Assigning search help to fields created by T-code OXK3

Hi All,
I have created two new fields using t-code OXK3. These two fields have come in the table control of t-code fb60 at the line item level in place of fields
1.acgl_item_gen-gen_char1
2.acgl_item_gen-gen_char2.
These two above fields were place holders which were replaced by the two newly created fields.
Now my requirment is that i need to provide F4 help for these two fields.
Best Regards,
Kalyan

Hi,
1. You can add new fields in the complex search help of the field
by editing the search help exit. please check search help have any search help exit attached to it.
Frank Zhang wrote:
> And also if I input value "1000" in the company code field, the search help value of field bank code will automatically relate to "1000".
I not sure how a F-02 screen value of company code in the entry screen can be relate with bank code in the search help
a®

Similar Messages

Assign search help for a screen field in standard program?

Hi All,
Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31)
I know we can do this by assigning search help through screen painter (by changing standard program, which is my last option).
Any advice/help will be greatly appreciated.

Hi,
I think you will find solution in below <b>threads</b>:
Re: Search Help for standard field
How to assign a search help
Search help for Standard SAP field
<b>Reward if helpful</b>
Rgds,

Assign search help to tcode F-47 (field purchasing doc)

Hi All,
I've created an Elementary search helps via SE11.
Now I want to link the search help I've created with transaction down payment request screen F-47 , in the field purchasing document.
Expected result, when I drill down in the purchasing doc field, I can see my search help and use it to filter.
Please guide me what should I do ?
Thanks,
-M-

Solved by append search help in SE11.
Search help = MEKK
go to - append search help

How to assign search help for an input field by fetchign values from an int

i have an input field ,
i want to assign search help for the same by fetching values from a table.
how to achieve this ?

Using the below ways you can assign search help to a field.
1) [OVS Search Help|http://wiki.sdn.sap.com/wiki/display/Snippets/OVSsearchhelp]
2) [Freely Programmed Search Help|http://wiki.sdn.sap.com/wiki/display/WDABAP/Freelyprogrammedinput+help]
3) Dictonary Help - Use the Data element for that purpose.

Assigning search help (F4 functionality ) for recipient field in IW32

Hi,
my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

hi,
refer to the following link:
http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
i hope it helps
regards

Create search helps for fields of custom tables

Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.

Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe

Assign Search Help to Table

Hi All,
I have created a custom check table which also has a text tables assigned to it. I have created a Elementary Search help for the check table and the selection method for the search help is the check table itself.
The issue is when I goto the check table using SE11, I click on Extras --> Search Help for Table, it does not display the search help that I had created however the search help is displayed for a similar customizing table created by SAP, TVK8.
I think I need to assign the search help to the custom table that I have created. I would greatly appreciate if anyone can tell me as to how I can assign the search help to the check table.
Thanks,
Vamseedhar K

Check this link..Attaching to Check Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/63/1b70bfc32111d1950600a0c929b3c3/frameset.htm
Also check this link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70260b78-ff89-2a10-5eb0-d2f51467560b
Also check the steps to create search help.
This is how u can create "Search Help" for the fields of the ztables that u have created.
SE11- Create Search Help for 1 field, "Selection Method" box put the Table name to which the field belongs to. "Dialog Type" box write: "Display Value Immediately".
Search Help Parameter is the Field name for which u want the Help. Tick Imp & Exp options and assign LPOS = 1 and Enter. , save and Activate.
SE11- Go to the table , Click on the Field that needs to be assigned a search Help....Click at the left side of the Field so that all the corresponding data Elements, Key field etc also gets selected.
Click on the "Search Help tab" just above the "Data Type " column.
Put the "Search Help" name that u just created. Mention the Field and Enter. it takes up the required values. Now Copy.
U can repeat the process for whatever fields u want to assign a Search Help.
se51- Go to Screen Painter, Select Fields from Dictionary table to which u want search help to be assigned.
Double click on the Text box of the corresponding field,......> Screen Painter Attributes.......> Search help Text box.........> Enter the name of the Search help that u created for a field.
Ok....>Save.........> Activate
Now u should be able to get the Search help for the fields that u wanted to.

Search help for field in SM30

Hi Experts,
This is a Z table with first field as GROUP and second field as KEY.
User can select values for first field using a search help. It has three possibel entries
1. Purchasing Org
2. Region
3. Coutnry
In second field the user has to enetr value based on selection in first field, for eg. if 1 is chosen in 1st field user will enter name of a purchasing organisation.
Can we dispay a search help for second field based on the selection in first field?
Like if 1 is selected in 1st field second field should display search help for Purchasing Org
if 2 is selected in 1st field second field should display search help for Region....in SM30?
How can we achieve this?
Thank you,
Anubhav

Hi Anubhav,
1.Go to the table maintenance generator screen from SE11 (Utilities -> Table Maintenance Generator).
2. In the Table maintenance generator screen , navigate to Environment -> Modifications -> Maintenance Screens
3. Select and Edit the screen where you need this new search help
4. Create a Process on Value Request module for your second field at the end of the screen flow logic after MODULE LISTE_AFTER_LOOP.
5. In the POV module, use funcntion DYNP_VALUES_READ to read the value of field 1 on the screen
6. Fill your own table with the values for field 2 based on field 1 and display selection using the function F4IF_INT_TABLE_VALUE_REQUEST
Hope this helps.
- Puneet

