Assigning multiple catalogues in a Master Inspection Characteric

hi,
Pls explain whether multiple catalogues can be assigned to an MIC
Regards,
Sravan

hi
it is not possible.
but what is the reason for giving multiple lots.
it is possible for multiple catalogs other then 1 and 3 Catalog Type
-ashok

Similar Messages

Workflow management: multiple catalogues or one master catalogue?

Hi everyone:
I am new to Lightroom 3.2. I am researching the best way to set up my digital workflow. I have a two-year old Macbook with no firewire (only USB), an external monitor (Cinema Display) and I am thinking of buying two ruggeds or 1 T Seagate external hard drives. I have a few questions about setting up my workflow. I have read differing opinions about whether to have one master catalogue and run that off my external hard drive or create separate catalogues with subfolders for images for different clients and a third option would be to have a master catalogue, a master folder for images, and a series of catalogues that index the master folder of images (if that's possible?). I also want to take into account with whatever approach I use that I only have a USB connection. Some of the files I work with are up to 70 MB and I probably only have 32 G of image files at the present time. I'm sure this will increase with time but I would appreciate any suggestions or best practices that you have found to work in your own workspaces. Thanks so much for your time and counsel!

I think a lot of people would say: ONE CATALOG. It doesn't get any simpler than that. Of course, there are many others who create a catalog for each "job" that they have, so they will have to speak for themselves. I enjoy the simplicity of one catalog, I don't want to have to keep switching catalogs, and by having one catalog, I can search across all my photos (you can't do that with multiple catalogs).
You seem to be implying that there is some relationship between folders and catalogs. Folders do not have to relate to catalogs (although they can if you want them to; but you have a single catalog, its not an issue).
A clarification: your catalog file should go on your fastest disk, usually the internal disk. Your photos can go just about anywhere, including internal, USB or network drives. I'm sure there are many others who have 70MB files on a USB disk (in fact, I do), and I just don't think the speed is an issue in this instance
I strongly recommend you keep your workflow as simple as possible. When the photos come out of the camera, put them in somewhere (a folder name of your choosing), and don't move them again (exception: when you need to move them to another hard disk). It doesn't get any simpler than that. Use Lightroom structures like keywords and metadata to achieve organization; do not use folder structure or file names to achieve organization. Use Lightroom for all your photo management. Use Lightroom for browsing your images. Use Lightroom as much as possible!

Class charateristic assigned to master inspection charateristic

Hi Experts,
I am working on a scenario as described below.
1. Create a chrateristic for pressure mesurement
2. Assign it to class
3. Create two types Master inspection chrateristic
using class chrateristic & without class charateristic
4. Use both the MIC in Task list operation
5.Assign ispection point in task list , in my case Fun location
6. Create inpection order as use this task list in it
7. inspection lot is getting created
8. While doing the Result recording the operation with MIC having class charateristic as ref is not coming
Can you please look in to it.
Regards
Amar

Hi Amar,
Can you pls check :
1. You have mention proper control key in your operations?
2. You have maintained sampling procedures in task list.
3. Also check whether your MIC is in released state.
I hope you have done correctly for the above Q's, then,
4. Check whehter you have not mentioned your both MIC to the same operation. Make two operations in task list and to each operations assign MIC.
Actually there is not much difference if you take ref or not. Only the parameters in class char will transfer while creating MIC (like lower spe limit upper sp limit ) but afterwards both are same as far as tasklist is concerned.
Regards,
Rajesh

Can you assign multiple customer masters to one Business Partner in R/3?

We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry). Does anyone know if it's possible to assign multiple customer masters to one business partner? If so, is there any documentation available?
Many thanks.

We are trying to configure SAP Business Partners in ECC5.0 but it seems the relationship between a business partner and a customer master is one-to-one so a business partenr cannot have multiple customers (table BD001 only allows for a single entry). Does anyone know if it's possible to assign multiple customer masters to one business partner? If so, is there any documentation available?
Many thanks.

