Assigning standard text to smartform
Hi everybody
i need to create standard text and that text has to be assigned to the form
how to do this.
regards
Srinu
Hi Srinu,
You can go through this document for more details...
http://esnips.com/doc/7e67af5c-6188-4252-8613-41816756d560/from-sappres.pdf
<b>Close the thread once it is resolved.</b>
Regards,
SP.
Similar Messages
-
How to add standard text in smartforms?
Hi friends,
How to add standard text in smartforms ?
points rewarded soon
Regards
RHCreating the Standard Text:
Go to SO10
1. Enter Text Name. For example, ZABC
2. Text ID ST
3. Language EN
Click on Create.
And enter the Required Information and save.
To include a Standard text in SmartForm.
Follow the steps below:
1. Create a text node in the window.
2. Under general attributes select "Include text" as Type.
3. Specify the fields under Text.
Text Name ZABC
Text Object TEXT
Text ID ST
Language EN.
Hope it helps.
Regards. -
How to use standard texts in smartforms
Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10 -
hi,
I want to include one standard text in smartform how cani do itFor long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above -
How to use a standard text in Smartform ?
hi all...
iam want to use standard text in smartform ?
can any one tell me how to do this ?
Thanks
sandyuse function module READ_TEXT to read standard text .
Regards,
Shiva Kumar -
Hi..how we enter standard text for smartform using include text
hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get textHi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad -
How to assign standard texts assign dynamically to smart forms
Dear Experts
I need your help in adjusting the smart form texts dynamically. I will explain you the situation please revert me your valuable answers.
1. I am integrating 12 smart forms using same program.
2. Out of 12 smart forms 4 forms are having similar kind of template. Client is requesting like create one smart form template.
3. By creating the standard texts you can assign the standard texts into smart form during runtime dynamically.
4. Maintain all standard texts for smart forms in another custom table, during run time of the program you can assign the standard texts to smart form.
5. Here my question is how to assign the standard texts to template texts dynamically ?
Please revert me your suggessions.
Thanks for your support.Hi Indra neel ,
You are maintaining all the standard texts in custom table right, u need to get standard text based on condition which works for your smartform
than create text module in smartforms and change that to include text and give the variable name or internal tbale with field name in that text name fields and press (>) button and give the remaining fields in that than that will work dynamically -
Standard text in Smartform Vs. SapScript.
Hello,
I am experiencing an issue regarding standard texts in forms. If we were to create the text and format it in a certain way it may display in a SapScript form correctly, but in the Smartform it will be a little off. This also happens the other way around. Has anybody found a way to resolve this so that the formatted text displays the same way in both types of forms?Thanks for your response, yes the window is wide enough. What it seems to be is mainly in the tabs of the standard text. For example...
Here is some text,,,,,,More text
some txt,,,,,,More
In a SapScript it may show:
*I am using periods because simply using spaces is ignored. Disregard the periods.
Here is some text...............................More text
some txt............................................More
where in a smartform it would show something like
Here is some text..............................More text
some txt ..............More
In these cases, the width of the window in which the text is displayed is more than adequate. If I format it so that it will display correctly in the Smartform, then it would be mis-formatted in the SapScript -
Assign standard text (SO10) in transport request
Hi Experts,
How can i assign the standard text i've created in SO10 to a transport request. Thanks!
Best Regards,
KurttHi,
Refer note 3355 in OSS for a complete explanation. The SAPscript objects that should be transported must be written in a transport request.
The entries are as follows:
R3TR FORM NAME (NAME = Name of the layout set)
R3TR STYL NAME (NAME = Name of the style)
R3TR TEXT OBJECT,NAME,ID,L
(OBJECT = Text object, NAME = Text name, ID = Text ID, L = Text language)
If you want to transport a number of texts, you can use report RSTXTRAN to insert the individual text keys into a correction. The transport request must be entered and released via the transport system.
Regards
Sudheer -
Hi,
I tried to create a standard text in russian language.But the characters are coming as ???? . Please give me solutionHi Soumya,
I tried to create a standard text in RUSSIAN in SO10, I am not facing any problem as you mentioned. Please check whether RUSSIAN language is installed in the system and try again.
Regards,
Avi.... -
Need to use standard text in smartforms
Hi,
My requirement is like to use standard text for the address like ...
Company Name
Street, State, PIN
Phone: 111-111-1111
All the above lines should be aligned in the middle and 'Company Name' should be displayed in the bold.
1) I have created the standard text, and included statement in text window as 'INCLUDE XXXX OBJECT TEXT ID ST LANGUAGE EN' but unfortunately it was not displaying anything in the output.
2) I have tried the another method like using the 'Include Text' as a text type in the text window. It was coming but BOLD and center alignment was not coming.
