Assignment of Asset Number to non-capex item

Hi Gurus,
Is it possible in the SAP to have assignment of asset number for non-capitalized asset thru manual asset numbering without affecting other reports.
Thanks,
Ellicec

Hi Ajay,
For capitalized asset, we will use internal number assignment where the system will automatically generate an asset number for every asset created in the master data.
For non-capitalized asset, we will use external number assignment where the user will input the desired asset number.
Kindly advise if this is possible.
Thanks,
Ellicec

Similar Messages

  • Vendor part number for non catalog item in shopping cart?

    I have a requirement to get the vendor part number field in shopping cart basic data for non catalog item. This field is available for catalog items, would it be possible to make the same field available for non catalog items as well?

    Hi Gummadi,
    You can create custom fields in Shopping cart uisng a BADI and can populate the information.
    BBP_CUF_BADI can be used to create customer fields.
    Please get discuss with your ABAP fellow for the creation of customer field.
    Award points for helpful answers.
    Rgds,
    Teja

  • Asset number at the line item level

    Hello,
    to a recent client I have 2 depreciation areas - the first one is the statutory one and the second one is for the group. I have different accounts for each depreciation area and at the level of the first one the accounts are asset reconciliation accounts and for the second one the accounts are GL accounts.
    All the postings (depreciation, retirements) are made correctly in both depreciation areas except the fact that at the level of the second depreciation area (with GL accounts) the asset number is missing at the line item level.The field status group is the same for the accounts involved.
    Please, can somebody advice?
    Thank you very much,
    Claudiu

    Hi Mark,
    thanks for answering me and trying to help me. Regarding your questions - the posting on the second GL account are line by line, this landscape don't work with group of assets. This field ANLN1 is empty for this depreciation area, like I said the values are correct in asset explorer but in Fi for report reason the field is not available - that's my problem
    Hope that I was more clear this time.
    Thanks and hear you soon!
    Claudiu

  • Internal assignment of asset number

    Hi Gurus,
    Kindly advice what are the settings needed so that during creation of asset, asset number is populated internally.
    Thanks in advance.

    Hi,
    In AS08 remove external number range check mark. you willget generation of internal number range.
    thanks
    G.Bharathi

  • Assignment of Asset Number to Group Asset

    Hi All,
    For our client they are using Group Asset for the calculation of Income Tax Depreciation (Depreciation Aea:15), actually he is having two types of Land 1. Free hold land and 2. normal Land.  They created total 5 asset through(AS01) like 10000, 10001,10002,10003 and 10004.  and a Group asset through (AS21) 110000 and assigned all these assets in one group asset but they want to create two Group assets 1. 10000 & 10001 2. 10002,10003 & 10004 as another Group asset for income tax depreciation purpose. Can somebody give me the suggetion how to create 2 group assets.
    Regards,
    R.K

    Hi Raghavendran,
    For the Group Asset they assigned the Depreciation Key:LINK(Straight line from acquisition value to Zero without Interest) for all the assets becuase of that it is calculating depreciation (i.e., Asset Value/No. of years) as we know for Free Hold Land Depreciation won't be calculated. For that we want to created another Group Asset with Depreciation Key: 0000(No depreciation and no interest), i want the procedure of how to create 2 group assets (1. with assets 10000 & 10001 and the other with assets 10002,10003 & 10004).
    Regards,
    R.K

  • How Asset number should appear in Non-asset PR

    Hi,
    We have a requirement about integration of PR --> PO --> FS10N.
    Scenario: - We enter an Asset number in Non-asset PR (should not be Account assignment category 'A') in any column like any text field etc. After that, that Asset Number should indicate in PO in any column or field.
    After all, it should display in FS10N also.
    How it's possible???

    Hi, enter asset in text field in PR,then copy it in PO with BADI, then copy it to any field in BSEG with BTE(tcode FIBF). But I'm not shore about your question "it should display in FS10N also". You want to see it in total table, or in items?

  • AUTOMATIC MAPPING OF ASSET SUB NUMBER IN PO IN ITEM DETAILS

    Hi Guruz,
    i have an urgent issue regarding asset topic and sub number.
    my issue is my client purchased 100 computer sets. Each computer set has an unique asset number. now we are using multiple account assignment concept. Earlier my client use to purchase 100 computers by including 100 line items in the purchase order in item overview each having an asset number(that belongs to a particular asset class which is in turn assigned to one G/L account). So we can see that it is a very lengthy job. Instead my client wants that they should enter only one line item containing the asset number in the item overview of the PO.
    At present we are using multiple account assignment as we are creating the asset sub number under one main asset.
    With this we are able to prevent entering 100 line items in the item overview but we are entering the 100 sub number data in item details of the PO.
    item overview look out:
    Ex: asset no: 100268 quantity -100 price- 20000
    item detail look out:
    quantity asset sub number
    1 100268 1
    1 100268 2.....
    similarly upto 100......
    THis is done in account assignment tab of PO.
    REQUIREMENT:
    when i am giving asset number 100268 sysytem should automatically give/propose 100 sub number as we have defined 100 sub number in as11 for that asset number. I.e: when we are putting asset number 100268 in the item overview it should reflect 100 quantities in item detail.
    is it possible???
    pl discuss...
    in the sub item field the asset number 100268 will automatically divide into 100 sub numbers automatically.

