Assigning value to field in proxy report

Hello,
I am writing the abap report for sproxy.
The link to the field in structure is very long.
e.g. it-fault_message_mt-request-calldata-requester-gid = 'Z12345'.
In the structure one field in calldata is ADDITIONAL_ATTRIBUTE which is of table type.
I want to assign values to the fields of ADDITIONAL_ATTRIBUTE.
When I click on field ADDITIONAL_ATTRIBUTE we can see line type ZFAULT_MESSAGE_ADDITIONAL_ATTR and this line type is having NAME as on of the field.
I want to pass value to field NAME.
Regards,
Neelambari

Hi,
Create a work area as line type. and loop at table type into work area.
*wa like line type
*loop at table_type into wa.
*wa-name = Value.
*append wa to target table type.
****target table type structure should be  same as that of source table type. *****
Sachin

Similar Messages

  • BP Transaction : Assign values to fields upon selection of BP role ?

    Hi All,
    I want to assign values to Grouping and Account Group fields in BP transaction in CRM.
    Is there any BADI or Userexit to achive the same. If possible kindly explain the steps to be implemented to use the BADI.
    Thanks & Regards,
    Navneeth K.

    Hi Navneeth,
    There are 2 ways to approach this :
    1. You can create an application transaction for the standard transaction BP. This will open the transaction in whichever role you require, default a groupng, and allow you to control some other initializaittion parameters. This is very similar the transaction variant mentioned above by Adil.
    You can explore 'Application Transactions' through SPRO->Cross Application>SAP Business Partner-> Business Partner> BAsic Settings>Business Partner Roles>Define Application Transactions.
    2. To default grouping , you can use BADI BUPA_NUMBER_GROUP. THe BADI will receive the list of groupings that will be shown in the dropdown .Write the implementation so as to remove unwanted groupins and keep only the number groupig you wish to default.
    Hope this helps.
    Cheers,
    Rishu.

  • Assigning value to Field - Symbol ( which is type of internal table field )

    Hi All,
      I am facing problem to assign the value to a field symbol. My requirement is creating a dynamic internal table and populate values into that internal table, so that i can display the values .
      I am having a structure with fields like status , Plant1 name , Plant2 name.....Plant n .
      So i declared an internal table it_tab with this structure.
      I am having one more table which having number of records for Plant1 ,Plant 2 ,....Plant n based on some condition.
      I need to count the number of records for Plant1 and i need to put in the internal table it_tab.
      For this i created field-symbol .
    Here, t_deployment table will have the plants 1,2,3...and
         t_devobject will have some records for these plants.
    LOOP AT T_DEPLOYMENT. 
    clear w_count.
    LOOP AT T_DEVOBJECT WHERE ZDEPLOYMENT = T_DEPLOYMENT-DOMVALUE_L AND
                              ZADSTATUS = '10'.
    w_count = w_count + 1.
    ENDLOOP.
    concatenate 'it_tab-' t_deployment-domvalue_l into var_bet_name.
    assign var_bet_name to <bet_var_name>.
    now my internal table field i.e. it_tab-plant1 came into <bet_var_name> . But i want to assign a value for it.
    at last what i need is it_tab-plant1 = w_count.
    whaterver the w_count has value that needs to assign to it_tab-plant1. But i don't want to assign directly it it_tab-plant1. I want to assign dynamically. Because tommorrow some more plants added to t_deployments , i don't want to make changes to my program. It should take care....w/o changing the program.
    I tried the following statement.
    (<bet_var_name>) = w_count. But its not working.
    Please let me know how i can get this.
    Thanks in Advance.
    Pavan.

    Hi pavan,
    As ur requirement is creating a dynamic internal table,
    try the following way,
    remember the fieldcat should be of type LVC not SLIS.
    BUILD LT_LVCFIELDCAT in a way that, the value from the internal table becomes the fieldname
    ex:-
    loop at it_models INTO WA_MODELS.
        LS_LVCFIELDCAT-FIELDNAME = WA_models-MODEL.
        LS_LVCFIELDCAT-SELTEXT = WA_models-MODEL.
    append ls_lvcfieldcat to lt_lvcfieldcat.
    endloop.
    DATA: DREF TYPE REF TO DATA,WA_REF TYPE REF TO DATA.
    FIELD-SYMBOLS: <TEMP_TAB> TYPE TABLE, <TEMP_WA> TYPE ANY.
    CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
        EXPORTING
          IT_FIELDCATALOG = LT_LVCFIELDCAT
        IMPORTING
          EP_TABLE        = DREF.
      ASSIGN dref->*  TO <TEMP_TAB>.
    now basing on the fieldcatalog <temp_tab> is build.
    NOW FILL <TEMP_TAB>.
    WHILE FILLING, ASSIGN COMPONENT IDX/NAME.....
    this statement will be very usefull.
    i hope this will be help full.
    pls reward the points if it helps u.
    regards
    Hyma

