Assigning of Appropriation request to Work flow.

Hi Guys,
I am checking work flow for appropriation request, i am getting error WF is not assigned to AR, could you plz guide me where to assign AR to WF in IMG.
Regards,
Bhanu

Hi,
SPRO> Investment Management> AR>Approval>Activate Event-Linkage for Workflow Tasks
Refer:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2a/f9f294493111d182b70000e829fbfe/frameset.htm
Regards,
Amit

Similar Messages

Leave request in Work flow

Dear All
Could you please throw a light on this Leave approval through Work flow . leave request should goes to concern supervisor how we can configure in the SAP could you please tel me is it relating to functional or technical
1 if the concern supervisor is not available can we assign to another alter person to approve ?
2 if the concern person is not using mails can that leave request goes to supervisor mobile ?
3 if any person is taken leave with out informing , once he come to the office after leave can we send the leave request of past dates of what he already utilised ?
Regards
Raghavendra

hi
TO make use of Leave request worflow , there is a SAP delivered template 12300111 , which can be utilized for leave approval.
1 if the concern supervisor is not available can we assign to another alter person to approve ?
there are 2 methods to handle this, 1 is that the concerned supervisor can make a substituion rule in portal , 2 , you will have to implement deadline monitoring in your workflow.
2 if the concern person is not using mails can that leave request goes to supervisor mobile ?
the supervisor can logon to portal using mobile , if he has a smartphone device. , ya mobile approvals are possible .
3 if any person is taken leave with out informing , once he come to the office after leave can we send the leave request of past dates of what he already utilised ?
ya you can do this scenario , only payroll related things need to be checked in this case.
Regards
sameer

What needs to be done to include the leave request type in the work flow

what needs to be done to include the leave request type in the work flow?
the present request for work flow includes the notificationto be sent to the approver
which doesnt include leave request type inthe description
to include this we need to maintain a container variable but what should be the method or abap dic object which has to be used for maintaining this leave request type container

Hi,
You can create and take where you pass leave type and get description of it and create an field in WF containr and fill it than you can use add that field when you are sending notification,.
Atul

Appropriation Request (IM) to WBS

hi
I am trying to assign many appropriation request to one WBS. I have many request i.e. appropriation request for the same project. Would it possible to do it in SAP?
any help is greatly appreciated.
Thanks, Tony

Hi Tony,
You can only relate one WBS or Internal Order to one Appropriation request.
There is one more limitation, only for 1st Level WBS Element can be assign to the Appropriation request.
If you have many appropriation requests for the same project.
i can suggest you to remove the "only one root" check in the project profile and try to create as many WBS as you want at the first level and assign each WBS to one Appropriation requst manually.
So that you can see all the appropriation requests to single project.
If you try to create automatic project from the appropriation request then the above mentioned concept doesn't work.
if need you futher help revert to the forum...
Rgds
Sudhir Reddy

Down payment release Work flow

Hi Experts,
Is there any such scenario to release the down payment requests through Work flow in SAP ? If yes ,kindly provide the customization settings ? Transaction :- F-47
Rgds
ManiSuma

Hi Jose,
I have gone through the same ,but my problem hasn't solve.Kinldy explain how to proceed further.
Rgds
ManiSuma

Need doc on Message Control idoc work flow

Hi,
Can anyone give me step by step doc on Idoc related workflows. I have been assigned task on idoc related work flows i have no idea on idoc related wf.So plz suggest me a material.
Thanks,
Hari

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4af23453d11d189430000e829fbbd/frameset.htm
Thanks
Arghadip

Work flow block in credit memo request

Hi Friends,
I want to create a credit memo. I am creating the credit memo like: Sales order>Invoice>Credit memo request-->credit memo. Now my credit memo request is got created but is assigned with Workflow block at header level, now when I am going back in VA02 and saving it after removing the block at header level, but when I am again checking in VA02/VA03 work flow block is there. Now when I checked that in my workflow , it is in outbox and but I am not able to approve it becoz it is in outbox.
Where it is going for approval , it is only created by me and I don't see any approver field in credit memo request screen.
In the wrokflow outbox am getting that block CMR --as completed and get CMR approver as Error.
How can I remove the workflow block ? Any pointers.
Regards
Ashu
Edited by: ashutosh p on May 20, 2010 1:39 PM

Please check the Workflow log. By default whenever you create or act on any workflow workitem it will appear by default in your SAP Outbox.
Thnaks
Arghadip

Appropriation Request Workflow Not Working

Dear Friends,
I have been working on Workflow for Approval of Appropriation Request.
Even after carrying out all the required configuration, the process is not working. Following are the symptoms:
1) When appropriation request is submitted for Approval, I am maintaining Ser ids of approvers in the Partner field.The moment I set the For Approval status the Approve Button is deactivated.Even when I log in from the Approver's user ID the button is Deactivated. I believe that, it is so because once workflow is active one can not approve in master data transaction, approval has to be done thru workflow only.
2) When I check the Business Workplace Inboxes of Approvers there are no Workflow related mails.
3) I have also checked in IMA11 that the Work flow has been created.
Ne suggestion on the would be of great value.
Regards,
Seemant

