Assigning Search Queries to User Groups

IN CRM PCUI, the user has the option to save any search query as his private query. Through Trans. CRMC_BL_COPY_QUERIES, this query can be made public (available to all users).
Our requirement is to be able to make the private search query of the user available to only a set of users and not to all users. Can the user groups created through Trans SQ03 be used in some way to meet this requirement?
Is there any relation/ linking between the queries created in PCUI and those in GUI (thru Trans SQ01)? Can the queries created through PCUI be modified thru SQ01? Or alternatively, can the queries created thru SQ01 be seen and used in PCUI?
Any help on this would be greatly appreciated.
Thanks in advance,
Vishal

Hi Vishal,
As far as i know there is no such functionality available so far.
A possible workaround may be to copy these queries to the relevant users , but then it is as good as the users creating and saving these queries for themselves.
Regards,
abhishek.

Similar Messages

Assign SQ03 Abap Query User Group to role

Please advise how to assign SQ03 Abap Query User Group to a role. Thanks.
Moderator message: please do more research before asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 12, 2011 5:40 PM

Hello Sunil,
The problem is that I have hundreds of users to maintain user groups.
found out that it is possible to assign user group to role and role to user groups. implementing hr authorization with in-direct assignment of auth. So if I could use sq10, user groups could also be link to position in the org chart.
sq10 does allow you to assign a user group to a role but when you assign the role to a user and the user runs a query, it reports that no user group has been assigned.
Suspect that there must be a parameter or switch that is not turned on
Regards

User Groups for Queries

All,
I have a user that gets a message stating that they are not assigned to any user group when using t-code SQ00.
I have checked and the profile they are assigned to has rights to run SQ00 and I have also checked SQ03 and I do have her assigned to query groups.
Am I missing something? I've been administering users for years and have never had one with a problem like this. All the usual areas are fine.
Thanks for you help!

i have to apologize - i didn't read your post carefully - my mistake.
does this also happen when parameter AQB in SU3 is set to a default user-group?
have you checked whether infosets are assigned to that particular user-group?
Edited by: Mylene Euridice Dorias on Feb 13, 2008 5:18 PM
i'm editing this: i have just been testing. is the infoset assigned to that usergroup properly generated?

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

Error : Query does not exist in user group

Hello,
I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
Also i created the new Infoset and Query in an existing User group.
I also assigned the Infoset to user group and query to Infoset.
But while running the new transaction it is giving me error that 'Query does not exist in user group'.
Kindly help me with this.
Thanks in advanced.
Regards,
Darshana

Hi,
After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
Note: The query can only be generated when the InfoSet is assigned to a user group.
Also check whether the usergroup is given or not for queries.
SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

Transport User Groups in Portal

Hi
In Development Portal i assigned Portal roles to user groups
How can i transport the assignment.....i mean user groups
Thanks

Go to User Administration - Identity Management in your portal.
In the search criteria, select Group and then select the data source where you created your custom groups.
If you use a * and search, you can find all the groups.
You can then select one or multiple groups and click on the "Export" button.
In the following screen, you can see that the group information and the user to group assignment will be populated as a text file inside a text window.
Select all the text (Right click and Select All) in that export window and paste it into a notepad and save it.
Now, in your target portal system, go to User Administration - Import
Browse and select the notepad which you have saved above and click on the Upload button.
You can do a similar export function on Users, Roles along with Groups.
Thanks,
Shanti

OIM 9.1.0.2 - User group permission conflict issue

Hi Gurus,
IHAC who have faced a strange behavior about permission conflict.
User has been assigned to a user group (ANALISTA DRSI) who have permission to disable resource of the users he administrates. The user group has been assigned to resource's administrator.
The same use has been assigned to other user group (ANALISTA ADM DRSI) who have other permission. The user group has been not assigned to resource's administrator.
If the user has been only assigned to ANALISTA DRSI user group the user is able to see records on Rogue Account report. If the customer has been assigned to both ANALISTA DRSI and ANALISTA ADM the user is not able to see the record on Rogue Account report. He got a display error message (You do not have permission). Both user groups have the Report menu item assigned.
My question: if the customer is assigned to a user group who have permission to see the reports, should not the user is able to see the report even though he is also into the other group who do not have permission?
Is there conflit in the OIM???
Any tip will be very appreciated.

Orgnaization > Manage > Select Org in which users are getting created > Administrative Group (Drop Down) > Select Group for which users are not coming.

What is the Advantage of creation of user group through SUGR?

Hello Masters,
As per audit requirement I have maintained user groups for different sets of users through SUGR, but I am not getting except differenciating users (based on group), is there any other advantage? Can we assign role to a user group instead of assigning to list of users or can we do any mass changes to an user group by giving only user group name.
Regards,
Nilutpal.