  • Assign value to field of table before calling function module

    hi,
    FM 'ABC' have some TABLES parameters.
    Before calling a function module 'ABC',i want to assign a value to one of the fields of the TABLES parameter.
    TAB1 is a name of parameter and field FLD1 is a name of the field of TAB1 which i want to update before calling 'ABC'.
    Thank you in advance.

    hi,
    1. store value in workarea
    tab1-fld1 = 'value'.
    2. append/modify the entry in tab1.
    append tab1.
    or
    modify tab1
    3. call your function module

  • Pass al values of field - go to report

    Hello, I need to pass all values of a field inestead of First or Last in Action.
    I have the parent report with no paramenters. I have enbled a text box to go to other report that acepts parameters. However I can only pass the First or Last value. How I can pass all values?
    For example, I have got this table. The names of computers of server. If we click on blue number (CountDisntinct) we go to other report.
    If I execute the report we have got this:
    If I click on number 3 I need to pass the three names to other report which show more details about these Computers. If I click on128
    I need to pass 128 names of computers. How I can pass these names?
    Thanks!

    Ok, thanks! And is it possible to pass all values of a field? I have this problem in this report.
    If I click ontotal of server(For example
    6) I only pass Server but If I click on Name (for example
    1 or
    5) I need to pass Server and Item. If I do this it fails because can not pass diferents elemts to other report.
    How I can pass these names of computers? Is there solution?
    Thanks!

  • How to assign values to a work area which is a Field Symbol?

    Hello Experts!
    I really need your help! this is the problem:
    I need to assign values to fields into a work area which is a field symbol. The values come from a flat file I uploaded and as I can't know the length I had to build the structure dynamically ( That's why I'm using FS). Each field comes from the file separated by ';', I tried using the SPLIT sentence:
    "SPLIT text AT ';' INTO TABLE <dyn_table>." but the values are assigned vertically into the same field instead of horizontally into each field of the table(field-symbol table).
    I know the name of the field dynamically
    (a TEXT + number) and I know I can't do this
    <dyn_wa>-TEXT1 or field_name = 'TEXT1' <dyn_wa>-(field_name).... ohhh I'm blocked, I don't seem to find the answer, please help!
    Thanks in advance!!
    Frinee

    Now that you have a table with the values, you can move them to the work area.
    data: begin of wa,
          fld1(20) type c,
          fld2(20) type c,
          fld3(20) type c,
    *     and so on
          end of wa.
    data: istr type table of string with header line.
    field-symbols: <fs>.
    split text at ';' into table istr.
    loop at istr.
    assign component sy-tabix of structure wa to <fs>.
    if sy-subrc <> 0.
    exit.
    endif.
    <fs> = istr.
    endloop.
    write:/ wa-fld1, wa-fld2, wa-fld3.
    Now, WA has the values in a horizontal fashion.
    Regards,
    Rich Heilman

  • How to use the input entered in report parameters form & use it in a field in a report parameter.

    Hi, I'am creating a new report, which is a combination of 'form_letter & tabular' style.
    I have also created a Report Parameter with 2 inputs, that is 'to_date' & 'from_date'.
    The value that will be entered in 'to_date' & 'from_date' in the parameter_form, must get displayed in the report.
    So for this, I created a field for 'to_date' & added code for it in pl/sql editor.
    code is as below:
    function F_TO_DATEFormatTrigger return boolean is
      f_to_date date;
    begin
      f_to_date := :PF_P_TO_DATE;  // ASSIGNING VALUE TO FIELD ( f_to_date) FROM INPUT OF REPORT PARAMETER (PF_P_TO_DATE) .
      return (f_to_date);
    end;
    BUT I'M GETTING ERROR " REP-0730 THE FOLLOWING BIND VARIABLE IS NOT DEFINED: PF_P_TO_DATE.
    I tried to decode the error, but I think the problem is different. (The above code works only if "PF_P_TO_DATE" was a part of query statement, that is one of the columns in database, but PF_P_TO_DATE is a parameter). So can anybody please help me with how can I take the value from parameter input & display it on the field of the report?
    Thank You.

