Assignment appears twice.

In Hpcm application, when I create assignment (via loading from relational table) each destination appears twice. However when I change from alias view to name view, everything seems ok. And in calculation stage there is an sql error that states " java.sql.SQLException: ORA-01427: single-row subquery returns more than one row". Please , hepl me to solve this problem.

Hi,
I guess that there was a change in the calendar definition, or assignment of a new calendar.
You can't fix it directly, as there's nothing to fix. If there's such a change, then the data that was there before the change is displayed in a separate column, like in your case.
Just to check, go to a new DM version which has no data at all yet, and create some. I suppose that it will not happen now.
Regards,
Mario

Similar Messages

Duplicate entries / Employee is appearing twice in report (OR more than onc

Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep Jadhav

Hi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma

Workflow appearing twice in SQL

I recently checked up on
workflow performance after an extended parental leave and found that one of the workflows appeared twice in the DB.
The functioning workflow had a watermark being just one or two transactions behind, but the other was behind by what I guess is the time I implemented the workflow (which means several months by now). Both workflows have the same exact ruleid. Funny
thing is the RuleLastModified is only off by around 100 milliseconds.
The stuck workflow has no Relationship type ID nor a Related type ID.
Not sure where to go from here in order to remove this errornous subscription state (except deleting the errornous row).
http://codebeaver.blogspot.dk/

Hi
Not very much sure what are you referring to here.
But based upon the partner function procedure assigned to transaction type you get the list of partner in the ticket
so if you have z transaction type with all partners so you are getting the entire set of partner including z and standard
so decide as per requirement which one you want and then enhance the z partner profile and further assign it to custom transaction type
regards
prakhar

Sqlplus query issue:customerID column appear twice

I have tried in several ways to display a query where shows customer who have made more than 3 rentals from 01Nov to 31 Dec. However, for some reason the customerID column appear twice.
** I'm using 3 tables to get this result:
select RentalAgreement.membershipcardid as "MCardID",
customer.customerid,customer.cname,customer.address,
membershipcard.customerid,invoice.rentc,RentalAgreement.DateAndTimeOfIssue,
count(RentalAgreement.membershipcardid) as "NOfRents" from RentalAgreement,customer,membershipcard,invoice
where rentalAgreement.membershipcardid=MembershipCard.MembershipCardID
and customer.customerid = membershipcard.customerid
and RentalAgreement.DateAndTimeOfIssue between '01-Nov-2012' and '31-Dec-2012'
group by rentalAgreement.membershipcardid,MembershipCard.
customerid,customer.cname,customer.address,invoice.rentc,customer.customerid,RentalAgreement.DateAndTimeOfIssue;
MCardID CUSTOMERID CNAME ADDRES CUSTOMERID RENTC DATEANDTI
NOfRents
107 27 EDuois N151AS 27 60 11-NOV-12
5
108 28 WDuois N151AS 28 60 19-NOV-12
5
101 22 ALuois N193AS 22 60 22-NOV-12
5
MCardID CUSTOMERID CNAME ADDRES CUSTOMERID RENTC DATEANDTI
NOfRents
101 22 ALuois N193AS 22 60 21-NOV-12
5
101 22 ALuois N193AS 22 60 20-NOV-12
5
101 22 ALuois N193AS 22 60 24-NOV-12
5
MCardID CUSTOMERID CNAME ADDRES CUSTOMERID RENTC DATEANDTI
NOfRents
109 30 ADDuis N151AS 30 60 03-DEC-12
5
Thanks for your time.
Im not sure if this query seems to be logic, I would appreciate any online guide for pl/sql

