Assigning Standard Task to Role

Hello,
I am trying to assign Standard Task to Role from PFTC tcode->Agent Assignment->Create, then I am getting pop up there when I select "Role" then I am not getting any values.
What will be reason that Role is not displayed in the F4 help?
Regards,
Ansar Shaik,

Solved like this.
1. Created a Role
2. On double clicking the Role you will be get new screen. There go to "Workflow" tab.
3. click on "Workflow Tasks" button.
4. Select Task from "Add Task" button.
5. Save.
Regards,
Ansar. Shaik.

Similar Messages

  • I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

    I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

    Hi Atiq
    Now that's concerning.....!!!
    This error usually shows up when the workflow is not able to resolve the outcome of the decision....no branch is there for the selected decision.
    Since, the standard workflow is also going in an error....this is something wrong...
    Did anyone play around with the standard decision task?
    I am not sure if this will help, try generating the task and standard workflow by executing the FM SWD_WFD_REPLICATE_FROM_9999 from SE37 directly. First, generate the task (give full task ID TS00008267 as the input and execute; and then the standard verification workflow in the next exec).
    Try and test again...if this works, generate your custom workflow again like this.
    The above is a pure guess and I am not sure if this will work.
    Regards,
    Modak

  • Disable role assignment at task level

    Hi Experts,
    We have a requirement where role should be assigned at task level only and not at sub task level.Any configuration for this ? if not, How to achieve this by development?
    shashank

    solved by development

  • No standard assignment defined for BP role category CRMACC

    Hi experts,
    Could you guys help me out.
    i am trying to assign a role CRMACC to my BP using the FM - BAPI_BUPA_ROLE_ADD
    but after the exceution of the FM, i get an error message: No standard assignment defined for BP role category CRMACC
    Could you guys help me out here?
    Cheers,
    Lawrence

    Hi Lawrence,
    I had a similar query in which I had to assign role CRM000 to BP but could not do so and got that error.
    The solution can be found in my thread:
    Issue assigning BP role
    Just interchange CRM000 as CRMACC for your case.
    Hope this helps!
    Regards,
    Saumya

  • Assigning My Tasks according to Role Hierarchy

    Hi,
    I have to configure EP's <b>My Tasks</b> in such a way that Project Manager can assign the tasks to his team members but team member should not be able to assign the task to his Manager. i.e. I want to assign the task hierarchically.
    Can some one tell that how can I configure My Tasks for this requirement? I am using EP6.
    Thanks in advance.
    Manish

    First thanks to everyone providing me lots of information regarding OS & Java internals
    The problem that I am facing is,
    There are multiple applications running on one Solaris box say Application-1 and Application-2. Now due several design holes Application-1 eating up most of the CPU cycles(Not all the time but during upgrades, reporting etc) Please note Application-1 need to run no matter whether it is eating CPU or not.
    Now Application-2 is having two sub component
    1. Reading binary data from several clients (High priority task)
    2. Parsing those data(well performance tuned java code with high CPU utilization)
    In this above scenario if Application-2 sub component (2) runs along with Application-1 which consumes most of the CPU cycle then the whole system will be state to function.
    I know the answer will be to tune the code which eats the max CPU and fix the problem, but you need to consider this is one application of 7 years age and still the development is happening on top it.
    So only possible solution from my side to isolate the component I can reduce the priority of execution and wait till the component which can not be get delayed processing. Means yield Application-2 sub component &ndash; 2 for Application-1 to complete its processing.
    Sounds strange right? But I am not finding any other ways to solve this issue immediately
    So the solution I figured out is to have a component to check the System recourse Utilization and yield Application-2 sub component-2 till have enough CPU to proceed(Again I know it really a bad way to solve an issue)

  • How can i add one field in the container for the standard task-90310004?

    Hi,
    Please let me know thw steps to add one field in the container for the standard task-90310004.
    Usefull suggestions will be rewarded.
    Regards,
    Neslin.

    <b>Hi,
    Containers are used for holding Application data for Workflow purposes.
    Event container
    Task container
    Workflow container
    Role container
    Binding is the linking of data from one container to the other for making data available all across the workflow.
    But you can get values from one container to another container like this
    Container(Con)
    1. WF Con to Role, Wf con to task con, Wf con to event
    and
    2. Event con to wf con, task con to wof con
    and
    3. Method con to task con
    and
    4. Task con to method con
    So, we don't have direct possible binding from task con to task con.
    Thanks and Regards,
    Prabhakar Dharmala</b>
    Message was edited by:
            Prabhakar Dharmala
        But you can do pass values from first task con to wf con and again from wf con to another task con

  • WorfFlow Agent Assignment at Task Level...

