Assigning user status to order type
Hi All,
There is an query. Can I assign 2 user statuses to an order type?
regards,
Mohit Goyal
Hi Mohit,
A user status is activated by the user and can be created as an addition to the existing system status. You can define and
activate any number of user statuses. To define a user status, you need to have created a status profile, which is created per order type in Customizing
Hope clear to you.
Regards,
R.Brahmankar
Similar Messages
-
Re: assign profit center to order type
hi gurus,
good morning to everybody,
i have a question i have 1000 materials in my organization using by 5 company codes in that few material i need to assign profit center so i went to mm change and assigned the profit center for sales:general/plant and plant data/stor.2, if i want to assign profit center to order type how can i assign, if i cannot assign in order type i need to assign profit center in mm change for 500 materials, so if i change manually in mm change for 500 materials is it going to effect for the other company code when they post the transactions please give me your opinions.
thanks in advance and points will be assign for useful answers.
kumar.Dear Kumar
Go to VA02, input the sale order reference and execute. There double click on the line item and select the tab "Account Assignment". There you can see the field "Profit Center".
As I said in your other thread, if you have generated subsequent documents like delivery or billing, you cannot change this for that line item. You have to close this line item by assigning "Reason for Rejection", and create a new line item but then, b4 doing this, you should have changed the profit center in material master.
Alternatively, if you want to update in bulk, go to T.Code MASS, input "BUS2032" in Object Type and execute. There select "Sales Order Item Data" and click on "Fields".
Select the field name "MASSVBAP-PRCTR" and execute. Either you can input the sale order references for which you would like to change or just execute.
Now you will have a screen "New Values" on top and below the existing sale orders listed. Give the new profit center against the field "New Values" and execute.
thanks
G. Lakshmipathi -
Hi,
In the order CO02 :
My customer need when selecting the user status Z0001 and save, the system re-edit automaticaly the production order and also the order confirmation from the customer order attached to my production order.
How can we do this?
Thanks for your help.Hi
I think using user status only this will not possible, you need to check the enhancements. Becuse production order user status only control the function of the production order.
Thanks
S.Murali -
User status for order confirmation
Dear Expert
My requirement is when system status for maintenance order is CNF and authorize person agreed with all data in confirmation, he will set user status and then only I can complete my order (Teco).
Till now I created one user status OCAP (operation conf aprroved. ) and I allowded TECO only at this status. when system will have any other user status TECO is forrbiden. and it is working fine.
but now if my order is not CNF and person approves order(select OCAP) system allow to do TECO.
How I can stop this?
I mean if order status is not CNF even person select any user status system should not allow for TECO. If both condition are correct then only system will allow for TECo.
Please suggest
Regards,
Prasadsolved.
it is only works for operation
and not order header -
No default USER STATUS in order with radio buttons
Hi friends,
We want to have 4 user status in PM order with radio buttons so that
user can choose only one at a time.But by default after creating order
No user status should be defaulted.Only it should display when user
selects one.
I have tried in SPRO but for radio buttons it selects one as default
automatically.
Is there any alternative.
With Regards
AMehraHi Pete,
I know this is standard only.But client's requirement is like this.
All the four status are like that we can choose only one
like PASS FAIL.
Now these two can not be set together.
thnx
Edited by: aachal on Jan 31, 2011 9:29 AM
Edited by: aachal on Jan 31, 2011 9:30 AM -
Setting System status on assigning User status
We can change the user status by changing the system status ...
is there some work around to change a system status e.g REL on Setting a User Status .. ?
Please advise. ThanksHi,
I think this is possible using "Maintain Substitutions", but no sure. Try out once.
SRP0 - Project Systems -> Structures ->Operative structures -> Work Breakdown Structures (WBS) -> Maintain Substitutions.