    Hi Vijetha,
    Create a formula column and return the date you need and asign the formula column to a field in paper layout.
    here is the example query
    function CF_to_dateFormula return Date is
    begin
       return (:to_date); -------:to_date is that you get as a parameter
    end;
    Hope this will help
    Regards
    su.gi

  • Get value of field object when I double click on any column of report

    Hi,
    We are converting our projects from .NET 2003 to .Net 2008 and upgrading reports10 to crystal reports 2008 and changing our Active x report viewer control  to crystal report viewer.
    We donu2019t use reports just to see and print the data. Our use is a bit more.
    As we were using Active X Control (CRAXDDRT) to perform different operations
    Following are some functions which are included in our requirements:
    1-     We need the columns width to be flexible which we can changed in the code dynamically according to the users wish
    2-     Setting text of some fields dynamically from .Net code
    3-     Hide and show the columns dynamically from .Net code
           Upto here we are done using crystal report 2008 and .net 2008
           Now we are stuck with problem
    4-     When we double click on fieldobject at runtime we are able to fetch the value of field object by using e.objectinfo.text.tostring, so far it is perfect
    But we have different situation here and need a solution for this
    I have two fields like Account ID and Account Description
    I need the solution so that when user clicks either on Account ID or Account Description I should be able to fetch the Field object value of Account ID Column only so that i will be able to open different forms and reports based on that ID
    As we were doing it before using Active X Control the code snippet is giving below
    case "Field: Account. AccountID ", "Field: Account.Description"
    GlobalCode = GiveCode(mYFields.Item(1).value) '------ Where 1 refer to Account ID, so in both cases either we click Account ID or Description Field at run time we are able to return the account ID field value.
    so we need solution some thing like that please do let us know how we can do that
    For Your reference we were using CrystalActivexReportViewerLib10.CRVFields obejct to fectch the report values
    Thanx in Advance
    Regards,
    Arshad Hussain Bhatt

    Hello,
    I am getting value of that cell where I am clicking. But I need the value of other columns also in that particular row where I double clicked. For this I gave one example also that suppose I have a report where there are two columns. One is AccountID and other is AccountDescription. Now if I click on Account ID I get the value of AccountID and when I click on AccountDescription I get the value of AccountDescripiton This is oK n good but I want that If i double click on AccountDescription I should be able to get the value of AccountID also.Please tell me is there anyway to do so?
    We did so when we were using CRAXDRT.Report Bellow is the code snippet for how I did it in that.
    Dim MyField As CrystalActiveXReportViewerLIb10.CRVFields
    Private Function GiveFieldIndex(ByVal As CrystalActiveXReportViewerLib10.CRVFields, ByVal FldName As String) As Integer
    For i as integer = 1 To FldArry.Count
        If FldArry.Item(i).name = FldName Then
                    GiveFieldIndex = i
          End If
    End Function
    Private Sub CRViewer1_DoubleClick(ByVal eventSender As System.Object, ByVal eventArgs As AxCrystalActiveXReportViewerLib10._ICRViewerEvents_DblClickedEvent) Handles CRViewer1.DblClicked
    If MyField.Name = "Field: AdoJV.AccountID" Or MyField.Name = "Field: AdoJV.AccountDesc" Then
    /Following line will give us AccountID in anycase either we click on AccountID or Account Desc or even you can add more column by adding Or Operator. We need something like this in Crystal Report 2008/
      Dim GlobeAddEditCode  as String = myFields.Item(GiveFieldIndex(myFields, "Field: AdoJV.AccountID")).Value
    End If
    End Sub
    Regards,
    Arshad Hussain Bhatt
    Edited by: arshhb on Oct 31, 2009 6:44 AM
    Edited by: arshhb on Oct 31, 2009 7:09 AM
    Edited by: arshhb on Oct 31, 2009 7:13 AM

  • How can i assign value to the certain field in dynmic table ?

    i have created a dynmic table .now i want to assign value to the certain field,how can i do that?
    for eg,
    <dyn_table> contains fields of  name age ,now i want assign 'jack' to this internal talbe's field name ,

    Hi,
    try this:
    FIELD-SYMBOLS: <GT_ITAB>      TYPE TABLE,
                   <GS_ITAB>,
                   <FS>, <FS1>.
    DATA: GT_DATA   TYPE REF TO DATA.
    DATA: GS_DATA   TYPE REF TO DATA.
    START-OF-SELECTION.
      CREATE DATA GT_DATA TYPE TABLE OF PA0002.
      ASSIGN GT_DATA->*   TO <GT_ITAB>.
      CREATE DATA GS_DATA    LIKE LINE OF <GT_ITAB>.
      ASSIGN GS_DATA->*      TO <GS_ITAB>.
      ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
      <FS> = 'Smith'.
      ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
      <FS> = 'Paul'.
      APPEND <GS_ITAB> TO <GT_ITAB>.
      ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
      <FS> = 'Jones'.
      ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
      <FS> = 'Martin'.
      APPEND <GS_ITAB> TO <GT_ITAB>.
      LOOP AT <GT_ITAB> INTO <GS_ITAB>.
        ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
        ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS1>.
        WRITE: / <FS>, <FS1>.
      ENDLOOP.
    Regards, Dieter

  • How to set a new value for formula field in crystal reports xi?

