Assigning multiple areas to SVI's created on 6500 Switch

Hey, We are having Cisco 6500 Switch at aggregation layer where all our SVIs are created and we need to advertise them in OSPF for reachability purpose. Now we are using L2 campus model so access layer is not running any routing protocol but we need to segregate our SVIs traffic based on different buildings. We are doing this by assigning unique areas to a group of SVIs while advertising in OSPF. My question is, is this a recommended way ? or we have to advertise all the SVIs in Area 0? because we don't have multiple areas but still we are adding them while advertising at 6500 switch. Thanks.

Having said that, i am still confused whether is it a good approach or we should advertise all our SVIs directly into OSPF Area0.
Using an area per building seems unnecessary because all the L3 routing is done on the aggregation layer so it doesn't really make a lot of sense, at least to me.
I think using one area for all SVIs may be a good idea because then you can simply advertise one summary for the all the SVI subnets into area 0 towards the core.
This is assuming you can summarise all the aggregation IP subnets with one summary address.
Even that may not be necessary as it depends on the rest of your topology.
For example if your core connected multiple buildings as in a campus and each building had a distribution pair of switches connected back to the core then yes it would make sense to use an area per building/site and only advertise a summary to the core.
Up to you really.
Jon

Similar Messages

Unable to assign multiple company code to a controlling area in PPOME

Hi Experts
In PPOME I was trying to assign multiple company codes under 1 controlling area in account assignment. e.g. ABC is the company, its 2 company codes, ABC1 and ABC2.
In PPOME when I am assigning the root org unit (ABC) with controlling area ABC1 and company code ABC1, it hierarchially inherits the below structure.
Whereas when I want to change the company code for ABC2 orgunit, it doesnot give the provision to change. It hierarchially inherits the root org unit structure.
I have tried to differentiate it by creating different costcentres for different companycodes, but that also doesnot help to fulfill the need.
Please help me to solve the issue as early as possible.
Warm Regards
Anwi

Hi Rajdeep
The same function can be handled from PPOME also, because in case of assignment of enterprise structure components with org structure components we use IT 1008.
However, if yours process is followed, then also I am unable to change the COMPANY CODE. Rest can be well taken care of.
Cheers
Anwi

RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs

Could someone please tell me is this 100% correct?
"RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs"
Any ideas why? Does anyone have a way around this?
As a workaround I was thinking of setting up one broadcast SSID for guests and one non-broadcast SSID for RADIUS assigned VLANs, however i'd prefer to have both broadcast due to numerous Vista and PDA connection issues.

Hi.
Thanks for your reply.
That is what I would like to do; have one SSID and assign the users to different VLANs based on policy.
I have all the VLANs and subinterfaces set up correctly and working independently, but the VLAN assigment does not seem to work correctly.
If I do a "show dot11 association all-client" the RADIUS attribute appears to have altered the VLAN, but the device has no connectivity and cannot DHCP.
This is with 1130AG in autonomous mode and Microsoft IAS as RADIUS.
Apparently there may be a problem with mbssid and RADIUS assigned VLANs.

Assign Multiple Sales Org for One Plant in STO process

Hi Experts,
Aware that I can assign multiple sales org to 1 plant (relationship: many to many).
I am trying to create STOs to supplying plant and assigning them to different sales organization but encountered problem.
Example:
Supplying Plant 1000 - Sales Org 1000A (food) and 1000B (apparel)
Receiving Plant 1100
Plant 1100 wants to issue 2 STOs to Plant 1000 - 1 for each Sales Org (for instance STO1 to food division, and STO2 for apparel division).
However, when I tried creating STO in the system, noticed that in the shipping tab (item details) the sales org, DC has been assigned to 1 particular assignment and data is locked.
Tried to get into SPRO to configure and define the shipping data for plants but noticed that it's 1 to 1 relationship (SPRO - IMG - MM - PO - Set up Stock Transport Order - Define Shipping Data).
How can this be done?

