Mpumelelo

Thank you Sorna. I think I have managed to solve it. After a long search I have found a solution which advises that I should use a Foreach Loop Container. The help is on this link:
https://social.msdn.microsoft.com/Forums/en-US/f46dea91-c26b-4ffe-ab1c-ebeef57c90b6/error-0xc001f009-at-mypackage-the-type-of-the-value-being-assigned-to-variable?forum=sqlintegrationservices
Mpumelelo

How can I assign javascript variables to jsp or java variables.?

How can I assign javascript variables to jsp or java variables.?

See I have generated some variables in the javascript which is on the jsp page. I want to assgin these variables to the jsp vaiables. Or how can I access javascript variables from jsp on the same jsp page.

Can we set a variable by assigning another variable to it

Hi,
Can we set a variable by assigning another variable to it. If not how can we implement this.
Thanks
Madhavi

Hi Sutirtha,
My requirement is
step1 set VARIABLE1
step2 set VARIABLE2 = #VARIABLE1
step3 using VARIABLE2 in Interface to filter data
Now the value of VARIABLE2 contains #VARIABLE1. its not fetching the value of #VARIABLE1 because of this it is giving an error in the interface like "Invalid character".
Please check the step2, is that syntax correct?
--thanxs
Madhavi

Assigning loaded variables using loadvard

hi
i am using loadvars to load url encoded data from a php file.
when i trace the output it shows that the variables have been
retrived successfully.
now i need to use the values by assingning then to a
variable. i cant seem to get this going
i am using flash 8 with as2.
myVars.onLoad = function (success) {
if (success) {
trace (" variables loaded ");
ad1id.text = myVars.ad1id;
ad1src.text = myVars.ad1src;
clipid.text = myVars.clipid;
clipsrc.text = myVars.clipsrc;
ad2id.text = myVars.ad2id;
ad2src.text = myVars.ad2src;
} else {
trace (" Error loading variables ");
is the above method used for assigning the variables correct.
ram

The method look fine.
Inside the success if block, you need to trace the data:
trace("myVars:" + myVars);
trace("myVars.ad1id:" myVars.ad1id);
Also send the same inputs to the PHP script via an HTML form
or on the address line and see what is returned.

How to find if the PO is Standard Price or Account Assigned or Variable

Hi ,
How to find wether the PO is Standard Price or Account Assigned or Variable .
In EKKO, EKPO or any table ,are there any fields on which i can differentiate these PO's.
Kindly help.
Regards,
Chetan Sakunde

Hi,
In material master accounting view we can find whether the material of that PO is standard price or moving average price.
To find whether the PO is account assigned or not you can check in EKKN table.If the po is account assigned there will be entries in EKKN table for that PO.
If the PO is not account assigned there will not be any entries in EKKN table.

Preprocessor command, assigned the variable and then compare the variable to int. How can I get around this?

#define ON 1
#define OFF 0
in seperate code
int variable = ON;
variable is globally define for that module.
in seperate code
if (variable == ON)
the complier errors off on the if (variable==ON)
My guess variable is variable in of type int and ON is a preprocessor command. Therefore it is a mismatch and complier doesn't like it. How can I get around this.
thank
Mahen

Mahen
What is the exact message of the compiler?
I think the error is, that the compiler does not find the definition of ON
and OFF. Is it in the same source file?
If not, try to put it into an .h file and include it where you need it.
Stephan
"Mahen" schrieb im Newsbeitrag
news:[email protected]..
> Preprocessor command, assigned the variable and then compare the
> variable to int.
>
> How can I get around this?
>
> #define ON 1
> #define OFF 0
> in seperate code
>
> int variable = ON;
> variable is globally define for that module.
> in seperate code
> if (variable == ON)
> {
>
>
> }
>
> the complier errors off on the if (variable==ON)
> My guess variable is variable in of type int and ON is a preprocessor
> c
ommand. Therefore it is a mismatch and complier doesn't like it. How
> can I get around this.
> thank
> Mahen

How we can assign resultset variable to javascript variable

can any1 plsss
i want to assign resultset variable to javascript variable but it diagnosis some mesg like that
type can not resolved"
my code as follows
<%! ResultSet al=(ResultSet)request.getAttribute("mydata");%>
<script language="JavaScript">
<%--<% ResultSet al = (ResultSet)request.getAttribute("mydata");%>--%>
var alm=<%=al%>
function pass()
while(alm.next())
document.write(document.myApp.dataValidation(alm.getString("Login")));
document.write(document.myApp.dataValidation(alm.getString("Passwd")));
document.write("<br>");
</script>
<jsp:plugin type="applet" code="TestApp.class"
name="myApp"
codebase="http://localhost:8080/dbServlet/"
width="600"
height="80">
</jsp:plugin>
<input type="button" value="Click me!"
onclick="pass()" >