    Hi,
    I have problem in Workflow agent assignment...
    In agent assignment at Task (MM Invoices Parked/Posted) level, I have assigned a position(Account Payable)to AC Role...
    Under this position, there are 8 users....
    In the Workflow process,At this task level the work item is going to only one person inbox not all these 8 users...
    Can you please advise me, where I was wrong...
    Warm Regards,
    Thirupathi....

    Hi Thirupathi,
    There are a couple of things you can try:
    - Agent assignment gets buffered in HR, normally refreshed at midnight. Use txn SWU_OBUF to refresh them manually.
    - Are all agents also possible agents of the task or is the task defined as a general task?
    - (just adding the obvious) make sure your task is in status READY, else it would have been reserved by someone.
    Cheers
    Mike

  • Agent assignment for task

    Hi,
         I have copied the standard task TS00008267( Generic Decicion Task) into another task. But when i use the new task, it says no agent assignment.
    when I looked into agent assignment mentioned for  TS00008267( Generic Decicion Task), it has got "Demo workflows" and "Records Management" as 2 task groups maintained in it.
    How can I add these 2 inside my own created task which is a copy of TS00008267 ?
    I am new to the workflow concepts. Any help is aprreciated and rewarded.
    Regds
    Gautam

    You don't need to add those task groups, but you should make it a generic decision task.
    1) Go to PFTC, open your copied task in change mode
    2) Select menu item "Additonal data", "Agent assignment", "Maintain".
    3) Select the top line in the screen (there is probably only one), the one that has the ID of your task (TS 9nnnnnnn) and press the button "Attributes" (or select menu item "Edit", "Attributes")
    4) Select the radio button "General Task"
    5) Close dialog box, F3 out to the main menu
    Done. ... Unless the task was already a general task. Then there is something else wrong.
    Message was edited by Kjetil Kilhavn:
    Shame on me. Yes, you should search the forums as Martin reminds you - I should have mentioned that. Saves both you and us a lot of time. You find your answers sooner, we don't have to answer the same questions over, and over again.

  • Federation, remote role assignment based on ABAP roles on producer

    Hi all,
    We have implemented the federated portal solution for our ESS users. We use the ABAP stack of the producer portal as user store for consumer and have no problems in assigning portal roles on our consumer based on ABAP roles in the backend (displayed as groups in the portal).
    Now we want to add some extra functionality (eg SRM and eRec) and we encounter some problems. These systems all have their own ABAP stack as user store. We have maintained the functional authorization model in the ABAP roles for instance in SRM. So an example:
    System I: ABAP + JAVA --> ECC 6.0
    Here we have the standard R/3 functionality and the producer portal (A) installed. Roles created on producer portal and assigned based on ABAP roles.
    System II: JAVA --> NW 7.0 Portal
    Our consumer portal (B) where we use roles created on the producer portal (A) on System I.
    System III: ABAP + JAVA --> SRM
    Our SRM system with SRM producer portal (C). In the ABAP stack of this sytem the functional SRM roles have been assigned to the users. We have created functional SRM Portal roles in order to use remote role assignment on consumer portal (B).
    +PROBLEM+
    We want to remotely assign portal roles created on the SRM Producer (C) to users on the consumer portal (B), based on the ABAP role assignment in the backend of system III. How can we achieve this in a fast and efficient way?
    Looking forward to your ideas. Anything helpfull will be gladly awarded with SDN points.
    Best regards,
    Jan Laros

    Jan,
    Interesting question. Let me share my experience and hope that's of some use to you.
    We started off federating corporate NetWeaver Portal (lets say B, parallel to your convention) as consumers to BI Portals (Lets say A).
    - B's UME points to Active Directory
    - A's UME points to BI ABAP user store
    - User ids are identical in both systems
    We ran into the problem of dual administration ((de)assigning portal role on both portals instead of just one) for a long time. The issue was because of different reasons at different times as we patched B's and A's. At one point we were on SP15 on both portals and we were told by SAP that RRA can be done on B for remote roles and the assignment propagates to A automatically if the following configuration is set up on both A and B.
    - A's permissions are relaxed allowing "Everyone" group checked for "End User" access as per ([http://help.sap.com/saphelp_nw04s/helpdata/en/43/2236fc0b413fe1e10000000a11466f/content.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/43/2236fc0b413fe1e10000000a11466f/content.htm]
    However, we chose not to do the permission relaxation as enabling "Everyone" group with "End User" access can allow anyone to launch an iView (if the URL is known somehow) and the user would be able to see the layout of the iView, which can include text, etc. The user won't be able to access any data though, however, there is certain compromise on security which we decided that its not okay. So, we digressed in SAP's suggested practice because of security reasons.
    Today we, manage security on B using Active Directory groups and on A using Java groups (ABAP roles).
    In your case, I suggest investigating the option of relaxing the security on producer portal like in the above link. If you think its okay, all you have to do is, provision users on B by assigning remote roles from C and A.
    Either my story is applicable or I must have got you totally wrong,
    Kiran