I checked all these.
Still there is no success.
In the appropriation request I have maintained different users as partners ( excluding myself) partners. As per the Workflow the mail should go to inbox of these users. Work flow is getting activated but still its not geting updated in the inboxes of users.
Are there any Basis settings that I may be ignoring.
Also the object type BUS2104 is being used. In forum I have read that this object type is obsolete. May be I can change the object type to BUS2204 ( the new one). If I need to do the same, what are the settings I need to do?
Regards,
Seemant
Edited by: Seemant Parth on Sep 4, 2008 10:44 AM

Assignment Wbs in Appropriation request (SAP Investment Management) viaBapi

HI All,
In order to meet the need of my customer, we made a program ( with BAPI ) in order to automatically create the Appropriation request and the project definition and Wbs by uploading a file...first steps works fine until the creation of the WBS
the assignment of WBS to approriation request is not possible , receiving error message project definition does not exist but when I check the project definition via cj03 , I find my project !!! I checked also that the field INACT is empty in ia table PROJ ,
How can I assign a WBS to an appropriation request ??
Need helps please ?

Hello Prabhu,
Yes , it's was done !!!
the problem is that I turn in round , I don't know if something is missing of or the order of the objects created is correct
1) Appropriation Request ( via Bapi BAPI_APPREQUEST_CREATE )
2 )BAPI_TRANSACTION_COMMIT and wait
3)Activate Project Definition to assign WBS Element for Appr.Requ (CJDW_PROJ_ACTIVATE_IM)
4)Change now the Appr.Request to add the WBS Element. (BAPI_APPREQUEST_CHANGE)
5 BAPI_TRANSACTION_COMMIT and wait
6)Create WBS Element (BAPI_PS_INITIALIZATION after BAPI_BUS2054_CREATE_MULTI)
7)BAPI_PS_PRECOMMIT
8) BAPI_TRANSACTION_COMMIT and wait
*Error message received WBS element BE/10/IPKG/1404/D-056 does not exist*
*Message no. ABPS021*

AE Work Flow Error in creating request. Path Not Found

Hi There,
I am working on GRC 5.2
I Have lot of questions regarding this tool...
I am getting this error when i am trying to submit a request..
Please help me in configuring the AE and guide me with the basic setup.
Work flows and rest of the things..
Thanks in advance
Raghav

Buddy,
I have done config using Guide...
I am able to submit request from the GRC end ...i am getting this below status message
Request successfully got created and got approved with provisioning. Request no : .
Approval Path Status
(Status : APPROVE)
1. Auto-Provision ( Status : Approved )
[system
But nothing is changes in ECC system..as per the above request when the system complete the request User ID should be created automatically in the back end but its not happenning.
Please guide me

Where to assign User Id to agent id in PO release strategy work flow

Hi Guys
I have on requirement
Where to assign User Id to agent id in PO release strategy work flow
Thanks in advance
SAP MM

Hi,
Check & follow the path:
SPRO-- > MM ---> Purchasing -> Purchase Order- > Release Procedure for Purchase Orders -
> Define Release Procedure for Purchase Orders -
> Workflow
Here against each release code assign respective User ID's for Release Code
Regards,
Biju K

Work flow for Change Request not reliably sending emails.

I created a work flow that sends an email to a changers Manager whenever a routine Change Request is created. Sometimes the email does not go and I narrowed it down to a possible race condition between the workflow running and Service Manager adding the
Manager in as a Reviewer on the Review Activity.
When I hard code a recipient into the Reviewer list, the email works every time. When I leave the Reviewers list blank and check the box "Line Manager should review", Service Manager properly adds the changers Manager in as a Reviewer but the email
sometimes does not work.
What I am thinking is the workflow is running before Service Manager can add the Manager in as a Reviewer and therefore no email. If this is the case, is this a possible bug or how do I delay the workflow and give Service Manager enough time to populate
the Reviewer list on the Review Activity.

"Updated" is not going to work. Now the Manager gets two emails identical to each other and when the Approve the RA, they get a third. Basically every time the RA is touched, it fires an email. Can't have this.
So, back to "Created". It is still unreliable. I did not think getting an email sent would be this much trouble. Basically all I am trying to do is when a user creates a Change Request, their Manager gets an email notifying them that a Review
Activity needs attention.
If anyone has any idea on how to do this, let me know. Is there any way I can do this with a notification subscription instead of a workflow? I tried to use a subscription but I could not figure out what criteria to use to send an email to the changers Manager.

