Assignment: Business partner for person '50000029' is not unique

HI,
In the past, whenever I use to create the employee using Tcode PA40, the corresponding Business Partner (BP) used to get created.
But now when I create the employee, BP does not gets created.
I checked using the program "HR_SYNC_PERSON" and found that whenever I select the employee option and execute it gives the following error(whenever I select the employee option and execute):
Assignment: Business partner for person '50000029' is not unique
Can you please help!
Regards
Manish

Oh, I understand. Earlier I misunderstood your statement.
So the CP is 50000029. Regardless, the point is still the same. SAP tried generating a BP to tie to CP 50000029. Your system HAS configured a BP number range. Whatever the next value of your number range is, seems like is already being used.
Go to the BP number range config and look at the next value. Look in transaction BP and enter that BP and see if you get any hits. My guess is that you will. You'll likely need to end up changing your business partner number range. You won't get unique violations for different OTYPE values.
What's your existing BP number range next value? What happens when you search for that value in transaction BP?

Similar Messages

How to Assign Business partner for Vendor Organisation

Hi,
We are in SRM upgrade from SRM 3.0 to SRM 7.0.
For Vendor organisation say 0 50002381 there is no Business partner assigned.
Under this organisation there are 200 vendors .
When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
it is showing an error -No partner assigned
How to assign the Business partner for the organisation .
Please give your inputs
Regards
G.Ganesh Kumar

Hi Muthu,
Thanks for the reply
Already the SAP NOTES : 1372409 is applied.
I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
" Check mode 9: :Invalid Object on supplier node"
How to resolve this issue.
Already one more thread is open for this issue
Regards
G.Ganesh Kumar

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

To assign business partner no. to central person

Hi
We are pulling org. structure form HR to SRM system. We are mainating the same central person as well as positon from HR system. But one of the central perosn in SRM is missing the business paterner due to which when I run BBP_BP_OM_INTEGRATE we get an error business partner no unique, I repaired the user I did not work. How to assign business partner to CP.
We are SRM5.0 ECS
with regards
Manjuanth
Message was edited by:
Manjunath Somashekara

Hi
Please try this ->
1.
Go to Web Transaction "Manage Business Partner". (BBPMAININT)
There are several options - go for "Employee for Business Partner" and enter in the field the supplier number or search for the supplier you want to create an employee for. Hit create and fill out the screen. The upper part of the screen creates the employee, in the lower part the user id (with which you logon) is maintained. The structure of the screen is asking all relevant elements needed to create a full SRM users and integrates the account into the Org Model.
For the central Org Unit for Bidders enter the Node Number for the Vendor Root.
How to assign contact person user id to Vendor uploaded from ECC?
OR
2. You need to go into Transaction BP, select the BP for whom you want to change their roles. Click on the change button and then you can select from the drop down field "Change in BP Role" the role that you need for that BP.
Business Partner
Other releated helpful links ->
Re: Central Person already exists
Re: regarding business partner, central person and organizational unit relation
Central Person and BP ID
How to delete Central Person?
Regards
- Atul

Error TTB1: You have not assigned business partner B1000 to a customer

Hi,
When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
Any recommandations on this? The BP functionality has never been used befor by my customer.
Thanks in advance, and this a week befor possible go live...
Hans.

Update in PS was needed...

Business Partner with ID GUID is not an employee - HR Replication

Hi All,
We are on SRM 5.0 Server 5.5. Our SRM Org structure comes from R/3. We did an initial replication and everything worked. I am now manually trying to replicate selected positions and persons, and this is not working properly.
The position and person comes across however in PPOSA_BBP the central person is not automatically linked to the position. When I run HRALXSYNC on the CP, I get an error "Business Partner with ID <GUID> is not an employee". I have checked the BP and it is an employee; in transaction PP01 there is an Org. assignment (0001) to the position and org unit. I have checked the IDOCs and the relationship A008 seems to be coming across.
Does anyone have any suggestions as to what else I can check?
Thanks,
Paula.

