Assigning Role to a Task and Resource to a Task

Hello Friends,
In cProjects, I go to the below tab Projects > Resources > Tasks.
Here I do an assignment of Role to a Task and assignment of Resource to a Task.
Could you please tell me as to where does this information gets stored.(ie which tables).
And could you pleae tell me as to how do we differentiate between the Task, Roles and Resources in the internal table created.
Because the internal table consists of Task Guid, Participant Guid and Entity Guid.
Thanks,
Salil

I can tell you the table where the the role assignments get stored . It is
DPR_ENTITY_LINK.

Similar Messages

Roles tasks and resources assignment

Hi there.
I'm working in CProjet and I need to complete role definition; I can define staf (STAFFING TAB) and assign task (TASK TAB).
In TASK TAB I can create also association between role, task and resource; now, I seem that STAFFING TAB considers TASK TAB assignment, but instead no automatic workload distribution happen.
It looks like no resources link exist between TAB...
Any suggestion about?
Thanks
Luciano

Hi,
In Staffing tab there is required capacity and available capacity.
Required capacity is given to role and that can be distributed in general tab if distribution activated to that role type.
Available capacity will be associated with the resource and that is given during staffing.
You can not distribute required capacity in staffing tab as it is taken from Role.
Hope this will help you
Regards,
Karan Hon.

Activate the TRM (Task and Resource Management)

Could you tell me where to activate the TRM (Task and Resource Management) in WM?

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

TRM (Task and resource management) extractor

Hi people!!
I would like to know, if is there some
TRM extractor for sap bw, or what could be
the procces to load TRM information in BW.
Regards!

Hi Stefanie,
First, you create the TRM site in:
SPRO>Logistics Execution>Task and Resource Management>Master Data>General Settings for TRM
You can assign your TRM site to you warehouse number here:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Assign Site
And you can also activate/deactivate the interface WM-TRM for some Source Storage Types / Destination Storage Types / Movement Type:
SPRO>Logistics Execution>Warehouse Management>Interfaces>Task and Resource Management>Control WMS-TRM Interface for Transfer Orders
Then, you continue with the rest of TRM customizing work.
Hope this will be helpful for you.

Sap wm task and resource management configuration

Hello Experts,
Can somebody give me configuration steps of "Task and Resource Mangement", Its urgent.
Thanks in anticipation.
Regards,
Hari.

Hi Hari Krishna,
I am also in need of the configuration steps of "Task and Resource Management", Will plz arrange.
Thanks in advance
Sai Krishna

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.

Restore from your iTune backup.

Task and resource management - Task confirmation from supervisor

Hello,
we are implementing TRM. We would to like give to th supervisor the possibility to confirm task using monitor. This can be useful in case of downtime of mobile devices.
Currently it's possibile to confirm from the alert monitor only the tasks with status force confirmation (status = 7). In this case from a WM pont of view the picking is already cofirmed and through monitor it's possibile to confirm the task and so the putaway from WM point view
So we need to develop a functionality that confirm task indipendently from the TRM status and WM status..
I found the function LTSK_TASK_CONFIRM but it seems that doesn't work.
Have you any suggestions for the functionality or sample code to launch the function module LTSK_TASK_CONFIRM?
i think it's very strange that SAP hasn't developed a method in order to confirm a task and then TO without using mobile device.
Regards,
Andrea

Hi Andrea,
Why don't you just use tcode LP00? You will log on to your device/resource element as if you are logging on to a scanner. This tcode then simulates the scanner screens on your SAP terminal and you can confirm all tasks as per correct scanning functionality.
Cheers,
Hein

Task and Resource Management

HI SAP GURUS
I have created a Transfer Order with 4 line items for 4 different materials. And I have created 4 tasks with reference to the same TO in TRM Monitor. System is generated same group reference number for all tasks. Now how to assign this group reference number to a warehouse resource (worker) to create a task bundle?
Thanks inadvance,
Siva
Edited by: siva.T on Aug 4, 2010 11:11 PM

Hi Siva,
Can you Resolve my Problem,
While i am going to TRM Monitor to Create Task, There i am not getting any Inbound Delivery or Transfer Order.
Can you tell me the answer...
Thanks,
Mukesh

ProjectServer REST API to create Tasks and Resources

Hi
I have managed to add a project using REST call https://<domain>.sharepoint.com/sites/pwa/_api/ProjectServer/Projects/Add
However when I try to add Task or a Resource to the created project it gives me errors. Could you please let me know what I'm doing wrong.
My REST call is this
https://<domain>.sharepoint.com/sites/pwa/_api/ProjectServer/Projects('<project ID>')/Tasks/Add
I'm getting the error "Cannot find resource for the request Add"
Thanks,
Thushara.

Thanks Brian,
This helped, I'm now successfully calling REST APIs using POSTMAN rest client.
I'm trying to use curl command to call the APIs with Windows AZURE ACS. Could you please point me how to get access Token using a POST request. Most of the examples I found on the web are using TokenHelper.GetClientContextWithAuthorizationCode
but couldn't find anything that uses CURL.
Note that I cannot use the TokenHelper
as my application is Linux.
Thanks,
Thushara.

