Assigning source system to info source while loading hierarchies

Can anyone tell me how to assign flat file source system to Infosource while loading hierarchies and plz send the step by step instructions for loading the hierarchies.
Thx in Advance.

Hierarchy Upload from Flat files
Hierarchy Upload from Flat files
Uploading Hierarchies from Flat Files
http://help.sap.com/saphelp_bw30b/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
Thanks...
Shambhu

Similar Messages

Assigning property (* or / or ? or +) while loading data/building dimensions

Hican anyone tell me how to assign property (* or / or – or+) while loading data/building dimensions thanks and regards,Balu

The section in the DBAG about loading properties is really quite good. Basically these have to be in your load file in order to load.

Error while loading hierarchies

Dear all
I am faicng the following errors while loading hierarchies from R/3
1.Error"Error in the hierarchial structure"
When i open the logs i can see the follwing analysis,but not able to understand
Analysis
The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
Possible solution
Remove the Duplicate Nodes
Can anyone explain this please
2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Can anyone kindly help me out in these
Regards
Veena.

1.Error"Error in the hierarchial structure"
the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

Error in ALPHA conversion while loading hierarchies

Hi,
I got the following error while loading hierarchies:
Error in ALPHA conversion in NodeId00000088 for InfoObject 0PROFIT_CTR
Message no. RH224
Diagnosis
The technical node name for node id 00000088 is not consistent for conversion exit ALPHA, which is stored with InfoObject 0PROFIT_CTR.
Possible reasons for the error:
The original consistent value returned by the DataSource was changed by a conversion routine to a non-consistent conversion exit value.
The DataSource returns a value that is not consistent in the conversion exit.
System response
Loading the hierarchy was terminated.
Procedure
Check whether the correct conversion exit was entered for the InfoObject. If necessary, change the conversion exit, conversion routine or the data to be extracted.
A further option is to activate automatic conversion in the transfer rules. Here, the system executes the conversion exit, making sure that the data is in the correct format.
If it is not hierarchies, we fix this error by prefixing the zeros (as we are working on Qbox we wont change the transfer rules to select the conversion routine) but here there is no PSA, the data is coming from ALE. Based on this please suggest me to how to fix this error?
Points will be given for any helpful suggestion

Ganesh,
Can you please check out the Alpha Conversion Routine and also nodeid for that infoobject..
There might be some inconsistencies in the code..
Hope it helps
Gattu

Error while loading hierarchies in sap bw

Hi All,
Iam getting the below error while loading hierarchy from flat file. While scheduling infopackage iam getting ....
Error 8 when compiling the upload program: row 657, message: A newer version of data type /BIC/B0014446000 was...
Can any one please resolve the issue....
Regards,
Kalyani

It wasn't any issue with Hierarchy load actually. He might have done some changes to the InfoSource and activated it. But some time you need to refresh the complete tree or run \nrsa1 to refresh the widow otherwise it gives error.
It shows to the system both the copies of the infosource new and the modified and so throws this error.
This is also the case in case of time stamp error, where you do some changes to DS again and the time stamp in system metadata
for this DS (re-activated) dosen't matches witht the one expected as it's creation time stamp preiously. So in this case also you need to re-activate and refresh/re-login into the system again.

Application document not posted: while loading hierarchies

Hi,
I am trying to load hierarchies for 0costcenter and 0material. I am getting the error '51 Application document not posted'. The load is successful for master data as wellas text data loads. The connections are fine and parter profiles too. Please let me know the step by step by procedure to solve this error.
Also let me know what can be possible reasons due to which this problem occurs.
Thnx in advance.....
and yes i do remember "thanx = Points" :):)

Check this if it helps:
Error in Data loading
Re: Problem with Info Idoc -- please suggest

DAC message while running execution plan - "Error while loading nodes"

I have just installed and setup Informatica 8.6.1, DAC, BI apps 7.9.6 for a Oracle Ebs R12.1.1 source instance
In informatica I have defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names as in physical data sources of DAC
I have mentioned the flatfile parameter as "ORA_R1211_Flatfile" in DAC
after successfully build, when I run the ETL the error "Error while loading nodes" occurs.
the log file shows the following details:
START OF ETL
20 SEVERE Sat Apr 23 21:57:58 GST 2011
ANOMALY INFO::: Error while loading nodes.
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
com.siebel.etl.engine.core.ETL.run(ETL.java:658)
com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
21 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL DataWarehouse
22 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL ORA_R1211
23 SEVERE Sat Apr 23 21:57:58 GST 2011
END OF ETL
*****************