Hi,
978308 wrote:
Hi
Thank you for your answer. (I'm suing Oracle you're using (e.g. 11.2.0.1.0).
sorry my question it wasnt not clear since I didn't attached my tables .
As you suggested It is not necessary to use plsql, I tried to use the logic of algebra and old sql to solve query number 2: /* query No2
produce a list of customers who have made more than three scotter rentals in the past 2 months
show appropiate customer and rental agreement details*/
However, I found many errors maybe because I my class diagram wasnt properly completed, So I decided to used plsql to get the result.
It is true my query is incomplete because first of all I wanted to delete duplicate columns then I will work on number of ocurrences.
If I delete and customer.customerid = membershipcard.customerid , sql will show 500 customers, the repetition is even higher. The condition "customer.customerid = membershipcard.customerid" in the WHERE clause looks right; you don't have to change that part.
The SELECT clause determines what columns appear in the result set. If you only want customerid to appear in one column, then only include one customerid column in the SELECT clause. There need not be any connection between the SELECT clause and the WHERE clause; it's perfectly okay to use a column in the SELECT clause but not the WHERE clause, and it's perfectly okay to use a column in the WHERE clause but not the SELECT clause.
/* query No2
produce a list of customers who have made more than three scotter rentals in the past 2 months
show appropiate customer and rental agreement details*/Once again, please format your code, and use \ tags when you post it here to preserve the spacing. It's hard to read informatted queries like this, and therefore it's hard to debug them.
See the forum FAQ {message:id=9360002}
select RentalAgreement.membershipcardid as "MemberID",
customer.customerid,
customer.cname,
customer.address,
membershipcard.customerid,
RentalAgreement.DateAndTimeOfIssue,
RentalAgreement.EScotterID,
count(RentalAgreement.membershipcardid) as "NumberOfRent"
from RentalAgreement,customer,membershipcard
where rentalAgreement.membershipcardid=MembershipCard.MembershipCardID
and customer.customerid = membershipcard.customerid
and RentalAgreement.DateAndTimeOfIssue between '01-Nov-2012' and '31-Dec-2012'Once again, don't compare a DATE (such as RentalAgreement.DateAndTimeOfIssue) to a VARCHAR2 (such as '01-Nov-2012'). You're using TO_DATE correctly in your INSERT statements; use TO_DATE in the query, too.
group by rentalAgreement.membershipcardid,
MembershipCard.customerid,
customer.cname,customer.address,
RentalAgreement.EScotterID,
customer.customerid,
RentalAgreement.DateAndTimeOfIssue;"GROUP BY a, b, c, d" means that each row of output will represent a distinct combination of columns a, b, c and d, and aggregate functions will operate on the whole group. In the query above, that means count(RentalAgreement.membershipcardid) will show the number of rows that had a value for membershipcardid for each combination of the 6 columns listed in the GROUP BY clause, including custiomerid and dateandtimeofissue. That means that rentals for each customer *and date* will be counted separately. Look at the output you're getting from query 2:Member CUSTOMER CUSTOMER DATEANDTIME ESCOTTER Number
ID ID CNAME ADDRES ID OFISSUE ID OfRent
102 23 BLuois N113AS 23 11-Nov-2012 1 1
101 22 ALuois N193AS 22 21-Nov-2012 1 1
101 22 ALuois N193AS 22 24-Nov-2012 5 1
101 22 ALuois N193AS 22 20-Nov-2012 2 1
101 22 ALuois N193AS 22 22-Nov-2012 4 1
101 22 ALuois N193AS 22 19-Nov-2012 2 1
The count is always 1. That is, customer 22 did have 5 rentals, but only 1 rental per day.
You haven't posted the results you want from the same data. I'm guessing you want something like this:Member CUSTOMER DATEANDTIME ESCOTTER Number
ID ID CNAME ADDRES OFISSUE ID OfRent
101 22 ALuois N193AS 19-Nov-2012 2 5
101 22 ALuois N193AS 20-Nov-2012 2 5
101 22 ALuois N193AS 21-Nov-2012 1 5
101 22 ALuois N193AS 22-Nov-2012 4 5
101 22 ALuois N193AS 24-Nov-2012 5 5
showing that that customer 22 had 5 rentals in the period of interest. That is, you *do* want to combine all rows for a customer when COUNTing, but you *don't* want to combine the rows when displaying. The aggregate GROUP BY combines the rows, so how can you still get the details (such as date and scooter ID) for each separate rental? One way is to do a GROUP BY just to get the customerid and COUNT, and use that in an IN subquery (or maybe a join), where the main query does not use GROUP BY.
If this is a school assignment, I don't want to ruin it for you, so I'll use an example with the scott.dept and emp tables. Say we want to find which departments have mor than 1 CLERK working in them. One way to do that is:SELECT     *
FROM     scott.dept
WHERE     deptno     IN (
          SELECT deptno
          FROM      scott.emp
          WHERE      job     = 'CLERK'
          GROUP BY     deptno
          HAVING     COUNT (*)     > 1
Output:DEPTNO DNAME LOC
20 RESEARCH DALLAS
Another, com pletely different way would be to use the analytic COUNT function, not the aggregate function.