Hi
Please go through this ->
The CP object is a technical object and represents the natural person. The CP is not transferred in the scenario "SRM standalone with ALE integration of an HR system". This means that the CP in the HR system and the CP in SRM systems are different objects. The number of the CPs in the SRM system in this case is not significant, but when the CP is created, the system tries to assign the number of the first personal number (contract) to the object.
See related SAP OSS Notes, which will definitely help ->
Note 920185 - SRM 5.0: No CP<->BP consistence check in BBP_BP_OM_INTEGRATE
Note 763403 Assign existing (SU01) users to (ext.) employees
Note 875015 No attributes found for service agent
Note 309909 - R/3 HR connection: Link user / position
Note 1046808 - Business partner validation
Note 934372 - SRM/CRM: HR integration for business partner - new features
Also see this ->
During the business partner replication from purchasing systems to SUS, the following error occurs in an XI interface: "An exception has occured. E:R11: 124 - Business partner with GUID &1 does not exist"
Note 726212 - SRM40-SUS: Business partner - correction for SP00
Related Notes
Note 922181 - SRM-SUS: Mail notification not send from 'BBP_SUS_BP_ADM'
Note 849217 - SUS-MM: Vendor replication leads to error
Do let me know.
Regards
- Atul

Business partner of organizational unit is not consistent

Hi,
Client is on SRM 4.0. When we are trying to search a user in the org structure, and when clicking on "Check" for this user, it was showing fine. But when we are searching any BP in the org strucutre, then immediately the BP name is vanishing against the BP of the user and when doing the "Check" it is showing the below two messages:
Business Partner of organizational unit XXXXXXX is not consistent
User cannot be repaired becasue the organizational unit contains errors
When checking in BBP_CHECK_USRES, the user is not showing as defective. It is green.
Similarly, the the organizational unit check is also showing as green.
System is advising to run BBP_BP_OM_INTEGRATE. When we run this for the org units, these are coming as green.
Users are able to create the shopping carts and also are able to create confirmations. But the problem is happening for some of the users where the system is not allowing to create shopping basket / confirmation.
Strange thing is that, when we are searching the user by user id in the org structure, then the check is showing no messages. But if we search the same user using the BP number, then in the check, the messages are coming. And once the messages appear, it is appearing for all the users in the org strucutre even at the root node level.
Any help is highly appreciated.
Thanks & Regards,
Aswini

Hi Aswini,
There are some possibilities to raise these kind of errors messages:
1) User with inconsistent data.
Please, check the instructions described in the following notes:
597475 - Repair users with inconsistent address data
-> use the report B_REPAIR_EBP_USER_2 to make the user consistent.
419423 - Repairing incorrect EBP users
350129 - Creating business partner for organizational unit
When you create the Org Units have you fully completed the address
data, e.g post coe, telephone/fax number etc..
If not, please enter a full address, save the data and see if this
generates the Business Partner.
Remember, that you can delete this user and create a new user.
2) Error in the positions after HR replication
Please, implement the following notes and retest the scenario:
1056873 - Incorrect SRM users after HR distribution
1016450 - Replication of persons deletes positions in SRM
After implementing these notes you should send the employee
corresponsing to the user in error with his position (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods.
3) the user was deleted and a new was created and during these two
actions the user opened documents. So, in this case, the new user
becomes inconsistent
If the user is deleted from SU01 still the BP and S which is related to
that user will be retained (we can see this in PPOMA_BBP) transaction.
In this case we can create the user again using SU01 and can be attached
with the old 'S' and 'BP'.
2. If the user is completed deleted ie., all relations BP and S.
The new user has created.
In this case if the new user is corrupted we can delete this
user (since the new user doesn't create any documents so far). But the
old documents should refer to the new BP related to the new user.
========================
Also, another option would be to follow the below instructions
After applying the notes 1056873 & 1016450, send the employees
corresponding to the users in errors with their positions (using
transaction PFAL or report RHALEINI in UPDATE mode for all periods,
using evaluation path A008) ? If not, please do this and it must repair
the SRM users. Please test and give me the feedback.
Hope this helps,
Kind Regards,
Matthew