    Hi,
    This is unfortunately not possible with standards but you may try using Badi ME_PROCESS_PO_CUST => PROCESS_ACCOUNT.
    Regards

  • How to assign Asset number to PP work center -reg

    Hi,
    When we create PP Work center  through CR01 can we assign the asset number ? 
    or   while creating asset number through AS01 can we assign the PP Work center ?
    Our major issue is
    FI : ASSET
    PM:Equipment
    PP: Workcenter
    we  are not able to link .  we need to have same cost center for all the three . but as of now we dont have the link for the three and what ever cost centers we assignsystem is accepting
    how to solve this ?
    i could not find any fields in work center either to assign asset or equipment ?
    only in equipment i can give PP work center but how it links all the three Asset , Equipment and Work center ?
    regards,
    madhu kiran.

    HI
    In euipment you can assign the PP work center and from the asset AS02/AS03 go to environment > additional  amster data > you can get the cost center assigned to asset fro this you can relate the cost center to all three.
    Hope it will help u
    Rgds
    Anupam Sharma

  • Item Category N (non-stock item) in BOM creation - Preq Generation

    Hi All
    I have a material component that is planned in APO and not in ECC6. We would like to keep the one BOM for the finished good. Problem is that when we perform the backflush in ECC6, the system wants to backflush the material and causes errors due to missing stock.
    So I assigned the material as a non stock item in the BOM but the system will auto generate  a purchase requisitions for Non stock bom components (item category N) when the process order is created. It is possible to turn off the auto creation of the purchase req for non stock bom components? 
    I have tried the following:
    - Explosion type in item data, created new key with 'Switch off planning' indicator set in system configuration
    - created new 'Z' item category with inventory management de-selected
    Both approaches causes system error: Puchase data of material in not maintained
    I also tried leaving as a stock item with the bulk material indicator selected in the item data. This does not work as the cif will then exclude the component when data is transferred to APO
    Funny enough, the system does not generate a purchase req for non stock bom items when using Repetitive Manufacturing. Any help will be greatly appreciated
    kind regards
    Grant brockelbank

    Hello Vivek
    Thank you for your response
    The item is a non stock item. I do not want this item to be backflushed at all. This can be achieved using the 'N' non stock item category but the problem is that the system will attempt to generate a purchase requisition when the process order is created.
    I do not want the system to generate a purchase req in ECC6 as this item is a planning material that is planned in APO (used for medium to long term planning in a simulation version). We are hoping to use the one Bom for ECC6 and APO planning. The generation of the purchase reqs is a bit of a waste as we will never convert them and there is potential to cause issues for purchasing.
    Any other thoughts?
    Thanks again for your help
    kind regards
    Grant

  • Non DB item in a base table block, gives frm-40202 error.

    Dear All,
    We are using forms6i as a front end. To simulate the error, consider the following example.
    1.Create a multirecord emp block.
    2.Add a non database item in the base table block.
    3.Assign any value to the non database item, in the when new record instance trigger.
    4.When i say F7 or F8, my block asking me like, field must be entered. Which means, my record status changed to Insert. But there is no change in base table record, since i modified only in the non base table item.
    Please validate, whether i am doing anything wrong in my technique.
    Regards,
    Balaji

    If you have a value to be used as the default value then you can use "Initial Value" property in the item level for the Non Database Item. If you do this it wont give you any problem during the query. If you create a new record then the value which you have put as the default will come automatically.