Assigning multiple values from a List of Values at detail (table) level

Hi,
I have a master detail entry screen. I want to assign multiple values when end user selects an item from the list. The field is at detail level (Table type). I can do it using the "Select one choice" type component (ADF Faces Core) but it doesnt retain the value when I go to the next record. This type of component works fine with the screen with only one record to show (form type). This component has binding with list type.
If I use simple list with Table binding, I can not assign values to multiple items. This type of list retains value when record is changed.
Can anyone help me resolving this issue?
Thanks,
CAH

Post on Jdev forum JDeveloper and OC4J 11g Technology Preview
--Shiv

Date format in Master inspection characteristics

Hi All
I have a requirement where my user wants to enter the date format in the master inspection characteristic. For example we want to add date of manufacture and the date of expiree as a inspection characteristics and during the results recording they want to enter this characteristics in a date format.
MY question is can we have a master inspection characteristic with a date format, if so what all the settings are required.
Please suggest.
Thanks,
Quantum.

>
quantum wrote:
>Can i use characteristics in the inspection plan instead of the master inspection characteristics. I am using Work bench transaction code CWBQM to create an inspection plan.
Direct characteristic you can't use in inspection plan. If you want to use characteristic in IP then create chara. (CT04), then assign this charac. as class chanr.(QS21) in MIC. Now you can use this MIC in inspection plan.
Hope this helps.
Thanks!!!

How can copy master inspection characteristic from plant1 to plant2

Now I have 2 plants
I already created all master inspection characteristic that i need by QS21 for plant1
Is there any way I can copy all master inspection characteristic from plant1 to plant2 ?

i'm creating inspection plan( QP01 ) for material , but all the materials & plans are in plant 2 (ss03)
now i have to assign MIC to inspection plan , i only can select MIC of plant 1 ,and plant text would show"plant 1" ....
so i want to create the same MIS for plant 2 , is there any way i can mass copy MIC from plant 1 to plant 2 ?

Batchbatch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) assignment ( multiple batches ) takes place - at goods receipt ( order confirmation )

Hi all,
when will the batch assignment ( multiple batches ) takes place - at goods receipt ( order confirmation ) for each process order ?
we will be prompted for the batch assignment ?
thanks
Vinu

Hi,
Yes system will create three process order considering you have maintain maximum lot lize as 1 Lac in Mateial master MRP 1 View.
and these three process order will have different three batches considering you have batch number assignment as the time of release of production order.
this can be multiple batches as well if partial confirmation done and batch number assignment is done on GR.
If you are looking for one batch for three process order you need to go with development.
Thanks

Multiple Addresses in Vendor Master

I wish to maintain multiple addresses in a vendor master.
Actual business case is Vendor has its head office in city A and five plants in city B,C,D,E and F. All the plants manufactures the same material. I may have to send the PO to different plant at different times depending upon the actual availability of the material in particular plant. However payment will be sent to Head Office. Can I have the option of sending the PO to plant B or plant C etc...
This can be done possibly by creating the multiple vendors B, C etc.. and assigning them into partner function of vendor A.
Is there any other option ( I do not wish to create multiple vendors) like maintaining the multiple addresses in vendor master for one vendor so that I can decide at the time of creation of PO to which address PO is to be sent?
Thanks in advance,
Sanjog

As per Standard SAP there is No Possibility to Maintain Different addresses in One Vendor Master Record.
You can go for Partner Functions.
Regards,
Ashok

Combining Master inspection charac. of HALB & FERT in a Quality Certificate

Dear Experts,
material A (halb) with Inspection Plan1 produced material B (fert) with inspection plan 2. Some of the Master Inspection Characteristics maintained in inspection plan 1 are not in inspection plan 2. I intend to create a Quality Certificate for material B (fert). How do i pick some charateristics from insp plan 1 (which is assigned to halb material A) to display in addition to charateristics from insp plan 2 (assigned to fert material B). Characeristics from fert diplays in my Quality Cert, but how do i incorporate characteristics from the halb?