How to attach search help in field BEDNR in table EKPO

Hello, Experts!!!
I have a problem in attaching Search Help in field BEDNR in table EKPO.
Can anyone share something about this.. I've been dwelling on this for some time now,
but still wasn't able to find a solution.
Any thoughts would be highly appreciated.
Thank you!!!
Ellainne22

Hi,
I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
or go for modification & change the dataelement.
Regards,
Gokul

Assign Search help in report program

Dear All,
I facing problem to assign search help in report program.
I crated one elementary search help in which three fields i include
-carrid
-carrier name
-booking
all three fields having import and export parameter in search help.
while executing this search help in se11 it gives proper output.
but while assigning this search help in report program it only fetch one carried.
my report is also having three parameter
-carrid
-carrier name
-booking
i assign search help like
PARAMETER : p_carrid TYPE scarr-carrid
                           MATCHCODE OBJECT z01_carrid,
with all three field but it fetch only carrid ...

Hi Chintan,
For such types of requirements you can use this Function Module:
F4IF_INT_TABLE_VALUE_REQUEST.
Use this functiom modue under AT SELECTION-SCREEN ON HELP-REQUEST FOR P_CARRID.
With this function module, you can fill your remainng parameters : P_carriername and booking also.
Sample Code:
     DATA : TMP_RETURN_TAB LIKE TABLE OF DDSHRETVAL,                                TMP_RETURN      LIKE DDSHRETVAL,
                TMP_FIELD       TYPE DFIES-FIELDNAME.
CASE AKIND.
   WHEN '1'.
     TMP_FIELD = 'AENNR'.
   WHEN '2'.
     TMP_FIELD = 'VBELN'.
   WHEN '3'.
     TMP_FIELD = 'ZZTEHAI'.
ENDCASE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
   EXPORTING
     RETFIELD               = TMP_FIELD
     WINDOW_TITLE           = ATITEL
     VALUE_ORG              = 'S'
   TABLES
     VALUE_TAB              = ATABLES
     RETURN_TAB             = TMP_RETURN_TAB
   EXCEPTIONS
     PARAMETER_ERROR        = 1
     NO_VALUES_FOUND        = 2
     OTHERS                 = 3.
IF SY-SUBRC = 0.
    READ TABLE TMP_RETURN_TAB INDEX 1 INTO TMP_RETUN.
    AVALUE = TMP_RETURN-FIELDVAL.
ENDIF.
Jus analyze this code, you can get ur requirement done.
Regards
Sandeep Reddy

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

Search helps of fields.

where we can find search helps of fields.any data base table is there???

Hi,
in the table DD30L u can find all the search helps in that table field is SHLPNAME
plzz reward if it is useful..
plzz dont forget to reward......

Dynamically assign Search Help to the field

Hi All,
I have creates one search help from se11 like zshlp. i m not assign this search help to the database field. bocz i used this search help at runtime. so how can i assign this search help during execution time of my program.
Reward for helpful answer.
THANKS & REGARDS,
SAHIR

Hi Sahir,
Creating dynamic search help means the f4 help will come on the context bases.
that will achieved with function module
1. F4IF_INT_TABLE_VALUE_REQUEST : Display internal table as search help (documented in SAP)
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
REPORT ZTEST_F4HELP .
parameters: p_vbeln type vbak-vbeln,
p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
translate_to_upper = 'X'
tables
dynpfields = dynfields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
others = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
importing
output = p_vbeln.
select posnr matnr arktx into table help_item
from vbap
where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'POSNR'
dynprofield = 'P_POSNR'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = help_item.
Hope this is helpful to you. If you need further information, revert back.
Reward all the helpful answers.
Regards
Nagaraj T

How to assign search help for custom cost centre field in SRM 7.0

Hi Experts!!
We are currently working in SRM 7.0.As per our business requirement, in account assignment tab we need to use a custom
cost centre field (ZCOST_CENTRE) instead of standard cost centre field.It is observed that for standard cost centre field there is a standard web-dynpro search-help assigned where it will return the F4 search help values from backend.
Can any one of you please help me how can I assign the search-help for the custom cost centre field. Is there any FM to call the backend cost centre search help for custom field or any other way how can I achieve this?
Thanks in advance.
Regards,
Kalyani

kalyani,
i can see your requirement in below way..
as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH
USAGE_SH_F4 /SAPSRM/WDC_UI_BACKEND_SH INTERFACECONTROLLER
so you can replicate the same functionality for your z field.
but can you clarify one thing.. why are you going for this z field in place of standard field ?

Assign search help to a field in PCUI

Hi Friends,
Here is my requirement. I have designed a PCUI application which searches the address based on the post code entered. Now the standard method to assign this application as search help is to specify the name of the application in the "input help" property of a field in the field group.
I have implemented the same for the field POST_CODE1 of the field group ADR_DETAIL_POSTAL which is a part of service order application in PCUI. Now when i try to use the same thing in street field, it does not work. the F4 help just does not come. It works fine for STR_SUPPL2 field, House_num1 field and all other fields in the field group except for the Street field. ANd the client wants in only on the street field.
I am not able to understand that what might be the possible mistake. Any help in this matter will be highly appreciated.
Thanks in advance,
Karan

Check the FM: HELP_VALUES_GET_WITH_TABLE_EXT
Check the documentation for example code.
regards,
Ravi

Assigning search help to fields created by T-code OXK3

Similar Messages

Maybe you are looking for