Assignment of activity type to person number

Hi All,
Are we maintaining the activity type somewhere in employee master or anywhere which is related to employee master.
where,
Activity type is the defined in SAP-Controlling module. This contains the per hour rate for internal work. e.g maintenance work.
Sundar

Hi,
You  can maintain the activity type for a personnel number  in Infotype 0315-Time sheet defaults.
Regards
Raviiiiiiiiiiii

Similar Messages

  • Assignment of activity types to centers

    Hi
    where can i assign particular activity type to a cost center
    Thanks in advance

    See Guys
    Cost Center and Activity Types Relationship:
    Normally Activities are assigned to Work Center.  In this Work Center u have to maticoned Cost Cetner at Costing Tab in Work Cetner.  So Here is the link with the Cost Center and the Activity
    Previously mentioned In KP26 is the link, but it was on planning side only and it was not mandatory.
    Regards
    raj

  • Cost center assignment to Activity Type

    Hi,
    How to assign Cost Center to Activity type ?
    Thanks
    Prakash.B

    Prakash,
    You may create an activity type by using the transaction KL01.
    This defines the activity. Now you have to have a rate (per hour) defined for this activity. Additionally you have to maintain the cost center which will bear the expenses of this activity.
    So ,
    (1)Use KL01 to create an activity type
    (2)Determine with your CO team which cost center(G/L Account) should be allocated ?
    (3)Determine with your CO team what the rate/hr should be for this activity type?
    (4)Use KP26 to assign the activity type to cost center and also assign the rate.
    Thanks,
    KF

  • Assignment of Activity Types to Cost Centre

    hi,
      i am  creating a work centre and for costing purposes i need to give the activity type and the cost centre.
      even though i have defined an activity type and in it used an allocation cost element which in term is assigned to a cost centre,in the work centre when i search for the activity type the system shows an error.....No activity types assigned to cost center X, controlling area Y on 07.02.2007 where X and Y are variables ofcourse.
      what could be the possible reason?
      thanks and regards
    shekhar

    Hi shekhar,
    Check using KL02 or KL03 again, especially the validity dates of the activity type and may be the coster center KS02, KS03 as well.  I hope, that controlling area is fine.
    There must be some settings wrong, ...
    Please reward, wenn it is useful.
    Kind regards,
    Zhenbo

  • Assignment of default activity type to individual person

    Hi All,
    I have following scenario.
    One maintenance order is created with one operation. Three persons are assigned to the same operation. All these three persons are having different per hour rate and so having different activity types.
    I have mentioned all these 3 activity types in assigned workcenter.
    But while executing in maintenance order I can assign only one activity type in operation tab and so the same is appearing during time confirmation as default.
    I need respective activity types to be appeared by default for each of persons. How can be achived this?
    Sundar

    Hi,
    As 3 different activity types are having 3 different per hour rate, it would better to define sub operations based on the activity type & assign the activity types separately for each sub operations.
    Regards,
    Maheswaran.

  • Error saying "Enter the sender activity type also"

    While trying to upload the HR details from NON SAP to SAP through SE38, an error reflects asking to enter the sender activity type.
    Can any body help me.

    Hi,
    Please refer to the online documentation help whose link is listed below :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c3/c6c2a40f4f11d2956400a0c930669b/content.htm
    This link mentions four different data entry scenarios that can be configured for data entry profile in CATS.
    if you want to have the activity transfered to HR, you have to activate this Controlling object for pers. cost assignment in your
    customizing:
    - Personnel Time Management
      - Time Data Recording and Administration
        - Integrating Time Management with Other R/3 Applications
          - Recording Personnel Costs
            - Enter Controlling objs permitted for pers. cost assignment
    here you can find in the documentation:
    'In this step, you specify which Cost Allocation or Funds Management  objects the personnel costs can be assigned to.
      and, in addition, for account assignment to activity type:
      COBL-LSTAR Activity type
       In cac1 'cost accounting variant' is set to 'Assignment of personnel costs to master cost center'. In this case, the cost center is not transferred to HR. Activity allocation is done directly from cats through the other (non-hr) components. Check for 'activity allocation' in the online documentation.
    the cost assignment variant 'B' (Assignment of personal costs to sender) needs a receiving accounting object.
    If there is no receiving object the cost assignment variant changes to '0'.
    regards
    Waman

  • Activity type to Value categories

    Dear Experts,
    Can you please tell me how to assign the Activity type ( like Labor hour  )  to Value categories.
    AR.

