Assignment of more than 1 Derived Flows in Business Partner Master

Hello,
As per business logic, brokerage commission is required to be paid @ 1% and TDS on interest to be deducted @ 10 %
I have been able to define 2 derived flows - one for Brokerage Commission and another one for TDS deduction.
In the Business Partner Master Data screen - Company Code data - SI:Derived Flows, i was able to assign the Brokerage Calculation Procedure under 51A Fixed Deposits - 200 Borrowing. However, to the same Business Partner i am unable to assign the TDS procedure at the same place.
Is it possible to assign more than 1 Procedures in a Business Partner Master Data.
Request your suggestions.
Thanks,
Murtuza.
+91 99232 05169

Hi,
For 1 business partner, for the same product type and transaction type you can define only 1 procedure in a company code.
But for your case instead of having 2 different procedures, have the rules for both the flows in the same procedure. Anyway rules are specific for a flow type only.
Regards,
Ravi

Similar Messages

Workflow task Assignment to more than one agent

Hi
Does anyone know about Workflow task Assignment to more than one agent.
This mena at one point there will be more than one approver..
Regards,
Anand

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

Can a personnel area be assigned to more than one company code?

Hi experts,
Can a personnel area be assigned to more than one company code?
Regards,
Anita George

Yes, as Siva said it is not possible.
Between personnel area and company code -
many to one mapping is allowed but one to many is not allowed. That is you can map more than one PA to 1 company code but 1 PA can not be map to more than one company code.

MM_SPTOCK - Problems when Material assigned to more than one Batch Id

Hi Experts,
We are using MM_SPSTOCK object for archiving Batch Records. While executing this Archiving object ,Suppose we have a case where there exists a material assigned to more than one batch .Lets Say B1 and B2 for Material M1. If we are interested to archive the Batch record M1 B1 then M1 B2 also getting archived even though the batch B2 is not specified in the selection criteria of MM_SPSTOCK .This leads to Data inconsistency.Is there anything that we need to do in order to save the second batch record getting archived.Please suggest.Let me know if you need any information
Kind regards,

Hi All,
Let me know if you come across this situation anytime and have a work around for this.

Asset Master to be assigned to more than one WBS element

Hi Guys
I have a scenario in which a Asset should be assigned to more than one Project, i.e. WBS Element.
Is it possible by any way to assign a asset to more than one WBS element.
Warm Regards
Bala

Hi Vijay Kumar
Your right, but my situation is different.
Take an example, i have server in a software company, that will be used for more than one project. In this case the asset number is the same as the same asset is used for different project at a given point of time
Warm Regards
Bala

Plant assignment to more than one sales org

We have a business process where certain products made in one plant have to be sold to two sales organizations depending on certain conditions defined in the sales view of the material master. How can this be achieved? Currently system does not allow for plant assignment to more than one sales org?

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

Preparing the Assignment of the BW/SUS User to a Business Partner ID

Hello people, i need help in this following scenario...any help would be
deeply appreciated.
When a new user is created in the
SAP SUS system, it will automatically be created in SAP
BW,
too.
At the same time, an internal table (SRM_USER_SUPBPID) is filled automatically. The table
contains the assignment between the automatically created
SAP BW user and the
corresponding Business Partner ID of the supplier company.
Procedure
Make su...
1. Make sure that the BAdI SMUM_USR_CREATE_POST has been transported into your
SAP BW system and has been activated. This BAdI is required for the automatic
creation of a
BW user.
Menu Path in the BW System Transaction Code
Business Add-Ins: Initial Definition
Maintenance Screen
SE18
2. Make sure that the implementation RSSBR_SMUM_CRM_SUS for the BAdI
SMUM_USR_CREATE_POST is activated in your
SAP BW system. To activate it, use
transaction SE19, enter
RSSBR_SMUM_CRM_SUS and click on Change . Then choose
Activate
. This implementation is necessary for the assignment of the SAP BW user to
a business partner in the internal table.
regards
sandeep salaria

hi,
In Web UI scenario:
If you have BuilEmp object, then you can get BP_NUMBER using the relation BuilEmpToHeaderRel.
for ex:
lr_header ?= lr_builemp->get_related_entity( iv_relation_name = 'BuilEmpToHeaderRel' ).
lv_bp_number = lr_header->get_property_as_string( iv_attr_name = 'BP_NUMBER' ).
regards
Ismail

More than one text area on a slide master... how?

Is it possible to define more than one text area on a master slide? If so how?
I want to have a layout with two columns of text - a fairly common layout in presentation packs - but can't persuade Keynote to accept this as a layout for a template. I realise that there can only be one 'body' area, but any attempt to produce a 'fake' second body area fails - whether I put in a text box or a shape with text in.
If I put it in as a text box, I can't put a limit on how big the box is.
If I put it in as a shape with text in, when I try to enable the shape as a text placeholder, it forces the whole text in box to have same format as 'top level' outline.
Any ideas?

If you want two columns of text, why not set up the Body textbox with two columns? Select the Body textbox on the slide master, then in the Text Inspector, in the Columns tab, set however many columns you want.