Dear Neels,
Apart from maintaining user group for Differnciation purpose you can also take the advantage on the following sectors:
1. Follow the http://help.sap.com/saphelp_nw04/helpdata/en/ce/17533e5ff4d064e10000000a114084/content.htm link . From this you will come to know the use of user group in the authorisation area.
2. User Groups also allow segregation of user maintenance, this is especially useful in a large organisation as you can control who your user admin team can maintain - an example would be giving a team leader the authority to change passwords for users in their team.
3. The authorization user group is used in conjunction with S_USER_GROUP authorization object. It allows to create security management authorization by user group. e.g. you can have a local security administrator only able to manage users in his groups, Help-Desk to reset password for all users except users in group SUPER, etc...
In case any issue, please feel free to reply.
Regards,
Nilutpal.

User groups in phonebook

Hi!
This is a question about the Series60 FP1 contacts application (Especially the 6110 Navigator).
I was wondering if there are any limit to the user groups that can be assigned? How many user groups can be created?
Hoping for reply, thank’s a lot!
/Linnea

Anyone got a clue?

Report User (groups) assigned to Bundles

Hi,
i need a report of users or user groups assigned to Bundles. I can create a report of Workstations assigned to Bundles. But the users are LDAP users, so they're not available in the user database of ZCM? Is there an option to report Bundles and there assigned LDAP Users or User Groups?
Regards,
Patrick

petjez,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Restricting Queries in HR: Compensation Management User Group

I am trying to restrict the Infoset /SAPQUERY/HR_XX_CM_03, which contains salary/compensation queries, assigned to User Group /SAPQUERY/H0, from being accessed by anyone. In SQ03, user group /SAPQUERY/H0, there are no users assigned but users with access to SQ01 can select the user group /SAPQUERY/H0 and access the queries tied to infoset /SAPQUERY/HR_XX_CM_03. Why are users able to access the infosets of the user group when no users are assigned to the user group?

Turns out that security authorization for access to SQ01 had an S_QUERY value of 02 which allows for full change. With this value the user group/user assignments done via sq03 did not work. Setting S_QUERY to 23 allows for user group assignment to restrict access in sq01

Assigned Role in user Group

Dear All
Please help me assigned Role in user Group . I create user Group ( SURG ) . But i can't assigned Role ?
Regards , Thanks
Lannguyen

Hello,
You cannot assign user groups directly to Roles, however you can do the following.
Use PFCG transaction
1. Select the role and switch to change mode.
2. Switch to user tab.
3. Put the cursor in the blank line and hit F4
4. You should get a popup window which asks you to provide search criteria for the user.
5. Switch to 2nd tab Users by Logon criteria, here you should be able to find the selection field User group.
6. Select the group you created and hit the green tick.
7. All the users in that group will be listed in the User list tab on the main screen.
8. Now to complete the user assignment hit the User comparisor button ( it should turn green once done).
Regards,
Siddhesh

Unable to assign the user in user group through SQ03

Hi All,
When I tried to assign a user to one user group from SQ03 the tick mark is disables can't assign the user.
This is happening only to one of the employee only. Others i can mark tick.
Please advice.
Imran

Hi
Please check if the user has authorization to that query....
For example if the user is a PA administrator & you are trying to assign this user to a user group which is Time Management ( Time Infosets), then the tick will be disabled.
This case was encountered in our firm too.
Please check & revert.
Regards,
Megha

Is there a way in 10.8 Profile Manager to assign certain users the sole right of adding/removing users to user groups?

Hello,
I want to assign certain network users the ability to login via browser to the profile manager for 10.8.x server and add/remove other users from user groups. Think teachers managing their class rosters, if the class was a group and the users their students. I do not want any other admin funtionality beyond that for them.
Suggestions?

Well thank you for being so polite. Yes, on looking on my 10.8 server, I have the same thing. How annoying. I have no idea how to answer your question. If the management abilities are no longer in Workgroup Manager then there's a change that the server doesn't pay any attention to the settings, so manually changing settings in LDAP won't have any effect either.
At least I can verify that it's not just you who gets that result. I wonder what happened and how we're meant to do this now.

Query for tasks assigned individually to all members of a user group

I am looking for a query that will allow me to create a list view that will show all tasks assigned to the current user (in the Assigned To field), as well as to other members of the user group that the current user belongs to. The scenario is that we want
a student to see tasks assigned to them, as well as to other students in the class. Each class is its own user group. I have seen a lot of examples where the filter shows tasks assigned to the current user and the current users group - that is NOT what I am
looking for.
For example - Todd (me), Fred and John are members of one user group. When I look at this class view, I should see tasks assigned to me, as well as those assigned directly to Fred and John.
Does anyone have a CAML query for this? I am thinking it would need to include the SPGroup element. Thanks!

Hi William,
I've tried this, but it isn't working for me. Should I chnge the Smart Group, to an ordinary one?
Thanks

Assigning Search Queries to User Groups

Similar Messages

Maybe you are looking for