Events appearing twice in iCloud

Hello! I need help about solving an issue with calendar events appearing twice in iCloud and the iOS systems connected. These events are rerlated to the default calendar "calendat". I have not been able to find a solution. Any suggestion?

Hi
Not very much sure what are you referring to here.
But based upon the partner function procedure assigned to transaction type you get the list of partner in the ticket
so if you have z transaction type with all partners so you are getting the entire set of partner including z and standard
so decide as per requirement which one you want and then enhance the z partner profile and further assign it to custom transaction type
regards
prakhar

Peroid appears twice

Hello,
In md61 tcode, same period appears twice (Table Tab).
For Example - M 03.2010 M 03.2010
How to correct this ?
Rgds,
Karthi.

Hi,
I guess that there was a change in the calendar definition, or assignment of a new calendar.
You can't fix it directly, as there's nothing to fix. If there's such a change, then the data that was there before the change is displayed in a separate column, like in your case.
Just to check, go to a new DM version which has no data at all yet, and create some. I suppose that it will not happen now.
Regards,
Mario

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

Same genre appears twice in my iPhone 5s.

Why does the same genre (Alternative) appear twice in my iPhone 5s. Both Genre listings in the phone show the same # of songs and minutes.
What I've done thus far:
1. removed "Alternative" genre from all songs in music library
2. synced iPhone and both Alternative Genre we removed on iPhone under Genres
3. made sure the Genre spelling on all songs is correct and the same in iTunes
4. re-synced iPhone and again both Genres Alternative appear.
Then tried this:
2. connected iPhone to iTunes, went to iTunes / iPnone > settings > music and verified under "Genres" that Alternative only appears once in the Genres section
3. on the iPhone settings > music > insured "Show All Music" was turned off
4. on the iPhone settings > iTunes & App Store insured "Show All" > music was turned off
5. unchecked Sync Music and selected remove all music then synced iPhone, verified all music and all Genres on the iPhone were removed
6. ejected iPhone did a hard reset on iPhone verified both "Alternative" Genres were deleted.
7. connected iPhone to iTunes, went to iTunes / iPnone > settings > music and re-selected Sync Music and synced
8. STILL TWO LISTINGS OF ALTERNATIVE GENRE ON IPHONE AND HAS THE SAME # OF SONGS AND MINUTES.
* note no other Genres have duplicate listings and there are a total of 9 other Genres. Of those 3 are custom names.
Help please...
Thank you in advance.

Is the phone unlocked and available to you? Have you notified your carrier of this change?

Loops appear twice in the loop browser. Huh?

I just installed iLife '06 and have been "messing around" with the various programmes. One thing I noticed was that exactly the same loops appear twice in the loop browser. Not all loops are doubled, which is obviously what is confusing me. Is this normal (not my confusion!!)?
I've checked the folder in the library and each loop is only available once, but GarageBand insists on having two of quite a number of loops. Any tips would be greatly appreciated, as I haven't found any way to delete just one of the loops (deleting the file obviously deletes both . . .)
Thanks in advance,
Steve
G5 Dual 2.3, G4 Powerbook Mac OS X (10.4.3)

Do you really have only one copy of each? Do a Finder/Spotlight search. There are several places where the loops could show up:
- the general Library/Audio folder
- the user Library/Audio folder
- the general Library/Application Support folder
- the User Library/Application Support folder
Did you install over an old version of GB? That might explain the duplicate loops. And the "single" loops that were either part of your old installation and not of GB3 or vice versa.
In order to repair that, you should trash the duplicate loops and the content of the Loops Index folder and then drag the remaining loops into the loop browser.

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?

How can I manage six email accounts WITHOUT them all appearing (twice) in the Folders column?
All I need is ONE INBOX (like Windows Mail used to do) ...
I can see in the 'Account' column of each message which email account it's using.
Then, I either junk or read the message, followed by delete or file to one of my created folders.
As it is, half my page is depth is taken up by 12 lines of Account names !!!