    Hi Amit,
    Actually activity type is not directly assigned to value categories.
    We maintain the value categories in SPRO & cost elements are assigned to value categories.
    CO person created the activity type & herein mentions cost elements too.
    Further activity types are entered in work center master data and thus it appears in maintenance order.
    Sundar

  • Account assignment to insp type

    Hi, as i understand we need to assign the account assignement in insp lot to create qm order against each insp lot generated. please advise where is that setting in spro and what is the path / t-code to do so?

    Hii Raju,
    Auto generation / manual gen of QM order depends on which order type u use. If u want automatic generation of QM Order then u go for Individual QM order with order type QL02 where one Insp lot assigend to order. For auto generation of QM order, u need to activate Individual QM order in the material master which craetes order based on the material & Insp type. u hv to define ur order in Spro>Qm>Quality inspection --> Maintain Inspection type. for each inspection type.
    To create Individaul QM order, cost center to be specified in P.O else general QM order assigns instead.Moreover u need to define activty type and assign the activity type & cost center  to ur QM work center.

  • Activity type in workcenter

    Hi PP experts,
    I have created the activity type and assigned it to work center. While saving it is showing the following error
    Error: "You are attempting to assign the activity type to the workcenter, However this activity type is not been set up in controlling area for the cost center"
    Please help me on this regard
    Samarth

    Dear Mr.Samarth,
    Try with this T codes.
    KS01,KS02 - Create & Change Cost centre Respectively.
    KL01,KL02 - Create & Change Activity Type.
    KP26 - Activity Output/Prices.
    In CR01 while creating a work centre,you will be assigning a cost centre and activity types defined & valid for that cost centre.
    Hope it will solve your issue.
    Regards,
    R.Brahmankar

  • How to Create New Activity Type  for Assiged to work centre Costing in Acti

    Dear Sir,
    We have four activity type to assigned in workcentre Costing Activity. Details are as under
    AIRJET     2010     AIRJET
    DONIER     2010     DORNIER
    SULTEX     2010     SULTEX
    SULZER     2010     SULZER
    in addition one more loom is comming in our unit and require new activity type.
    How can i create new.
    Please guide.
    Thanks in advance
    Regards
    Ajit

    Dear ,
    To create new Activity Type  , you need to follow the below steps :
    KA01 - Create Primary Cost Element for the new activities type.
    KL01 - Create Activity Type tied to the primary cost element. 
    KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
    Assign the activity type to cost center using T code KP26.
    In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
    Click on Overview tab on top and key in costing details in this screen.
    After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
    At work centre level , you should have
    1.Create Standrad Value Key -OP19 and Formula Key in OP49.
    2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
    3.In CR02-Assing the Standard value key in Basic Data  and select the Formula Key in Costing tab with cost centre assingement .Save
    Try and check
    Regards
    JH

  • Activity Type at cost center

    Hi All,
    Is Activity types are used only at production cost centers or u can use for any material use in general, i mean, Say i ahve 2 machinerys, i spend bearings and oil for repairs, i called this activity as antifriction. i issue bearings and oil towards this activty to machinery cost center. now i want a report like how much cost i spend on antifriction activity for machine 1 & 2. How should i map my cost ceners to get this report. Can any body tell me what exactly activty types used for?
    Thanks in advance
    Sarayu.

    Hi
    Activity types classify the activities produced in the cost centers within a controlling area. To plan and allocate the activities, the system records quantities that are measured in activity units. Activity quantities are valuated using a price (allocation price).
    In Overhead Cost Controlling, costs based on the activity type are posted separately in fixed and variable portions. When you divide the activities of a cost center into activity types, you should consider whether the costs can be allocated effectively to the activity types.
    You can plan, allocate, and control costs either at the activity type level of a cost center, or at the cost center level.
    You can also assign the activity type of a cost center directly example: deprecitation postings.
    You can assign one activity type, multiple activity types, or no activity types to a cost center.
    I hope this helps.
    Regards
    Kavitha