    <p>How to set a new value for formula field in crystal reports xi?</p><p>//formula</p><p>{@description}</p><p> </p><p>exemplo in VB6</p><p>crxSubreport.FormulaFields.Item(1).Text =  "&#39;Subreport Formula&#39;"  or</p><p>crxSubreport.FormulaFields.Item("description").Text =  "&#39;Subreport Formula&#39;"</p><p>How to in JRC?</p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p><p> </p>

    Hi,
    This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
    Regards,
    <p>Blair Wheadon</p>
    <p>Product Manager, Crystal Reports</p>

  • Fund center reports Assigned values are not matching with ledger balances.

    Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
    Now we are taking reports the assigned values are not matching with gl ledger balances.
    1. We need to update records for April- May.
    2. Records in between deactivated and activate time.
    Please suggest updating fund centers and commitments.
    Regards

    hi ELI
    i have checked the follwoing secnarios
    1. funds management deactivated.
    2. one document posted  with amount10000
    3. funds management activated.
    4. we have executed FMN0
    here no document is selected after execution.
    Please suggest what are the activities we need to do if i am wrong...
    Regards

  • How to assign values for more than one field

    Hi,
    I have written following code
    constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
    constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
    constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
    field-symbols: <L_FIELD>  TYPE ANY.
    field-symbols: <L_FIELD1> TYPE ANY.
    field-symbols: <L_FIELD2> TYPE ANY.
          Assign (fieldname) to <l_field>.
          <L_FIELD> = 'ZB'. " value according to your requirement
          Assign (fieldname1) to <l_field1>.
          <L_FIELD1> = 'ZB'.
    while debugging <l_field1> is not assinging (fieldname1).
    Im able to assing for (fieldname).
    how to assign value for (fieldname1).
    plz suggest me to assign values for more than one field.
    Regards,
    Brahmaji

    Hello,
    Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
    It is KNA1-LIFSD

  • LOV depending on value of field in report

    I have a report on a query. In one of the fields I want to have a Radio Group, Based on query based LOV. The values in the LOV depends on the value in the field in the report. Is this possible, and how do I define the LOV for it?
    Would it be something like:
    select disp_val d, id r
    from my_table
    where field_x = [value_of_this_field_in_my_report]
    order by 1What do I fill in for [value_of_this_field_in_my_report]?

    Please refer to Metalink note 825603.1.

  • Assignment on Multi-Valued Lookup field

    Hi experts,
    Is it possible to assign value to a multi-valued lookup field using assignment.
    For example, "Products" is the main table. In the products table I have a multi-valued attribute "PLANT". Product table contains a field "PLANT" of type look-up multivalued to the Plants table.
    So, is it possible to assign Plant attribute values to PLANT Look-up multivalued field in the main table using assignment??
    Is not, then is there any other work around solution to acheive this requirement?
    Best Regards,
    Shiv

    hi,
    So, is it possible to assign Plant attribute values to PLANT Look-up multivalued field in the main table using assignment??
    No this is not possible, to get the values of the plant attributes you again have to lookup at the plant master data and fetch the values from there in the routine.
    regards,
    Arvind.

  • Assigning values to 2 fields using sql statement

    db11g , apex 4.0 and firefox 24 ,
    hi all ,
    i am trying to follow this tutorial to assign values to 2 items on a page using sql statement ,
    and i am using the same sql statement the tutorial uses
    select d.loc location, count(e.empno) num_employees from dept d, emp e where d.deptno = e.deptno(+) and d.deptno = :P3_DEPTNO group by d.loc -- btw , what does the "+" sign mean?
    after the e.deptno in the where condition .
    but i am facing this error
    1 error has occurred
    Wrong number of columns selected in the SQL query. See Help of attribute for details.
    and it does not work with two columns in the select statement under any conditions , i tried to remove the group function and the group clause ,
    it does not work unless i use only one column in the select statement ??
    thanks

    Pars
    And how exactly is this rewrite of the sql statement resolving the OP's issue.
    You are still using more than 1 column which will still result in the error message:
    Wrong number of columns selected in the SQL query.
    As mentioned in my earlier post APEX 4.0 (the version the OP is using) does not handle a sql statement with multiple columns for the dynamic action Set Value.
    Which means the fastest  and simplest solution is splitting up the dynamic action in multiple Set Value actions.
    Using this plugin or upgrade to a newer apex version would also be a possibility.
    Nicolette

Maybe you are looking for