That still leaves SIX lines of Account names down the side. All I want is ONE INBOX ... (I can see which account each message belongs to in the 'Account' column...)

Time Capsule appears twice in Airport drop down menu

Menu Bar > Airport drop-down menu: My Time Capsule's wireless name shows up twice in my list of wifi sources. Once in the group with all the other routers and again in a group called "Devices".
Long story short…
I start with a perfectly functional, WPA/WPA2 password-protected Time Capsule: Over a year old. Two MbP's using it for Time Machine backup. Connected to a 1.5TB MyBook external HD via usb. Doubles as my wifi router. Everything's connected to it, including my wifi-enabled printer. Works great. No issues.
I get this idea in my head that I need to hide my wifi signal. I figure it out and ¡Viola! Hidden. Then I try to add my wifi-enabled printer to the list of allowed devices in "Access Control". I hit a big snag and can't figure out how to get it to connect (btw, don't buy a Brother printer. Pure crap). So, I give up and revert permissions back to visible, password-protected state.
Skipping irrelevant issues that I already resolved, I now have the wireless name of my Time Capsule appearing twice in the airport drop down menu. It appears with all the other wifi sources my machine detects AND appears at the bottom under a new category called "Devices".
All I want is to have things back the way they were and this anomaly in the drop down menu is a constant reminder that I #1 failed and #2 bought a crap printer.
(Long story long, I guess. Sorry.) How do I delete this "Devices" group from the airport drop down menu?

Stilts McCoy wrote:
Menu Bar > Airport drop-down menu: My Time Capsule's wireless name shows up twice in my list of wifi sources. Once in the group with all the other routers and again in a group called "Devices".
You might find useful advice in this thread:
http://discussions.apple.com/message.jspa?messageID=12156248
If you want to post a reply, please do so to this thread, not the other one.

Long text for line item appears twice in my PO form...

Hello Experts,
I am wondering why my long text for my 1st line item is appearing twice. In my PO, I only
maintained a long text for my 1st PO line item appeards twice. below is my code:
/E          ITEM_LINE_1
IZ           &EKPO-EBELP&,,&EKPO-TXZ01&
IZ           ,,&EKPO-EMATN&,,&EKPO-MENGE&,,&EKPO-MEINS&,,&EKPO-UMREZ&,,&EKPO-NETPR&,,
=           &EKPO-NETWR&
/:           DEFINE &LV_TEXTNAME& = ''
/:           PERFORM GET_LONGTEXT_ITEM IN PROGRAM ZMMRP0008
/:           USING &EKPO-EBELN&
/:           USING &EKPO-EBELP&
/:           CHANGING &LV_TEXTNAME&
/:           ENDPERFORM
/:           INCLUDE &LV_TEXTNAME& OBJECT 'EKPO' ID 'F01'
The element 'ITEM_LINE_1' is called per line item. So in my case, 3 times. The INCLUDE statement
at the end of the element is for the longtext. I am now confused as to why it appears twice for the 1st line item.
Thank you guys and take care!

Hi,
You can debug and check whats happening there.
Regards,
Ram

Why report section is appearing twice in the output of report designer

Hi Gurus,
I have created a report in the report designer and my report contains 5 sections.
each report section is one query view.
i inserted all the query views and done some formatting .
but when i executed the report , one of the report section is appearing twice in the output.
ex: i need the output like this
section1
section2
section3
section4
section5
But the output i am getting is as follows.
section1
section2
section3
section3
section4
section5
report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
Thanks in advance.
Raj.

Hi Gurus,
I have created a report in the report designer and my report contains 5 sections.
each report section is one query view.
i inserted all the query views and done some formatting .
but when i executed the report , one of the report section is appearing twice in the output.
ex: i need the output like this
section1
section2
section3
section4
section5
But the output i am getting is as follows.
section1
section2
section3
section3
section4
section5
report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
Thanks in advance.
Raj.