You can set different sales areas (~sales organisation) for one plant in SAP - based on issuing SLoc provided STO between storage locations is activated.
SPRO > Materials Management > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Define Shipping Data for Stock Transfers Between Storage Locations
Edited by: Csaba Szommer on Jul 2, 2011 6:14 PM

Trying to assign multiple category sets to an item

Trying to assign multiple category sets to an item-- i created a new category set and went to set it as the default set for Order Management. Receiving this error:
category set is defined with Multiple Category Assignment flag set to yes. Order Managment functional area can be assigned only category sets having Multiple Category Assignment flag set to No.
Is this a setting that I can change??

If the item is in transit, I'm not certain there is a way that you can do this. It will be delivered to the person at address that is on the postage label. If there is Signature Confirmation selected on the parcel, it might be held somewhere until you pick it up, though. Since you are registered to ebay in Australia, it might be best if you contact Australia Post with this question. We can only answer with our experience in dealing with Canada Post and the couriers here. And do be sure to update your addresses with both ebay and paypal to prevent this from happening in future. Best of luck to you as you carry forward. Sorry, that is assuming you are the receiver and not the seller.

Batchbatch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) assignment ( multiple batches ) takes place - at goods receipt ( order confirmation )

Hi all,
when will the batch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) for each process order ?
we will be prompted for the batch assignment ?
thanks
Vinu

Hi,
Yes system will create three process order considering you have maintain maximum lot lize as 1 Lac in Mateial master MRP 1 View.
and these three process order will have different three batches considering you have batch number assignment as the time of release of production order.
this can be multiple batches as well if partial confirmation done and batch number assignment is done on GR.
If you are looking for one batch for three process order you need to go with development.
Thanks

Assigning Multiple channels to one Camapign

Hi Gurus.
We have a requirement for our business where the marketing user would like to assign multiple channels to a campaign. Is this possible.
Ex. Marketing dept creates a campaign would like to target all existing customer. Now they want to execute this campaign through, telephone, e-mail, etc.
My question is it possible and if so how can we assign multiple channel for one campaign execution.
Unfortunately this a urgent requirement and i need to come up with a solution by very quickly.
Your help ment awould be really appreciated.
Thanks
Rao

Hi Rao
it is pretty easy,just you have to define the communication channel for all the BPs which you want to use for your segmentation cause.
within those BPs go to the identification tab and therein you just mention all those communication channels details which you want to use for assigning the BP to target group
after you are done with it just assign target group and do the segmenation.
do revert back in case of any doubt
best regards
ashish

Can you assign multiple customer masters to one Business Partner in R/3?

We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry). Does anyone know if it's possible to assign multiple customer masters to one business partner? If so, is there any documentation available?
Many thanks.

We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry). Does anyone know if it's possible to assign multiple customer masters to one business partner? If so, is there any documentation available?
Many thanks.

How to assign multiple categories to a webapp item that is populated from a frontend form?

We have a webpage with a form that allow users to populate a webapp, but we also need that the user can assign multiple categories to the webapp item that is going to insert.
The support forum told us that it is not possible to assign categories from the frontend, but only from the admin area.
Is there any workaround to this issue? We do not want the users to access to the admin area because we need them to populate the webapp only from the web form.
Thanks for any help on this.
Franco

Dont know if this will help:
http://bcgurus.com/tutorials/dynamic-categories-for-business-catalyst-introduction

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

Budget control - Assigned funds are less than payment budget for fiscal year in document item

Dear Experts,
We are using Former budgeting, when ever we run the transaction FMBV getting the following message to a particular user.
Budgeting
Assigned funds are xxxx BHD less than payment budget for fiscal year
2014 in document item XXXX /XXXXX .
And also when purchasing creates the PO getting similar message to a particular user.
Purchase order 450000XXXX
Assigned funds are XXXX BHD less than the commitment budget for
fiscal year 2014 in document item 010 XXXX /XXXXX .
How to know where these users were maintained.
Thanks for the help

Hello Itai,
Sorry for my late reply. Have you been able to find a solution for this?
If not, please update, otherwise please make this thread as answered.
Sorry for the delay...
Kind regards, Mar.