  • Individual serial number for a particular Item

    Hi,
    At reciept level when we are manually assigning Individual serial number for a particular Item in the serial entry Form (serial_entry Block).
    Manual process For 10 Quantity its ok, but is taking time for 1000 Quantity.
    Pls let us know if there any process to reduce manual activity to assigning Individual serial number for a particular Item in the serial entry Form (serial_entry Block).
    Thanx,

    You can receive by range.
    Enter the starting serial number, enter the qty and then Oracle will generate 1000 serial numbers automatically.
    See http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/po/connum.htm
    Hope this answers your question,
    Sandeep Gandhi

  • In Capital P.O - Multiple asset number in a single line item

    Hi friends,
    My Client is using SAP 4.7. In capital P.O selecting account assignment as 'A'  asset and entering in description as Laptop 5 Qtys in a single line item. in item details account assignment tab its asking to enter asset. I'm able to select only one asset number. But my client requirement is it should ask to enter 5 asset number....
    Pls anyone give solution for the above scenario....
    very urgent.... pls

    Hi,
    1st check in OME9 t.code for account assignment A, the selection of 2(Multiple account ***)in field ID: AcctAssgt Scrn and Distribution field as 1 and save.
    Then during capital P.O. creation for single line item & in Item details TAB, in account assignment segment, you can enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with asset number(A2) with G/L account ( different G/L Account) OR enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with another asset number(A2) with G/L account (same G/L Account)
    Option-1----> In account assignment segment , As you needed
    G/L account----
    Asset
    12345u2026u2026u2026u2026u2026u2026u2026u2026A1
    12346u2026u2026u2026u2026u2026u2026u2026u2026A2
    12347u2026u2026u2026u2026u2026u2026u2026u2026A3
    12348u2026u2026u2026u2026u2026u2026u2026u2026A4
    12349u2026u2026u2026u2026u2026u2026u2026u2026A5
    Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
    Vendor A/C: Cr
    G/L account (12345): Dr
    G/L account (12346): Dr
    G/L account (12347): Dr
    G/L account (12348 ):Dr
    G/L account (12349 ):Dr
    Option-2---> In account assignment segment , You can have also
    G/L account----
    Asset
    12345u2026u2026u2026u2026u2026u2026u2026u2026A1
    12345u2026u2026u2026u2026u2026u2026u2026u2026A2
    12345u2026u2026u2026u2026u2026u2026u2026u2026A3
    12345u2026u2026u2026u2026u2026u2026u2026u2026A4
    12345u2026u2026u2026u2026u2026u2026u2026u2026A5
    Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
    Vendor A/C: Cr
    G/L account (12345): Dr
    Regards,
    Biju K

  • Assign the Asset "Tag Number" at PO receipt stage

    Our customer has a requirement to enter the Asset Tag Number for an item when the purchase order is receipted (or even at inspection stage for 4-way match PO's). The tag number entered, should then flow through to the FA module.
    Does anyone know if this can be achieved with standard functionality, or if it can be done with a customization?
    Here is the basic flow steps, the words in brackets () are the change we're looking for.
    1. Create PO for item coded to asset clearing account
    2. Receipt PO (and assign the Asset Tag Number)
    3. Match the PO to the AP invoice.
    4. Validate and account the AP invoice and transfer that to GL.
    5. Run the Mass Additions Create Process
    6. Find the Asset in Mass Additions Create (the Tag Number field should be populated with the value entered in step 2)
    7. Post Asset

    Hi,
    This is unfortunately not possible with standards but you may try using Badi ME_PROCESS_PO_CUST => PROCESS_ACCOUNT.
    Regards

  • Asset procurement & Non stock item procurement

    Hi,
    I want to procure Asset items. For that do i need to maintain asset master & material master both. Than create Purchase order with AAC as A. Will the PO be framework order or standard PO?Can anyone pls let me know the steps
    Also for non stock items do i have to do GR. In that case the goods are coming to stock as i have to give storage location during migo. What is the procedure?

    Hi,
    For procuring Assets, you will have to maintain Asset master & material master both in your system. You place a PO for the material (which you define as your asset & want to capitalize) & maintain AAC as A- Asset. Then at the item level, you assign the asset code to the masterial. After you post the GRN, the debit entries are posted to the asset.
    You have to post the GR for non stock items as well as stock items. The non stock item will be consumed dirctly to the acount assignment you have mentioned. For stock item, the inventory posting will be done. For stock item, the storage location will flow from the PO (if mentioned) otherwise you will have to post it yourself at MIGO in tab 'Where' at Storage Location'.
    Regards,
    Prashant Kolhatkar

  • How to capitalise those non inventory items (no mat #) to asset?

    Hi,
    We created a PO few month ago. PO with expenses item (account assignment K, charge to cost center). We have performed GR, IR, Payment to vendor. Now, business request to capitalize it to Asset, instead of charge out.
    We are impossible to reverse payment, reverse GR, and amend the PO.
    Please suggest me how to capitalise this non inventory item to asset? Thanks

    Go to F-02
    Dr PK = 70 and Account is your asset ; Transaction type = 100
    Cr PK = 50 and Acccount is your GL account where you posted earlier
    To know the GL account posted earlier goto PO/item/Account Assignment.
    Srinivas

Maybe you are looking for