In va01 condition types are appearing twice

Hi
In the pricing conditions screen of sales order I find that all the condition types are appearing twice and also calculted taxes twice.please give me solution

Hi Swapna,
Make Exclusive checkbox in your access sequence in V_T682I.Check your calculation of pricing also.Check there are no of threads on this topic.
Regards,
Madhu.

OutputLabes, values in selectOneChoice are appearing twice in the jspx page

Hi All,
In a Jspx Page, there are two menu tabs. Each Tab has a PanelForm and each panelform has certain components.
By default the first panelform in the first tab will be shown on page load and while clicking on second tab, the second panelform will be shown.
The first panelform has three selectonechoices and three command buttons.
If i click on reset button, these 3 selectonechoices are set to null by backing bean.
Here comes the problem, after clicking on reset, if you click on second tab where the second panel form available, certain components like outputLabel and the values in selectOnechoice, are appearing twice on the page.
Can anyone suggest me how to get rid of this problem..
Here is my Jspx Page..
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces"
xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:loadBundle basename="GeneralAdmin" var="gadmin"/>
<f:loadBundle basename="HoldCapabilites" var="holdc"/>
<f:view>
<afh:html>
<afh:head title="editManualProfileAttributes">
<meta http-equiv="Content-Type"
content="text/html; charset=windows-1252"/>
<script type="text/javascript">
function cancel() {
var flag = false;
flag=window.confirm('You want to discard the entered data');
return flag;
</script>
</afh:head>
<afh:body>
<af:messages/>
<h:form>
<afh:tableLayout>
<afh:rowLayout width="100%">
<jsp:include page="/jsps/webutils/template/header.jsp"/>
</afh:rowLayout>
<afh:rowLayout>
<afh:rowLayout width="100%">
<af:menuPath>
<af:commandMenuItem text="#{gadmin.admin}" action="adminHome"/>
<af:commandMenuItem text="#{gadmin.epaAttr}" selected="true"/>
</af:menuPath>
</afh:rowLayout>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout halign="center" valign="bottom">
<afh:cellFormat width="20%" height="20px" valign="bottom">
<af:menuTabs>
<af:commandMenuItem text="#{gadmin.epAttr}"
action="#{EditManualProfileAttributes.firstTab}"
binding="#{EditManualProfileAttributes.commandMenuItem2}"
id="commandMenuItem2"/>
<af:commandMenuItem text="#{gadmin.auditHistory}"
action="#{EditManualProfileAttributes.secondTab}"
binding="#{EditManualProfileAttributes.commandMenuItem1}"
id="commandMenuItem1"/>
</af:menuTabs>
</afh:cellFormat>
<afh:cellFormat styleClass="bottomLine" width="80%"
height="20px" valign="bottom">
<af:objectSpacer height="1" width="1"/>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="100%" height="10"/>
</afh:rowLayout>
<af:panelForm id="panelForm1" width="100%"
binding="#{EditManualProfileAttributes.panelForm1}">
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.mpAttr}"
inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<f:verbatim>
<hr align="left"
style="border-width:2.0px; color:rgb(219,238,243);"/>
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.refName}"
styleClass="outputText"/>
<af:outputText value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="80%">
<af:selectOneChoice id="navList1" autoSubmit="true" partialTriggers="commandButton2"
valuePassThru="true" unselectedLabel="Select"
binding="#{EditManualProfileAttributes.navList1}"
valueChangeListener="#{EditManualProfileAttributes.getDetails}">
<af:forEach var="li"
items="#{bindings.GetRefNamesVO1.rangeSet}">
<af:selectItem label="#{li.ReferenceName}"
value="#{li.Id}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.refId}"
styleClass="outputText"/>
<af:outputText value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="15%">
<af:selectOneChoice id="navList2" autoSubmit="true"
partialTriggers="navList1 commandButton2"
binding="#{EditManualProfileAttributes.navList2}"
valueChangeListener="#{EditManualProfileAttributes.getColumns}">
<af:forEach var="li"
items="#{bindings.LookupRefTableVO1.rangeSet}">