  • Determine possible agents of a standard task

    Dear Experts,
    is there any way to find out the possible agents of a Standard Task. The agents are assigned fix. Without any rule.
    Not for the runtime but for the definition time.
    I searched for function module but didn't find anything.
    Do you have a hint for me in which tables the possible agents of an standard task are saved.
    Thanks a lot for your help.
    with kind regards
    goekselin

    Function SWD_GET_TASK_AGENTS should do the job for you, if I remember correctly.
    Regards,
    Karri

  • View sites without assigning "Web Page Composer" role

    I have created a site in web page composer, created a "Test" role in portal and connected it with the site.
    Now the requirement is to assign the "Test" role to users so that users can see the output of the sites as a visitor but they should not be assigned the "Web Page Composer" role.
    I removed the role "Web Page Composer" from users and assigned them the "Test" role to view the output. As a result, they are able to open the site but do not see any content.

    Hello Arpita,
    You should check the initial configuration steps from the online documentation
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/3fea9ff34d4a18e10000000a114a6b/frameset.htm
    Do you have the Everyone group assigned to the Standard User role (eu_role), and have you assigned your test user to the Everyone group? 
    Check the following documentation:
    http://help.sap.com/saphelp_nw70/helpdata/EN/47/f0f7415e639c39e10000000a155106/frameset.htm                          
    Regards,
    Lorcan.

  • Help on how to add an Standard Task to a position

    Hi all!
    I would like to know if someone can explain me how to assign a an standard task to a user/position via TCODE PFTC.
    Thanks in advance for your help!
    Andrea

    Rose,
    Don't add anything in Expression (workflow step) and add your positions or jobs or dierctly user or Org unit to the task all the people under that org unit or position or job or users which are assign to that task will recieve that mail.
    Now after this if you add a rule in Expression (workflow) then if you get somebody from that rule who is not assigned to the task he won't recieve the mail.
    Responsible agents are generally assigned at workflow step level but they can also be assigned at task level.
    Responsible agents should also be possible agents....hope you know this.

  • TS - Standard Task object type

    Hi Gurus,
    I am trying to assign the  object type TS - Standard task for the tcode - PO13 (position), but i am getting the error as Standard task does not exist (ID of related object field).  I have searched in R/3 to create TS - Standard task, but not available.  Please suggest me where to be done.
    Vijay.

    Standard Task mainly used by Tech consultants in Workflows.
    Inputs from SAP doc......
    The standard tasks provided by SAP are generally used as steps in a workflow template. They are available as "modules" which you can use for your own developments.
    If a workflow scenario only involves one standard task, it can usually be regarded as a minimal solution for showing the connection between application functionality and SAP Business Workflow. For differentiated workflow management, this standard task should be replaced by a customer-specific workflow task
    Mohan

  • Removing the user from standard task group

    Experts,
    I need to remove the one user from the standard task "Display MC Document (outbound w/o IDoc)". Since it is a standard task I'm not able to make any changes.
    I hope I need to change in the agent which is assigned to this task. But donno how to find the agents assigned to this task.
    Please help me in resolving this.
    Thanks,
    Naveen

    Hi Naveen,
    If that user assigned as the 'Possible agent' of the task then you can remove the user easily.
    In the workflow template, go that activity. Under the Task ID there is a option called 'Agents' and click that icon to open. In the new screen, the possible agents of this task will be displayed.
    Select the desired user and delete it.
    Thanks,
    Viji.

  • Create a standard task

    Hi, I'm trying to create a standard task. To prove it I assigned it to me, but I don't receive anything, so I don't know how I can execute it.
    I have done everything following the online help, but I think it's not enough, because I haven't go the results I want.
    I can see in some reports that my standard task has been created, but nothing else.
    Thanks in advance. Conchi

    Hi Conchi,
    Do you mean that you don't receive an email after you have created a task in the collaboration rooom?
    You should first check that whether you have integrate the Exchange server correctly? Second, have you set the user mapping of the Exchange server correctly?
    Best regards,
    Marcus

Maybe you are looking for