You do this in the certificate profile. Click on the button on the menu bar labelled "Materials". In here you define what materials the system should look for to find the relevant batches or inspection lots.
For this functionality to work, you must have the batch where used functionality set up. I recommend having the batch where used list update in real-time rather then in batch.
FF

How to assign multiple categories to a webapp item that is populated from a frontend form?

We have a webpage with a form that allow users to populate a webapp, but we also need that the user can assign multiple categories to the webapp item that is going to insert.
The support forum told us that it is not possible to assign categories from the frontend, but only from the admin area.
Is there any workaround to this issue? We do not want the users to access to the admin area because we need them to populate the webapp only from the web form.
Thanks for any help on this.
Franco

Dont know if this will help:
http://bcgurus.com/tutorials/dynamic-categories-for-business-catalyst-introduction

Assign multiple users to a single role?

I have a process where I need to assign multiple users to a given role. In this case, I want one of the users to 'win', and take ownership of the process step. (Imagine the situation where one user is the primary processor, the other is a backup; if the primary is out of the office, i want the secondary to have the ability to pick up the request).
I've tried to assign multiple users to the same process role as follows:
rtm.addRuntimeDefinedUserToRole(prInstance, roleName, user, userContext );
but the process is only assigned to a single user - from my testing, it seems to be assigned to the first user specified using the above api call.
Is there a way to do this programatically?

Hi,
Can you please advice how you did this?
I am using Visual composer as my UI. But with looks like i am not able to pass a structure from VC so i can map it to "Assign Users to Process role" CO.
Per my understanding I need to write a program using GPI API which populates the User_List structure of the above CO. But after that i am not sure how to use this CO. Can anyone give me detailed instructions on how to use the "Assign Users to Process role" CO to assign multiple users to the role dynamicallly?
Regards,
Kumar.

How to assigne multiple value in key of read table

Hi gurus,
I want read table xxxx with key field1 = ' xxx' or field1 = 'yyy'.
how to assign multiple value as key for the same field while reading internal table.
Regards
sagar

Hi ,
You can loop the internal table like
loop at <table xxxx> where field1 = ' xxx' or field1 = 'yyy'
or you can write two read statements to read the internal table in wrk area.
read table <table xxxx> with key field1 = ' xxx'.
if sy-subrc <>0
read table <table xxxx> with key field1 = 'yyy'.
if sy-subrc = 0
endif.
else.
do your data processing.
endif.
Thans.

Can I put multiple object placeholder in Master slide?

I would like to know if I can creat multiple object placeholder in Master slide or not. After searching the disccusion, seems that this problem occur since Keynote 03 and is not improved till Keynote 09 now. In fact, I would like to make a slide show of multiple photos, but I would like to arrange several photos in one slide and exactly the same position and size in each slide. So, it would be easiler if I can make a master slide with mulitple object placeholders. Can anyone help or if there is any alternative ways? Thank you.

Apple Maps is not a GIS application. It might be one day. For now, you will have to use ArcGIS or something similar.

Assign multiple relationships at once

Hi everyone...I am working in Primavera P6 Project Management Release: 7.0 Service Pack 3 (Build #: 00033036)
When trying to assign multiple relationships at once, my computer will not allow me to capture multiple activities that have been assigned as either a predecessor or successor. I can highlight them, but when I click the assign button they all briefly flash as being captured then the assignment only shows the first activity in my complete schedule?
I am able to log into a co-workers machine with my credentials and perform this task, but not on my machine. Do you have any suggestions?
Thanks

Hello,
I assume this is all in the same project? It sounds like your project profile security settings could be different than your co-workers. I would see if there is a conflict between your settings from the admin perspective.
Check these two lines in project security profile.
Edit Project Activity
Relationships
Create, edit, and delete a project’s activity
relationships.
Add/Edit Project
Activities Except
Relationships
Create and edit a project’s activity information, except
activity relationships. To edit activity IDs, a user must
also be granted the Edit Activity ID project privilege.

Assigning multiple catalogues in a Master Inspection Characteric

Similar Messages

Maybe you are looking for