Regards,
Punith. -
RUNTIME Error - User Status for Order release
HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors MESSAGE_TYPE_X
Date and Time 31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID l_excp->t100_msg-msgid
11
TYPE 'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD. "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64
SWW_WI_CREATE_VIA_EVENT
8 FORM SAPLSWW_SRV LSWW_SRVU11 1
SWW_WI_CREATE_VIA_EVENT
7 FORM SAPMSSY1 SAPMSSY1 271
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 115
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 386
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCU02 1
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 26 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 25 Ty. METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 24 Ty. METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store = 0xE06D6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 224 (0xE0000000)
label = 758 (0xF6020000)
fill = 1 (0x01000000)
leng = 570 (0x3A020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000046
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x80095FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 540 (0x1C020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store = 0x106F6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 225 (0xE1000000)
label = 760 (0xF8020000)
fill = 9 (0x09000000)
leng = 510 (0xFE010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000045
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x402D5FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 541 (0x1D020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No. 23 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store = 0x806B6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 207 (0xCF000000)
label = 752 (0xF0020000)
fill = 1 (0x01000000)
leng = 28 (0x1C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000022
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0696DEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 537 (0x19020000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No. 22 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 21 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store = 0x90CE53EFF9060000
ext1 = 0xB04D6BEFF9060000
shmId = 0 (0x00000000)
id = 112 (0x70000000)
label = 279 (0x17010000)
fill = 30 (0x1E000000)
leng = 152 (0x98000000)
loop = 400 (0x90010000)
xtyp = TYPE#000009
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C453EFF9060000
pgHook = 0xF0CE53EFF9060000
idxPtr = 0x50E253EFF9060000
shmTabhSet = 0x0000000000000000
id = 207 (0xCF000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x204C6BEFF9060000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR 01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No. 20 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>Hello,
Get help from your abaper on this.
Vinay -
Item User Status - Sales Order
1- The cancellation item is created with reference to an existing line item on Sales Order. How is done?
2- I would like to see the original item have its status for both delivery and billing changed to completed and have its overall status completed as long as a PO is created. I don't know how to do that...
Can you help???
ThankssHi Miquel,
For that T.code we have user exits and badi. I am providing all the userexits and badi plz gothrough that.
Transaction Code - VA02 Change Sales Order
Enhancement/ Business Add-in Description
Enhancement
V60F0001 SD Billing plan (customer enhancement) dif
V46H0001 SD Customer functions for resource-related
V45W0001 SD Service Management: Forward Contract Da
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company cod
V45L0001 SD component supplier processing (customer
V45E0002 Data transfer in procurement elements (PRr
V45E0001 Update the purchase order from the sales o
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for produc
SDTRM001 Reschedule schedule lines without a new AT
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related
No.of Exits: 15
No.of BADis: 2
Which one is suitable plz check it out and put breakpoint after providing the logic .
Rewrds some points.
Rgds,
P.Nag -
Assigning User Exit for Substitution type 003 - OBBH
Hi Gurus,
I have created a Sustitution for the complete document i.e type 003 for replacing Assingment Field with PO number during MIRO.
I have copied the standard program RGGB000 in to Z.. add my user eixt and have written the code. But i dont know how and where to assign the user exit that i hav created.
Could anyone please help on this...
Thanks in advance.
Raj.Hi,
It's done via GCX2 transaction. Please, consult note 842318 for further info.
Regards,
Eli -
hi!
I've created 4 text id in <SE75> for crm order header. I need "associate" this text to order...
someone could help me?
thnks!!!Dear Amit,
Do these settings to copy the sales order text to the invoice.First you need to copy the sales order text to the delivery document from the delivery document you can copy the text to the billing document.
To copy the sales order text to the delivery document
You do the text determination for the deliveries also,define and maintain same TextId in teh delivery header text procedure ,maintain the access sequence ,in the delivery text procedure access sequence you put the Text Object as VBBK for that Text ID.
To copy the delivery text to the invoice.
You mentioned that you already done the text determination for the billing document so just do this single setting.
Go to VOFA transaction then selct billing document type then go in to the details screen here you do the check in the Delivery Text check Box (Top most bottom of the screen.)
Now you can able to copy the sales order text to the invoice.