double post http://forum.java.sun.com/thread.jspa?threadID=5245891&tstart=0

Service Desk - need IB52 iBase "partner assignment" mass change

Dear Ladies and Gentlemen,
We are using SAP Service Desk in Solution Manager 7.0 EhP-1.
There are many satellite systems connected to SolMan using Service Desk.
Of course all of them are setup in SMSY, have a valid iBase entry in IB52, and have the "sold-to-party" assigned in IB52 -> Goto -> Partner.
Now we need to assign a new business partner as "sold-to-party" for all these systems.
We do not want to rename the current business partner, but have to assign a new business partner to not influence existing tickets.
Thus, manually we would need to go to IB52 and change the partner assignment in IB52 -> Goto -> Partner and enter a new value for all the systems.
Q: is there a way to perform a mass change for the "sold-to-party" partner assignment of the iBase entries? Is it possible to update or replace all or multiple existing partner assignments in iBase?
Many thanks,
Peter

Hi Christian,
Can you please tell me how did you create iBase for NON-SAP Systems? I know it is IB51/IB52? I am not sure what do you do after that? For an example I went to IB51 and create iBase number 403? now I go to IB52 and put the 403 in the installed Base field and click on Green arrrow to go inside correct? what do I do after that? where is the options to create the iBase name call "Network Group" ?
How did you solve your issue for not showing when you went to F4 in NOTIF_CREATE? was that authorization error? if yes, do you know the object name?
any help is much much appreciated
Thanks in Advance
Kumar

How to assign a variable value to crystal report viewer formula with CR2008

Hi ,
I am using crystal reports 2008 and i am not able to find how to assign variable value to crystal report viewer formula.
In CR 8.5 , i used to have crystalreport1.Formulas(0) = variable1
crystalreport1.Formulas(1) = variable2
but, i don't find similar kind in crystal reports 2008.
How can i achieve the same functionality using crystal reports 2008.
Thanks in Advance
Regards,
Ramnath

Hi,
Can i anyone help me out with this.
I am generating crystal reports in vb6 using CR 8.5 and vb6 and below is the code snippet for the same
CrystalReport1.Formulas(0) = "PrintTitle= '" & strMyTitle & "'"
CrystalReport1.Formulas(1) = "FromDate= '" & MskFromDate.Text & "'"
CrystalReport1.Formulas(2) = "ToDate= '" & MskToDate.Text & "'"
Please let me know how the same functionality can be achieved in VB.Net using Crsytal reports 2008
Any code snippet would be of great Help.
Thanks in Adnvance.
Ramnath

How to assign Javascript variable to ABAP variable

Hi All,
I have a requirement to create a page where each of the table cells will have drop down boxes with Red, Yellow and Green colors.
When the user selects the color it has to be saved to database.
Now the problem is, I'm using HTML as HTMLB was very complicated for the kind of layout the client needed.
I have created a onChange event for each of these drop down boxes (please keep in mind the dropdown ids are dynamically created by looping the ABAP internal table).
I'm passing this.id on change event and capturing the id name. Now using this id I have to read an internal table.
But the problem is, this is javascript variable and cannot be passed directly to read table statement.
Please help me in this regard.
Lots of points will be given for valuable inputs.
PS: I have gone through the thread Assign a Javascript variable value to a ABAP variable
But doesn't seem to work for my case as I'm using HTML.

Hi Chait,
you need to populate a HTML form field with the variable. Most commonly people use the...
<INPUT type="hidden" id="param1">
construct.
In your javascript you can then just set the value of param1.
Of course you could also dynamically create the elements at runtime in your javascript code.
Cheers
Graham Robbo

Can we assign jython variable value into ODI variable?

Hi Team,
We are trying to save jython variable value into ODI variable so that ODI variable can use in later steps.
we are facing failure regards same.
Please suggest us so that we can use ODI variable value in later steps.
Thanks
Ankush.

See if this post help you :- How to assign value for a ODI variable from Jython Script
Doc id 424579.1 on metalink should help.

How to assign local variable to global variable dynamically in adobe livecycle designer 7.1

Hi All,
i want to assign my textfield value to global variable dynamically.so that where ever i want , i will access my global variable.so it is possible in adobe livecycle designer 7.1. kindly suggest me method.Thanks in advance.
Thanks & Regards
Ganesh

Please remove all adobe livecycle designer versions from your local pc.
restart your pc to be sure, that all temp data is deleted.
download the newest ald version from service.sap.com and install it.
have fun with developing adobe forms with sap transaction sfp.

Assigning mass variables

Similar Messages

Maybe you are looking for