IM Appropriation request process flow

Dear colleagues,
1. What is the process difference (or implications) between creating measures and keeping appropriation request AND creating measures and replacing AR with the measure?
2. Once AR is replaced with measure what is the point of setting further system statuses for AR like Release, TECO, Closed. They seem not to have any influence on the created measure.
Thank you.

Hi,
>
PS_user wrote:
> >
> 1. What is the process difference (or implications) between creating measures and keeping appropriation request AND creating measures and replacing AR with the measure?
>
If you do not want to use AR for budget revision or supplement then better to use the option create measure and replace AR.
>
PS_user wrote:
>
> 2. Once AR is replaced with measure what is the point of setting further system statuses for AR like Release, TECO, Closed. They seem not to have any influence on the created measure.
>
>
While Releasing AR only it will be replaced by measure. After that no need to do any other status change for AR.
Tnx.
Abdul

MSMP Work flow in GRC 10.0

Hi Experts,
I have a work flow requirement and would appreciate if you guys can please help me here . The actual requirement is to design a CUP Workflow and If there are SOD issues identified, the workflow will need to go to a central team for them to address each issue. If there is no SOD issue found, the workflow should end. The requirement is to configure the access request so that the end goal of work flow is just facilitation of an SOD review. There would be no actual provisioning of users at the end of the path.
I am wondering if this would work flow can be initiated with an function module based rule or i would have to create a BRF Rule for this . As per my understanding the flow should be Start > Access Request > Sod Analysis done > If Sod , Go to Central team otherwise end > Central team will decide on the assignment of SoD Resolution > This Team will either Assign MC or wont approve the Role assignment > Both Cases the work flow ends and request is closed.
Would really appreciate if you guys can assist me as i am new to work flow and this is one of project deliverables . Thank for your valuable time and help .
Vikas

Hi Ashish ,
Thanks for your time . Let me explain you my requirement and would really appreciate if you would have some inputs here which would help me to design this .
The actual client requirement is to design a CUP Workflow and If there are SOD issues identified, the workflow will need to go to a central team for them to address each issue. If this group decides to apply mitigating controls to the issues, the workflow must then go to the compliance group for them to review for appropriateness. Requirement is do a SoD analysis for every role change/add request , so that this group takes the appropriate action based on the SoD Analysis . For all my CUP request raised , i want system to do a SoD analysis and let this group know whenever there is a SoD found or just end the workflow if there is no risk.
I am aware of the Risk analysis process for GRC 10.0 , however i want it to happen as a part of this work flow requirement.
The requirement is to configure the access request work flow so that the end goal of work flow is just facilitation of an SOD review. I hope i was able to explain my requirement . Thanks again for your help.
Your valuable guidance would be really appreciated.
Vikas

Workflow for Approval of Appropriation Request

Dear experts,
I have been working on Workflow for Approval of Appropriation Request.
Even after carrying out all the required configuration, the process is not working. Following are the symptoms:
When appropriation request is submitted for Approval, I am maintaining user ids of approvers in the Partner field.The moment I click For Approval status the Approve Button is deactivated.Even when I log in from the Approver's user ID the button is Deactivated.
When I check the Business Workplace Inboxes of Approvers there are no Workflow related mails.
please help me out
Regards,
srikanth

srikanth,
Have you maintained all the configurations related to Work flow in IMG? like activating event linkage, assigning agents, approval schema etc...
Also, have you maintained the workflow automatic configuration in transaction SWU3,
you have to maintain the following:
1. create a user id WF-BATCH, user type system and maintain a password for this user (seek BASIS team help for doing this)
2. Assign SAP_ALL & SAP_NEW in user profile tab.
3. in SWU3, under Maintain Runtime Environment --> Maintain Workflow System Administrator , select line and click on execute button, select user - WF-BATCH, save and back.
4. then in the same screen select *Configure RFC Destination * click on execute, system prompts with the user id mentioned in the above step, you enter the password mentioned in the first step, click OK.
5. now select *Maintain Runtime Environment * click on perform automatic configuration button (f9).
6. Ensure that the option Maintain Runtime Environment turns to Green tick mark.
7. select Classify Tasks as General click on perform automatic configuration button (f9).
8. Ensure that the option Maintain Runtime Environment turns to Green tick mark.
Now can go to transaction SWDD, on the left side of the screen, in the field WORKFLOW enter this value* WS00300022* press enter. Click on test (F8) button.
In the Test Work flow screen select BUS2104 line, it shows a new line at the bottom of the screen with the following options:
Object type: BUS2104, Key:
You enter the appropriation request number in the field key (you cannot directly enter value here, choose drill down option (f4) then a new window pops up, enter the approp request number, click ok.
then click on execute (f8).
Now you can check in the approver's business work place under Inbox - workflow.
Praveen

Assigning of Appropriation request to Work flow.

Similar Messages

Maybe you are looking for