Approval required for assignment of more than one Role+AccessPolicy

Hi,
we noticed the following behavior with OIM11gR2 (11.1.2.0.0):
2 Role each one with it own Access Policy to provision AD resource
case 1: if we request one Role at time by Catalog, no approval is required
case 2 if we assign both Roles at same time by Catalog, one Request that requires approval il generated
Questions:
1. Is it default behavior?
2. Is it possibile to avoid approval step for case 2? If yes, is there any side-effects removing the approval step?
Thanks

kumarsubhrata wrote:
Dear friends,
>
> I have a depot plant and there Excise Registration No is 12. Excise Registration 12 have a single Series group 121 this time, where all entries (RG23D) are entered.
> But, my customer needs one more Series Group to be assigned with Excise Registration 12 i.e. 122.
> Actually they want separate Series Group for Depot Sales and Inventory Posting i.e. 121 for Depot Sales and 122 for Inventory Posting.
>
> Please suggest me that is it possible to assign 2 Series Group for single Excise Registration for Depot Plant?
>
>
>
> Thanks in advance.
> Kumar Subhrata
Hi,
It is very much possible. Configure that settings in the IMG path
SPRO -> Logistics - General -> Tax on Goods Movements -> India -> Basic Settings -> Maintain Series Groups
Click on new entries and enter 122 and assign excise registration 12 to it.

Add some more marketing attributes to an existing Business partner ( BP ).

Hi...
I need to add marketing attributes to an existing BP without deleting the previous ones.
If i use CRM_MKTBP_ASSIGN_ATTRIBUT_TAB the old ones are get deleted.
Please help me out.
Regards,
Swati

Hi Swati,
Can you try with FM CRM_MKTBP_ASSIGN_ATTRIBUT ?
There fill the following parameters:
IV_ATNAME = Characteristic attribute id
IV_ATTRIBUTE_SET = Characteristic attribute set
IV_ATWRT = Characteristic attribute value
IT_PARTNER = Fill with partner GUID and Partner ID
Leave the other parameters with default values.
Hope that helps!
Kind regards,
Garcia

Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

More than one OPENING in FLOW_TYPE in the S Dimension

Dear BPC Experts:
        I am using BPC 7.5 NW SP09 now, and need to create more than one Opening flow members.
Can I give FLOW_TYPE OPENING to each opening flow member? Does such config affect the default caculation
behind system? Like currency conversion or carry-forward business rules? Does anyone have similiar experience?
Or I just don't have set OPENING FLOW_TYPE to those many opening flows?
BRs,
Fred Cheng

Hi,
Let me try to explain this.
Lets say you have 2 accounts - ACC1 and ACC2.
If you want to have opening flow for each of the accounts in the account dimension, itself, then you will have soemthing like
ACC1
   ACC1OPE
ACC2
   ACC2OPE
So, you see, the number of members can increase tremendously.
To overcome this problem, we use the subtable type of dimension. In this dimension, you will have only one member for opening flow - OPE
No, the if you look at the data region ACC1 and OPE, it will show you the opening value of ACC1,
Similarly, if you look at the region ACC2 and OPE, it will show you the opening value of ACC2.
Hope you got the idea, now.

How to save more than one Contact Person in CRM

Hi experts,
                 How to save more than one contact persons in CRM opportunity Application?
I am using following Function Module...
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
      it_partner        = lt_partner_com
    CHANGING
      ct_input_fields   = lt_input_fields
    EXCEPTIONS
      error_occurred    = 1
      document_locked   = 2
      no_change_allowed = 3
      no_authority      = 4
      OTHERS            = 5.
I am giving the input field name as 'PARTNER_FCT', 'PARTNER_NO', 'DISPLAY_TYPE', 'NO_TYPE', 'MAIN_PARTNER' and 'RELATION_PARTNER'.
The problem is it is saving only one contact person, not more than one.
Please help me how to save more than one contact persons.

In SPRO partner processing this needs to be configured.

How to create one master with more than one detail

Hi
I am using jdev 11.1.2.1.0
I want to add more than one detail view object under one master view object in application module
Please solve this asap
Thanks

Hi Frank
I have 5 view objects (Suppose A,B,C,D,E) and I have created view links between them like
A->B
A->C
A->D
A->E
Then I am shuttling views in Application module (In Data model Tab) to create A as master and rest as details.
But it is not creating as i want.
I add new instance of view object independently.
Please solve this
Thanks
Edited by: 7668489779 on ३० अप्रैल, २०१२ ४:०७ अपराह्न

SAP Add on crash when use logon to more than one company

I have a client logon to 2 companies simultaneously and SAP CR give an error "SAP CR encountered problem and needs to close".
From the reply I receive in SAP Add On post, this is a known issue for Add on.
I believe it is a common expectation that users can logon to more than one companies and SAP Business One and all its add on can function properly.
It is a reasonable expectation and hope something can be done about this.

No reply, Just to close the post.

Assignment of more than 1 Derived Flows in Business Partner Master

Similar Messages

Maybe you are looking for