I hope this will help you,
Regards,
Murali. -
PM order user status authorization
Hi Experts,
How can i give authorization to user status of PM Order ?
I want to give authorization for different activites as below.
for example i only want authorization for 01 and 04. Is this possible?
01 ACLD
02 BASL
03 MABE
04 ISBE
05 MIBE
thanks.Hi,
In addition to Narasimhan & Wendy told, follow these steps
Activities
1. create authorization keys in BS52
2. Create User Statuses & assign to Maintenance Order Object types in OIBS
3. Assign the authorization key to one or more user statuses in your status profile.
4. Assign these User Statuses to Order Types in OIOG
5. Define corresponding authorizations and include them in the relevant authorization profiles.
6. Assign these Authorisation Profiles to the User groups in SU01 under Profiles sub screen.
Regards,
Maheswaran. -
User status profiles for work orders and sub-orders
Hi Experts,
I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
Customizing
A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
Situation
The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
Problem
- If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
- If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
Question
Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
Thanks a lot!hi
since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
regards
thyagarajan -
System status and user status don't appear in maintenance order
I can't see the user status or the system status in the maintenance order header or equipment header or any report although when pressing the button information you can see it
Hi Michael Nawar ,
Please check have you define Status profile and status in T code OIBS ? , and for object like PM order whether you have assigned it to your defined order type in T code OIOG ?
and for equipment check in SPRO Master Data in Plant Maintenance and Customer Service >> Technical Objects >> Equipment >>Assign User Status Profile to Equipment Category.
Riyaj -
Activation of User status for Prod. order
Hi,
I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
the requirement is after settlement the user status should get activated for production order.
Regards
Amit ParkhiHi Amit,
As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
Pls. go through the following procedure for activating the User Status :
Activating User Statuses
Use
You can activate a user status at order header and at operation level.
Procedure
Order Header Level
Go to the order header.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Operation Level
Go to the operation overview.
Select the operation in question.
Choose .
Choose Edit ® Direct entry.
The system displays a dialog box in which you can select the permitted user statuses.
Position the cursor on the required user status and choose Choose .
Pls. follow the above procedure as per rquirement and set user status accodingly.
Pls. revert if any doubt and reward if useful.
Regards,
Tejas
Edited by: Tejas Pujara on Jun 23, 2008 8:10 AM
Edited by: Tejas Pujara on Jun 23, 2008 8:11 AM -
Settlement Strategy Sequence assignment to Order type
Customized settlement strategy sequence are created in KSR2_ORC
and assigned to internal order types in KSR3_ORC
It is not allowing to assign to plant maintenance order types.
Anyway it is possible to assign to PM01 order types ?
Thankshi
check this path in spro
Internal Orders --> Actual Postings -->Settlement --> Automatic Generation of Settlement Rules --> Assign Strategy Sequence To Order Type
Maybe you are looking for
-
Itunes freezes after enabling Home Sharing
I've got a 64bit Windows 7 Machine. I've also got an itunes server on the network. I try to share my pc library in home sharing and it causes iTunes to freeze. I've tried deleting the preferences file to no avail. I'm assuming that it's some sort
-
Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?
-
Audio suddenly dose not work!! PLEASE HELP
I just tried to watch a youtube video and there was no audio. I tried some other things which should have sound, no sound.... I tried raising and lowering the audio level (didn't even play the little poppy sounds for each level of audio change) but s
-
Hi gurus i am running sapinst installing sap 47 on sql 2005 server and iam getting this error : Wrong server collation :J2ee installatin requires SQL_LATIN_GENERAL_CP850_BIN collation. I have checkek there is a note but it seems its applying to SQL
-
Apache Tomcat/4.0.6 - HTTP Status 500 Help!!!
When I requst a simple jsp page, I got error: (I have set my env as: ----CLASSPATH as C:\Program Files\Apache Tomcat 4.0\common\lib\servlet.jar;C:\j2sdk1.4.2_01\lib\tools.jar;C:\j2sdk1.4.2_01\lib\dt.jar ----JAVA_HOME as C:\j2sdk1.4.2_01 ----path as C