Task and Resource Management (TRM) - Replenishment/picking process

Hello everybody,
i need your help. We are implementing TRM module and we are facing issues with replenishment/picking process. We have storage location not HU Managed and wee have the necessity to create task bundle for picking/replenishment process.
Every times TRM make a bundle, it seems that force to execute a pick&pack
Regarding picking process when TRM creates a bundle it forces to specifiy a destination HU that will be inserted in the delivery as handling unit. So in this case we have no problem.
But in the replenishment process we haven't a delivery and so the standard avoid the insertion of HU.
The questions is:
1) Is possibile to have bundle without pick and pack? .
Thank you very much for your attention.
Regards,
Andrea

Hi James,
we haven't pick HU. I think that pick HU is only possibile for storage location HU managed. Our replenishment process foresees:
1) Make a bundle of picking from different source bins until
2) Make a bundle of putatway to different destination bins
So in we are facing two main problems that are driving us crazy:
1) The bundle in TRM works only in the pick and pack scenario. So in our warehouse replenishment (LP22) it doesn't work. A solution could be to make a cluster of task but it's not possibile to managed it in a system guided way. Maybe we have solved this problem by forcing HU numbers in the standard fields even if don't exist at IM or WM level. It's a dirty solution, i know.
2) Other problem is to manage a pick and drop. Operator could executed the picking bundle and then leave the mixed pallet in a drop-off point. Next an other operator has to scan the serial number of mixed pallet and put each material to a different bin.
Stantdard system can create only one task with the mixed pallet composed to the final destination while we have the necessity ti have n task.
I don't know if it's clear and someone could helps us in order to implement the scenario described above.
Other problems is that it seems impossible to develop custom functionalities in TRM because frequently the next step in the Logical transaction is harcoded in the standard code
Bye Bye,
Andrea

Task and resource management wihout HU

Hello everybody,
i'm trying to customize the TRN module but i have a doubt...
Is it possibile to use TRM without using HU? . I work in a storage location not HU managed.
Thank you very much for your replies.
Regards,
A.

Hi Andrea,
Yes .. it is possible ..
I am just learning TRM and I have just created a prototype without HU .. only with SU.
Regards,
Benito

Task and resource management without HU and SU

Hi experts,
I know that it is possible to use TRM with SU and without HU.
Is it possibile to use TRM without HU and SU?
Thanks in advance
Regards
M.

Hi,
Welcome you post on the SAP Business One Integration Technology forum. However, this may not be the proper forum for you. This forum is dedicated to SAP Business One. Please close your thread and post on a proper forum.
Thanks,
Gordon

[Outlook] tasks and... sub tasks.

Inside Outlook, I would like to have sub-tasks features.
Often I need to nest some sub-tasks into a main task.
There's some workaround ...or extra plug in to do it?
bye
Daniele.b75

Hi,
Outlook does not have the capability for subtasks without add-ins. Numbering is the usual recommendation.
For example:
Task
1.1
Subtask A
1.2
Subtask B
Furthermore, the add-ins called Taskline might get the function of organizing tasks in hierarchy. You may refer to the link:
http://www.taskline.com/
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

Assign biz role through CRM -SU01 and display page at portal

HI, SDN Fellows.
I am creating some custom portal roles at portal and mapped it to the custom business roles for some PCUI screens at crmc_blueprint_c --> "Assign Portal Role to Single Role" ("Assignment of CRM Role to Portal Role").
Currently, our portal UME data source is mapped to CRM system.
Right now, I have to assign both the CRM Role through SU01(to have access the CRM Object Method at CRM-PCUI application) and Portal Role through User Admin of WAS/portal (to access/display the PCUI iView in the portal).
My goal is to just assign role through CRM-SU01 and achieve the same output as I described above. Meaning can I just do the role assignment for the CRM role (through SU01) and able to access to the CRM-PCUI application through portal (able to see the pcui screen)?
Thanks,
Kent

What I want is when I assign a role (Sales Manager) said user A in CRM system, userA should able to see the related workset/page/iviews in the portal (without the need to assign the same: Sales Manager role in portal).
Now, what I have to do is assign the related objects into a single/composite roles in CRM (for backend data access), then I have to assign a portal role (through User Admin of Portal, so that they can see the portal content),
is that a way we can do it in one step?
Thanks,
Kent

Problem in Task and Ressource Management

Hi Guruu2019s
I am working on Task and Resource Management, configured the system as per the requirements for TRM, then created inbound deliveries and Transfer order for that deliveries the TO is not confirmed. But when I am executing the TRM Monitor and dragging thes site to inbound delivery number onto the transfer order, the TO do not exit in the TRM Monitor.
Why itu2019s not coming any suggestion please.
Thanks in Advance
Regards,
Sai

Hi Sai,
Please check the tabl entries in SE16 or similar
1. Assigned the site to the WH number (T340DT-LOCAT)
2. Activated TRM for the movement type/Storage types (T347A-KZINA)
2. Turned two step confirmation on for source and destination storage types (T331_B-QUEIN & T331_B-QUAUS)
Can you see anything in LTRM TRM monitor (no selections = only enter site number) i.e. a delivery number or TO?
If not please try:
1 Transaction LTRCC
2. Deleting the data delivery/TO and recreated it?
If this does not help, I could take a look at you setup if you allow external access?
Thanks James

Assigning Role to a Task and Resource to a Task

Similar Messages

Maybe you are looking for