Assign multiple relationships at once

Hi everyone...I am working in Primavera P6 Project Management Release: 7.0 Service Pack 3 (Build #: 00033036)
When trying to assign multiple relationships at once, my computer will not allow me to capture multiple activities that have been assigned as either a predecessor or successor. I can highlight them, but when I click the assign button they all briefly flash as being captured then the assignment only shows the first activity in my complete schedule?
I am able to log into a co-workers machine with my credentials and perform this task, but not on my machine. Do you have any suggestions?
Thanks

Hello,
I assume this is all in the same project? It sounds like your project profile security settings could be different than your co-workers. I would see if there is a conflict between your settings from the admin perspective.
Check these two lines in project security profile.
Edit Project Activity
Relationships
Create, edit, and delete a project’s activity
relationships.
Add/Edit Project
Activities Except
Relationships
Create and edit a project’s activity information, except
activity relationships. To edit activity IDs, a user must
also be granted the Edit Activity ID project privilege.

Configured assignment blocks are not coming on to WebUi

Hi All,
Recently we have upgraded from CRM 5.0 to CRM 7.0. In PRDIOOV component i have configured the assignment blocks which needs to be displayed in the WebUi. In the displayed list of assignment blocks around 10 assignment blocks are there.But if you look into the WebUi its displaying only 7 assignment block. I have checked in the personalization there also its having 7 ABs only. I have tried with choosing other cofiguration, for this also the problem is persisting. Please provide me the solution what exactly can be done to get all the 10 ABs into the WebUi.
Regards,
Lakshman.P

Hi All,
This issue is resolved. I have done the following steps to make the Z assignment block to be available in the Web Ui....
1.I have created a Z Component and i have created a view with Z filelds in this Z component.
2.I have added this in the overview view of the component PRDIOOV.
3.I have adde this to the Overview in the view set in Runtime repository of the PRDIOOVcomponent
4.Now the vew is avialble in the configuration and i have added this to the displayed list.
5.Once this is done it should be displayed in the WEBUi but its not displaying in the WebUi. To resolve this I have made an entry in the table CRMC_PRIL_UIU by giving the
Object Type -
>S
Object ID -
>Obj Name
BSP Application -
> Zcomponent (Which i have created)
View -
>Zview (Which i have created)
6.Once i have made an entry in the above mentioned table, My Z assignment block is displayed in the Web UI. With this my problem is solved........
Regards,
Lakshman.P

Assign Controlling Area to Financial Management Area

Dear SAP Gurus!
I'm greatly distraught! I have been reading SAP HElP. I'm using ECC 6.0.
It says that to assign Controlling Area to Financial Management Area, I can go to the following menu path:
Enterprise Structure >> Assignment >> Controlling >> by choosing Assign controlling area to financial management area
However I'm not able to find the node "Assign controlling area to financial management area" in IMG.
I'm trying to activate Fund Managment within CO area and therefore would like to assign controlling area to financial management area. Currently I have created company code and controlling area and have also assigned the controlling area to the company code.
I would appreciate greatly your advise and feedback, thanks!
Regards,
Distraught!

Hi,
The FM area is not derived from a direct assignment of the organizational unit of Controlling, from the Controlling Area, to an FM area, rather from an indirect one.
The FM area is determined via the company codes assigned to the controlling area to which the FM area is assigned, whereby the company code is determined from the CO objects
You can deactivate the unrequired FM components from "Deactivate Account Assignment Elements in Controlling" which is in BCS.
Regards

What format are the .tmp files created by hp scanner deskjet f2400?

What format are the .tmp files created by hp scanner deskjet f2400? I had a customer get the dreaded "out of space" error after scanning over a hundred pages that she was going to have all in one multipage pdf. So all that work was gone (each page was a painstaking layout of multiple elements, etc.), except for the hpfAAAA.tmp files.
I'm trying to recover the data. I should say, the data is now recovered, but now I must figure out a way to use it. How can I open these HP .tmp files? What format are they saved in? There is no human-readable header to give me a clue.
If anyone can help me, it would be much appreciated. You will be saving a very nice woman many hours of work duplicating what she already did. Thanks,

Hi LC475,
There would be no way to read the .tmp file. Unfortunately she will need to free up space on her hard drive before attempting to scan the documents again.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Assigning multiple areas to SVI's created on 6500 Switch

Similar Messages

Maybe you are looking for