Create business partner for existing employee for SAP version 4.7

Hi all !
Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
I have look in OSS and SAP forum but I have not found.
Our company need to create business partner for all existing employee but for our SAP 4.7 version.
Thanks
Hugo Nguyen

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41                     Create Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Transaction Code - MM42                     Change Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Rewards if useful.........
Minal

Search help (PREM) for personal no. is not coming in ALV grid table control

hi experts,
Search help (PREM) for personal no. is not coming in ALV grid table control.
i have assigned the srch help (prem) to my 'ZFIEXP_PROJALLOC' table for the emp_id.
but in output it is now showing the help.
ls_fcat-fieldname = 'EMPLOYEE CODE'.
ls_fcat-ref_table = 'ZFIEXP_PROJALLOC'.
ls_fcat-ref_field = 'EMP_ID'.
ls_fcat-outputlen = '10'.
ls_fcat-key = 'X'.
ls_fcat-edit = 'X'.
ls_fcat-coltext = 'EMPLOYEE CODE'.
ls_fcat-seltext = 'EMPLOYEE CODE'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
Then i tried to solve it using the PA0002 . ie.,
ls_fcat-fieldname = 'EMPLOYEE CODE'.
ls_fcat-ref_table = 'PA0002'.
ls_fcat-ref_field = 'PERNR'.
ls_fcat-outputlen = '10'.
ls_fcat-key = 'X'.
ls_fcat-edit = 'X'.
ls_fcat-coltext = 'EMPLOYEE CODE'.
ls_fcat-seltext = 'EMPLOYEE CODE'.
append ls_fcat to pt_fieldcat.
clear ls_fcat.
with this it is showing the help in employee code, but, when i click on an empl number, it is not added to my table control and allowing me to add the number by typing them.
plz help me.
thanks.

Hi
In the layout give layout-sel_mode = 'A'. and
pass 'A' to i_save exporting parameter to method set_table_for_first_display.
The same thing if you are working with function module
reuse_alv_grid_display.
Reward points for useful answer.
Venkat

Maintain Reference Business Partner for Consumers

hi all,
i have Maintain Reference Business Partner for Consumers through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i can...please show me how ? i read once i mantain ..i can not change it , is that true ?
best regards
indah puspita

Hi Indah,
If you are using version 5.0 try this,
Start Transaction SE37. Create function module CRM_BUPA_CONSUMER_ADD_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes ( added sales area) to all consumers". Define the following import parameters:
Parameter Name: IV_MAX_BLOCK_SIZE
Type specification: TYPE
Associated Type: I
Default value: 100
Optional: X
Define the following table parameters:
Parameter Name: IT_SALES_AREA
Type specification: LIKE
Associated type: BAPIBUS1006_SALES_AREA
Parameter Name: ET_RETURN
Type specification: LIKE
Associated type: BAPIRET2
Optional: X
Save the changes.
Create function module CRM_BUPA_CONSUMER_CHANGE_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes of a sales area to all consumers". Define the same parameters as for the above function module.
save changes.
Create report CRM_BUPA_REF_BP_ADAPT_CHANGES in package CRM_BUPA with Transaction SE38.
Title: "Distribution of changes to reference business partner"
Type: 1
Status: P
Package: CRM_BUPA
Save the changes.
Use Transaction SE38 to open report CRM_BUPA_REF_BP_ADAPT_CHANGES and maintain the following text symbols (menu: Goto -> Text elements -> Text symbols):
For CRM Release 5.0, define additionally:
010 Sales organization 20   50
011 Distribution channel 12   50
012 Line of business 6    50
On the "Selection texts" tab page (menu path "Goto -> Text elements -> Selection texts"), maintain the following texts for the variables already defined:
Name: GV_P1
Text: New sales area
Name: GV_P2
Text: Changes to sales area
Save and activate all changes.
check the OSS notes 1014356 if the problem still persists.
reward with points.
cheers,
MARK