<af:selectItem label="#{li.LookupDesc}"
value="#{li.LookupId}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
<afh:cellFormat width="15%">
<af:selectOneChoice id="navList3"
binding="#{EditManualProfileAttributes.navList3}"
partialTriggers="navList1 navList2 commandButton2">
<af:forEach var="li"
items="#{bindings.EditRefColumnVO1.rangeSet}">
<af:selectItem label="#{li.DetailDesc}"
value="#{li.DetailsId}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
<afh:cellFormat width="50%"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="6%">
<af:outputText value="#{gadmin.stDt}"
styleClass="outputText" id="outputText1"
binding="#{EditManualProfileAttributes.outputText1}"/>
</afh:cellFormat>
<afh:cellFormat halign="left">
<af:outputText value=" * " id="outputText2"
binding="#{EditManualProfileAttributes.outputText2}"
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="4%"/>
<afh:cellFormat width="80%">
<af:selectInputDate id="startDate"
binding="#{EditManualProfileAttributes.startDate}"
partialTriggers="navList1 commandButton1 commandButton2">
<af:convertDateTime pattern="dd/MMM/yy"/>
</af:selectInputDate>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="5%"/>
<afh:cellFormat width="15%">
<af:outputText value="#{gadmin.edDt}"
styleClass="outputText" id="outputText3"
binding="#{EditManualProfileAttributes.outputText3}"/>
</afh:cellFormat>
<afh:cellFormat width="80%">
<af:selectInputDate id="endDate"
binding="#{EditManualProfileAttributes.endDate}"
partialTriggers="navList1 commandButton1 commandButton2">
<af:convertDateTime pattern="dd/MMM/yy"/>
</af:selectInputDate>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="10"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="20%"/>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.save}"
action="#{EditManualProfileAttributes.save}"
id="commandButton1"
binding="#{EditManualProfileAttributes.commandButton1}"/>
</afh:cellFormat>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.reset}"
action="#{EditManualProfileAttributes.reset}"
id="commandButton2"
binding="#{EditManualProfileAttributes.commandButton2}"/>
</afh:cellFormat>
<afh:cellFormat width="7%">
<af:commandButton text="#{gadmin.cancel}"
id="commandButton3"
binding="#{EditManualProfileAttributes.commandButton3}"
action="adminHome"
onclick="return cancel()"/>
</afh:cellFormat>
<afh:cellFormat width="59%"/>
</afh:rowLayout>
</af:panelForm>
<af:panelForm id="panelForm2" rendered="false" width="100%"
binding="#{EditManualProfileAttributes.panelForm2}">
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputLabel value="#{holdc.mpaAttr}" id="abc"
inlineStyle="font-family:Arial; font-size:9.0pt; font-weight:bold;"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<f:verbatim>
<hr align="left"
style="border-width:2.0px; color:rgb(219,238,243);"/>
</f:verbatim>
</afh:cellFormat>
</afh:rowLayout>
<afh:rowLayout width="100%">
<af:objectSpacer width="10" height="20"/>
</afh:rowLayout>
<afh:rowLayout width="100%">
<afh:cellFormat width="15%">
<af:outputLabel value="#{holdc.refeName}"
styleClass="outputText"/>
<af:outputLabel value=" * "
inlineStyle="font-size:10.0pt; font-family:Arial; color:rgb(255,0,0);"/>
</afh:cellFormat>
<afh:cellFormat width="85%">
<af:selectOneChoice id="navList4" autoSubmit="true"
unselectedLabel="Select"
valuePassThru="true"
binding="#{EditManualProfileAttributes.navList4}"
valueChangeListener="#{EditManualProfileAttributes.getVersions}">
<af:forEach var="li"
items="#{bindings.AuditRefNamesVO1.rangeSet}">
<af:selectItem label="#{li.ReferenceName}"
value="#{li.Id}"/>
</af:forEach>
</af:selectOneChoice>
</afh:cellFormat>
</afh:rowLayout>
</af:panelForm>
</afh:tableLayout>
</h:form>
</afh:body>
</afh:html>
</f:view>
</jsp:root>

Hi Puthanampatti,
Thanks a lot for your reply, but i am using JDev 10.1.3.3. There is no panelFormLayout component and i am not using that component.
Even i am strange this duplicating of components and values in selectoneChoice occuring from past 2 days in the old file. I am wondering whether my file got corrupted by any sort.
Regards,
R N V Prasad

Assignment appears twice.

Similar Messages

Maybe you are looking for