Here my question is why it was not coming in 1) case and if i use READ_TEXT function module will it solve the problem ? in case 2) how can i get all the 3 lines gets center aligned and first line should be bold.
Thanks in advance for your help.Hi Jaya ,
if u wnt ur Addr first line should come in bold letter than for that
u first *** to "sap smart forms : initial screen" there is option 'STYLE' click on that radiobutton and creat ur own STYLE (Zxxx) on there u vl find al ur answer...
hope this vl help u ,
plz reward paint.
regards
wasim
Edited by: mdwasim akram on Jun 11, 2008 1:09 PM -
Deleting standard text in smartforms
HI,
i have a standard text name rule1 . first i copied this into rule2 and made the reqiured changes in rule2.
so now i want to delete rule1 and and save rule2 as rule1 again.
so can u plz tell me how to delete rule1 and save rule2 as rule1 standard text.
regards
SiriHi,
Go to So10 transaction.
Open rule1 and then Text---> delete.
Then open rule2 then text--->save text as
give the rule1 as name..
Thats all..
cheers,
Simha. -
Dynamic Standard text in SmartForms
Hi,
I have requirwemnt where I need to retrive the data from the Standard text to display.
But it variews based on SalesOrge and Comany Code u2018Zxxxx_SALES_yyyyu2019 here XXXX is SalesOrge and YYYY Company code.
How to call the standard text Dynamically in Samrtform?
Regards
IrfanHi,
For displaying standard text dynamically, just follow the following steps:
1. Create a text element and in general attributes give type as Include Text.
2. Instead of providing any static Standard text in Text Name field, you need to click on the arrow button pointing right, which is for Dynamic Field Value. There you can provide your variable as &VARIABLE&, which contains the standard text name based on the conditions.
3. Pass value statically like Text Object-TEXT, Text ID - ST , Language - EN or else you can passs them dynamically as per your requirement.
As you will be passing variables in order to print dynamic standard texts, it is better to check the option "No error if no text exists".
Karthik
Edited by: Karthik S on Sep 2, 2010 2:40 PM -
Hi,
I have trans code me42 (RFQ).....
For EBELN = 6000000026 i have 2 line items say having 2 material numbers and their quant, units and delivery date etc....
Ok Now I select first line item and then i go to item -
> Texts------>text overview
I get item text and Material PO text. And then I double clik on any one of the text it goes to text editor and then i Go to----> Header.
I get the text id-- A01
textname-- 600000002600010
text object-- EKPO
language-- EN
Now I have all the information other than item text and material Po text.
I just kno it is sumthing related to include text but I dont kno how to display it in layout....
What is the procedure step by step?
First tell how to declare it in smartforms and then in calling program from wer i m goin to display.
Please tell me step by step both in smartforms and calling program.
Also For one line item 'text name' is 600000002600010, text ID is A01A03 and For other line item it is 600000002600020 and text ID is A01 A03.Just write the code within smartform by using program lines..
pass ur rfq number and item number to form routine.
in the form routine call read_text Function module ,this fm will get the text .. -
Standard Text in Smartforms using SO10 Transaction
Hi,
My requirement is i have IF Condition followed by Elseif. when ever any of above conditions satisfy i need to print a text of at least 5 lines.
If <>
Print Text upto 5 lines each line at least 100 char(text1)
elseif <>
Print Text upto 5 lines each line at least 100 char(text2).
else <>
text24.
If solution for the above is using SO10 Tcode then plz expain me in detail.
thanx in advanceHi
Check this
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
Regards
Anji
Maybe you are looking for
-
Scanning multiple pages to multiple pdf on HP Laserjet M3035
We have a Laserjet M3035 MFP installed as network printer. We can scan multiple pages in to a single PDF to a folder on the server. We would like to scan multiple pages to multiple PDF to a folder on the server. e.g. one page to one pdf with the ADF
-
Dent in side of MB Pro means ports are unusable - how much to repair?
Hello, Whilst inside a suitcase my Macbook Pro has suffered a dent to its lower left hand side, so that one of the USB ports, SD card slot and headphone slot are unusable as the casing has come out of place. I have tried to get compensation from the
-
Recently purchased iPhone 5. Tried to register and sync with iTines
I recently purchased iPhone 5. I have had iTunes for years and have many iPods and iPads connected to this iTunes account. I attempted to register and sync the iPhone 5 and though is shows I am logged into iTunes ALL my music, etc is GONE and it s
-
Very urgent-gap analysis -two examples
please explain me with examples of gap analysis and how do you fill the gap and also there are two movement types in schedule line cat , what is the purpose of two early responders will be definitely rewarded thanks & regards
-
Has anyone seen this error message before? If so, any suggestions?
Happens whenever the user tries to add a signature to a PDF.