Business partner -Central Person

Hi,
Please canyou know let me know if there is any relationship between person and business partner -central person
Regards,
Amit

Hi,
The Business partner and the central person gets created automatically when you hire an employee.This is captured in HRP1001. further you can create a business partner using transaction BP
Regards,
Prasad

BAPI for Assigning Business Partner Collection Profile

Hi,
Is there any BADIs for assigning collection profile for Business Partner?
Thanks.
Updates:
Found it. UDM_BP_PROFILE_C
Edited by: Isagani Laude on Oct 2, 2008 10:25 AM

Hi Ravish,
BAPI_BUPA_CREATE_FROM_DATA which generates a general Business Partner. BAPI_BUPA_ROLE_ADD. to add a different role
Regards
Narayana

How to calculate age for a business partner for segmentation purposes?

How do I calculate the age of a BP based on this person's maintained birthday on BP master data? I need to use this information to segment based on age groups, eg age 30-40, age 25 and below etc.
I did quite a bit of search on this forum but couldn't find anything. I know I've seen them somewhere before. Would appreciate any help and will reward points. Thanks!

Hi Jo,
You can achieve this by using infosets.
Create Infoset using direct read of table BUT000.
In infoset select extras for additional field button and give following code for calcualting the difference between Birthdate and system date.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
      i_date_from          = but000-BIRTHDT
      I_KEY_DAY_FROM       =
      i_date_to            = sy-datum
        I_KEY_DAY_TO         =
        I_FLG_SEPARATE       = ' '
   IMPORTING
     e_days               = test
        E_MONTHS             =
        E_YEARS              =
Create a datasource with Business partner GUID and assign it attributelist.
Choose the additional field for filter criteria.
Hope it solves your problem.
Reward points if it helps.
Regards,
Madhu

No Business Partner name in the general note of a DSWP-issue

End user has been created within a CUA-sytem and distributed to the SSM-system. Subsequently the Business Partner BP has been generated in the SSM-system succesfully with the tcode bp_gen. The BP has been attached in the organization model succesfully using tcode pposa_crm. However, the Holder name does not appear at the left lower Holder column. After some investigation it appears that the fields HRP1000-SHORT and HRP1000-STEXT of the Central Person are not filled. Hence, no Business Partner name appears in the general note of DSWP-issue and therefore different to trace who has done what. What can be the cause of this issue?

Just for the record...
It appears that in some cases the Title-field was not filled in the CUA-system. Therefore this field was not transferred to the SAP Solution Manager system. The problem has been solved by entering a value in the 'Title'-field of the Business Partner [/nbp] - the Holder name in the organisational unit appears again.

Organization Assignement - Business Partner

Hello Experts,
I've downloaded org structure from ECC to CRM. When I go to BP to assign the Oranization I'm able to see only the sales Organizations which are downloaded from ECC. But not able to see the sales organization which are created in CRM.
Can any one please let me know what needs to be done to be able to see the sales organizations created in CRM.
Regards
Vinod

Hi Vinod,
I think buffering CRM sales areas might help you.
In CRM the sales areas are represented in the organizational model, this means they are not physically stored, but they are the result of the different combinations of sales organizations, sales offices, sales groups, channels and divisions maintained in the organizational model.
Whenever a CRM transaction or a business partner needs the sales areas, they are calculated, and this is an expensive process. To speed up this process, the sales areas are buffered.
Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
1. Go to Tcode : OOATTRCUST
2. Select the structure node Scenarios.
3. Flag the field in the column Buffering for the scenario SALE.
4. Choose Save (Ctrl+S).
Then run the report in Tcode: sa38
1. Tcode: sa38
2. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
3. Flag the fields Delete All Buffers and Restructure Buffer on (Date).
4. Choose Execute (F8).
In Note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
Hope this helps!
Regards,
Chethan

Assignment: Business partner for person '50000029' is not unique

Similar Messages

Maybe you are looking for