  • CO substitution for sender activity type

    Is it possible to substitute the sender activity type during a KB21N activity allocation?  I attempted to do this at the line item level (callup point 1) by changing field COBL-LSTAR but the substitution was not reflected in the controlling document.  I later found note 392273 which states that this isn't possible at the line item level...  "In activity allocation (KB21, KB21N) or in the reposting of an activity allocation (KB65), the system prevents a substitution of the sender."
    Is there another way to substitute the sender activity type?
    Thanks
    Jeff

    Hi,
    For booking of time sheet through CATS, it requires mandatory fields.
    Cost center
    Activity type
    CO object(internal order, n/w or activity, WBS, SO, Cost center)
    For booking the time sheet through CATS:-
    - rates should be maintained in cost center w.r.t activity type.
    - personnel number with the responsible cost center.
    - data entry profile.
    Also whenever we are booking the time sheet, we are booking the hours against some of the activity performed in business such as project management, erection, commisioning etc. So that we can check the cost on the project related to various business activity.
    Thanks & regards,
    KK

  • Flow of Activity Type in Cost Estimate

    Hi
    I have made all the required settings for product costing, I have also maintained values in KP26 for activity postings, but not able to get the flow in Cost estimate.
    Can any body let me know the reasons why i am not able to get the activity postings in cost estimate.
    Thanks
    Rakesh Shah

    Dear Elza,
    Thanks for the quick reply, I have checked the settings suggested by you, and both the settings are in place,
    1. I have assigned the secondary cost element in (Assignment Cost component - cost element with category 43, the same being assigned in Activity type also)
    2. My scenario is Repetitive manufacturing so i have assigned in Qty structure control - routing selection 02 (rate routing).
    Please suggest.
    Thanks
    Rakesh Shah

  • Activity type int processing activity

    Dear All
    I have creat activity type & assign this activity type to work center in "ActTypeProc." IN KP26 , i maintain activity price & all other things but when i maintain this activity type &  work center in WBS for respective internal activity system not shown me plan cost as well as when i confirm the activity system not shown me actual cost also. Pl gave some input on this
    Regards

    Hi nivruti,
    check ur work center whether u have put formula sap008 in other formula in capacity tab page. in schedulling tab page formula sap004 . check whether in costing tab page ur entries are correct regarding activity type and cost center.
    In activity type put * in cctr catagory , activity type catagory 1, give secondary cost element (this can b a reason of ur problem) in allocation cost element.
    Apart from this also check costing variant whether actual and planned has been maintained properly or not.
    Regards
    Abhishek Sinha
    Idhasoft, India

  • Costing for activity types in CS

    Dear All
    Hope you all are doing well.I want to perform costing on service order based on activity type for Customer Services. These activities should be assigned to service material. How can activities assign to service materail? Currently I have configured  valuation catagories , assign cost elements to value catagories, define activity types,Price planning for activity type and assign these activity types to work center.
    Your immedite response is higly appreciable
    Thank you,
    Nomi

    Dear All
    Really sorry for late reply! DIP Profile helps a lot in Configuring Quotation and Billing document. What I did was
    1. I create activities with the help of CO consultant and give price to the activities type.
    2. Setting performed for DISPLAY OF COST in Maintenance and Service       ProcessingBasic settings for these activities.
    3. Assign Cost element for these activities. 
    4. Assign these activities type to the work center.
    5. Define Services Materials for each activity type so that they can be displayed in my quotation and billing document.
    6. Assign services materials to DIP Profile as such:
    u2022     Define planned cost u2013 Total Record as source.
    u2022     In Material Determination for profile I assign each of my service material to Transfer cost and Quantity and assign respective cost and revenue element of that activity type to the Service material.
    When I create a service order with revenue u201CSM02u201D.I do not specify service material. I assign my activities types in operations and when I calculate costing it sums up all the revenue in costing for planned costs but when I create quotation and billing document for the service order it shows individual material for each activity type and its amount on item data and total is displayed in header data against EK01 condition type moreover planned and actual cost are displayed in service order.
    The problem is, I have not create any condition record nor assign these condition type to my pricing procedure as value is arising from activity type.
    Which condition types can be assigned to pricing procedure so that they can pick up the value of the activity type?
    Thank you
    Nomi

Maybe you are looking for