Hi,
Mark the current EP as completed and re-assemble the subject area, generate parameters and build the EP and run the load.
Thanks,
Navin KumarBolla

Niping: error while loading shared libraries: libsapu16.so

Hi SAP gurus,
when trying to implement note # 500235, I got this error message on a Linux system:
./niping: error while loading shared libraries: libsapu16.so: cannot open shared object file: No such file or directory
I know I have to add the library's path to LD_LIBRARY_PATH environment variable, but where is the path?
I'm using SuSE Linux 9
Thanks,
Antonio

ok... that solved the library problem.. thank you..
now I'm having a connection refused error message:
***LOG Q0I=> NiPConnect2: SiPeekPendConn (111: Connection refused) [nixxi.cpp 8724]
ERROR => NiTClientLoop: NiConnect (rc=-10) [nixxtst.cpp 2632]
ERROR       partner not reached (host 10.1.206.20, service 3298)
TIME        Mon Mar 12 12:18:22 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi.cpp
LINE        8724
DETAIL      NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO       111
ERRNO TEXT Connection refused
COUNTER     1

While loading data from r/3 to bw error 8 /error in source system is coming

while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .

Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check'

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Assign Source System to Source System ID

Hello Experts,
I am loading master data from flat file (which is an export from another BI system Info Object) in which one of the attribute is SourceSytem ID (0SOURSYSTEM). But in the flat file some of the records for this particular attribute are blank and some are with R3. So the records which are without any sourcesystem ID are not getting loaded.
Error is as follows: No source system ID exists for source system (logical system) FLAT_FILE.
Detail Error: Procdure: Assign source system ID to logical source system FLAT FILE. To do this go to TOOLS--> Assign source system to source system ID from main menu of DWB.
Can anyone tell me what exactly I need to give at this place. Any two digit char or do I need to contact basis to follow any specification?
Thanks for your time.
Experts please let me know how I can proceed loading flatfile data which i got from another BI system.
Edited by: saptrain on Apr 5, 2010 7:52 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 11:07 PM

Hi,
What exactly does this attribute does while reporting?
Usually if you have 2 source system then this attribute is used to differentiate between to source systems. You have to use this is report to restrict to particular source system
I am assuming it will just differentiates the data that we loaded either from R/3 or FF or something else. Is that right?
Yes, You are right
Apart from that is there anything useful in reporting point of view?
Everything is based on reporting. Mostly you will use this when you are having two source systems. Ex: ECC and CRM for 0BPARTNER info object
It doesnt matter if I give any two chars(as u said) right?
No it doenst matter. You have button called something "Suggest ..." you can use that. Other wise you can give your own name
thanks
Srikanth

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Creation Info Record at Material group,Source List & Assign source to PR

Hi All,
Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
Completed at my end:
1. Creation of Info Record at Material Group level
2. Maintained Source List at Material level.
Issues/ Errors:
1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
2. Material differs from the Material from the Info Record.
Help / Information required :
1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
Can anyone please provide the soilution to the above points?
Thanks in advance for the solution.
Regards,
Pavan.

Hi Please create Contract and refer same while source list. This will help
Regs,
AD

Question to assigning Source System for Activation

We want to assign source system for activation, before business content-InfoObject catalog activation. The steps as follows:
1.On the Data Warehousing Workbench: Business Content view from the menu choose Edit  Source System Assignment.->This step is ok, no question.
2. In the Choose source system by default? dialog box select the checkbox in the column Default assignment in the row containing the source systems you need to load data from.->Now we can see BI system as default call DEGCLNT500 displayed, in my case we only connect one R/3 system call DHHCLNT100 to BI system.
So, the question to that is shoud we select both R/3 source system and BW source system as default or just select R/3 source system as default and dis-select BW source system?
Which one should we choose, both or only R/3 source system?
Pls help, thanks!

Hi hi ni,
If what you are activating it's going to retrieve data only from R/3, then select R/3 and uncheck BW.
You can change this whenever you want, if in the future you need bw, before activating, you can change it.
This doesn't means where is going to get the data from, this is just to look for active (and replicated) datasources to connect to the business content you are activating.
Hope this helps.
Regards,
Diego

Assigning source system to info source while loading hierarchies

Similar Messages

Maybe you are looking for